Search Results (8)

As the need to monitor agriculture parameters intensifies, the development of new sensor nodes for data collection is crucial. These sensor types naturally require power for operation, but conventional battery-based power solutions have certain limitations. This study investigates the potential of harnessing the natural temperature gradient between soil and air to power wireless sensor nodes deployed in environments such as agricultural areas or remote off-grid locations where the use of batteries as a power source is impractical. We evaluated existing devices that exploit similar energy sources and applied the results to develop a state-of-the-art device for extensive testing over a 12-month period. Our main objective was to precisely measure the temperature on a thermoelectric generator (TEG) (a Peltier cell, in particular) and assess the device’s energy yield. The device harvested 7852.2 J of electrical energy during the testing period. The experiment highlights the viability of using environmental temperature differences to power wireless sensor nodes in off-grid and battery-constrained applications. The results indicate significant potential for the device as a sustainable energy solution in agricultural monitoring scenarios. Full article

Drinking water is becoming increasingly scarce as the world’s population grows and climate change continues. However, there is great potential to improve drinking water pipelines, as 30% of fresh water is lost between the supplier and consumer. While systematic process monitoring could play a crucial role in the early detection and repair of leaks, current practice requires manual inspection, which is both time-consuming and costly. This project envisages maintenance-free measurements at numerous locations within the underground infrastructure, a goal that is to be achieved through the use of a harvesting device mounted on the water pipe. This device extracts energy from the temperature difference between the water pipe and the soil using a TEG (thermoelectric generator), takes sensor measurements, processes the data and transmits it wirelessly via LoRaWAN. We built 16 harvesting devices, installed them in four locations and continuously evaluated their performance throughout the project. In this paper, we focus on two devices of a particular type. The data for a full year show that enough energy was available on 94% of the days, on average, to take measurements and transmit data. This study demonstrates that it is possible to power highly constrained sensing devices with energy harvesting in underground environments. Full article

Forest fires have long been a significant global problem. How to reliably accomplish the early warning and real-time monitoring of forest fires has become a pressing issue in order to limit the damage caused by forest fires. A novel technological approach for forest fire monitoring has been made possible by the quick development of wireless sensor network (WSN) technology. Currently, batteries are the primary source of power for WSNs used in forests, but frequent battery replacement will compromise the network for monitoring. As a result, the power supply is the key limit to its application in forest areas. This paper puts forward the thermoelectric conversion based on the Seebeck effect. Its notable feature is to convert heat energy into electric energy through the temperature difference between shallow soil and air. In the process of testing the device, the maximum voltage was 803.36 mV. At the same time, a power management system (PMS) for a thermoelectric conversion device was designed. The main feature of this system is that there is no need for an external control module. In the laboratory test, the minimum input power of this system was 200 mV. When the load resistance was 8 KΩ, the output power was 0.55 mW, and the maximum efficiency could reach 65.38% when the input was 500 mV, which fulfills the requirements of low cost and high reliability, providing a feasible solution for solving the energy limitation problem of WSNs in a forest area. Full article

Energy harvesting is an effective technique for prolonging the lifetime of Internet of Things devices and Wireless Sensor Networks. In applications such as environmental sensing, which demands a deploy-and-forget architecture, energy harvesting is an unavoidable technology. Thermal energy is one of the most widely used sources for energy harvesting. A thermal energy harvester can convert a thermal gradient into electrical energy. Thus, the temperature difference between the soil and air could act as a vital source of energy for an environmental sensing device. In this paper, we present a proof-of-concept design of an environmental sensing node that harvests energy from soil temperature and uses the DASH7 communication protocol for connectivity. We evaluate the soil temperature and air temperature based on the data collected from two locations: one in Belgium and the other in Iceland. Using these datasets, we calculate the amount of energy that is producible from both of these sites. We further design power management and monitoring circuit and use a supercapacitor as the energy storage element, hence making it battery-less. Finally, we deploy the proof-of-concept prototype in the field and evaluate its performance. We demonstrate that the system can harvest, on average, 178.74 mJ and is enough to perform at least 5 DASH7 transmissions and 100 sensing tasks per day. Full article

