Search Results (49)

Multi-level coded modulation (MLCM) enhances data transmission by allocating error correction more effectively to bits with higher error probabilities, thus optimizing redundancy and improving performance. Despite MLCM’s advantages over traditional bit-interleaved coded modulation (BICM) systems in certain scenarios, its integration with hybrid automatic repeat request (HARQ) systems remains underexplored. HARQ, which combines the benefits of forward error correction (FEC) and automatic repeat request (ARQ), significantly increases resilience to interference and fading, enhancing overall system reliability. This paper bridges the gap by integrating HARQ techniques into the MLCM framework, which was specifically adapted to the layered nature of MLCM. We present tailored hybrid retransmission strategies for each layer of MLCM, demonstrating substantial gains in retransmission efficiency and overall transmission performance. Full article

The rapid development of wireless network technology and the continuous evolution of network service demands have raised higher requirements for congestion control algorithms. In 2016, Google proposed the Bottleneck Bandwidth and Round-trip propagation time (BBR) congestion control algorithm based on the Transmission Control Protocol (TCP) protocol. While BBR offers lower latency and higher throughput compared to traditional congestion control algorithms, it still faces challenges. These include the periodic triggering of the ProbeRTT phase, which impairs data transmission efficiency, data over-injection caused by the congestion window (CWND) value-setting policy, and the difficulty of coordinating resource allocation across multiple concurrent flows. These limitations make BBR less effective in multi-stream competition scenarios in high-speed wireless networks. This paper analyzes the design limitations of the BBR algorithm from a theoretical perspective and proposes the Adaptive-BBR (Ad-BBR) algorithm. The Ad-BBR algorithm incorporates real-time RTT and link queue-state information, introduces a new RTprop determination mechanism, and implements a finer-grained, RTT-based adaptive transmission rate adjustment mechanism to reduce data over-injection and improve RTT fairness. Additionally, the ProbeRTT phase-triggering mechanism is updated to ensure more stable and smoother data transmission. In the NS3, 5G, and Wi-Fi simulation experiments, Ad-BBR outperformed all comparison algorithms by effectively mitigating data over-injection and minimizing unnecessary entries into the ProbeRTT phase. Compared to the BBRv1 algorithm, Ad-BBR achieved a 17% increase in throughput and a 30% improvement in RTT fairness, along with a 13% reduction in the retransmission rate and an approximate 20% decrease in latency. Full article

Non-orthogonal multiple access (NOMA) has emerged as a key enabler of massive connectivity in next-generation wireless networks. However, conventional NOMA studies predominantly focus on two-user scenarios, limiting their scalability in practical multi-user environments. A critical challenge in these systems is error propagation in successive interference cancellation (SIC), which is further exacerbated by hardware distortions (HWDs). Hybrid NOMA (HNOMA) mitigates SIC errors and reduces system complexity, yet cell-edge users (CEUs) continue to experience degraded sum spectral efficiency (SSE) and throughput. Cooperative NOMA (C-NOMA) enhances CEU performance through retransmissions but incurs higher energy consumption. To address these limitations, this study integrates intelligent omni-surfaces (IOSs) into a cooperative hybrid NOMA (C-HNOMA) framework to enhance retransmission efficiency and extend network coverage. The closed-form expressions for average outage probability and throughput are derived, and a power allocation (PA) optimization framework is proposed to maximize SSE, with validation through Monte Carlo simulations. The introduction of a novel strong–weak strong–weak (SW-SW) user pairing strategy capitalizes on channel diversity, achieving an SSE improvement of ∼0.48% to ∼3.81% over conventional pairing schemes. Moreover, the proposed system demonstrates significant performance gains as the number of IOS elements increases, even under imperfect SIC (iSIC) and HWD conditions. By optimizing PA values, SSE is further enhanced by at least 2.24%, even with an SIC error of 0.01 and an HWD level of 8%. These results underscore the potential of an IOS-assisted C-HNOMA system with SW-SW pairing as a viable solution for improving multi-user connectivity, SSE, and system robustness in future wireless communication networks. Full article

