Next Article in Journal
Synchronous OEIC Integrating Receiver for Optically Reconfigurable Gate Arrays
Next Article in Special Issue
In-Situ Measurement of High-Temperature Proton Exchange Membrane Fuel Cell Stack Using Flexible Five-in-One Micro-Sensor
Previous Article in Journal
Analysis of the Appropriateness of the Use of Peltier Cells as Energy Sources
Previous Article in Special Issue
Large Out-of-Plane Displacement Bistable Electromagnetic Microswitch on a Single Wafer
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Nonlinear-Based MEMS Sensors and Active Switches for Gas Detection

Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-9600, Saudi Arabia
*
Author to whom correspondence should be addressed.
Sensors 2016, 16(6), 758; https://doi.org/10.3390/s16060758
Submission received: 31 March 2016 / Revised: 13 May 2016 / Accepted: 17 May 2016 / Published: 25 May 2016
(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering)

Abstract

The objective of this paper is to demonstrate the integration of a MOF thin film on electrostatically actuated microstructures to realize a switch triggered by gas and a sensing algorithm based on amplitude tracking. The devices are based on the nonlinear response of micromachined clamped-clamped beams. The microbeams are coated with a metal-organic framework (MOF), namely HKUST-1, to achieve high sensitivity. The softening and hardening nonlinear behaviors of the microbeams are exploited to demonstrate the ideas. For gas sensing, an amplitude-based tracking algorithm is developed to quantify the captured quantity of gas. Then, a MEMS switch triggered by gas using the nonlinear response of the microbeam is demonstrated. Noise analysis is conducted, which shows that the switch has high stability against thermal noise. The proposed switch is promising for delivering binary sensing information, and also can be used directly to activate useful functionalities, such as alarming.
Keywords: microbeam; gas sensor; active switch; microcontroller; nonlinear dynamics; metal-organic framework microbeam; gas sensor; active switch; microcontroller; nonlinear dynamics; metal-organic framework

Share and Cite

MDPI and ACS Style

Bouchaala, A.; Jaber, N.; Yassine, O.; Shekhah, O.; Chernikova, V.; Eddaoudi, M.; Younis, M.I. Nonlinear-Based MEMS Sensors and Active Switches for Gas Detection. Sensors 2016, 16, 758. https://doi.org/10.3390/s16060758

AMA Style

Bouchaala A, Jaber N, Yassine O, Shekhah O, Chernikova V, Eddaoudi M, Younis MI. Nonlinear-Based MEMS Sensors and Active Switches for Gas Detection. Sensors. 2016; 16(6):758. https://doi.org/10.3390/s16060758

Chicago/Turabian Style

Bouchaala, Adam, Nizar Jaber, Omar Yassine, Osama Shekhah, Valeriya Chernikova, Mohamed Eddaoudi, and Mohammad I. Younis. 2016. "Nonlinear-Based MEMS Sensors and Active Switches for Gas Detection" Sensors 16, no. 6: 758. https://doi.org/10.3390/s16060758

APA Style

Bouchaala, A., Jaber, N., Yassine, O., Shekhah, O., Chernikova, V., Eddaoudi, M., & Younis, M. I. (2016). Nonlinear-Based MEMS Sensors and Active Switches for Gas Detection. Sensors, 16(6), 758. https://doi.org/10.3390/s16060758

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop