Search Results (167)

This study developed a model to predict ships with high deficiency risk under Port State Control (PSC) through machine learning techniques, particularly the Random Forest algorithm. The study utilized actual ship inspection data from the Port of Singapore, comprehensively considering various operational and safety indicators of ships, including but not limited to flag state, ship age, past deficiencies, and detention history. By analyzing these factors in depth, this research enhances the efficiency and accuracy of PSC inspections, provides decision support for port authorities, and offers strategic guidance for shipping companies to comply with international safety standards. During the research process, I first conducted detailed data preprocessing, including data cleaning and feature selection, to ensure the effectiveness of model training. Using the Random Forest algorithm, I identified key factors influencing the detention risk of ships and established a risk prediction model accordingly. The model validation results indicated that factors such as ship age, tonnage, company performance, and flag state significantly affect whether a ship exhibits a high deficiency rate. In addition, this study explored the potential and limitations of applying the Random Forest model in predicting high deficiency risk under PSC, and proposed future research directions, including further model optimization and the development of real-time prediction systems. By achieving these goals, I hope to provide valuable experience for other global shipping hubs, promote higher international maritime safety standards, and contribute to the sustainable development of the global shipping industry. This research not only highlights the importance of machine learning in the maritime domain but also demonstrates the potential of data-driven decision-making in improving ship safety management and port inspection efficiency. It is hoped that this study will inspire more maritime practitioners and researchers to explore advanced data analytics techniques to address the increasingly complex challenges of global shipping. Full article

The maritime sector faces escalating demands to minimize emissions and optimize operational efficiency under tightening environmental regulations. Although technologies such as the Internet of Things (IoT), Artificial Intelligence (AI), and Digital Twins (DT) offer substantial potential, their deployment in real-time ship performance analytics is at an emerging state. This paper proposes a machine learning-driven framework for real-time ship performance management. The framework starts with data collected from onboard sensors and culminates in a decision support system that is easily interpretable, even by non-experts. It also provides a method to forecast vessel performance by extrapolating Key Performance Indicator (KPI) values. Furthermore, it offers a flexible methodology for defining KPIs for every crucial component or aspect of vessel performance, illustrated through a use case focusing on fuel oil consumption. Leveraging Artificial Neural Networks (ANNs), hybrid multivariate data fusion, and high-frequency sensor streams, the system facilitates continuous diagnostics, early fault detection, and data-driven decision-making. Unlike conventional static performance models, the framework employs dynamic KPIs that evolve with the vessel’s operational state, enabling advanced trend analysis, predictive maintenance scheduling, and compliance assurance. Experimental comparison against classical KPI models highlights superior predictive fidelity, robustness, and temporal consistency. Furthermore, the paper delineates AI and ML applications across core maritime operations and introduces a scalable, modular system architecture applicable to both commercial and naval platforms. This approach bridges advanced simulation ecosystems with in situ operational data, laying a robust foundation for digital transformation and sustainability in maritime domains. Full article

With the continuous expansion of global trade, achieving sustainable maritime transport optimization and operations has become a key strategic direction for transforming maritime transport companies. To summarize the current state of research and identify emerging trends in sustainable maritime transport optimization and operations, this study systematically examines representative studies from the past decade, focusing on three dimensions, technology, management, and policy, using data sourced from the Web of Science (WOS) database. Building on this analysis, potential avenues for future research are suggested. Research indicates that the technological field centers on the integrated application of alternative fuels, improvements in energy efficiency, and low-carbon technologies in the shipping and port sectors. At the management level, green investment decisions, speed optimization, and berth scheduling are emphasized as core strategies for enhancing corporate sustainable performance. From a policy perspective, attention is placed on the synergistic effects between market-based measures (MBMs) and governmental incentive policies. Existing studies primarily rely on multi-objective optimization models to achieve a balance between emission reductions and economic benefits. Technological innovation is considered a key pathway to decarbonization, while support from governments and organizations is recognized as crucial for ensuring sustainable development. Future research trends involve leveraging blockchain, big data, and artificial intelligence to optimize and streamline sustainable maritime transport operations, as well as establishing a collaborative governance framework guided by environmental objectives. This study contributes to refining the existing theoretical framework and offers several promising research directions for both academia and industry practitioners. Full article

