Search Results (15)

We characterized non-thermal plasma generated in two types of Surface Dielectric Barrier Discharge (SDBD) reactors, one with a planar and the other with a cylindrical electrode. Plasma was examined using the time-resolved imaging and Optical Emission Spectroscopy (OES) methods. We observed that the cylindrical electrode suppresses plasma formation during both discharge modes: positive streamers and pseudo-Trichel microdischarges. The propagation velocity of the plasma front was estimated to be in the range 12–15 m/s, regardless of the discharge mode and electrode type. Spectral analysis showed that the plasma emission spectrum consisted mainly of the first and second positive nitrogen bands. Using Specair software, we calculated the plasma thermodynamic parameters and found that, despite morphological differences, the plasma generated in both reactors had similar thermodynamic properties. Finally, we discussed the temporal evolution of the discharge and attributed the plasma suppression caused by the cylindrical electrode to the characteristic uniformity of the electric field around and along this electrode. Full article

This work reports on observations of positive and negative nanosecond-pulsed discharge in liquid argon. The structures of both positive and negative discharges, their sizes, and the propagation velocities exhibit remarkable similarity. Similar to the streamers in liquid nitrogen and gases, negative streamers require higher applied voltages (electric fields) and propagate to shorter distances. For both polarities, the spectra are almost identical and appear to be a superposition of strongly broadened atomic lines, with preliminary analysis of broadening indicating densities of about 40% that of liquid. Full article

Plasma actuators have been proposed as a tool to produce hydrodynamical effects in the boundary layer of aerodynamical flows. We have analyzed some properties of these systems using suitable plasma diagnostics based on the emissivity characteristics of such plasmas. The direction and the velocity of propagation of the ionizing wave spreading on the dielectric surface were measured (in the 100–200 km/s range), and it was demonstrated that it behaves like a cathode-directed streamer. The averaged electron temperature (4–5 eV) and the reduced field strength (E/N ≈ 6 × 10¹⁹ V·m²) of the ionizing wave switching the discharges on were measured, too. Full article

Estimation of rock properties from seismic data is important for exploration and production activities in the petroleum industry. Considering the compressional velocity—the speed of propagating body waves in formations—and the quality factor (Q)—a measure of the frequency-selective energy losses of waves propagating through formations—both properties are usually estimated from multichannel seismic data. Velocity is estimated during multichannel processing of seismic reflection data in either the time or depth domain. In marine seismic acquisition, Q can be estimated from the following sources: Vertical Seismic Profile (VSP) surveys, where sources are located near the sea surface and geophones are distributed at depth along a borehole; and multichannel reflection data, where sources are also located near the sea surface and receivers are distributed either at the sea surface (conventional seismic survey with streamers) or on the sea floor (use of nodes or Ocean Bottom Cables (OBC)). The aforementioned acquisition devices, VSP, conventional streamers, nodes, and OBCs are much more expensive than single-channel acquisition with one receiver per shot due to the cost of operation. There are numerous old and new datasets from academia and the oil industry that have been acquired with single-channel acquisition devices. However, there is a paucity of work addressing the estimation of velocity and Q from this type of equipment. We investigate the estimation of Q and velocity from single-channel seismic data. Using the windowed discrete Fourier transform for a single seismic trace, we calculate the peak and dominant frequency that changes with time. In the geologic environment, higher frequencies are attenuated at shallow depths (time), while lower frequencies remain at deeper positions. From the rate at which higher frequencies are attenuated with time, we estimate the effective quality factor (Q_eff). However, when using Kirchhoff migration to process single-channel seismic data, events far from the vertical projection of the receiver contribute to the trace at a given time. Then, an underestimation of the effective quality factor occurs. To compensate for the effects of more distant events with lower-frequency content contaminating the shorter events, we propose a linear equation to correct the effective quality factor estimated from migrated seismic data. Effective Q and its correction are estimated in five single-channel seismic lines surveyed along the Joetsu Knoll, a SW-NE anticline structure on the eastern margin of the Sea of Japan. These results are linked to geomorphological and geological features and the velocity field. Joetsu Knoll is a known site of massive gas hydrates (GH), which occur in the first hundred metres of Neogene sediments and, together with gas chimneys, play an important role in seismic wave absorption. Q_eff estimated from migrated seismic data maintains the spatial relationship between high and low Q regions. The region of low Q, which is below 124 and has an average value of 57, occurs near the anticlinal hinge and tends to coincide with the region in which the Bottom Simulating Reflector (BSR) resides. The coexistence of GH and free gas coincides with the very low P velocity gradient of 0.225 s⁻¹. BSR occurrence, Q_eff and the geometry of the Joetsu anticline testify to progressive gas hydrate depletion northward along the dome. Full article

High-voltage direct current (HVDC) links are starting to become widely implemented thanks to their interesting advantages such as reduced operation losses, the absence of reactive power, which allows energy transport via underground cables over long distances, and improved power control. The latter advantage is very essential for renewable energy resource integration into power grids. However, a thorough understanding of the behavior of insulation systems for HVDC components is critical so as to ensure a more reliable service. Indeed, the existence of the direct current (DC) voltage in HVDC components may induce surface and space charge accumulation that can stress insulation further or even promote discharge inception and propagation. As such, this work focuses on showcasing the effect of surface charge on streamers that develop on the interface of liquid–solid insulation due to the advent of lightning impulse (LI) voltage in the HVDC link. This study was performed using finite-element-based numerical simulations that include a quasi-electrostatic model for surface charge accumulation and an electrohydrodynamic fluid model for streamer initiation and propagation. The geometry used was point–plane configuration where the high voltage is applied to the needle electrode located above the liquid–solid interface. The obtained results suggest that streamer initiation is affected by both the accumulated surface charge density and polarity. For a positive streamer, an accumulation of positive surface charge increases the discharge inception voltage as a result of a weakening in the electric field, while an accumulation of negative surface charge decreases the discharge inception voltage due to an intensification in the electric field. Moreover, streamer travel distance and velocity are also both shown to be affected by surface charge accumulation. Full article

Liquid insulation is used in high voltage equipment such as power transformers as both dielectric medium and coolant. Breakdown in liquid insulation tends to be governed either by streamer initiation under more uniform fields, or by streamer propagation under more non-uniform fields. A model streamer propagation study, which screens the effectiveness of additives based on cyclohexane and mixtures with diethylaniline (DEA) and toluene, is presented in this paper. The effect of additives, at different concentrations, on streamer propagation velocity in cyclohexane under an applied lightning impulse voltage of positive polarity is studied. Cyclohexane (ionisation potential 9.88 eV) was chosen because, being a hydrocarbon, it shares similarities with the constituents of common insulating liquids. Previous studies have also shown how, in general, the addition of additives of lower ionization potential than the bulk liquid can slow down streamer propagation in insulating liquids. A point-plane electrode configuration of 70 mm gap with a 5 μm tip radius is used and subjected to an applied positive polarity impulse of 1.2/50 μs. A high velocity imaging system is also used to capture streamer images to validate a Time-To-Breakdown (TTB) measurement approach used in inferring approximate streamer velocity. The DEA (ionisation potential 6.98 eV) was found to be an effective additive to slow down positive polarity streamers in cyclohexane in the applied voltage range (≈220–280 kV peak) in concentrations above approximately 0.33% (by volume). Toluene (ionisation potential 8.82 eV) was found not to significantly slow down streamers in cyclohexane, even at 10% concentration, for the same voltage range. This is postulated to be due to the fact that toluene does not have a low enough ionisation potential (with respect to that of the cyclohexane) to change the streamer branching characteristics sufficiently during propagation. Full article

The flashover along the insulator endangers the reliable operation of the electrical power system. The reasonable curved profiles of the shed could improve the flashover voltage, which would reduce power system outages. The research on the influence of the curved profiles of the shed on the streamer propagation along the insulator made of polymer was presented in the paper. The streamer propagation “stability” field, path, and velocity affected by the curved profiles of the shed, were measured by ultraviolet camera, ICCD camera, and photomultipliers. The “surface” component of the streamer is stopped at the shed with the different curved profiles, while the “air” component could go round the shed and reach the cathode. The streamer propagation “stability” fields are inversely proportional to the curved profiles of the shed. The streamer propagation velocities are proportional to the curved profiles of the shed. The relationship between the streamer propagation and the flashover propagation was discussed in depth. The subsequent flashover propagation is greatly affected by the streamer propagation path and “stability” field. Furthermore, the influence of the material properties on the streamer propagation path was also discussed in depth. Full article

