Search Results (520)

Mastication is a fundamental rhythmic motor behavior controlled by a brainstem central pattern generator (CPG) located within the pontine and medullary reticular formations. Coordinated activation of jaw-opening and jaw-closing muscles is generated by this network and continuously refined through sensory feedback from periodontal mechanoreceptors and muscle spindles, together with descending inputs from the cortical masticatory area (CMA), basal ganglia, and cerebellum. Thus, mastication is regulated by distributed neural circuits rather than a single central locus. At the cellular level, the rhythmic activity of the masticatory CPG depends on the coordinated action of voltage-gated and ligand-gated ion channels. Recent electrophysiological and computational studies have identified candidate conductances that are proposed to underlie rhythm generation. Persistent sodium currents are proposed to facilitate burst initiation, whereas T-type calcium channels are thought to promote burst activation through post-inhibitory rebound. HCN channels may contribute to rhythmic timing, while calcium-activated potassium channels are thought to participate in burst termination. This review summarizes the hierarchical neural control of mastication and the biophysical mechanisms by which ion channels shape CPG rhythmogenesis. It also discusses the impact of channelopathies and neurodegenerative disorders on masticatory function, highlighting potential ion-channel-targeted therapeutic approaches for temporomandibular disorders, bruxism, and impaired mastication. Full article

(1) Background: Electroplating sludge (ES) and water-washed municipal solid waste incineration fly ash (WFA) are classified as hazardous solid wastes, and their conventional disposal approaches trigger severe heavy metal pollution. Conventional colored ceramic glazes heavily depend on virgin mineral ores and synthetic colorants; therefore, sustainable alternative feedstocks are urgently required. (2) Methods: WFA and ES were compounded with red clay and shale to fabricate low-environmental-risk black glazes. Material microstructures and phase compositions were characterized via X-ray diffraction (XRD) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Single-factor experiments were conducted to optimize the raw material ratios and sintering schedules, while heavy metal leaching toxicity was evaluated following national standard HJ/T 300-2007. (3) Results: The optimal composite formulation consists of 26.1 wt% WFA, 30.4 wt% ES, 26.1 wt% red clay and 17.4 wt% shale. Smooth, defect-free pure black glaze specimens were fabricated after sintering at 1280 °C for 90 min under a weak reducing atmosphere. Heavy metal ions were stably immobilized within the silicate crystalline and amorphous glass phases, with all leaching concentrations well below the national standard thresholds. (4) Conclusions: The proposed technology achieves the high-value co-valorization of two hazardous solid wastes while producing low-environmental-risk colored ceramic glazes, providing a feasible strategy for solid waste recycling and the low-carbon development of the ceramic manufacturing industry. Full article

Silicon suboxide (SiO_x) has been extensively investigated as an anode material for lithium-ion batteries. However, its low electrical conductivity and significant volume expansion during cycling have hindered its practical application. Although compounding SiO_x with carbon can effectively alleviate these issues, practical challenges such as complex preparation processes and high production costs still remain. In this study, porous SiO_x/C anode materials were synthesized in a single step using residue after acid-extraction aluminum from coal fly ash (high silica slag) as the silicon source and calcium carbide as both the reducing agent and carbon source, in a NaCl-CaCl₂ molten salt medium. The intimate interface between SiO_x and carbon not only enhances the electrical conductivity of the electrode but also buffers volume expansion, while the porous structure inside the SiO_x/C particles facilitates rapid ion transport. The SiO_x/C anode fabricated from this material exhibits excellent electrochemical performance and cycling stability: the anode material synthesized at 700 °C for 3 h (denoted as SiO_x/C-700-3) retains a reversible specific capacity of 1093.58 mAh g⁻¹ after 1000 cycles at a current density of 0.4 A g⁻¹. Moreover, the optimized SiO_x/C-700-3 electrode achieves robust long-cycle stability under a high current density of 2 A g⁻¹, sustaining a reversible capacity of 486.22 mAh g⁻¹ after 800 cycles with an average Coulombic efficiency approaching 99.6%. The method proposed in this work provides a new strategy for the preparation of SiO_x/C anode materials and holds great significance for the high-value comprehensive utilization of coal fly ash and the protection of the ecological environment. Full article

Endodontic irrigant solutions act as crucial pretreatment conditioning agents in dentin biomimetic remineralization, preparing the collagen scaffold for calcium phosphate infiltration and subsequent tooth structure reconstruction. In this study, root dentin discs were exposed for 10 min to five irrigant solutions: sodium hypochlorite (NaClO, 3%), EDTA (17%), citric acid (CA, 10%), chlorhexidine (CHX, 2%), and an innovative experimental formulation containing citric acid (7%) and surfactants. Samples were then aged in Hank’s Balanced Salt Solution (HBSS) at 37 °C for three months to simulate long-term clinical conditions. Physicochemical modifications of the collagen and apatite phases were assessed at each experimental stage using ATR-FTIR spectroscopy, with the A_CaP/A_{Amide I} and A₈₇₀/A_CaP absorbance ratios as markers of the degree of mineralization and apatite carbonate content, respectively. Results indicated that CHX- and EDTA-treated dentin exhibited the highest remineralization after ageing, while NaClO impeded remineralization due to collagen degradation. The experimental irrigant produced the most pronounced demineralization, followed by CA; however, it also facilitated significant remineralization, attributed to citrate–collagen binding and surfactant-enhanced apatite nucleation. NaClO selectively degraded collagen and increased apatite crystallinity; CA inhibited apatite nucleation through adsorbed citrate ions, and CHX and EDTA induced minimal alterations. These findings provide molecular-level evidence linking short-term irrigant effects to the long-term potential for dentin biomineralization, with direct implications for irrigant selection in regenerative endodontic protocols. It should be noted that this study was conducted on dentin discs obtained from a single tooth; all findings should therefore be regarded as preliminary and require confirmation in studies with larger, biologically independent sample sizes. Full article

Saline–alkaline aquaculture is a promising strategy to alleviate freshwater shortages; however, such environments severely impair fish growth and physiological homeostasis. Nutritional regulation has been proposed to improve stress tolerance, yet the benefits of single additives are often limited under the multifactorial challenges imposed by saline–alkaline conditions. Therefore, a compound feed additive (CFA) consisting of glutamate, cholesterol, β-glucan, myo-inositol, zinc methionine, and curcumin was developed and evaluated in Nile tilapia (Oreochromis niloticus). To assess the robustness and practical applicability of this nutritional strategy, three independent feeding trials were conducted using different commercial basal diets as validation systems. Within each dietary system, fish were reared under freshwater (FW), saline–alkaline water (SAW), or saline–alkaline water supplemented with CFA (SAW+CFA). Saline–alkaline stress significantly reduced WG and SR, increased FCR, and elevated VSI and HSI, indicating impaired growth performance and metabolic burden. These changes were accompanied by increased serum glucose and ion concentrations (Na⁺, K⁺, Cl⁻), elevated ammonia levels, and reduced crude protein content. Dietary CFA improved growth and feed utilization under saline–alkaline conditions. It enhanced hepatic glycogen content and reduced serum glucose levels. Meanwhile, it downregulated glycolysis-related genes (hk, pfk1, pk) and upregulated genes involved in gluconeogenesis and the pentose phosphate pathway (g6pase, pc, g6pdh), indicating altered glucose metabolism and improved energy homeostasis. Saline–alkaline stress induced oxidative stress, apoptosis, and histological damage in the liver, whereas CFA alleviated these alterations by reducing MDA levels, enhancing antioxidant enzyme activities (CAT, GSH-Px, T-SOD) and suppressing apoptosis-related genes (caspases, p53, c-myc). In addition, CFA alleviated saline–alkaline stress-induced gill structural damage and reduced serum ion concentrations while modulating ion transport-related gene expression, suggesting improved osmoregulatory capacity. It also enhanced ammonia metabolism and transport, as reflected by reduced serum ammonia levels and altered expression of related genes. Furthermore, Saline–alkaline stress impaired intestinal structure and function, whereas CFA improved intestinal villus structure, increased digestive enzyme activities (amylase, trypsin, lipase), and suppressed pro-inflammatory genes (il-1β, il-8). Importantly, similar beneficial response patterns were observed across the three independently analyzed dietary systems. Overall, CFA improved saline–alkaline adaptability of Nile tilapia and was associated with improvements in energy metabolism, oxidative homeostasis, osmoregulation, ammonia detoxification, and intestinal function, providing a practical nutritional strategy for saline–alkaline aquaculture. Full article

