Application of Blue Honeysuckle Powder Obtained by an Innovative Method of Low-Temperature Drying in Skincare Face Masks

Traditional technologies applied for obtaining plant raw materials for cosmetic production are based primarily on high-level processing, which is reflected in the qualitative composition of the resulting materials. By using low-temperature drying, it is possible to retain in the raw materials a range of valuable ingredients. In this study, blue honeysuckle powder was used as an ingredient of cosmetic face masks. The stability of the masks was evaluated. Dynamic viscosity, yield point and texture analysis of the cosmetics was performed. The color of the emulsions and the level of skin hydration after face mask application was determined. Emulsions were found to be stable. A decrease in dynamic viscosity of the emulsions as a function of increasing concentrations of the additive and under the conditions of rising rotational speed were observed. Similarly, an increase in the concentration of blue honeysuckle in the emulsions resulted in a decrease in the value of the yield point. Based on the results, it can be stated that the addition of blue honeysuckle caused a decrease in hardness of the masks, while the opposite trend was observed for adhesive force. It was found that an increase in the concentration of blue honeysuckle gave a reddish-yellow color to the samples. Corneometric assessment confirmed proper skin hydration after the application of the emulsions.