Amid structural changes driven by the greening and digital transformation of the maritime industry, the demand for career transitions of seafarers with onboard experience to shore-based positions—particularly ship superintendents—is steadily increasing. However, the current lack of a systematic education and career development framework to support such transitions poses a critical challenge for shipping companies seeking to secure sustainable human resources. The aim of this study was to develop a competency-based training program that facilitates the effective transition of seafarers to shore-based ship superintendent roles. We integrated a developing a curriculum (DACUM) analysis with competency-based job analysis to achieve this aim. The core competencies required for ship superintendent duties were identified through three expert consultations. In addition, social network analysis (SNA) was used to quantitatively assess the structure and priority of the training content. The analysis revealed that convergent competencies, such as digital technology literacy, responsiveness to environmental regulations, multicultural organizational management, and interpretation of global maritime regulations, are essential for a successful career shift. Based on these findings, a modular training curriculum comprising both common foundational courses and specialized advanced modules tailored to job categories was designed. The proposed curriculum integrated theoretical instruction, practical training, and reflective learning to enhance both applied understanding and onsite implementation capabilities. Furthermore, the concept of a Seafarer Success Support Platform was proposed to support a lifecycle-based career development pathway that enables rotational mobility between sea and shore positions. This digital learning platform was designed to offer personalized success pathways aligned with the career stages and competency needs of maritime personnel. Its cyclical structure, comprising career transition, competency development, field application, and performance evaluation, enables seamless career integration between shipboard- and shore-based roles. Therefore, the platform has the potential to evolve into a practical educational model that integrates training, career development, and policies. This study contributes to maritime human resource development by integrating the DACUM method with a competency-based framework and applying social network analysis (SNA) to quantitatively prioritize training content. It further proposes the Seafarer Success Support Platform as an innovative model to support structured career transitions from shipboard roles to shore-based supervisory positions. Full article

Container terminals are facing significant challenges in meeting the increasing demands for volume and throughput, with limited space often presenting as a critical constraint. Key areas of concern at the quayside include the berth allocation problem, the quay crane assignment, and the scheduling problem. Effectively managing these issues is essential for optimizing port operations; failure to do so can lead to substantial operational and economic ramifications, ultimately affecting competitiveness within the global shipping industry. Optimization models, encompassing both mathematical frameworks and metaheuristic approaches, offer promising solutions. Additionally, the application of machine learning and reinforcement learning enables real-time solutions, while robust optimization and stochastic models present effective strategies, particularly in scenarios involving uncertainties. This study expands upon earlier foundational analyses of berth allocation, quay crane assignment, and scheduling issues, which have laid the groundwork for port optimization. Recent developments in uncertainty management, automation, real-time decision-making approaches, and environmentally sustainable objectives have prompted this review of the literature from 2015 to 2024, exploring emerging challenges and opportunities in container terminal operations. Recent research has increasingly shifted toward integrated approaches and the utilization of continuous berthing for better wharf utilization. Additionally, emerging trends, such as sustainability and green infrastructure in port operations, and policy trade-offs are gaining traction. In this review, we critically analyze and discuss various aspects, including spatial and temporal attributes, crane handling, sustainability, model formulation, policy trade-offs, solution approaches, and model performance evaluation, drawing on a review of 94 papers published between 2015 and 2024. Full article

The Three Gorges Reservoir Area in China presents a critical conflict between industrial development and ecological conservation. It functions as a key hub for water management, energy production, and shipping, while also serving as a vital zone for ecological and environmental protection. Focusing on Zigui County, this study developed a 16-indicator evaluation system integrating geological, ecological, and socioeconomic factors. It utilized the Analytic Hierarchy Process (AHP), coefficient of variation (CV), and the Real-Coded Accelerating Genetic Algorithm-Projection Pursuit (RAGA-PP) model for evaluation, the latter of which optimizes the projection direction and utilizes PP to transform high-dimensional data into a low-dimensional space, thereby obtaining the values of the projection indices. The findings indicate the following: (1) The RAGA-PP model outperforms conventional AHP-CV methods in assessing Zigui County’s eco-geological environment, showing superior accuracy (higher Moran’s I) and spatial consistency. (2) Hotspot analysis confirms these results, revealing distinct spatial patterns. (3) From 2000 to 2020, “bad” quality areas decreased from 17.31% to 12.33%, while “moderate” or “better” zones expanded. (4) This improvement reflects favorable natural conditions and reduced human impacts. These trends underscore the effectiveness of China’s ecological civilization policies, which have prioritized sustainable development through targeted environmental governance, afforestation initiatives, and stringent regulations on industrial activities. Full article

Ammonia is emerging as a promising zero-carbon marine fuel due to its high hydrogen density, low storage pressure, and long-term stability, making it well-suited for supporting sustainable maritime energy systems. However, its adoption introduces serious safety challenges, as its toxic, flammable, and corrosive properties pose greater risks than many other alternative fuels, necessitating rigorous risk assessment and safety management. This study presents a comprehensive investigation of potential ammonia leakage scenarios that may arise during the fuel gas supply process within confined compartments of marine vessels, such as the fuel preparation room and engine room. The simulations were conducted using FLACS-CFD V22.2, a validated computational fluid dynamics tool specialized for flammable gas dispersion and explosion risk analysis in complex geometries. The model enables detailed assessment of gas concentration evolution, toxic exposure zones, and overpressure development under various leakage conditions, providing valuable insights for emergency planning, ventilation design, and structural safety reinforcement in ammonia-fueled ship systems. Prolonged ammonia exposure is driven by three key factors: leakage occurring opposite the main ventilation flow, equipment layout obstructing airflow and causing gas accumulation, and delayed sensor response due to recirculating flow patterns. Simulation results revealed that within 1.675 s of ammonia leakage and ignition, critical impact zones capable of causing fatal injuries or severe structural damage were largely contained within a 10 m radius of the explosion source. However, lower overpressure zones extended much further, with slight damage reaching up to 14.51 m and minor injury risks encompassing the entire fuel preparation room, highlighting a wider threat to crew safety beyond the immediate blast zone. Overall, the study highlights the importance of targeted emergency planning and structural reinforcement to mitigate explosion risks in ammonia-fueled environments. Full article

This study examines the emissions generated by a tall ship of 81.36 m length under various operating conditions, focusing particularly on carbon dioxide emissions at different navigation speeds. The main purpose of the paper is to establish theoretical and practical methods for calculating and measuring the level of CO₂ emitted by the ship engines. Additionally, this article compares the results of carbon dioxide emission calculations based on theoretical methods with the results of real measurements. The paper verifies and assesses the carbon dioxide emission calculation methods compared to the emissions measured in real conditions for diesel engines. A comparative analysis of several methods for determining CO₂ emissions leads to much more accurate and conclusive results close to reality. The results obtained through empirical and theoretical methods for determining CO₂ emissions from the main engine demonstrate that the difference between these values is more accurate at lower engine loads but shows discrepancies at higher loads due to real-world inefficiencies, combustion variations, and model simplifications. The measured CO₂ emission values for auxiliary engines at 60% load demonstrate consistency and closely reflect real operating conditions, while analytical calculations tend to be higher due to theoretical losses and model assumptions. Stoichiometric values fall in between, assuming ideal combustion but lacking adjustments for real variables. This highlights the efficiency of the diesel generator and the importance of empirical data in capturing actual emissions more accurately. The investigation aims to provide a detailed understanding of CO₂ emission variations based on the ship’s operating parameters, including the study of these emissions at the level of the main diesel propulsion engine as well as the auxiliary engines. By analyzing these methods for determining engine emissions, conclusions can be reached about aspects such as the following: engine wear condition, efficiency losses, or incomplete combustion. This analysis has the potential to guide the implementation of new policies and technologies aimed at minimizing the carbon footprint of a reference ship, considering the importance of sustainable resource management and environmental protection in a viable long-term manner. Full article

Maritime transportation is crucial for global trade, yet it is a significant source of emissions. This study aims to enhance the operational efficiency and sustainability of container ports by accurately estimating energy needs. Analyzing data from 440 ships visiting a container port within a year, including parameters such as main engine (ME) power, auxiliary engine (AE) power, gross registered tonnage (GRT), twenty-foot equivalent unit (TEU), and hoteling time, regression analysis techniques were employed within MATLAB’s Regression Learner App. The model predicted future energy demands with an accuracy of 82%, providing a robust framework for energy management and infrastructure investment. The strategic planning based on these predictions supports sustainability goals and enhances energy supply reliability. The study highlights the dual benefit for port and ship owners in precise energy need assessments, enabling cost-effective energy management. This research offers valuable insights for stakeholders, paving the way for greener and more efficient port operations. Full article

Serving as critical sustainable transportation infrastructure, inland waterways provide dual socioeconomic and ecological value by (1) facilitating high-efficiency freight logistics through cost-effective bulk cargo transport while stimulating regional economic growth, and (2) delivering essential ecosystem services including flood regulation, water resource preservation, and biodiversity conservation. This study establishes a stakeholder-centered risk assessment framework to enhance decision-making of waterway engineering projects and promote the sustainable development of Inland Waterway Transport. We propose a three-layer approach: (1) identifying key stakeholders in the decision-making stage of waterway engineering projects through multi-dimensional criteria; (2) listing and classifying decision-making risks from the perspectives of managers, users, and other stakeholders; (3) applying the Decision-Making Trial and Evaluation Laboratory (DEMATEL) to prioritize key risks and proposing a risk assessment model based on fuzzy reasoning theory to evaluate decision-making risks under uncertain conditions. This framework was applied to the Yangtze River Trunk Line Wuhan–Anqing Waterway Regulation Project. The results show that the risk ranking is managers, users, and other stakeholders, among which the risk of engineering freight demand is particularly prominent. This suggests that we need to pay attention to optimizing material transportation and operational organization, promote the development of large-scale ships, and realize the diversification of ship types and transportation organizations. This study combines fuzzy reasoning with stakeholder theory, providing a replicable tool for the Waterway Management Authority to address the complex sustainability challenges in global waterway development projects. Full article

This study investigates the environmental and operational performance of X-DF and ME-GI propulsion systems in large LNG carriers, focusing on key emission and transport efficiency metrics—CO₂, the EEOI, and the CII—and their relationship with operational factors such as shaft power, vessel speed, propeller slip, and specific fuel oil consumption. Statistical methods including correlation analysis, regression modeling, outlier detection, and clustering are employed to evaluate engine behavior across the ship’s fuel gas steaming envelope and to identify critical efficiency trends. The results show that ME-GI engines deliver lower CO₂ emissions and consistent efficiency under steady-load conditions, due to their higher thermal efficiency and precise control characteristics. In contrast, X-DF engines demonstrate greater adaptability, leveraging LNG combustion to achieve cleaner emissions and optimal performance in specific operational clusters. Clustering analysis highlights distinct patterns: ME-GI engines excel with optimized shaft power and RPM, while X-DF engines achieve peak efficiency through adaptive load and fuel management. These findings provide actionable insights for integrating performance indicators into SEEMP strategies, enabling targeted emission reductions and fuel optimization across diverse operating scenarios—thus supporting more sustainable maritime transport. Full article

Amid the dual imperatives of global trade expansion and low-carbon transition, intelligent maritime shipping has emerged as a central driver for the innovation of international logistics systems, now entering a critical window period for the deep integration of Internet technologies and automated port infrastructure. While existing research predominantly focuses on isolated applications of intelligent technologies, systematic evaluations of the synergistic effects of technological integration on maritime ecosystems, policy compatibility, and contributions to global carbon emission governance remain under-explored. Leveraging bibliometric analysis, this study systematically examines 488 publications from the Web of Science (WoS) Core Collection (2000–2024), yielding three pivotal findings: firstly, China dominates the research landscape, with a 38.5% contribution share, where Artificial Intelligence (AI), the Internet of Things (IoT), and port automation constitute the technological pillars. However, critical gaps persist in cross-system protocol standardization and climate-adaptive modeling, accounting for only 2.7% and 4.2% of the literature, respectively. Secondly, international collaboration networks exhibit pronounced “Islamization”, characterized by an inter-team collaboration rate of 17.3%, while the misalignment between rapid technological iteration and existing maritime regulations exacerbates industry risks. Thirdly, a dual-track pathway integrating Cyber–Physical System (CPS)-based digital twin ports and open-source vertical domain-specific large language models is proposed. Empirical evidence demonstrates its efficacy in reducing cargo-handling energy consumption by 15% and decision-making latency by 40%. This research proposes a novel tripartite framework, encompassing technological, institutional, and data sovereignty dimensions, to resolve critical challenges in integrating multi-source maritime data and managing cross-border governance. The model provides academically validated and industry-compatible strategies for advancing sustainable maritime intelligence. Subsequent investigations should expand data sources to include regional repositories and integrate interdisciplinary approaches, ensuring the adaptability of both technical systems and international policy coordination mechanisms across diverse maritime ecosystems. Full article

