Search Results (75)

The evolution of 3GPP non-terrestrial networks (NTNs) is enabling new avenues for broadband connectivity via satellite, especially within the scope of 5G. The parallel rise in satellite mega-constellations has further fueled efforts toward ubiquitous global Internet access. This convergence has fostered collaboration between mobile network operators and satellite providers, allowing the former to leverage mature space infrastructure and the latter to integrate with terrestrial mobile standards. However, integrating these technologies presents significant architectural challenges. This study investigates 5G NTN architectures using satellite mega-constellations, focusing on transparent architectures where Starlink is employed to relay the backhaul, midhaul, and new radio (NR) links. The performance of these architectures is assessed through a testbed utilizing OpenAirInterface (OAI) and Open5GS, which collects key user-experience metrics such as round-trip time (RTT) and jitter when pinging the User Plane Function (UPF) in the 5G core (5GC). Results show that backhaul and midhaul relays maintain delays of 50–60 ms, while NR relays incur delays exceeding one second due to traffic overload introduced by the RFSimulator tool, which is indispensable to transmit the NR signal over Starlink. These findings suggest that while transparent architectures provide valuable insights and utility, regenerative architectures are essential for addressing current time issues and fully realizing the capabilities of space-based broadband services. Full article

Accurate and scalable indoor localization is a key enabler of intelligent automation in smart environments and industrial systems. In this paper, we present SelfLoc, a self-supervised indoor localization system that combines IEEE 802.11az Round Trip Time (RTT) and Received Signal Strength Indicator (RSSI) data to achieve fine-grained positioning using commodity Wi-Fi infrastructure. Unlike conventional methods that depend heavily on labeled data, SelfLoc adopts a contrastive learning framework to extract spatially discriminative and temporally consistent representations from unlabeled wireless measurements. The system integrates a dual-contrastive strategy: temporal contrasting captures sequential signal dynamics essential for tracking mobile agents, while contextual contrasting promotes spatial separability by ensuring that signal representations from distinct locations remain well-differentiated, even under similar signal conditions or environmental symmetry. To this end, we design signal-specific augmentation techniques for the physical properties of RTT and RSSI, enabling the model to generalize across environments. SelfLoc also adapts effectively to new deployment scenarios with minimal labeled data, making it suitable for dynamic and collaborative industrial applications. We validate the effectiveness of SelfLoc through experiments conducted in two realistic indoor testbeds using commercial Android devices and seven Wi-Fi access points. The results demonstrate that SelfLoc achieves high localization precision, with a median error of only 0.55 m, and surpasses state-of-the-art baselines by at least 63.3% with limited supervision. These findings affirm the potential of SelfLoc to support spatial intelligence and collaborative automation, aligning with the goals of Industry 4.0 and Society 5.0, where seamless human–machine interactions and intelligent infrastructure are key enablers of next-generation smart environments. Full article

There are workloads that do not need the total data ordering enforced by the Transmission Control Protocol (TCP). For example, Virtual Network Computing (VNC) has a sequence of pixel-based updates in which the order of rectangles can be relaxed. However, VNC runs over the TCP and can have higher latency due to unnecessary blocking to ensure total ordering. By using Quick UDP Internet Connections (QUIC) as the underlying protocol, we are able to implement a partial order delivery approach, which can be combined with Forward Error Correction (FEC) to reduce data latency. Our earlier work on consistency fences provides a mechanism and semantic foundation for partial ordering. Our new evaluation on the Emulab testbed, with two different synthetic workloads for streaming and non-streaming updates, shows that our partial order and FEC strategy can reduce the blocking time and inter-delivery time of rectangles compared to total delivery. For one workload, partially ordered data with FEC can reduce the 99-percentile message-blocking time to 0.4 ms versus 230 ms with totally ordered data. That workload was with 0.5% packet loss, 100 ms Round-Trip Time (RTT), and 100 Mbps bandwidth. We study the impact of varying the packet-loss rate, RTT, bandwidth, and CCA and demonstrate that partial order and FEC latency improvements grow as we increase packet loss and RTT, especially with the emerging Bottleneck Bandwidth and Round-Trip propagation time (BBR) congestion control algorithm. Full article

We propose a modeling approach for position estimation based on the observed radio propagation in an environment. The approach is purely similarity-based and therefore free of explicit physical assumptions. What distinguishes it from classical related methods are probabilistic position estimates. Instead of just providing a point estimate for a given signal sequence, our model returns the distribution of possible positions as continuous probability density function, which allows for appropriate integration into recursive state estimation systems. The estimation procedure starts by using a kernel to compare incoming data with reference recordings from known positions. Based on the obtained similarities, weights are assigned to the reference positions. An arbitrarily chosen density estimation method is then applied given this assignment. Thus, a continuous representation of the distribution of possible positions in the environment is provided. We apply the solution in a Particle Filter (PF) system for smartphone-based indoor localization. The approach is tested both with radio signal strength (RSS) measurements (Wi-Fi and Bluetooth Low Energy RSSI) and round-trip time (RTT) measurements, given by Wi-Fi Fine Timing Measurement. Compared to distance-based models, which are dedicated to the specific physical properties of each measurement type, our similarity-based model achieved overall higher accuracy at tracking pedestrians under realistic conditions. Since it does not explicitly consider the physics of radio propagation, the proposed model has also been shown to work flexibly with either RSS or RTT observations. Full article

Networked microgrids (NMG) are gaining popularity as an example of smart grids (SG), where power networks are integrated with communication technologies. Communication technologies enable NMGs to be monitored and controlled via communication networks. However, ensuring that communication networks in NMGs satisfy quality of delivery (QoD) metrics such as the round trip time (RTT) of NMG control data is necessary. This paper addresses the communication network types and communication technologies used in NMGs. We present various NMG deployments to demonstrate real-life applicability in different contexts. We develop a real-time NMG testbed using real hardware, such as Cisco 4331 Integrated Services Routers (ISR). We evaluate QoD in NMG control data by measuring RTT under varying relative network congestion levels. The results reveal that high-variance background traffic leads to greater RTTs, surpassing the industrial communication response time requirement specified by the European Telecommunications Standards Institute (ETSI) by over 25 times. Full article

The rapid development of wireless network technology and the continuous evolution of network service demands have raised higher requirements for congestion control algorithms. In 2016, Google proposed the Bottleneck Bandwidth and Round-trip propagation time (BBR) congestion control algorithm based on the Transmission Control Protocol (TCP) protocol. While BBR offers lower latency and higher throughput compared to traditional congestion control algorithms, it still faces challenges. These include the periodic triggering of the ProbeRTT phase, which impairs data transmission efficiency, data over-injection caused by the congestion window (CWND) value-setting policy, and the difficulty of coordinating resource allocation across multiple concurrent flows. These limitations make BBR less effective in multi-stream competition scenarios in high-speed wireless networks. This paper analyzes the design limitations of the BBR algorithm from a theoretical perspective and proposes the Adaptive-BBR (Ad-BBR) algorithm. The Ad-BBR algorithm incorporates real-time RTT and link queue-state information, introduces a new RTprop determination mechanism, and implements a finer-grained, RTT-based adaptive transmission rate adjustment mechanism to reduce data over-injection and improve RTT fairness. Additionally, the ProbeRTT phase-triggering mechanism is updated to ensure more stable and smoother data transmission. In the NS3, 5G, and Wi-Fi simulation experiments, Ad-BBR outperformed all comparison algorithms by effectively mitigating data over-injection and minimizing unnecessary entries into the ProbeRTT phase. Compared to the BBRv1 algorithm, Ad-BBR achieved a 17% increase in throughput and a 30% improvement in RTT fairness, along with a 13% reduction in the retransmission rate and an approximate 20% decrease in latency. Full article

A core problem relating to indoor positioning is a lack of prior knowledge of the environment. To date, most WiFi–RTT research assumes knowledge of the access points in an indoor environment. This paper provides a solution to this problem by using a simultaneous localisation and mapping (SLAM) algorithm, using WiFi–RTT and pedestrian dead reckoning, which uses the inertial sensors in a smartphone. A WiFi–RTT SLAM algorithm has only been researched in one instance at the time of writing; this paper aims to expand the exploration of this problem, particularly in relation to the use of outlier detection and motion models. For the trials, which were 35 steps long, the final mobile device horizontal positioning error was 1.01 m and 1.7 m for the forward and reverse trials, respectively. The results of this paper show that unmapped indoor positioning using WiFi–RTT is feasible for metre-level indoor positioning, given correct access point calibration. Full article

High-precision indoor positioning is essential for various applications, such as the Internet of Things, robotics, and smart manufacturing, requiring accuracy better than 1 m. Conventional indoor positioning methods, like Wi-Fi or Bluetooth fingerprinting, typically provide low accuracy within a range of several meters, while techniques such as laser or visual odometry often require fusion with absolute positioning methods. Ultra-wideband (UWB) and Wi-Fi Round-Trip Time (RTT) are emerging radio positioning technologies supported by industry leaders like Apple and Google, respectively, both capable of achieving high-precision indoor positioning. This paper offers a comprehensive survey of UWB and Wi-Fi positioning, beginning with an overview of UWB and Wi-Fi RTT ranging, followed by an explanation of the fundamental principles of UWB and Wi-Fi RTT-based geometric positioning. Additionally, it compares the strengths and limitations of UWB and Wi-Fi RTT technologies and reviews advanced studies that address practical challenges in UWB and Wi-Fi RTT positioning, such as accuracy, reliability, continuity, and base station coordinate calibration issues. These challenges are primarily addressed through a multi-sensor fusion approach that integrates relative and absolute positioning. Finally, this paper highlights future directions for the development of UWB- and Wi-Fi RTT-based indoor positioning technologies. Full article

The 5th Generation Mobile Communication (5G) plays a significant role in the Fourth Industrial Revolution (4IR), facilitating significant improvements and innovations in various fields. The 3rd Generation Partnership Project (3GPP) is currently standardizing the Authentication and Key Management for Application (AKMA) system for the 5G convergence applications (5G cAPPs). The Transport Layer Security (TLS) is recommended as the application-specific Ua* protocol between User Equipment (UE) and Application Function (AF) to securely transmit the AKMA identifiers of UE as well as guarantee traffic protection. Among TLS protocols, session resumption in TLS 1.2 and the Pre-Shared Key (PSK) modes of TLS 1.3 are particularly desirable for Ua*. Unfortunately, the integration of PSK options of TLS 1.3, namely PSK-only, PSK-(EC)DHE, and 0-RTT (0 Round-Trip Time) modes, with AKMA has not yet been thoroughly investigated; hence, security, performance, compatibility, and effectiveness remain uncertain. In response, this paper explores the integration of the TLS 1.3 PSK options with AKMA and investigates the said metrics by conducting formal security verification and emulating exemplary applications. According to the formal verification and experimental results, the PSK-(EC)DH mode shows a security strength trade-off with efficiency. On the one hand, the 0-RTT mode demonstrates better efficiency but exhibits drawbacks on forward secrecy and replay attacks. The result suggests that 0-RTT mode has to be approved to ensure seamless integration of the TLS 1.3 PSK option with AKMA. In addition, adjustment on the AKMA architecture is also imperative to enhance security level. Full article

“Smart” devices, such as contemporary smartphones and PDAs (Personal Digital Assistance), play a significant role in our daily live, be it for navigation or location-based services (LBSs). In this paper, the use of Ultra-Wide Band (UWB) and Wireless Fidelity (Wi-Fi) based on RTT (Round-Trip Time) measurements is investigated for pedestrian user localization. For this purpose, several scenarios are designed either using real observation or simulated data. In addition, the localization of user groups within a neighborhood based on collaborative navigation (CP) is investigated and analyzed. An analysis of the performance of these techniques for ranging the positioning estimation using different fusion algorithms is assessed. The methodology applied for CP leverages the hybrid nature of the range measurements obtained by UWB and Wi-Fi RTT systems. The proposed approach stands out due to its originality in two main aspects: (1) it focuses on developing and evaluating suitable models for correcting range errors in RF-based TWR (Two-Way Ranging) technologies, and (2) it emphasizes the development of a robust CP engine for groups of pedestrians. The results obtained demonstrate that a performance improvement with respect to position trueness for UWB and Wi-Fi RTT cases of the order of 74% and 54%, respectively, is achieved due to the integration of these techniques. The proposed localization algorithm based on a P2I/P2P (Peer-to-Infrastructure/Peer-to-Peer) configuration provides a potential improvement in position trueness up to 10% for continuous anchor availability, i.e., UWB known nodes or Wi-Fi access points (APs). Its full potential is evident for short-duration events of complete anchor loss (P2P-only), where an improvement of up to 53% in position trueness is achieved. Overall, the performance metrics estimated based on the extensive evaluation campaigns demonstrate the effectiveness of the proposed methodologies. Full article

User location has emerged as a pivotal factor in human-centered environments, driving applications like tracking, navigation, healthcare, and emergency response that align with Sustainable Development Goals (SDGs). However, accurate indoor localization remains challenging due to the limitations of GPS in indoor settings, where signal interference and reflections disrupt satellite connections. While Received Signal Strength Indicator (RSSI) methods are commonly employed, they are affected by environmental noise, multipath fading, and signal interference. Round-Trip Time (RTT)-based localization techniques provide a more resilient alternative but are not universally supported across access points due to infrastructure limitations. To address these challenges, we introduce DistilLoc: a cross-knowledge distillation framework that transfers knowledge from an RTT-based teacher model to an RSSI-based student model. By applying a teacher–student architecture, where the RTT model (teacher) trains the RSSI model (student), DistilLoc enhances RSSI-based localization with the accuracy and robustness of RTT without requiring RTT data during deployment. At the core of DistilLoc, the FNet architecture is employed for its computational efficiency and capacity to capture complex relationships among RSSI signals from multiple access points. This enables the student model to learn a robust mapping from RSSI measurements to precise location estimates, reducing computational demands while improving scalability. Evaluation in two cluttered indoor environments of varying sizes using Android devices and Google WiFi access points, DistilLoc achieved sub-meter localization accuracy, with median errors of 0.42 m and 0.32 m, respectively, demonstrating improvements of 267% over conventional RSSI methods and 496% over multilateration-based approaches. These results validate DistilLoc as a scalable, accurate solution for indoor localization, enabling intelligent, resource-efficient urban environments that contribute to SDG 9 (Industry, Innovation, and Infrastructure) and SDG 11 (Sustainable Cities and Communities). Full article

Wireless networks, especially 5G and WiFi networks, have made great strides in increasing network bandwidth and coverage over the past decades. However, the mobility and channel conditions inherent to wireless networks have the potential to impair the performance of traditional Transmission Control Protocol (TCP) congestion control algorithms (CCAs). Google proposed a novel TCP CCA based on Bottleneck Bandwidth and Round-Trip propagation time (BBR), which is capable of achieving high transmission rates and low latency through the estimation of the available bottleneck capacity. Nevertheless, some studies have revealed that BBR exhibits deficiencies in fairness among flows with disparate Round-Trip Times (RTTs) and also displays inter-protocol unfairness. In high-speed wireless networks, ensuring fairness is of paramount importance to guarantee equitable bandwidth allocation among diverse traffic types and to enhance overall network utilization. To address this issue, this paper proposes a BBR–Pacing Gain (BBR–PG) algorithm. By deriving the pacing rate control model, the impact of pacing gain on BBR fairness is revealed. Adjusting the pacing gain according to the RTT can improve BBR’s performance. Simulations and real network experiments have shown that the BBR–PG algorithm retains the throughput advantages of the original BBR algorithm while significantly enhancing fairness. In our simulation experiments, RTT fairness and intra-protocol fairness were improved by 50% and 46%, respectively. Full article