Wireless sensor networks (WSNs) are fundamental for modern IoT applications, yet they remain highly vulnerable to jamming attacks, which significantly degrade communication reliability and energy efficiency. This paper proposes a novel adaptive cluster-based jamming mitigation algorithm designed for heterogeneous WSNs that integrate LoRa and Bluetooth Low Energy (BLE) technologies. The proposed strategy dynamically switches between communication protocols, optimizes energy consumption, and reduces retransmissions under interference conditions by leveraging real-time network topology adjustments and adaptive transmission power control. Through extensive experimental validation, we demonstrate that our mitigation mechanism reduces energy consumption by up to 38% and lowers packet retransmission rates by 47% compared to single-protocol networks under jamming conditions. Additionally, our results indicate that the hybrid LoRa-BLE approach outperforms standalone LoRa and BLE configurations in terms of network resilience, adaptability, and sustained data transmission under attack scenarios. This work advances the state-of-the-art by introducing a multi-protocol interference-resilient communication strategy, paving the way for more robust, energy-efficient, and secure WSN deployments in smart cities, industrial IoT, and critical infrastructure monitoring. Full article

The increasing deployment of IEEE 802.11ax (Wi-Fi 6) networks necessitates an accurate assessment of radiofrequency electromagnetic field (RF-EMF) exposure under realistic usage scenarios. This study investigates the duty cycle (DC) and corresponding exposure levels of Wi-Fi 6 in controlled laboratory conditions, focusing on bandwidth variations, multi-user scenarios, and application types. DC measurements reveal significant variability across internet services, with FTP upload exhibiting the highest mean DC (94.3%) under 20 MHz bandwidth, while YouTube 4K video streaming showed bursts with a maximum DC of 89.2%. Under poor radio conditions, DC increased by up to 5× for certain applications, emphasizing the influence of degraded signal-to-noise ratio (SNR) on retransmissions and modulation. Weighted exposure results indicate a reduction in average electric-field strength by up to 10× when incorporating DC, with maximum weighted exposure at 4.2 V/m (6.9% of ICNIRP limits) during multi-user scenarios. These findings highlight the critical role of realistic DC assessments in refining exposure evaluations, ensuring regulatory compliance, and advancing the understanding of Wi-Fi 6’s EMF exposure implications. Full article

The rapid growth of the Internet of Things (IoT) has contributed to significant challenges in dealing with congestion within IoT communications due to high packet error rates, latency, and interference in networks. With an emphasis on the Constrained Application Protocol (CoAP), the present study aims to propose the design and development of a novel congestion control mechanism, namely, Fast Response Congestion Control—Random Early Detection, abbreviated as FaCoCo-RED, along with performance analysis and comparison of congestion management efficacy between FaCoCo-RED and Default CoAP Congestion Control (Default CoAP CC) under a Cooja simulator on the Contiki OS platform. The findings from both experiment and performance analysis, which were based on statistical testing, showed that, under medium-scale to large-scale node networks across all traffic scenarios in this study, FaCoCo-RED significantly outperformed Default CoAP CC. The improvement can be seen in such metrics as average throughput, packet loss, response time, settling time, and retransmission timeout values (RTOs). The experimental findings also showed that FaCoCo-RED can perform effectively within the IoT networks, thus potentially enhancing the reliability and scalability of CoAP for large-scale and more complex IoT applications in the future. Full article

The rapid developments of 5G and B5G networks have posed higher demands on retransmission in certain scenarios. This article reviews classical finite-length coding performance prediction formulas and proposes rate prediction formulas for coded modulation retransmission scenarios. Specifically, we demonstrate that a recently proposed model for correcting these prediction formulas also exhibits high accuracy in coded modulation retransmissions. To enhance the generality of this model, we introduce a range variable ${\mathbf{P}}_{\mathbf{final}}$ to unify the predictions with different SNRs. Finally, based on simulation results, the article puts forth recommendations specific to retransmission with a high spectral efficiency. Full article