In this study, Prunus dulcis hull (PDH) has been used to develop a cost-effective and eco-friendly adsorbent material for the removal of Pb²⁺ ions from polluted waters. The PDH particles were characterized using various techniques, including ATR-FTIR spectroscopy, ion-selective electrode ISE-H⁺ potentiometric titrations, pH of point of zero charge (pH_pzc) analysis, thermogravimetric analysis (TGA), and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). Single-batch adsorption experiments were conducted at different pH values, with pH 5.0 identified as the optimal initial pH in terms of Pb²⁺ adsorption performance of PDH. The study also evaluated the effects of temperature, ionic medium, and several organic ligands with different functional groups on the adsorption capacity of PDH. The results showed that PDH is an effective adsorbent for lead ions, with adsorption capacities (q_m) ranging from 43 to 101 mg g⁻¹ and an adsorption equilibrium time of approximately 750 min at room temperature. Additionally, column adsorption experiments demonstrated that PDH can be reused at least four times with minimal loss in performance. The adsorption behavior of PDH was comparable under both equilibrium (batch) and non-equilibrium (column) conditions, with the breakthrough time (BT_0.5) values significantly affected by the background salts present in the toxic metal ion solution. Full article

A recently developed high-strength nickel-based corrosion-resistant alloy has attracted increasing interest for drilling and production operations in unconventional oil and gas fields. Owing to its high resistance to media containing H₂S, CO₂ and chloride ions, together with its ultra-high strength and favorable strength–toughness balance, this alloy is suitable for demanding service conditions. During hot working, dynamic recrystallization (DRX) governs deformation softening, grain refinement and the subsequent microstructural state, and thus has a direct influence on final properties. In this work, isothermal compression experiments were conducted on this ultra-high-strength nickel-based corrosion-resistant alloy using a Gleeble thermal simulator at 1000–1150 °C and strain rates of 0.01–10 s⁻¹. Electron backscatter diffraction (EBSD) was used to quantify grain size, grain-boundary misorientation, kernel average misorientation (KAM) and the DRX volume fraction. The results indicate that higher deformation temperature generally accelerates DRX, lowers the KAM value and increases the recrystallized-grain fraction. Under a constant deformation temperature, the DRX volume fraction changes non-monotonically with strain rate, showing an initial increase followed by a decrease. Based on the EBSD-derived DRX fractions, linear and quadratic single-parameter models using the Zener–Hollomon parameter were examined first, but neither provided satisfactory fitting accuracy. A two-variable empirical model was therefore formulated for a fixed true strain of ε = 0.92 by considering deformation temperature and strain rate separately. The predicted values agree well with the experimental data, giving R² = 0.91278 and an average relative error of 8.53%. The proposed model captures the main variation tendency of the DRX volume fraction within the studied processing window and provides a useful basis for microstructure control and hot-working parameter design for ultra-high-strength nickel-based corrosion-resistant alloys. Full article