The formation of a nanosecond discharge with the use of a Hamamatsu streak-camera and with simultaneously wideband (10 GHz) measurement of voltage and displacement current caused by a streamer in one pulse has been studied. Nanosecond voltage pulses of various amplitudes (16, 20, and 27 kV) were applied across a point-to-plane gap (8.5 mm) filled with air at various pressures (13, 25, 50, 100, and 200 kPa). It was found that the voltage across the gap drops as soon as a streamer appears in the vicinity of the pointed electrode. At the same time, a pre-breakdown current begins to flow. The magnitude of the pre-breakdown current, as well as the voltage drop, is determined by the rate of formation of dense plasma and, accordingly, by the rate of redistribution of the electric field in the gap. The streamer velocity determines the rise time and amplitude of the current. The higher the streamer velocity, the shorter the rise time and the higher the amplitude of the pre-breakdown current. The propagation of a backward and third ionization waves was observed both with the streak camera and by measuring the displacement current. As they propagate, the discharge current increases to its amplitude value. Full article

Electric streamer discharges (streamers) in the air are a very important stage of lightning, taking place before formation of the leader discharge, and with which an electric discharge starts from conducting objects which enhance the background electric field, such as airplanes. Despite years of research, it is still not well understood what mechanism determines the values of a streamer’s parameters, such as its radius and propagation velocity. The novel Streamer Parameter Model (SPM) was made to explain this mechanism, and to provide a way to efficiently calculate streamer parameters. Previously, we demonstrated that SPM results compared well with a limited set of experimental data. In this article, we compare SPM predictions to the published hydrodynamic simulation (HDS) results. Full article

A pollution flashover along an insulation surface—a catastrophic accident in electrical power system—threatens the safe and reliable operation of a power grid. Silicone rubber coatings are applied to the surfaces of other insulation materials in order to improve the pollution flashover voltage of the insulation structure. It is generally believed that the hydrophobicity of the silicone rubber coating is key to blocking the physical process of pollution flashover, which prevents the formation of continuously wet pollution areas. However, it is unclear whether silicone rubber coating can suppress the generation of pre-discharges such as corona discharge and streamer discharge. In this research, the influence of silicone rubber coating on the characteristics of surface streamer discharge was researched in-depth. The streamer ‘stability’ propagation fields of the polymer are lower than that of the polymer with silicone rubber coating. The velocities of the streamer propagation along the polymer are higher than those along the polymer with silicone rubber coating. This indicates that the surface properties of the polymer with the silicone rubber coating are less favorable for streamer propagation than those of the polymer. Full article

We report on the electrical and optical characterization of the Plasma Coagulation Controller (PCC) device, a low temperature atmospheric plasma source for biomedical applications. This device, designed for the study of plasma-induced blood coagulation, has been developed to operate flexibly in several operational conditions, since it is possible to vary the applied voltage $V_p$ and the pulse repetition rate f in a quite wide range ( $V_p$ range: 2–12 kV, f range: 1–40 kHz). Emission spectroscopy measurements were conducted by varying the line of sight along the axis of helium and neon plasma plumes. The increase of the Reactive Oxygen and Nitrogen Species (RONS) has been observed, as one moves from inside the gas pipe to the outside, as a consequence of the gas mixture with the surrounding air. Furthermore, high-speed photographs of the plasma jet were taken, showing that the plasma is not uniformly distributed in a continuous volumetric region, the plasma being concentrated in localized structures called Pulsed Atmospheric-pressure Plasma Streams (PAPS). The propagation velocities of these objects have been examined, noting that they are not related to the propagation of ion sound waves. Rather, we provide indications that the streamer propagation speed is proportional to the electron drift velocity. Full article

Investigation of positive streamer-leader propagation under slow front impulse voltages can play an important role in the quantitative research of positive upward lightning. In this work, we performed a large-scale investigation into leader development in a 10-m rod–plane gap under a long front positive impulse. To describe the leader propagation under slow front impulse voltages, we recorded the leader propagation with a high-speed charge coupled device (CCD) camera. It is important to figure out this phenomenon to deepen our understanding of leader discharge. The observation results showed that the leader mechanism is a very complex physical phenomenon; it could be categorized into two types of leader process, namely, continuous and the discontinuous leader streamer-leader propagation. Furthermore, we studied the continuous leader development parameters, including two-dimensional (2-D) leader length, injected charge, and final jump stage, as well as leader velocity for rod–plane configuration. We observed that the discontinuous leader makes an important contribution to the appearance of channel re-illuminations of the positive leader. To clarify the above doubts under long front cases, we carried out extensive experiments in this study. The comparative study shows better results in terms of standard switch impulse and long front positive impulse. Finally, the results are presented with a view toward improving our understanding of propagation mechanisms related to restrike phenomena, which are rarely reported. Full article

Nanoparticles currently in use are challenged in further improving the dielectric strength of insulating oil. There is a great need for a new type of nanoparticle to promote the application of insulating oil-based nanofluids in electric industries. This paper experimentally investigates the effect of nanoparticle morphology on pre-breakdown and breakdown properties of insulating oil-based nanofluids. The positive impulse breakdown voltage of insulating oil can be significantly increased by up to 55.5% by the presence of TiO₂ nanorods, up to 1.23 times that of TiO₂ nanospheres. Pre-breakdown streamer propagation characteristics reveal that streamer discharge channels turn into a bush-like shape with much denser and shorter branches in the nanofluid with TiO₂ nanorods. Moreover, the propagation velocity of streamers is dramatically decreased to 34.7% of that in the insulating oil. The greater improvement of nanorods on the breakdown property can be attributed to the lower distortion of the electric field. Thus, when compared with nanospheres, pre-breakdown streamer propagation of nanofluid is much more suppressed with the addition of nanorods, resulting in a greater breakdown voltage. Full article

In order to reveal the effects of nanoparticle materials on prebreakdown and breakdown properties of transformer oil, three types of nanoparticle materials, including conductive Fe₃O₄, semiconductive TiO₂ and insulating Al₂O₃ nanoparticles, were prepared with the same size and surface modification. An experimental study on the breakdown strength and prebreakdown streamer propagation characteristics were investigated for transformer oil and three types of nanofluids under positive lightning impulse voltage. The results indicate that the type of nanoparticle materials has a notable impact on breakdown strength and streamer propagation characteristics of transformer oil. Breakdown voltages of nanofluids are markedly increased by 41.3% and 29.8% respectively by the presence of Fe₃O₄ and TiO₂ nanoparticles. Whereas a slight increase of only 7.4% is observed for Al₂O₃ nanofluid. Moreover, main discharge channels with thicker and denser branches are formed and the streamer propagation velocities are greatly lowered both in Fe₃O₄ and TiO₂ nanofluids, while no obvious change appears in the propagation process of streamers in Al₂O₃ nanofluid in comparison with that in pure oil. The test results of trap characteristics reveal that the densities of shallow traps both in Fe₃O₄ and TiO₂ nanofluids are much higher than that in Al₂O₃ nanofluid and pure oil, greatly reducing the distortion of the electric field. Thus, the propagations of positive streamers in the nanofluids are significantly suppressed by Fe₃O₄ and TiO₂ nanoparticles, leading to the improvements of breakdown strength. Full article

A numerical study has been conducted to understand the mutual effect among nearby needles in a multi-needle electrode dielectric barrier discharge. In the present paper, a fluid-hydrodynamic model is adopted. In this model, the mutual effect among nearby needles in a multi-needle configuration of an atmospheric air dielectric barrier discharge are investigated using a fluid-hydrodynamic model including the continuity equations for electrons and positive and negative ions coupled with Poisson’s equation. The electric fields at the streamer head of the middle needle (MN) and the side needles (SNs) in a three-needle model decreased under the influence of the mutual effects of nearby needles compared with that in the single-needle model. In addition, from the same comparison, the average propagation velocities of the streamers from MN and SNs, the electron average energy profile of MN and SNs (including those in the streamer channel, at the streamer head, and in the unbridged gap), and the electron densities at the streamer head of the MN and SNs also decreased. The results obtained in the current paper agreed well with the experimental and simulation results in the literature. Full article