Next Article in Journal
Photoplethysmography Signal Wavelet Enhancement and Novel Features Selection for Non-Invasive Cuff-Less Blood Pressure Monitoring
Next Article in Special Issue
Computation of the Characteristic Parameters of Coaxial Waveguides Used in Precision Sensors
Previous Article in Journal
Using Ballistocardiogram and Impedance Plethysmogram for Minimal Contact Measurement of Blood Pressure Based on a Body Weight-Fat Scale
Previous Article in Special Issue
Concept and Implementation of Measurement Systems for Stationary and Remote Testing of Sensors for Electrical and Non-Electrical Quantities
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Low-Cost Data Acquisition System for Automotive Electronic Control Units

by
João Paulo Bedretchuk
,
Sergio Arribas García
,
Thiago Nogiri Igarashi
,
Rafael Canal
,
Anderson Wedderhoff Spengler
and
Giovani Gracioli
*
Software/Hardware Integration Lab, Federal University of Santa Catarina, Florianópolis 88040-900, Brazil
*
Author to whom correspondence should be addressed.
Sensors 2023, 23(4), 2319; https://doi.org/10.3390/s23042319
Submission received: 26 December 2022 / Revised: 15 February 2023 / Accepted: 16 February 2023 / Published: 19 February 2023

Abstract

The vehicle testing–validation phase is a crucial and demanding task in the automotive development process for vehicle manufacturers. It ensures the correct operation, safety, and efficiency of the vehicle. To meet this demand, some commercial solutions are available on the market, but they are usually expensive, have few connectivity options, and are PC-dependent. This paper presents an IoT-based intelligent low-cost system for vehicle data acquisition during on-road tests as an alternative solution. The system integrates low-cost acquisition hardware with an IoT server, collecting and transmitting data in near real-time, while artificial intelligence (AI) algorithms process the information and report errors and/or failures to the manufacturing engineers. The proposed solution was compared with other commercial systems in terms of features, performance, and cost. The results indicate that the proposed system delivers similar performance in terms of the data acquisition rate, but at a lower cost (up to 13 times cheaper) and with more advanced features, such as near real-time intelligent data processing and reduced time to find and correct errors or failures in the vehicle.
Keywords: acquisition system; electronic control unit (ECU); vehicle testing; hardware; controller area network (CAN) acquisition system; electronic control unit (ECU); vehicle testing; hardware; controller area network (CAN)

Share and Cite

MDPI and ACS Style

Bedretchuk, J.P.; Arribas García, S.; Nogiri Igarashi, T.; Canal, R.; Wedderhoff Spengler, A.; Gracioli, G. Low-Cost Data Acquisition System for Automotive Electronic Control Units. Sensors 2023, 23, 2319. https://doi.org/10.3390/s23042319

AMA Style

Bedretchuk JP, Arribas García S, Nogiri Igarashi T, Canal R, Wedderhoff Spengler A, Gracioli G. Low-Cost Data Acquisition System for Automotive Electronic Control Units. Sensors. 2023; 23(4):2319. https://doi.org/10.3390/s23042319

Chicago/Turabian Style

Bedretchuk, João Paulo, Sergio Arribas García, Thiago Nogiri Igarashi, Rafael Canal, Anderson Wedderhoff Spengler, and Giovani Gracioli. 2023. "Low-Cost Data Acquisition System for Automotive Electronic Control Units" Sensors 23, no. 4: 2319. https://doi.org/10.3390/s23042319

APA Style

Bedretchuk, J. P., Arribas García, S., Nogiri Igarashi, T., Canal, R., Wedderhoff Spengler, A., & Gracioli, G. (2023). Low-Cost Data Acquisition System for Automotive Electronic Control Units. Sensors, 23(4), 2319. https://doi.org/10.3390/s23042319

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop