Search Results (56)

Ambient monitoring in chemical laboratories and industrial sites that use toxic, hazardous, or flammable materials is essential to protect the lives of workers, material resources, and infrastructure at these sites. In this research paper, we present an innovative approach for developing a low-cost and portable sensor node that detects and warns of hazardous chemical gas and vapor leaks. The system also enables leak location tracking using an indoor tracking and positioning system operating in ultra-wideband (UWB) technology. An array of sensors is used to detect gases, vapors, and airborne particles, while the leak location is identified through a UWB unit integrated with an Internet of Things (IoT) processor. This processor transmits real-time location data and sensor readings via wireless fidelity (Wi-Fi). The real-time indoor positioning system (IPS) can automatically select a tracking area based on the distances measured from the three nearest anchors of the movable sensor node. The environmental sensor data and distances between the node and the anchors are transmitted to the cloud in JSON format via the user datagram protocol (UDP), which allows the fastest possible data rate. A monitoring server was developed in Python to track the movement of the portable sensor node and display live measurements of the environment. The system was tested by selecting different paths between several adjacent areas with a chemical leakage of different volatile organic compounds (VOCs) in the test path. The experimental tests demonstrated good accuracy in both hazardous gas detection and location tracking. The system successfully issued a leak warning for all tested material samples with volumes up to 500 microliters and achieved a positional accuracy of approximately 50 cm under conditions without major obstacles obstructing the UWB signal between the active system units. Full article

WiFi (wireless fidelity) signals, renowned for their extensive coverage, absence of electromagnetic pollution, and robust penetration capabilities, are exceptionally well suited for serving as an external radiation source in target detection and environmental perception applications. The current paper delves into the viability of leveraging WiFi signals for the purpose of human behavior recognition. Initially, the paper elucidates the distinctive attributes of typical WiFi signals. Subsequently, it formulates a parametric mathematical model to represent human walking, encompassing an analysis of several prevalent translational and rotational motions. Building upon this human body kinematic model, this study generates echo data corresponding to human walking patterns. A comprehensive simulation, analysis, and validation of the micro-Doppler characteristics associated with various body parts and the whole body in motion are then conducted. The findings from these simulations and analyses affirm the efficacy of the proposed methodology. Full article

In today’s digital age, there is an increasing demand for integrated wireless and wired technologies; however, there is a difficulty in achieving secure and reliable communications within buildings and facilities. This paper presents a proposal for maintaining the infrastructure while expanding it to implement communication technologies with high transmission and reception speeds and high levels of data confidentiality to enhance the operational efficiency of organizations. Three main technologies have emerged as promising solutions for this purpose: Wi-Fi, Li-Fi, and BPL. Despite the advantages that each technology offers, some drawbacks appear in these technologies that affect data transmission. Wi-Fi, Li-Fi, and BPL can be combined to achieve maximum security and reduce noise and interference via the ESP8266 module. This combination could be an important step toward achieving an integrated and secure indoor communication system. The paper provides a comprehensive overview of the three techniques and how they are applied in practice. In addition, OSE, ABPF, and ASBF filters are used to detect and eliminate interference and attack secure internal networks. Full article

Wireless Fidelity (Wi-Fi) based positioning has gained popularity for accurate indoor robot positioning in indoor navigation. In daily life, it is a low-cost solution because Wi-Fi infrastructure is already installed in many indoor areas. In addition, unlike the Global Navigation Satellite System (GNSS), Wi-Fi is more suitable for use indoors because signal blocking, attenuation, and reflection restrictions create a unique pattern in places with many Wi-Fi transmitters, and more precise positioning can be performed than GNSS. This paper proposes a machine learning-based method for Wi-Fi-enabled robot positioning in indoor environments. The contributions of this research include comprehensive 3D position estimation, utilization of existing Wi-Fi infrastructure, and a carefully collected dataset for evaluation. The results indicate that the AdaBoost algorithm attains a notable level of accuracy, utilizing the dBm signal strengths from Wi-Fi access points distributed throughout a four-floor building. The mean average error (MAE) values obtained in three axes with the Adaptive Boosting algorithm are 0.044 on the x-axis, 0.063 on the y-axis, and 0.003 m on the z-axis, respectively. In this study, the importance of various Wi-Fi access points was examined with explainable artificial intelligence methods, and the positioning performances obtained by using data from a smaller number of access points were examined. As a result, even when positioning was conducted with only seven selected Wi-Fi access points, the MAE value was found to be 0.811 for the x-axis, 0.492 for the y-axis, and 0.134 for the Z-axis, respectively. Full article

“Smart” devices, such as contemporary smartphones and PDAs (Personal Digital Assistance), play a significant role in our daily live, be it for navigation or location-based services (LBSs). In this paper, the use of Ultra-Wide Band (UWB) and Wireless Fidelity (Wi-Fi) based on RTT (Round-Trip Time) measurements is investigated for pedestrian user localization. For this purpose, several scenarios are designed either using real observation or simulated data. In addition, the localization of user groups within a neighborhood based on collaborative navigation (CP) is investigated and analyzed. An analysis of the performance of these techniques for ranging the positioning estimation using different fusion algorithms is assessed. The methodology applied for CP leverages the hybrid nature of the range measurements obtained by UWB and Wi-Fi RTT systems. The proposed approach stands out due to its originality in two main aspects: (1) it focuses on developing and evaluating suitable models for correcting range errors in RF-based TWR (Two-Way Ranging) technologies, and (2) it emphasizes the development of a robust CP engine for groups of pedestrians. The results obtained demonstrate that a performance improvement with respect to position trueness for UWB and Wi-Fi RTT cases of the order of 74% and 54%, respectively, is achieved due to the integration of these techniques. The proposed localization algorithm based on a P2I/P2P (Peer-to-Infrastructure/Peer-to-Peer) configuration provides a potential improvement in position trueness up to 10% for continuous anchor availability, i.e., UWB known nodes or Wi-Fi access points (APs). Its full potential is evident for short-duration events of complete anchor loss (P2P-only), where an improvement of up to 53% in position trueness is achieved. Overall, the performance metrics estimated based on the extensive evaluation campaigns demonstrate the effectiveness of the proposed methodologies. Full article

The IEEE 802.11bf-based wireless fidelity (WiFi) indoor positioning system has gained significant attention recently. It is important to recognize that multi-user online positioning occurs in real wireless environments. This paper proposes an indoor positioning sensing strategy that includes an optimized preprocessing process and a new machine learning (ML) method called NKCK. The NKCK method can be broken down into three components: neighborhood component analysis (NCA) for dimensionality reduction, K-means clustering, and K-nearest neighbor (KNN) classification with cross-validation (CV). The KNN algorithm is particularly suitable for our dataset since it effectively classifies data based on proximity, relying on the spatial relationships between points. Experimental results indicate that the NKCK method outperforms traditional methods, achieving reductions in error rates of $82.4\%$ compared to naive Bayes (NB), $85.0\%$ compared to random forest (RF), $72.1\%$ compared to support vector machine (SVM), $64.7\%$ compared to multilayer perceptron (MLP), $50.0\%$ compared to density-based spatial clustering of applications with noise (DBSCAN)-based methods, $42.0\%$ compared to linear discriminant analysis (LDA)-based channel state information (CSI) amplitude fingerprinting, and $33.0\%$ compared to principal component analysis (PCA)-based approaches. Due to the sensitivity of CSI, our multi-user online positioning system faces challenges in detecting dynamic human activities, such as human tracking, which requires further investigation in the future. Full article

In the modern world of human–computer interaction, notable advancements in human identification have been achieved across fields like healthcare, academia, security, etc. Despite these advancements, challenges remain, particularly in scenarios with poor lighting, occlusion, or non-line-of-sight. To overcome these limitations, the utilization of radio frequency (RF) wireless signals, particularly wireless fidelity (WiFi), has been considered an innovative solution in recent research studies. By analyzing WiFi signal fluctuations caused by human presence, researchers have developed machine learning (ML) models that significantly improve identification accuracy. This paper conducts a comprehensive survey of recent advances and practical implementations of WiFi-based human identification. Furthermore, it covers the ML models used for human identification, system overviews, and detailed WiFi-based human identification methods. It also includes system evaluation, discussion, and future trends related to human identification. Finally, we conclude by examining the limitations of the research and discussing how researchers can shift their attention toward shaping the future trajectory of human identification through wireless signals. Full article

Power quality measurements are essential to monitor, analyse and control the operation of smart grids within power systems. This work aims to develop and calibrate a PQ network analyser. As the penetration of non-linear loads connected to power systems is increasing every day, it is essential to measure power quality. In this sense, a power quality (PQ) analyser is based on the high-speed sampling of electrical signals in single-phase and three-phase electrical installations, which are available in real time for analysis using wireless Wi-Fi (Wireless-Fidelity) networks. The PQAE (Power Quality Analyser Embedded) power quality analyser has met the calibration standards for Class A devices from IEC 61000-4-30, IEC 61000-4-7 and IEC 62586-2. In this paper, a complete guide to the tests included in this standard has been provided. The Fast Fourier Transform (FFT) obtains the harmonic components from the measured signals and the window functions used reduce spectral leakage. The window size depends on the fundamental frequency of, intensity of and changes in the signal. Harmonic measurements from the 2nd to 50th harmonics for each phase of the voltage and each phase and neutral of the current have been performed, using the Fast Fourier transform algorithm with various window functions and their comparisons. PQAE is developed on an open-source platform that allows you to adapt its programming to the measurement needs of the users. Full article

Sleep apnea, characterized by breathing interruptions or slow breathing at night, can cause various health issues. Detecting respiratory rate (RR) using Wireless Fidelity (Wi-Fi) can identify sleep disorders without physical contact avoiding sleep disruption. However, traditional methods using Network Interface Cards (NICs) like the Intel Wi-Fi Link 5300 NIC are often costly and limited in channel state information (CSI) resolution. Our study introduces an effective strategy using the affordable ESP32 single-board computer for tracking RR through detailed analysis of Wi-Fi signal CSI. We developed a technique correlating Wi-Fi signal fluctuations with RR, employing signal processing methods—Hampel Filtering, Gaussian Filtering, Linear Interpolation, and Butterworth Low Pass Filtering—to accurately extract relevant signals. Additionally, noise from external movements is mitigated using a Z-Score for anomaly detection approach. We also implemented a local peak function to count peaks within an interval, scaling it to bpm for RR identification. RR measurements were conducted at different rates—Normal (12–16 bpm), Fast (>16 bpm), and Slow (<12 bpm)—to assess the effectiveness in both normal and sleep apnea conditions. Tested on data from 8 participants with distinct body types and genders, our approach demonstrated accuracy by comparing modeled sleep RR against actual RR measurements from the Vernier Respiration Monitor Belt. Optimal parameter settings yielded an overall average mean absolute deviation (MAD) of 2.60 bpm, providing the best result for normal breathing (MAD = 1.38). Different optimal settings were required for fast (MAD = 1.81) and slow breathing (MAD = 2.98). The results indicate that our method effectively detects RR using a low-cost approach under different parameter settings. Full article

Violence, a pervasive societal concern, demands innovative approaches for its early detection and prevention. This review paper explores the intersection of violence detection and wireless fidelity (Wi-Fi), alongside fifth-generation (5G) and sixth-generation (6G) mobile technologies. Wi-Fi sensing, initially employed for human activity detection, has also demonstrated versatility across a number of other important applications. The significance of leveraging Wi-Fi sensing for violence detection is investigated, underscoring its ability to enhance security protocols and minimise response time. Moreover, through the development and use of machine learning algorithms to analyse and interpret intricate channel state information (CSI) features, the accuracy of violence detection can be improved. Furthermore, this investigation delves into the rapidly developing domain of mobile sensing, examining its contribution to the advancement of violence detection functionalities. The potential convergence of 5G and forthcoming 6G sensing technologies increases the effectiveness of violence detection. Through an analysis of Wi-Fi and mobile sensing technologies, this review paper highlights the transformative capacity that their integration may have on approaches to violence prevention and response. Full article

In this paper, a novel input impedance analysis methodology based on Babinet’s principle to broaden bandwidth is proposed, and a broadband multiple-input and multiple-output (MIMO) antenna system is designed, fabricated, and measured for fifth-generation (5G) and Wireless Fidelity (Wi-Fi) 6E/7 mobile applications. By analyzing the input impedance of open-slot antennas and planar monopole antennas using numerical calculations, the characteristics of the input impedance can be obtained. We find that combining the two antenna types in parallel can significantly enhance the bandwidth. Then, the four-dimensional image calculated by MATLAB based on the parallel impedance formula is processed to validate the methodology. Thus, a broad antenna element based on the impedance property analysis methodology is achieved, which operates ranging from 2.6 GHz to 7.46 GHz. Moreover, the equivalent circuit of the antenna element is established to further verify the validity of the methodology. Finally, a broadband MIMO antenna system consisting of eight antenna elements is designed, fabricated, and measured, and the isolation performance is better than 12 dB. Acceptable total efficiency higher than 45% is also obtained with envelope correlation coefficients (ECCs) lower than 0.05. The proposed impedance property analysis methodology innovatively proposes a new way to increase bandwidth, which can be widely applied in various antenna designs. Also, reasonable results show that the proposed MIMO antenna system is a good candidate for 5G and Wi-Fi 6E/7 mobile applications. Full article

Significant strides have been made in the field of WiFi-based human activity recognition, yet recent wireless sensing methodologies still grapple with the reliance on copious amounts of data. When assessed in unfamiliar domains, the majority of models experience a decline in accuracy. To address this challenge, this study introduces Wi-CHAR, a novel few-shot learning-based cross-domain activity recognition system. Wi-CHAR is meticulously designed to tackle both the intricacies of specific sensing environments and pertinent data-related issues. Initially, Wi-CHAR employs a dynamic selection methodology for sensing devices, tailored to mitigate the diminished sensing capabilities observed in specific regions within a multi-WiFi sensor device ecosystem, thereby augmenting the fidelity of sensing data. Subsequent refinement involves the utilization of the MF-DBSCAN clustering algorithm iteratively, enabling the rectification of anomalies and enhancing the quality of subsequent behavior recognition processes. Furthermore, the Re-PN module is consistently engaged, dynamically adjusting feature prototype weights to facilitate cross-domain activity sensing in scenarios with limited sample data, effectively distinguishing between accurate and noisy data samples, thus streamlining the identification of new users and environments. The experimental results show that the average accuracy is more than 93% (five-shot) in various scenarios. Even in cases where the target domain has fewer data samples, better cross-domain results can be achieved. Notably, evaluation on publicly available datasets, WiAR and Widar 3.0, corroborates Wi-CHAR’s robust performance, boasting accuracy rates of 89.7% and 92.5%, respectively. In summary, Wi-CHAR delivers recognition outcomes on par with state-of-the-art methodologies, meticulously tailored to accommodate specific sensing environments and data constraints. Full article