This paper provides a comprehensive review of hybrid energy systems (HESs), focusing on their challenges, optimization techniques, and control strategies to enhance performance, reliability, and sustainability across various applications, such as microgrids (MGs), commercial buildings, healthcare facilities, and cruise ships. The integration of renewable energy sources (RESs), including solar photovoltaics (PVs), with enabling technologies such as fuel cells (FCs), batteries (BTs), and energy storage systems (ESSs) plays a critical role in improving energy management, reducing emissions, and increasing economic viability. This review highlights advancements in multi-objective optimization techniques, real-time energy management, and sophisticated control strategies that have significantly contributed to reducing fuel consumption, operational costs, and environmental impact. However, key challenges remain, including the scalability of optimization techniques, sensitivity to system parameter variations, and limited incorporation of user behavior, grid dynamics, and life cycle carbon emissions. The review underlines the need for robust, adaptable control strategies capable of accommodating rapidly changing energy environments, as well as the importance of life cycle assessments to ensure the long-term sustainability of RES technologies. Future research directions emphasize the integration of variable RESs, advanced scheduling, and the application of emerging technologies such as artificial intelligence and blockchain to improve system resilience and efficiency. This paper introduces a novel classification framework, distinct from existing taxonomies, addressing gaps in prior reviews by incorporating emerging technologies and focusing on the dynamic nature of energy management in hybrid systems. It also advocates for bridging the gap between theoretical advancements and real-world implementation to promote the development of more sustainable and reliable HESs. Full article

The long-term sustainability of seaports depends on various operational factors, including infrastructure efficiency, digital innovation, environmental management, and regulatory compliance, among which maritime pilotage plays a crucial role in ensuring safe navigation and minimizing environmental, economic, and social risks. This research employed the PRISMA-ScR framework to evaluate the environmental, economic, and social impacts of pilotage on the sustainability of seaports. The findings demonstrate efficient navigation and spill avoidance, which reduce emissions, safeguard marine biodiversity, and maintain water quality. Economically, it reduces delays, optimizes operational expenses, and increases port competitiveness by increasing maritime traffic. Moreover, pilotage improves navigational safety, local professional skill development, and community interactions via ecological conservation and operational efficiency. It also indicates how environmental initiatives benefit the economy, increase port competitiveness, and promote job security and community happiness. The results also emphasize the significance of pilotage in sustainable seaport operations by quantifying pollution reductions, cost savings, and safety. The result also suggests that successful pilotage enhances ports’ viability and responsibility in global shipping networks while addressing environmental, economic, and social concerns. Full article

In addressing the increasing challenges associated with automation, alternative fuels, and regulatory compliance within the maritime industry, the well-being of seafarers has become a critical determinant of workforce stability and career sustainability. This study investigates the impact of shore leave policies on seafarers’ well-being and turnover intention by applying the Analytical Hierarchy Process (AHP). The study delineates four principal criteria—mental well-being, physical health, work–life balance, and organizational support—and evaluates their sub-criteria via expert assessments from two distinct cohorts, each comprising 30 participants: maritime human resource professionals and seafarers working alongside related stakeholders. The outcome designates organizational support as the most influential criterion, with shore leave flexibility and financial incentives identified as the top-ranked sub-criteria. In contrast, mental well-being has the lowest overall weight, indicating that while its significance is acknowledged, it is frequently overshadowed by structural and financial factors. The findings underscore the need for shipping companies and policymakers to formulate flexible and financially supported shore leave policies to bolster seafarer retention and overall job satisfaction. This study enhances literature concerning sustainable seafaring careers and provides strategic recommendations for optimizing the management of shore leave policies within the maritime industry. Full article