Search Results (10)

Traditional farming practices are becoming increasingly inadequate to meet global food demand due to water scarcity, prolonged production cycles, climate variability, and declining arable land. In contrast, aeroponic, smart, soil-free farming technologies offer a more sustainable alternative by reducing land use and providing efficient water use, given that aeroponics intermittently delivers water in mist form rather than maintaining continuous root zone moisture. However, aeroponics faces critical challenges in irrigation management due to non-standardized structures and limited real-time control. A key limitation is the inability to dynamically respond to temperature (T), relative humidity (RH), light intensity (L_i), electrical conductivity (EC), pH, and photosynthesis rate (P_n), resulting in suboptimal crop yields and resource wastage. Despite growing interest, there remains a research gap in integrating internet of things (IoT) and machine learning technologies into aeroponic systems for adaptive control. IoT-enabled sensors provide real-time data on ambient conditions and plant health, while ML models can adaptively optimize misting intervals based on the fluctuations in P_n and environmental inputs. These technologies are particularly well suited to address the dynamic, data-intensive nature of aeroponic environments. This review purposes a novel, standardized IoT–ML framework to control irrigation by emphasizing IoT sensing and ML-based decision making in aeroponics. This integrated approach is essential for minimizing water loss, enhancing resource efficiency, and advancing the sustainability of controlled-environment agriculture. Full article

In an integrated gasification combined cycle (IGCC), a gasification process produces a gas stream from a solid fuel, such as coal or biomass. This gas (syngas or synthesis gas) resulting from the gasification process contains carbon monoxide, molecular hydrogen, and carbon dioxide (other gaseous components may also be present depending on the gasified solid fuel and the gasifying agent). Separating hydrogen from this syngas stream has advantages. One of the methods to separate hydrogen from syngas is selective permeation through a palladium-based metal membrane. This separation process is complicated as it depends nonlinearly on various variables. Thus, it is desirable to develop a simplified reduced-order model (ROM) that can rapidly estimate the separation performance under various operational conditions, as a preliminary stage of computer-aided engineering (CAE) in chemical processes and sustainable industrial operations. To fill this gap, we present here a proposed reduced-order model (ROM) procedure for a one-dimensional steady plug-flow reactor (PFR) and use it to investigate the performance of a membrane reactor (MR), for hydrogen separation from syngas that may be produced in an integrated gasification combined cycle (IGCC). In the proposed model, syngas (a feed stream) enters the membrane reactor from one side into a retentate zone, while nitrogen (a sweep stream) enters the membrane reactor from the opposite side into a neighbor permeate zone. The two zones are separated by permeable palladium membrane surfaces that are selectively permeable to hydrogen. After analyzing the hydrogen permeation profile in a base case (300 °C uniform temperature, 40 atm absolute retentate pressure, and 20 atm absolute permeate pressure), the temperature of the module, the retentate-side pressure, and the permeate-side pressure are varied individually and their influence on the permeation performance is investigated. In all the simulation cases, fixed targets of 95% hydrogen recovery and 40% mole-fraction of hydrogen at the permeate exit are demanded. The module length is allowed to change in order to satisfy these targets. Other dependent permeation-performance variables that are investigated include the logarithmic mean pressure-square-root difference, the hydrogen apparent permeance, and the efficiency factor of the hydrogen permeation. The contributions of our study are linked to the fields of membrane applications, hydrogen production, gasification, analytical modeling, and numerical analysis. In addition to the proposed reduced-order model for hydrogen separation, we present various linear and nonlinear regression models derived from the obtained results. This work gives general insights into hydrogen permeation via palladium membranes in a hydrogen membrane reactor (MR). For example, the temperature is the most effective factor to improve the permeation performance. Increasing the absolute retentate pressure from the base value of 40 atm to 120 atm results in a proportional gain in the permeated hydrogen mass flux, with about 0.05 kg/m².h gained per 1 atm increase in the retentate pressure, while decreasing the absolute permeate pressure from the base value of 20 bar to 0.2 bar causes the hydrogen mass flux to increase exponentially from 1.15 kg/m².h. to 5.11 kg/m².h. This study is linked with the United Nations Sustainable Development Goal (SDG) numbers 7, 9, 11, and 13. Full article

Cassava is a crucial food and economic crop in tropical regions globally. In response to challenges in fertilizer use efficiency for cassava cultivation, which is traditionally compromised by extensive leaching and broad root zone distribution, a novel large-particle slow-release fertilizer (LPF) was developed in this study. This fertilizer was synthesized through solution polymerization using non-metallic minerals and seaweed extract. Compared to conventional SFs that release 99% of nutrients within 1 min, the LPF prolonged the release duration to 51 min under optimal synthesis conditions: drying temperature of 80 °C, total extrusion force of 40 t, drying air pressure of −0.40 bar, auxiliary mineral proportion of 50%, and water content of 15%. Microbeam characterization (e.g., FTIR) and kinetic modeling revealed that the superior performance of LPF resulted from mineral crystal enrichment in the outer layer of fertilizer granules, facilitating intra-particle diffusion processes and imposing boundary layer limitations on nutrient release (e.g., N, P, and K). Field experiments validated the slow-release performance of the fertilizer. Notably, soil treated with LPF exhibited superior nutrient retention in the topsoil layer (0–20 cm) both horizontally and vertically. Even with two-thirds of the nutrient content relative to conventional fertilizers, LPF also displayed significant improvements in crop yield, partial factor productivity, and agronomic efficiency by 33.56%, 200.01%, and 513.84%, respectively. These results indicate that LPF presents a promising solution for sustainable cassava cultivation. Full article

Considering the uncertainty of rainfall and prolonged droughts in semiarid regions, optimizing water management through techniques like partial root-zone drying (PRD) is crucial for sustainable banana production. This study aimed to evaluate the ‘Prata-Anã Gorutuba’ banana under irrigation by PRD. The experimental design was randomized blocks with five irrigation strategies (PRD7 50%–50% ETc and 7-day frequency of alternation of the irrigated side—FA, PRD14 50%–50% ETc and 14-day FA, PRD21 50%–50% ETc and 21-day FA, FX 50%–50% ETc and fixed irrigation, and irrigation with 100% ETc on both sides of the plant—FULL) with five replicates. Soil water content, physiological, vegetative, yield characteristics, and water productivity were assessed over two production cycles. PRD on the dry side lowered soil water content below optimal levels for banana cultivation, increased transpiration, and decreased photosynthesis and instantaneous water use efficiency with rising temperatures, while photosynthesis increased with stomatal conductance. PRD reduced plant vigor and delayed flowering in the first cycle. Compared to full and fixed irrigation, PRD conserves water while maintaining crop yields. Water productivity was higher under PRD, with PRD14 (50% ETc and 14-day alternation) offering the best water use efficiency while maintaining yield, making it suitable for ‘Prata-Anã Gorutuba’ banana cultivation. The study recommends PRD for sustainable banana farming in regions with limited water resources, contributing to sustainable agricultural practices and better water management. Full article

In order to ensure sustainability in the agricultural sector and to meet global food needs, a particularly important challenge for our time is to investigate the possibility of increasing agricultural production in areas with extreme hyper-arid environments. Warming air temperatures and sandy soils significantly influence tree root water uptake (RWU) dynamics, making accurate estimation of RWU depth distribution and magnitude crucial for effective resource management, particularly in the context of precision irrigation within agroecosystems. This study employed two non-invasive techniques, namely HYDRUS 1D and electrical resistivity tomography (ERT), to simulate RWU under controlled experimental conditions and under an extreme hyper-arid environment. The results revealed that the highest RWU rates occurred during the morning (08:00–11:00). RWU activity predominantly concentrated in the upper soil profile (0–30 cm), and the soil water content in this area was notably lower compared to the deeper soil layers. With increasing temperature, there was a tendency for the RWU zone to shift to lower depths within the soil profile. The findings of this study could have important implications for farmers, providing valuable insights to implement irrigation water management strategies. Full article

Salinity is a major stress factor that compromises vegetable production in semi-arid climates such as the Mediterranean. The accumulation of salts in the soil can be attributed to limited water availability, which can be exacerbated by changes in rainfall patterns and rising temperatures. These factors can alter soil moisture levels and evaporation rates, ultimately leading to an increase in soil salinity, and, concomitantly, the extent to which crop yield is affected by salinity stress is considered cultivar-dependent. In contrast to tomato hybrids, tomato landraces often exhibit greater genetic diversity and resilience to environmental stresses, constituting valuable resources for breeding programs seeking to introduce new tolerance mechanisms. Therefore, in the present study, we investigated the effects of mild salinity stress on the growth, yield, and nutritional status of sixteen Mediterranean tomato landraces of all size types that had been pre-selected as salinity tolerant in previous screening trials. The experiment was carried out in the greenhouse facilities of the Laboratory of Vegetable Production at the Agricultural University of Athens. To induce salinity stress, plants were grown hydroponically and irrigated with a nutrient solution containing NaCl at a concentration that could maintain the NaCl level in the root zone at 30 mM, while the non-salt-treated plants were irrigated with a nutrient solution containing 0.5 mM NaCl. Various plant growth parameters, including dry matter content and fruit yield (measured by the number and weight of fruits per plant), were evaluated to assess the impact of salinity stress. In addition, the nutritional status of the plants was assessed by determining the concentrations of macro- and micronutrients in the leaves, roots, and fruit of the plants. The key results of this study reveal that cherry-type tomato landraces exhibit the highest tolerance to salinity stress, as the landraces ‘Cherry-INRAE (1)’, ‘Cherry-INRAE (3)’, and ‘Cherry-INRAE (4)’ did not experience a decrease in yield when exposed to salinity stress. However, larger landraces such as ‘de Ramellet’ also exhibit mechanisms conferring tolerance to salinity, as their yield was not compromised by the stress applied. The identified tolerant and resistant varieties could potentially be used in breeding programs to develop new varieties and hybrids that are better adapted to salinity-affected environments. The identification and utilization of tomato varieties that are adapted to salinity stress is an important strategy for promoting agriculture sustainability, particularly in semi-arid regions where salinity stress is a major challenge. Full article

As the greenhouse cultivation industry considers new ways to reduce energy demand and increase sustainable production, the global energy crisis constitutes a major issue. In this paper, two different energy sources for heating and cooling the root zone area of baby leafy vegetables grown in hydroponic tanks by resistors and chillers, respectively, were compared in order to fully cover power demand. The energy needs in the first case were met by the public electricity grid, while in the second case, the energy needs were covered by a photovoltaic system. The greenhouse was equipped with photovoltaic panels, an inverter, a charge controller and a storage system. The target-value of the root zone temperature was 22 °C. Data on solar radiation, root zone temperature, air temperature and humidity from the indoor and outdoor space of the greenhouse were recorded, and the energy production and carbon footprint for different seasons of the year were evaluated along with the crop yield. The results showed that the energy provided by solar panels was able to cover 58.0%, 83.3% and 9.6% of the energy for heating or cooling the root zone area during the spring, summer and winter periods, respectively. Regarding the carbon footprint of the energy used between the two systems, the system with the PV had a substantially lower value, which was calculated at 1.6 kg CO₂-eq kg⁻¹, compared to 49.9 kg CO₂-eq kg⁻¹ for the system with PPG for the whole year. Full article

Greenhouse production of baby leaf vegetables grown in hydroponic floating trays has become extremely popular in recent years. Rocket (Eruca sativa Mill.) can grow in temperatures varying between 10 and 20 °C; nevertheless, a root-zone temperature (RZT) range of 18–23 °C is considered optimal for high productivity, photosynthesis, and production of metabolites. Maintaining such temperatures in winter raises production costs and prevents sustainability. In this study, we tested the impact of lower RZT on plants’ status and recorded their responses while providing energy for heating using photovoltaic solar panels. We used three hydroponic tanks for cultivation; a non-heated (control) tank (12 °C) and two heated tanks; a solar panel-powered one (16 °C) and a public grid-powered one (22 °C). Methylation-sensitive amplified polymorphisms (MSAP) analysis of global methylation profiles and chlorophyll fluorescence analysis were employed to assess methylation and physiology levels of rocket leaves. We found that there is demethylation at 16 °C RZT in comparison to 22 °C RZT. Reduction of temperature at 12 °C did not reduce methylation levels further but rather increased them. Furthermore, at 16 °C, the effective quantum yield of photosystem II (PSII) photochemistry (ΦPSII) was significantly higher, with a higher PSII electron transport rate (ETR) and a significantly decreased non-regulated energy loss (ΦΝO), suggesting a better light energy use by rocket plants with higher photosynthetic performance. ΦPSII was significantly negatively correlated with DNA methylation levels. Our results show that at 16 °C RZT, where plants grow efficiently without being affected by the cold, DNA methylation and photosynthesis apparatus systems are altered. These findings corroborate previous results where hydroponic production of rocket at RZT of 16 °C is accompanied by sufficient yield showing that rocket can effectively grow in suboptimal yet sustainable root-zone temperatures. Full article

In this study, we compared the chemical-physical, antibacterial, and cytotoxicity properties of silico-aluminous and silicate materials for outdoor (green roof, planted walls) and indoor (urban farms, indoor microgreen gardens) cultivation purpose in a context of sustainable construction. Glasses and lightweight aggregates were tailored starting from waste, by-product, and post-consumer and bioproducts (packaging glass cullet, cattle bone flour ash, vegetable biomass ash, spent coffee ground, degreased from biomass of prepupae of Black Soldier Flies) mixed together with a national ferruginous red clay, quarry scrap pumice and, if necessary, with K₂CO₃ of reagent grade. The first type of material was obtained by melting at 1200 °C and the second one by powder sintering at 1000 °C. All specimens, subjected to antibacterial test, showed both low zone of inhibitions towards two Gram-negative and two Gram-positive bacterial strains. A cytotoxicity test on mouse embryonic fibroblast NIH-3T3 cell line directly exposed to the investigated materials was performed at three different exposure times (1 h, 3 h, and 6 h). Data acquired highlighted that the materials positively affected redox mitochondrial activity of the fibroblast cells. The concentrations of leachate heavy metals detected on selected materials in water at room temperature after 24 h were lower than the European law limit and an interesting release of P, K, and N nutrients was noted for those formulations designed for agronomic purposes. pH, falling on average within the 6.5–7.5 range, is optimal for most crops, and the specific conductivity <2 dS/m indicates no depression danger for crops. Both bulk density <1200 kg/m³ and porosity over 50% seem to ensure good performance of lightening, drainage, water reservation, and oxygenation of the roots. Full article

Crop management and soil properties affect greenhouse gas (GHG) emissions from cropping systems. Irrigation is one of the agronomical management practices that deeply affects soil nitrous oxide (N₂O) emissions. Careful management of irrigation, also concerning to soil type, might mitigate the emissions of this powerful GHG from agricultural soils. In the Mediterranean area, despite the relevance of the agricultural sector to the overall economy and sustainable development, the topic of N₂O emissions does not have the same importance as N₂O fluxes in temperate agricultural areas. Only some research has discussed N₂O emissions from Mediterranean cropping systems. Therefore, in this study, N₂O emissions from different soil types (sandy-loam and clay soils) were analyzed in relation to the irrigation of a maize crop grown in two contrasting seasons (2009–2010). The irrigation was done using a center pivot irrigation system about twice a week. The N₂O emissions were monitored throughout the two-years of maize crop growth. The emissions were measured with the accumulation technique using eight static chambers (four chambers per site). Nitrogen fertilizer was applied in the form of ammonium sulphate and urea with 3,4 dimethylpyrazole phosphate (DMPP) nitrification inhibitors. In 2009, the N₂O emissions and crop biomass measured in both soil types were lower than those measured in 2010. This situation was a lower amount of water and nitrogen (N) available to the crop. In 2010, the N₂O fluxes were higher in the clay site than those in the sandy-loam site after the first fertilization, whereas an opposite trend was found after the second fertilization. The soil temperature, N content, and soil humidity were the main drivers for N₂O emission during 2009, whereas during 2010, only the N content and soil humidity affected the nitrous oxide emissions. The research has demonstrated that crop water management deeply affects soil N₂O emissions, acting differently for denitrification and nitrification. The soil properties affect N₂O emission by influencing the microclimate conditions in the root zone, conditioning the N₂O production. Full article