A Hybrid LiFi and WiFi network (HLWNet) integrates the rapid data transmission capabilities of Light Fidelity (LiFi) with the extensive connectivity provided by Wireless Fidelity (WiFi), resulting in significant benefits for wireless data transmissions in the designated area. However, the challenge of decision-making during the handover process in HLWNet is made more complex due to the specific characteristics of electromagnetic signals’ line-of-sight transmission, resulting in a greater level of intricacy compared to previous heterogeneous networks. This research work addresses the problem of handover decisions in the Hybrid LiFi and WiFi networks and treats it as a binary classification problem. Consequently, it proposes a handover method based on a deep neural network (DNN). The comprehensive handover scheme incorporates two sets of neural networks (ANN and DNN) that utilize input factors such as channel quality and the mobility of users to enable informed decisions during handovers. Following training with labeled datasets, the neural-network-based handover approach achieves an accuracy rate exceeding 95%. A comparative analysis of the proposed scheme against the benchmark reveals that the proposed method considerably increases user throughput by approximately 18.58% to 38.5% while reducing the handover rate by approximately 55.21% to 67.15% compared to the benchmark artificial neural network (ANN); moreover, the proposed method demonstrates robustness in the face of variations in user mobility and channel conditions. Full article

Localization in hospitals can be valuable in improving different services in medical environments. In this sense, an accurate location system in this environment requires adequately enabling communication technology. However, widely adopted technologies such as Wireless Fidelity (WiFi), Bluetooth, and Radio Frequency Identification (RFID) are considered poorly suited to enable hospital localization due to their inherent drawbacks, including high implementation costs, poor signal strength, imprecise estimates, and potential interference with medical devices. The increasing expenses associated with the implementation and maintenance of these technologies, along with their limited accuracy in dynamic hospital environments, underscore the pressing need for alternative solutions. In this context, it becomes imperative to explore and present novel approaches that not only avoid these challenges but also offer more cost effective, accurate, and interference-resistant connectivity to achieve precise localization within the complex and sensitive hospital environment. In the quest to achieve adequate localization accuracy, this article strategically focuses on leveraging Visible Light Communication (VLC) as a fundamental technology to address the specific demands of hospital environments to achieve the precise localization and tracking of life-saving equipment. The proposed system leverages existing lighting infrastructure and utilizes three transmitting LEDs with different wavelengths. The Received Signal Strength (RSS) is used at the receiver, and a trilateration algorithm is employed to determine the distances between the receiver and each LED to achieve precise localization. The accuracy of the localization is further enhanced by integrating a trilateration algorithm with the sophisticated Particle Swarm Optimization (PSO) algorithm. The proposed method improves the localization accuracy, for example, at a height of 1 m, from a 11.7 cm error without PSO to 0.5 cm with the PSO algorithm. This enhanced accuracy is very important to meet the need for precise equipment location in dynamic and challenging hospital environments to meet the demand for life-saving equipment. Furthermore, the performance of the proposed localization algorithm is compared with conventional positioning methods, which denotes improvements in terms of the localization error and position estimation. Full article

With the rapid rise of digitalization in the global economy, home security systems have become increasingly important for personal comfort and property protection. The collaboration between humans, the Internet of Things (IoT), and smart homes can be highly efficient. Interaction considers convenience, efficiency, security, responsiveness, and automation. This study aims to develop and assess IoT-based home security systems utilizing passive infrared (PIR) sensors to improve user interface, security, and automation controls using voice commands and buttons across different communication protocols. The proposed system incorporates controls for lighting and intrusion monitoring, as well as assessing both the functionality of voice commands and the precision of intruder detection via the PIR sensors. Intelligent light control and PIR intruder detection with a variable delay time for response detection are unified into the research methodology. The test outcomes examine the average effective response time in-depth, revealing performance distinctions among wireless fidelity (Wi-Fi) and fourth- and fifth-generation mobile connections. The outcomes illustrate the reliability of voice-activated light control via Google Assistant, with response accuracy rates of 83 percent for Thai voice commands and 91.50 percent for English voice commands. Moreover, the Blynk mobile application provided exceptional precision regarding operating light-button commands. The PIR motion detectors have a one hundred percent detection accuracy, and a 2.5 s delay is advised for PIR detection. Extended PIR detection delays result in prolonged system response times. This study examines the intricacies of response times across various environmental conditions, considering different degrees of mobile communication quality. This study ultimately advances the field by developing an IoT system prepared for efficient integration into everyday life, holding the potential to provide improved convenience, time-saving effectiveness, cost-efficiency, and enhanced home security protocols. Full article