Energy harvesting has an essential role in the development of reliable devices for environmental wireless sensor networks (EWSN) in the Internet of Things (IoT), without considering the need to replace discharged batteries. Thermoelectric energy is a renewable energy source that can be exploited in order to efficiently charge a battery. The paper presents a simulation of an environment monitoring device powered by a thermoelectric generator (TEG) that harvests energy from the temperature difference between air and soil. The simulation represents a mathematical description of an EWSN, which consists of a sensor model powered by a DC/DC boost converter via a TEG and a load, which simulates data transmission, a control algorithm and data collection. The results section provides a detailed description of the harvested energy parameters and properties and their possibilities for use. The harvested energy allows supplying the load with an average power of 129.04 $\mathsf{\mu }$W and maximum power of 752.27 $\mathsf{\mu }$W. The first part of the results section examines the process of temperature differences and the daily amount of harvested energy. The second part of the results section provides a comprehensive analysis of various settings for the EWSN device’s operational period and sleep consumption. The study investigates the device’s number of operational cycles, quantity of energy used, discharge time, failures and overheads. Full article

Wireless sensor nodes (WSNs) are widely used in the field of environmental detection; however, they face serious power supply problems caused by the complexity of the environmental layout. In this study, a new ultra-low-power hybrid energy harvesting (HEH) system for two types of microenergy collection (photovoltaic (PV) and soil-temperature-difference thermoelectric (TE)) was designed to provide stable power to WSNs. The power supply capabilities of two microenergy sources were assessed by analyzing the electrical characteristics and performing continuous energy data collection. The HEH system consisted of two separated power converters and an electronic multiplexer circuit to avoid impedance mismatch and improve efficiency. The feasibility of the self-powered HEH system was verified by consumption analysis of the HEH system, the WSNs, and the data analysis of the collected microenergy. Taking the summation of PV and TEG input power of 1.26 mW (P_PV:P_TEG was about 3:1) as an example, the power loss of the HEH system accounted for 33.8% of the total input power. Furthermore, the ratio decreased as the value of the input power increased. Full article

To efficiently harvest environmental micro-energy from shallow soil, simulated analysis, theoretical arithmetic and experimental verification are performed to explore the spatiotemporal rules of heat transfer on a soil/finned tube interface. Simulations are carried out for 36 types of different working conditions, and the empirical formulas for temperature and heat flux are obtained. The temperature and heat flux can be calculated using the formulas if the soil temperature, soil moisture content and finned tube initial temperature are known. The simulations also show that the highest heat flux can reach approximately 0.30 mW/mm², and approximately 1507.96 mW of energy can be harvested through the finned tube. Theoretical arithmetic indicates that the heat transfer rate of the copper finned tube is 76.77% higher than that of the bare tube, the highest rate obtained in any study to date. Results also show that the finned tube should be placed where the soil moisture is greater than 30% to get more heat from the soil. A field experiment is carried out in the city of Harbin in Northeast China, where a thermoelectric power generation device has been installed and temperature data have been monitored for a certain time. The results are in good agreement with those obtained from the simulation analysis. The heat transfer processes and heat transfer steady state on the soil/finned tube interface are revealed in this work and are of great importance for the use of geothermal energy. Full article

Thermoelectric generators (TEG) can harvest solar energy during the day using solar flat panels. They can also benefit from the use of a material that stores solar energy to generate additional power at night, when the panel cools down and the energy stored in this material travels back, through the TEG. The soil can be used as the material that stores solar energy, but the performance of such systems, with the heat sink buried in the soil, depends on the ambient and the soil temperature, parameters which can change drastically with the latitude of the location where the TEG is installed. We present an experimental study with the comparison of the potential energy that can be collected from a TEG system with heat sink buried at different depths and at different latitudes: Campinas, Brazil − ${22}^{\circ }$ 54 ${}^{\prime }$ 20 ${}^{″}$ S; and Mataró, Catalonia, Spain − ${41}^{\circ }{32}^{\prime }{17}^{″}$ N. The potential of energy harvesting calculated during 32 winter days in Campinas is 72% of the total calculated during 205 days in Mataró. Experimental results obtained from a complete TEG system showed that in Campinas, during one day, it was possible to store 34.11 J of electrical energy in a supercapacitor. Notably, we demonstrate that the energy generated during the night by the heat stored into the soil can be as high as the energy generated during the day. Full article