Search Results (7)

Mid-high-frequency ultrasound (375 kHz) and anodic oxidation at low current intensity (<50 mA, NaCl as the supporting electrolyte) were employed to treat sulfonamide antibiotics (sulfamethoxazole—SMX and sulfacetamide—SAM). The sonodegradation involved HO•, while electrogenerated HClO was mainly responsible for the antibiotics’ elimination in the electrochemical process. A comparison of the processes evidenced that the degradation of SMX by ultrasound was faster due to its higher hydrophobicity. In contrast, in the electrochemical system, the SAM degradation was more efficient, which was associated with a higher reactivity of its acetamide moiety toward HClO. Interestingly, SMX was selectively sonodegraded in synthetic hospital wastewater and seawater, whereas the matrix components strongly accelerated the electrochemical degradation but affected the process performance in the hospital wastewater. On the other hand, theoretical analyses of atomic charge indicated that the central S-N bond, the N and aromatic ring in the aniline moiety, the C=C bond, and methyl groups in the isoxazole groups on SMX are the most susceptible moieties to the attacks by HO• and HClO. Furthermore, for the typical byproducts, calculations of the probability of being active against bacteria were slightly lower than that of the parent pharmaceutical, even being much lower for the byproducts from the electrochemical treatment. Full article

Objectives: Drug–drug cocrystallization represents a promising approach for the development of novel combination drugs with improved physicochemical and biopharmaceutical properties. The aim of the present research is to prepare novel drug-drug cocrystalline forms of antiepileptic drug carbamazepine (CBZ) with sulfacetamide (SCTM). Methods: The novel CBZ cocrystal methanol solvate and cocrystal hydrate were prepared via solvent evaporation technique and characterized by single crystal X-ray diffraction, differential scanning calorimetry and thermogravimetric analysis. Results: Single-crystal X-ray diffraction and thermal analysis revealed that the multicomponent solids are isostructural, wherein the solvent molecule does not play a structure-forming role. To optimize the synthesis of [CBZ+SCTM+H₂O] (1:1:0.7), the binary and ternary phase diagrams were constructed in acetonitrile at 25 °C. A thorough investigation of the cocrystal hydrate behavior in aqueous solution showed that the pH of the dissolution medium exerted a significant effect on the stability and solubility of [CBZ+SCTM+H₂O] (1:1:0.7). According to the dissolution and diffusion experiments in a buffer solution pH 6.5, the cocrystal hydrate characterized an enhanced dissolution rate and flux of CBZ. Pharmacokinetic studies in rabbits showed that the novel cocrystal hydrate exhibited a comparable bioavailability to the parent CBZ. Conclusions: Overall, this work reports the preparation of a novel CBZ drug-drug cocrystal hydrate, which can be considered as an alternative CBZ solid form for oral usage, possessing additive pharmacological effect. Full article

The development of novel scaffolds that can increase the effectiveness, safety, and convenience of medication therapy using drug conjugates is a promising strategy. As a result, drug conjugates are an active area of research and development in medicinal chemistry. This research demonstrates acetamide–sulfonamide scaffold preparation after conjugation of ibuprofen and flurbiprofen with sulfa drugs, and these scaffolds were then screened for urease inhibition. The newly designed conjugates were confirmed by spectroscopic techniques such as IR, 1HNMR, 13CNMR, and elemental analysis. Ibuprofen conjugated with sulfathiazole, flurbiprofen conjugated with sulfadiazine, and sulfamethoxazole were found to be potent and demonstrated a competitive mode of urease inhibition, with IC50 (µM) values of 9.95 ± 0.14, 16.74 ± 0.23, and 13.39 ± 0.11, respectively, and urease inhibition of 90.6, 84.1, and 86.1% respectively. Ibuprofen conjugated with sulfanilamide, sulfamerazine, and sulfacetamide, whereas flurbiprofen conjugated with sulfamerazine, and sulfacetamide exhibited a mixed mode of urease inhibition. Moreover, through molecular docking experiments, the urease receptor-binding mechanisms of competitive inhibitors were anticipated, and stability analysis through MD simulations showed that these compounds made stable complexes with the respective targets and that no conformational changes occurred during the simulation. The findings demonstrate that conjugates of approved therapeutic molecules may result in the development of novel classes of pharmacological agents for the treatment of various pathological conditions involving the urease enzyme. Full article

The degradation of drugs is a substantial problem since it affects the safety and effectiveness of pharmaceutical products, as well as their influence on the environment. A novel system of three potentiometric cross-sensitive sensors (using the Donnan potential (DP) as an analytical signal) and a reference electrode was developed for the analysis of UV-degraded sulfacetamide drugs. The membranes for DP-sensors were prepared by a casting procedure from a dispersion of perfluorosulfonic acid (PFSA) polymer, containing carbon nanotubes (CNTs), whose surface was preliminarily modified with carboxyl, sulfonic acid, or (3-aminopropyl)trimethoxysilanol groups. A correlation between the sorption and transport properties of the hybrid membranes and cross-sensitivity of the DP-sensor to sulfacetamide, its degradation product, and inorganic ions was revealed. The analysis of the UV-degraded sulfacetamide drugs using the multisensory system based on hybrid membranes with optimized properties did not require a pre-separation of the components. The limits of detection of sulfacetamide, sulfanilamide, and sodium were 1.8 × 10⁻⁷, 5.8 × 10⁻⁷, and 1.8 × 10⁻⁷ M. The relative errors of the determination of the components of the UV-degraded sulfacetamide drugs were 2–3% (at 6–8% relative standard deviation). PFSA/CNT hybrid materials provided the stable work of the sensors for at least one year. Full article

Antibiotics have been used to control the aquatic environment in both therapeutic and prophylactic ways. Antibiotics are particularly difficult to extract due to their strong interactions with biological matrices. In this study, UPLC-MS/MS method was developed and validated for quantitative confirmatory analysis of multi-class antibiotics residues in fish and shrimp. Fourteen antibiotics belonging to sulphonamides, β-lactams, quinolones, sulfones and macrolides were determined within one chromatographic run. The samples were suspended in 0.1 M HCl, and the analytes were extracted into ethyl acetate. The extracts were defatted with cyclohexane. The limits of quantification (LOQ) ranged from 0.24 to 1.32 µg kg⁻¹ for fish and 0.42–1.62 µg kg⁻¹ for shrimp samples. The recoveries ranged from 75 to 105%. The method was applied to the analysis of farmed freshwater Tilapia fish (Oreochromis niloticus) and shrimp (Penaeus monodon) collected in Sri Lanka. Sulfacetamide (4.31 ± 0.70 µg kg⁻¹) and sulfamethoxypyridazine (0.75 ± 0.15 µg kg⁻¹) were detected in the fish, and sulfapyridine (0.21–0.56 µg kg⁻¹) and sulfadoxine (0.35–1.44 µg kg⁻¹) were detected in the shrimp samples. The concentrations complied with the EU regulation limits for veterinary drug residues in seafood and did not pose a risk in terms of food safety. Full article

The degradation of sulfacetamide with the formation of sulfanilamide leads to a deterioration in the quality of pharmaceuticals. In this work, potentiometric sensors for the simultaneous determination of sulfanilamide, sulfacetamide and inorganic ions, and for assessing the degradation of pharmaceuticals were developed. A multisensory approach was used for this purpose. The sensor cross-sensitivity to related analytes was achieved using perfluorosulfonic acid membranes with poly(3,4-ethylenedioxythiophene) or polyaniline as dopants. The composite membranes were prepared by oxidative polymerization and characterized using FTIR and UV-Vis spectroscopy, and SEM. The influence of the preparation procedure and the dopant concentration on the membrane hydrophilicity, ion-exchange capacity, water uptake, and transport properties was investigated. The characteristics of the potentiometric sensors in aqueous solutions containing sulfanilamide, sulfacetamide and alkali metals ions in a wide pH range were established. The introduction of proton-acceptor groups and π-conjugated moieties into the perfluorosulfonic acid membranes increased the sensor sensitivity to organic analytes. The relative errors of sulfacetamide and sulfanilamide determination in the UV-degraded eye drops were 1.2 to 1.4 and 1.7 to 4%, respectively, at relative standard deviation of 6 to 9%. Full article

A variety of novel 5-aryl thiophenes 4a–g containing sulphonylacetamide (sulfacetamide) groups were synthesized in appreciable yields via Pd[0] Suzuki cross coupling reactions. The structures of these newly synthesized compounds were determined using spectral data and elemental analysis. Density functional theory (DFT) studies were performed using the B3LYP/6-31G (d, p) basis set to gain insight into their structural properties. Frontier molecular orbital (FMOs) analysis of all compounds 4a–g was computed at the same level of theory to get an idea about their kinetic stability. The molecular electrostatic potential (MEP) mapping over the entire stabilized geometries of the molecules indicated the reactive sites. First hyperpolarizability analysis (nonlinear optical response) were simulated at the B3LYP/6-31G (d, p) level of theory as well. The compounds were further evaluated for their promising antibacterial and anti-urease activities. In this case, the antibacterial activities were estimated by the agar well diffusion method, whereas the anti-urease activities of these compounds were determined using the indophenol method by quantifying the evolved ammonia produced. The results revealed that all the sulfacetamide derivatives displayed antibacterial activity against Bacillus subtiles, Escherichia coli, Staphylococcus aureus, Shigella dysenteriae, Salmonella typhae, Pseudomonas aeruginosa at various concentrations. Furthermore, the compound 4g N-((5-(4-chlorophenyl)thiophen-2-yl)sulfonyl) acetamide showed excellent urease inhibition with percentage inhibition activity ~46.23 ± 0.11 at 15 µg/mL with IC₅₀ 17.1 µg/mL. Moreover, some other compounds 4a–f also exhibited very good inhibition against urease enzyme. Full article