Search Results (6)

Transportation agencies often rely on manual surveys to monitor seat belt compliance; however, these methods are limited by surveyor fatigue, reduced visibility due to tinted windows or low lighting, and restricted geographic coverage, making manual surveys prone to errors and unrepresentative of the broader driving population. This paper presents an automated seat belt detection system leveraging the YOLO11 neural network on video footage captured by a tethered uncrewed aerial vehicle (UAV). The objectives are to (1) develop a robust system for detecting seat belt use at stop-controlled intersections, (2) evaluate factors affecting detection accuracy, and (3) demonstrate the potential of UAV-based compliance monitoring. The model was tested in real-world scenarios at a single-lane and a complex multi-lane stop-controlled intersection in Iowa. Three studies examined key factors influencing detection accuracy: (i) seat belt–shirt color contrast, (ii) sunlight direction, and (iii) vehicle type. System performance was compared against manual video review and large language model (LLM)-assisted analysis, with assessments focused on accuracy, resource requirements, and computational efficiency. The model achieved a mean average precision (mAP) of 0.902, maintained high accuracy across the three studies, and outperformed manual methods in reliability and efficiency while offering a scalable, cost-effective alternative to LLM-based solutions. Full article

This research explores the design of a system for monitoring driver drowsiness and supervising seat belt usage in interprovincial buses. In Peru, road accidents involving long-distance bus transportation amounted to 5449 in 2022, and the human factor plays a significant role. It is essential to understand how the use of non-invasive sensors for monitoring and supervising passengers and drivers can enhance safety in interprovincial transportation. The objective of this research is to develop a system using a Raspberry Pi 4 and Arduino Nano that allows for the storage of monitoring data. To achieve this, a conventional camera and MediaPipe were used for driver drowsiness detection, while passenger supervision was carried out using a combination of commercially available sensors as well as custom-built sensors. RS485 communication was utilized to store data related to both the driver and passengers. The simulations conducted demonstrate a high level of reliability in detecting driver drowsiness under specific conditions and the correct operation of the sensors for passenger supervision. Therefore, the proposed system is feasible and can be implemented for real-world testing. The implications of this research suggest that the system’s cost is not a barrier to its implementation, thus contributing to improved safety in interprovincial transportation. Full article

Safety is the eternal theme of power systems. In view of problems such as time-consuming and poor real-time performance in the correct use of seat belt hooks by manual supervision operators in the process of power operation, this paper proposes an improved YOLOv7 seat belt hook suspension state recognition algorithm. Firstly, the feature extraction part of the YOLOv7 backbone network is improved, and the M-Spatial Pyramid Pooling Concurrent Spatial Pyramid Convolution (M-SPPCSPC) feature extraction module is constructed to replace the Spatial Pyramid Pooling Concurrent Spatial Pyramid Convolution (SPPCSPC) module of the backbone network, which reduces the amount of computation and improves the detection speed of the backbone network while keeping the sensory field of the backbone network unchanged. Second, a decoupled head, which realizes the confidence and regression frames separately, is introduced to alleviate the negative impact of the conflict between the classification and regression tasks, consequently improving the network detection accuracy and accelerating the network convergence. Ultimately, a dynamic non-monotonic focusing mechanism is introduced in the output layer, and the Wise Intersection over Union (WioU) loss function is used to reduce the competitiveness of high-quality anchor frames while reducing the harmful gradient generated by low-quality anchor frames, which ultimately improves the overall performance of the detection network. The experimental results show that the mean Average Precision (mAP@0.5) value of the improved network reaches 81.2%, which is 7.4% higher than that of the original YOLOv7, therefore achieving better detection results for multiple-state recognition of hooks. Full article

Using a safety belt is crucial for preventing severe injuries and fatalities during vehicle accidents. In this paper, we propose a real-time vehicle occupant safety belt detection system based on the YOLOv7 (You Only Look Once version seven) object detection algorithm. The proposed approach aims to automatically detect whether the occupants of a vehicle have buckled their safety belts or not as soon as they are detected within the vehicle. A dataset for this purpose was collected and annotated for validation and testing. By leveraging the efficiency and accuracy of YOLOv7, we achieve near-instantaneous analysis of video streams, making our system suitable for deployment in various surveillance and automotive safety applications. This paper outlines a comprehensive methodology for training the YOLOv7 model using the labelImg tool to annotate the dataset with images showing vehicle occupants. It also discusses the challenges of detecting seat belts and evaluates the system’s performance on a real-world dataset. The evaluation focuses on distinguishing the status of a safety belt between two classes: “buckled” and “unbuckled”. The results demonstrate a high level of accuracy, with a mean average precision (mAP) of 99.6% and an F1 score of 98%, indicating the system’s effectiveness in identifying the safety belt status. Full article

One of the key functions of driver monitoring systems is the evaluation of the driver’s state, which is a key factor in improving driving safety. Currently, such systems heavily rely on the technology of deep learning, that in turn requires corresponding high-quality datasets to achieve the required level of accuracy. In this paper, we introduce a dataset that includes information about the driver’s state synchronized with the vehicle telemetry data. The dataset contains more than 17.56 million entries obtained from 633 drivers with the following data: the driver drowsiness and distraction states, smartphone-measured vehicle speed and acceleration, data from magnetometer and gyroscope sensors, g-force, lighting level, and smartphone battery level. The proposed dataset can be used for analyzing driver behavior and detecting aggressive driving styles, which can help to reduce accidents and increase safety on the roads. In addition, we applied the K-means clustering algorithm based on the 11 least-correlated features to label the data. The elbow method showed that the optimal number of clusters could be either two or three clusters. We chose to proceed with the three clusters to label the data into three main scenarios: parking and starting driving, driving in the city, and driving on highways. The result of the clustering was then analyzed to see what the most frequent critical actions inside the cabin in each scenario were. According to our analysis, an unfastened seat belt was the most frequent critical case in driving in the city scenario, while drowsiness was more frequent when driving on the highway. Full article

Signalized intersections are common hotspots for rear-end crashes, causing severe injuries and property damage. Despite recent attempts to determine the contributing causes to injury severity in this crash type, the frequency of severe rear-end crashes is still significant. Therefore, exploring commonly omitted potential risk factors is essential to proper detection of contributing factors to these crashes and planning appropriate countermeasures. This research incorporated the examination of intersection crash data in Wyoming to examine injury severity risk factors in this crash type. The study examined a set of potential roadway, driver, crash, and environmental risk factors, including pavement surface friction, which is a commonly omitted factor in relevant studies. A random-parameters ordinal probit model was developed for the analysis. The findings demonstrated that two crash attributes (motorcycle involvement and improper seat belt use), three driver’s attributes (driver’s condition, age, and gender), and two environmental and roadway characteristics (road condition and pavement friction) impacted the injury severity of rear-end crashes at signalized intersections. Full article