To evaluate the effects of saline water on the yield and quality of tomatoes, a late fruit-setting stage irrigation experiment was conducted in a greenhouse using two cultivars: medium-fruited, tasty Strawberry tomato (fresh-eating) and large-fruited Maofen tomato (fresh/processing). For this, plants were grown in pots containing substrate, and five irrigation water electrical conductivity (EC) levels (1.0 as control, 2.6, 4.2, 5.8, and 7.4 dS m⁻¹) were applied for each cultivar, resulting in a 2 × 5 factorial design with 10 treatments in total. Then, tomato growth, fruit ion composition, and quality attributes were evaluated. The results showed that 1.0–7.4 dS m⁻¹ saline water had no significant impact on the plant height, stem diameter, single-fruit weight, or total yield of either cultivar. However, Strawberry tomato’s marketable yield decreased by 23.5% at 7.4 dS m⁻¹. The yield per plant of Maofen tomato was 2.7 times that of Strawberry tomato. Fruit Na⁺ content increased with EC for both cultivars; Maofen tomato had higher Na⁺ and a lower K⁺/Na⁺ ratio, with greater ion content responses to salinity. Regression analysis revealed distinctly nonlinear responses in key yield, ion, and quality parameters across the salinity gradient. The fruit comprehensive quality score (CQS) rose with EC, and Strawberry tomato’s average CQS increase (109%) was significantly higher than Maofen tomato’s. In conclusion, saline irrigation initiated when the fourth-cluster fruits attained 60% of the final harvested diameter, at EC ≤ 5.8 dS m⁻¹ for Strawberry tomato and ≤7.4 dS m⁻¹ for Maofen tomato, improved fruit quality without compromising yield. Strawberry tomato is recommended for quality-oriented production, whereas Maofen tomato is better suited for yield-oriented production, providing scientific support for saline water utilization in greenhouse soil-less cultivation. Full article

Single-crystal diamond (SCD) is an ideal substrate material for semiconductor devices due to its extremely wide bandgap and exceptionally high thermal conductivity. However, diamond’s extreme hardness and chemical inertness pose challenges for the fabrication of ultra-smooth surfaces. Traditional polishing processes are not only inefficient but also prone to introducing subsurface defects, which severely degrade device performance. To address the above issues, this study proposes a hybrid polishing process combining reactive ion etching (RIE) surface modification with chemical mechanical polishing (CMP), which enables low-loss atomic-level processing of SCD. The study found that RIE treatment induces lattice disorder on the diamond surface, forming a sp²-hybridized amorphous carbon-modified layer. Compared to the sp³ structure of native diamond, this modified layer has lower hardness and is easier to remove. We conducted the verification of the optimized process using high-quality single-crystalline diamond (SCD) samples with an initial surface roughness Ra of 0.68 nm. Under the optimized RIE parameters (substrate bias power: 200 W, etching time: 600 s, gas flow ratio of Ar:O₂:CF₄ = 40:50:10), the surface roughness Ra was reduced to as low as 0.35 nm after 2 h of CMP treatment. Furthermore, systematic characterization of the SCD’s as-received surface, RIE-modified surface, and CMP-treated surface was performed using Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), elucidating the “etching modification–mechanical removal” polishing mechanism. Full article

Electrospun sulfonated polyketone (PK) nanofiber membranes were prepared to investigate the sulfonation-time-dependent structure–property relationships of hydrocarbon-based polymer electrolyte membranes for PEMFC (Polymer Electrolyte Membrane Fuel Cell) applications. NaCl addition to the electrospinning solution increased solution conductivity and enabled the formation of uniform PK nanofibers with an average diameter of approximately 270 nm. Subsequent sulfonation introduced sulfonic-acid-related groups into the PK nanofiber framework, and the resulting membrane properties were strongly governed by sulfonation time. Among the tested membranes, PK-NC16 exhibited the highest proton conductivity of 0.107 ± 0.031 S cm⁻¹ and an ion exchange capacity of 2.82 m_eq g⁻¹, exceeding or comparable to those of Nafion 115 under the tested conditions. FTIR-based analysis indicated that the relative sulfonation index increased up to 16 h, whereas extended sulfonation for 24 h generated additional sulfone/sulfonate-related bands, suggesting possible side reactions or structural changes under prolonged acid treatment. The high water uptake of PK-NC16 enhanced proton transport but also revealed a hydration-sensitive polymer network, as reflected by a voltage degradation rate of approximately −590 μV h⁻¹ during a 100 h short-term stability constant-current test. These results demonstrate that sulfonation time is a key parameter controlling the balance among ionic functionality, hydration, mechanical response, proton conductivity, and PEMFC-relevant single-cell performance in electrospun PK nanofiber membranes. Full article

Background/Objectives: Titanium alloy Ti₆Al₄V remains the gold standard in dental implantology due to its excellent mechanical properties, corrosion resistance, and biocompatibility. However, implant-associated infections and insufficient osseointegration continue to represent major clinical challenges, mainly related to bacterial biofilm formation and suboptimal surface–tissue interactions. Biofilm formation refers to the adhesion, accumulation, and growth of microbial communities embedded within a self-produced extracellular polymeric matrix on implant surfaces, which contributes to bacterial persistence and resistance to host defense mechanisms. This review aims to critically evaluate recent advances in multifunctional bioceramic coatings for dental implants, with a particular focus on zirconia (ZrO₂)-based systems and their antibacterial mechanisms. Methods: A structured literature analysis was conducted using major scientific databases including PubMed, Scopus, and Web of Science, focusing mainly on studies published between 2015 and 2025 related to CaP, Ag, and ZrO₂-based coatings for dental implants. The review examines their physicochemical properties, antibacterial strategies, ion release behavior, and biological responses, including osteogenic activity and biofilm inhibition. Particular attention is given to hybrid systems integrating multiple functional phases. Results: CaP coatings exhibit excellent osteoconductivity and promote early osseointegration but show limited intrinsic antibacterial activity. Ag-based coatings provide strong broad-spectrum antimicrobial effects through controlled Ag⁺ ion release, although concerns regarding cytotoxicity and dose-dependent responses remain. ZrO₂ coatings significantly enhance corrosion resistance and surface stability, while their antibacterial performance can be improved through nanostructuring, laser surface modification, and ionic doping. Hybrid Ag–CaP–ZrO₂ coatings demonstrate improved antibacterial activity, enhanced corrosion resistance, and better regulation of ion release kinetics and osteogenic response compared with single-component coating systems. Conclusions: Multifunctional bioceramic coatings represent a promising strategy for improving the performance of dental implants and addressing the dual challenge of infection control and tissue integration. However, challenges remain regarding long-term stability, controlled ion release, and limited clinical validation. Future research should focus on the development of smart, stimuli-responsive coatings and standardized evaluation protocols to facilitate clinical translation. Full article

This review examines recent advances in multifunctional probes that integrate optical and electrochemical channels for in vitro/in vivo studies. Integration of electrodes with optical fibers provides a powerful platform for localized light delivery and simultaneous electrochemical detection of cellular metabolites both within and at the surface of single living cells. These hybrid devices bridge optical stimulation methods, including optogenetics, and electrochemical monitoring of the cellular response within the same experimental preparation. The review systematically categorizes distinct probe architectures: optical nanoendoscopes for intracellular measurements, probes with a shared opto-electrochemical channel, devices where optical and electrochemical channels are physically separated, and probes engineered for neural interfaces and scanning probe microscopy. For each category, fabrication approaches, surface modification strategies, and representative biological applications are discussed. Particular attention is given to the fundamental tension between optical transparency and electrical conductivity in shared-channel designs, to the mechanical requirements imposed by neural tissue on implantable probes, and to the spatial resolution limits of current scanning probe platforms. The review concludes with a critical assessment of current limitations and future directions, including higher spatial resolution, simultaneous multiplexed analyte detection and broader translation of these technologies toward in vivo experimental models. Full article

The extreme thermal loads encountered in fourth-generation synchrotron radiation sources and X-ray free-electron lasers (XFEL) impose stringent requirements on X-ray optical components. Conventional materials such as beryllium and silicon increasingly exhibit limitations under high-energy conditions, including insufficient thermal conductivity, limited radiation stability, and significant absorption losses, rendering them inadequate for next-generation high-energy X-ray optics. In this context, single-crystal diamond, with its high thermal conductivity, low absorption coefficient, and excellent mechanical strength and radiation resistance, has emerged as a promising candidate for high-energy X-ray refractive optics. This review systematically summarizes recent advances in the fabrication and performance optimization of diamond X-ray refractive lenses for high-energy applications. Starting from the evolving demands of modern synchrotron radiation facilities and XFEL, the fundamental requirements for materials and structural design in high-energy X-ray optics are analyzed. Through comparisons with representative materials, the advantages of diamond in thermal management and transmission performance are highlighted. Major micro- and nanofabrication techniques, including femtosecond laser processing, focused ion beam milling, and plasma etching, are comprehensively reviewed, with emphasis on their respective characteristics in terms of processing efficiency, precision control, and damage introduction. The emerging trend of hybrid fabrication strategies is also discussed. Furthermore, the effects of surface roughness, subsurface damage, and crystal defects on wavefront quality and focusing performance are examined, along with corresponding post-processing and surface correction methods. Finally, current challenges related to large-size single-crystal growth, high-precision low-damage fabrication, and long-term operational stability are discussed, and future development directions for diamond-based X-ray refractive optical components are outlined. Full article

Background: Sensorineural hearing loss (SNHL) is increasingly recognized as a disorder involving not only hair-cell damage but also selective degeneration of spiral ganglion neurons (SGNs). Recent single-cell, molecular, and functional studies have refined the classical type I/type II classification of SGNs by identifying distinct Ia, Ib, and Ic subtypes within type I neurons. This review aims to synthesize current evidence on how SGN vulnerability is shaped by the interaction between subtype identity, life stage, and injury context. Methods: We conducted a critical narrative review of recent studies on SGN heterogeneity and subtype-specific vulnerability across development, maturity, and aging, with particular attention to molecular profiling, functional studies, and emerging therapeutic strategies. Results: SGN degeneration in SNHL is not uniform. During development, the available evidence mainly supports the vulnerability of subtype specification, synaptogenesis, and activity-dependent maturation, rather than direct selective degeneration of mature Ia/Ib/Ic identities. In the mature cochlea, subtype-specific differences in synaptic architecture, ion-channel composition, and metabolic demand appear to shape responses to noise, ototoxic drugs, and ischemic stress, with Ic-related populations often showing greater vulnerability. During aging, cumulative mitochondrial dysfunction, oxidative stress, chronic inflammation, and declining neurotrophic support may progressively unmask differences in subtype resilience and contribute to age-related auditory decline. Conclusions: A lifespan-oriented and subtype-informed framework may improve the current understanding of selective SGN degeneration and support the development of more precise neuroprotective and reparative strategies for SNHL. Full article

Aiming at the problem that the degradation mechanism of lithium-ion batteries is complex during aging and that a single feature is difficult to fully characterize the battery state of health (SOH), this paper proposes an SOH prediction method for lithium-ion batteries based on multidimensional HF weighted fusion. First, health features (HF) are extracted from the battery charge–discharge data, and the Pearson correlation coefficient is used to analyze the correlation between each HF and SOH. Based on this, a weighted fused feature matrix is constructed. Then, through the collaborative modeling of a convolutional neural network (CNN) and a bidirectional long short-term memory (BiLSTM), the joint extraction of local features and temporal features from multidimensional HF is realized. Meanwhile, manta ray foraging optimization (MRFO) is introduced to optimize key hyperparameters. Finally, experiments are conducted based on the CALCE dataset, and the prediction performance of the proposed method is evaluated through comparisons with different prediction models and an ablation experiment on HF fusion strategies. The results show that the proposed method achieves good prediction results on the CS2-35, CS2-36, and CS2-37 test batteries, with the lowest MAE of 1.134% and the highest R² of 0.963. Full article