The spread of wearable and flexible electronics devices has been accelerating in recent years for a wide range of applications. Development of an appropriate flexible power source to operate these flexible devices is a key challenge. Supercapacitors...
Supercapacitors have gained e wide attention because of high power density, fast charging and discharging, as well as good cycle performance. Recently, expanded graphite (EG) has been widely investigated as an effective electrode material for superca...
A supercapacitor module was used as the energy storage system in a regenerative braking test rig to explore the opportunities and challenges of implementing supercapacitors for regenerative braking in an electric drivetrain. Supercapacitors are consi...
Electrochemical supercapacitors are a promising type of energy storage device with broad application prospects. Developing an accurate model to reflect their actual working characteristics is of great research significance for rational utilization, p...
High energy density storage device exhibiting a reliable lifecycle is needed in the 21st century. Hence, energy storage research is critical for reducing energy consumption. Supercapacitors exhibit such characteristics via interfacial ion electrosorp...
As reliance on sustainable energy grows, the demand for efficient, high-performance energy storage systems becomes increasingly critical, especially in uninterruptible power supplies (UPS), where reliability and fast transitions are essential. Superc...
Due to their highly changeable porosity and adaptable skeletons, covalent organic frameworks (COFs) have been frequently used in supercapacitors. Additionally, COFs are a wonderful match for supercapacitors’ requirements for quick carrier migra...
Classic circuit modeling for supercapacitors is limited in representing the strongly non-linear behavior of the hybrid supercapacitor technology. In this work, two novel modeling techniques suitable to represent the time-domain electrical behavior of...
We present an investigation to develop innovative composite fibrous electrodes optimized for a supercapacitor with a “green” low-cost aqueous electrolyte, superconcentrated potassium formate, which raises the maximum energy storage device...
As the need for energy is constantly increasing and in the long term fossil fuels are not an option because of global overheating due to the greenhouse effect, alternative energy production concepts such as photovoltaics, wind energy, IR energy harve...
In recent years, supercapacitors are attracting great attention as one kind of electrochemical energy storage device, which have a high power density, a high energy density, fast charging and discharging, and a long cycle life. As a solution processi...
As a new type of energy storage device, supercapacitors have the advantages of high-power densities, high safety factors, and low maintenance costs, so they have attracted widespread attention among researchers. However, a major problem with supercap...
Supercapacitors are widely studied for their high energy density, low cost, and exceptional cycling durability. However, the decisive factor in determining the performance of supercapacitors is the electrode material. Among emerging materials, metal...
From the first patent of supercapacitors, the industry has experienced the commercialization of supercapacitors happening rapidly after the year 2000. Within the last 5 years, the electronics industry has gained access to at least four different type...
Supercapacitors are a kind of energy storage device that lie between traditional capacitors and batteries, characterized by high power density, long cycle life, and rapid charging and discharging capabilities. The energy storage mechanism of supercap...
Supercapacitors are energy storage devices with high electrical power densities and long spanlife. Therefore, supercapacitor-based energy storage systems have been employed for a variety of applications. The modelling and simulation of SCs have been...
Among typical energy storage devices, supercapacitors play a predominant role in industry and our life owing to their rapid charge/discharge rate, superior lifespan, high power density, low cost, and outstanding safety. However, their low energy dens...
This work presents a comparative study on the ageing of supercapacitors and a method for monitoring their state of health (SoH) through mechanical deformation. This study aims to evaluate the accelerated ageing behaviours of these systems under speci...
To date, batteries are the most widely used energy storage devices, fulfilling the requirements of different industrial and consumer applications. However, the efficient use of renewable energy sources and the emergence of wearable electronics has cr...
Composite electrolytes for applications in electrochemical energy technology, i.e. in batteries and supercapacitors, are gaining increasing attention. In the absence of a commonly accepted definition a ternary combination of materials, e.g. a polymer...
Composite structural supercapacitors (SSC) are an attractive technology for aerospace vehicles; however, maintaining strength whilst adding energy storage to composite structures has been difficult. Here, SSCs were manufactured using aerospace-grade...
Smart hydrogels with high electrical conductivity, which can be a real source of power while also collecting and storing the diverse sources of energy with ultrahigh stretchability, strong self-healability, low-temperature tolerance, and excellent me...
This paper presents a universal fabrication process for single-layer textile supercapacitors, independent of textile properties such as weave pattern, thickness and material. To achieve this, an engineered copolymer membrane was fabricated within the...
The effective integration of energy storage systems is paramount for the widespread deployment of renewable energy technologies. Selection of a specific storage system is typically dictated by the primary challenge it aims to mitigate, such as interm...
Herein, metal-free heteroatom doped carbon-based materials are being reviewed for supercapacitor and energy applications. Most of these low-cost materials considered are also derived from renewable resources. Various forms of carbon that have been em...
Supercapacitors have shown great potential as a possible solution to the increasing global demand for next-generation energy storage systems. Charge repositioning is based on physical or chemical mechanisms. There are three types of supercapacitors&m...
A successful guaranteed launch of a mainline diesel locomotive is one of the most important and urgent problems of the rolling stock operation. Improvement of the start-up system of the main diesel locomotive when using a supercapacitor allows multip...
Micro-supercapacitors have recently emerged as promising microscale power sources for portable and wearable microelectronics. However, most reported planar micro-supercapacitors suffer from low energy density and the complexity of fabrication, which...
Nowadays, the rapid development and demand of high-performance, lightweight, low cost, portable/wearable electronic devices in electrical vehicles, aerospace, medical systems, etc., strongly motivates researchers towards advanced electrochemical ener...
Energy storage in a one-dimensional format is increasingly vital for the functionality of wearable technologies and is garnering attention from various sectors, such as smart apparel, the Internet of Things, e-vehicles, and robotics. Yarn-based super...
This article presents the qualitative analyses of the construction of supercapacitor samples. The analyses are based on the suggested thermographic measurements as well as the technique of testing the inherent noise of the investigated element. The i...
The very fast evolution in wearable electronics drives the need for energy storage micro-devices, which have to be flexible. Micro-supercapacitors are of high interest because of their high power density, long cycle lifetime and fast charge and disch...
Future wearable electronics and smart textiles face a major challenge in the development of energy storage devices that are high-performing while still being flexible, lightweight, and safe. Fiber supercapacitors are one of the most promising energy...
Supercapacitors are widely used in various fields due to their high power density, fast charging and discharging speeds, and long service life. However, with the increasing demand for flexible electronics, integrated supercapacitors in devices are al...
Carbon materials are very important for the commercial production of supercapacitors and they are crucial electrode materials. The porous carbon prepared with biomass materials as a precursor is of significance due to its sustainability, environmenta...
Among many electrode materials, cobalt-based nanomaterials are widely used in supercapacitors because of their high natural abundance, good electrical conductivity, and high specific capacitance. However, there are still some difficulties to overcome...
Graphene is a unique nanocarbon nanostructure, which has been frequently used to form nanocomposites. Green-synthesized graphene has been focused due to environmentally friendly requirements in recent technological sectors. A very important applicati...
Structural supercapacitors (SSCs) are multifunctional energy storage composites (MESCs) that combine the mechanical properties of fiber-reinforced polymers and the electrochemical performance of supercapacitors to reduce the overall mass in lightweig...
Because of their rapid charging and discharging, high power densities, and excellent cycling life stabilities, supercapacitors have great potential for use in electric vehicles, portable electronics, and for grid frequency modulation. The growing nee...
The application of fractional calculus to obtain dynamic models for supercapacitors represents an alternative approach to obtaining simpler and more accurate models. This paper presents a model for the supercapacitor in the time domain, based on the...
For hybrid electric vehicles, supercapacitors are an attractive technology which, when used in conjunction with the batteries as a hybrid system, could solve the shortcomings of the battery. Supercapacitors would allow hybrid electric vehicles to ach...
A supercapacitor is an energy storage device that has the advantage of rapidly storing and releasing energy compared to traditional batteries. One powerful method for creating a wide range of materials is combustion synthesis, which relies on self-su...
Supercapacitors are a highly promising class of energy storage devices due to their high power density and long life cycle. Conducting polymers (CPs) and organic molecules are potential candidates for improving supercapacitor electrodes due to their...
While State-of-Charge (SOC) estimation for supercapacitors has been extensively studied, most research focuses on single units. However, the recent introduction of reconfigurable circuits significantly alters system dynamics, rendering existing SOC e...
Supercapacitors (SCs) have received much interest due to their enhanced electrochemical performance, superior cycling life, excellent specific power, and fast charging–discharging rate. The energy density of SCs is comparable to batteries; howe...
Lignin, a paper and pulp industry waste product, has attracted significant attention in recent years as a promising sustainable material for high-end energy applications. Herein, we examine lignin as a potential material for ionic thermoelectric hydr...
Two-dimensional transition metal carbides/nitrides (MXenes) are emerging members of the two-dimensional material family, obtained by removing the A layer of the MAX phase through methods such as liquid-phase etching. This article summarizes the struc...
As a novel type of green energy storage device, supercapacitors exhibit several orders of magnitude higher capacities than the traditional dielectric capacitors and significantly higher power density than the traditional secondary batteries. Supercap...
A hybrid supercapacitor is designed by coupling a battery electrode with a capacitive electrode in a single device/cell to enhance energy density. In iodine-based hybrid supercapacitors, the nanoporous carbon serves as the electrode material; however...
Recently, transition metal oxides, such as ruthenium oxide (RuO2), manganese dioxide (MnO2), nickel oxides (NiO) and cobalt oxide (Co3O4), have been widely investigated as electrode materials for pseudo-capacitors. In particular, these metal oxides w...
of 57