With the increasing level of industrial informatization, massive industrial data require real-time and high-fidelity wireless transmission. Although some industrial wireless network protocols have been designed over the last few decades, most of them have limited coverage and narrow bandwidth. They cannot always ensure the certainty of information transmission, making it especially difficult to meet the requirements of low latency in industrial manufacturing fields. The 5G technology is characterized by a high transmission rate and low latency; therefore, it has good prospects in industrial applications. To apply 5G technology to factory environments with low latency requirements for data transmission, in this study, we analyze the statistical performance of the round-trip time (RTT) in a 5G-R15 communication system. The results indicate that the average value of 5G RTT is about 11 ms, which is less than the 25 ms of WIA-FA. We then consider 5G RTT data as a group of time series, utilizing the augmented Dickey–Fuller (ADF) test method to analyze the stability of the RTT data. We conclude that the RTT data are non-stationary. Therefore, firstly, the original 5G RTT series are subjected to first-order differencing to obtain differential sequences with stronger stationarity. Then, a time series analysis-based variational mode decomposition–long short-term memory (VMD-LSTM) method is proposed to separately predict each differential sequence. Finally, the predicted results are subjected to inverse difference to obtain the predicted value of 5G RTT, and a predictive error of 4.481% indicates that the method performs better than LSTM and other methods. The prediction results could be used to evaluate network performance based on business requirements, reduce the impact of instruction packet loss, and improve the robustness of control algorithms. The proposed early warning accuracy metrics for control issues can also be used to indicate when to retrain the model and to indicate the setting of the control cycle. The field of industrial control, especially in the manufacturing industry, which requires low latency, will benefit from this analysis. It should be noted that the above analysis and prediction methods are also applicable to the R16 and R17 versions. Full article

The rapid expansion of Internet-of-Things (IoT) applications necessitates a thorough understanding of network configurations to address unique challenges across various use cases. This paper presents an in-depth analysis of three IoT network topologies: linear chain, structured tree, and dynamic transition networks, each designed to meet the specific requirements of industrial automation, home automation, and environmental monitoring. Key performance metrics, including round-trip time (RTT), server processing time (SPT), and power consumption, are evaluated through both simulation and hardware experiments. Additionally, this study introduces an enhanced UDP protocol featuring an acknowledgment mechanism and a power consumption evaluation, aiming to improve data transmission reliability over the standard UDP protocol. Packet loss is specifically measured in hardware experiments to compare the performance of standard and enhanced UDP protocols. The findings show that the enhanced UDP significantly reduces packet loss compared to the standard UDP, enhancing data delivery reliability across dynamic and structured networks, though it comes at the cost of slightly higher power consumption due to additional processing. For network topology performance, the linear chain topology provides stable processing but higher RTT, making it suitable for applications such as tunnel monitoring; the structured tree topology offers low energy consumption and fast communication, ideal for home automation; and the dynamic transition network, suited for industrial Automated Guided Vehicles (AGVs), encounters challenges with adaptive routing. These insights guide the optimization of communication protocols and network configurations for more efficient and reliable IoT deployments. Full article

Wi-Fi round-trip time (RTT) ranging has proven successful in indoor localization. Here, it is shown to be useful outdoors as well—and more accurate than smartphone code-based GNSS when used near buildings with Wi-Fi access points (APs). A Bayesian grid with observation and transition models is used to update a probability distribution of the position of the user equipment (UE). The expected value (or the mode) of this probability distribution provides an estimate of the UE location. Localization of the UE using RTT ranging depends on knowing the locations of the Wi-Fi APs. Determining these positions from floor plans can be time-consuming, particularly when the APs may not be accessible (as is often the case in order to prevent unauthorized access to the network). An alternative is to invert the Bayesian grid method for locating the UE—which uses distance measurements from the UE to several APs with known position. In the inverted method we instead locate the AP using distance measurements from several known positions of the UE. In localization using RTT, at any given time, a decision has to be made as to which APs to range to, given that there is a cost associated with each “range probe” and that some APs may not respond. This can be problematic when the APs are not uniformly distributed. Without a suitable ranging strategy, one can enter a dead-end state where there is no response from any of the APs currently being ranged to. This is a particular concern when there are local clusters of APs that may “capture” the attention of the RTT app. To avoid this, a strategy is developed here that takes into account distance, signal strength, time since last “seen”, and the distribution of the directions to APs from the UE—plus a random contribution. We demonstrate the method in a situation where there are no line-of-sight (LOS) connections and where the APs are inaccessible. The localization accuracy achieved exceeds that of the smartphone code-based GNSS. Full article