In this paper, a network comprising wireless devices equipped with buffers transmitting deadline-constrained data packets over a slotted-ALOHA random-access channel is studied. Although communication protocols facilitating retransmissions increase reliability, a packet awaiting transmission from the queue experiences delays. Thus, packets with time constraints might be dropped before being successfully transmitted, while at the same time causing the queue size of the buffer to increase. To understand the trade-off between reliability and delays that might lead to packet drops due to deadline-constrained bursty traffic with retransmissions, the scenario of a wireless network utilizing a slotted-ALOHA random-access channel is investigated. The main focus is to reveal the trade-off between the number of retransmissions and the packet deadline as a function of the arrival rate. Towards this end, analysis of the system is performed by means of discrete-time Markov chains. Two scenarios are studied: (i) the collision channel model (in which a receiver can decode only when a single packet is transmitted), and (ii) the case for which receivers have multi-packet reception capabilities. A performance evaluation for a user with different transmit probabilities and number of retransmissions is conducted. We are able to determine numerically the optimal probability of transmissions and the number of retransmissions, given the packet arrival rate and the packet deadline. Furthermore, we highlight the impact of transmit probability and the number of retransmissions on the average drop rate and throughput. Full article

The RPL protocol is essential for efficient communication within the Internet of Things (IoT) ecosystem, yet it remains vulnerable to various attacks, particularly in dense and mobile environments where it shows certain limitations and susceptibilities. This paper presents a comprehensive simulation-based analysis of the RPL protocol’s vulnerability to the Hello Flood attack in mobile environments. Using four different group mobility models—the Column Mobility Model (CMM), Reference Point Group Mobility Model (RPGM), Nomadic Community Mobility Model (NCM), and Pursue Mobility Model (PMM)—within the Cooja simulator, this study uniquely investigates the Hello Flood attack in mobile settings, an area previously overlooked. Our systematic evaluation focuses on critical performance metrics, including the Packet Delivery Ratio (PDR), End-to-End Delay (E2ED), throughput, Expected Transmission Count (ETX), and Average Power Consumption (APC). The findings reveal several key insights: PDR decreases significantly, indicating increased packet loss or delivery failures; ETX values rise, necessitating more packet retransmissions and routing hops; E2ED increases, introducing delays in routing decisions and data transmission times; throughput declines as the attack disrupts data flow; and APC escalates due to higher energy usage on packet transmissions, especially over extended paths. These results underscore the urgent need for robust security measures to protect RPL-based IoT networks in mobile environments. Furthermore, our work emphasizes the exacerbated impact of the attack in mobile scenarios, highlighting the evolving security requirements of IoT networks. Full article

With the maturation of digital radio frequency memory (DRFM) technology, various intra-pulse retransmission interference methods have emerged. These flexible and changeable retransmission interference methods pose significant challenges to radar detection tasks, particularly in modern battlefields. This paper proposes an attention-guided complex-valued transformer (AGCT) as a solution. First, the encoder maps the received signal contaminated by interference and noise into a high-dimensional space. Then, the dilated convolution block (DCB) group and attention block (AB) group in the mask estimator extract the delicate multi-scale features and large-scale features of the interference, respectively, to obtain a multidimensional space mask. Finally, the decoder restores interference to the time domain and outputs the estimated target echo using residual learning. Considering the characteristics of intra-pulse interference, we introduced the energy attention block (EAB) at the end of the DCBs and the ABs within our network. This addition ensures a heightened focus on extracting interference features. Furthermore, we implemented a curriculum learning strategy during the network training. This approach gradually acclimates the network to fit different types of retransmission interference, starting from simpler to more complex scenarios. Our extensive experiments, conducted under various conditions, have provided compelling evidence of the AGCT’s superior performance. Compared to the comparative network, the AGCT’s advantages are particularly pronounced under more harsh conditions, demonstrating its robustness and effectiveness. Full article

Deploying Internet of Things (IoT) on low-power lossy wireless sensor/actuator networks (LLN) in harsh industrial environments presents challenges such as dynamic link qualities due to noise, signal attenuations and spurious interferences. However, the critical demand for industrial applications is reliability of data delivery on low-cost low-power sensor/actuator devices. To address these issues, this paper proposes a fully autonomous scheduling approach, called Auto-Sched, which ensures reliability of data delivery for both downlink and uplink traffic scheduling and enhances network robustness against node/link failures. To ensure reliability, Auto-Sched assigns retransmission time slots based on the reliability constraints of the communication link. To avoid collision issues, Auto-Sched creates an upward pipeline-like communication schedule for uplink end-to-end data delivery, and a downward pipeline-like communication schedule for downlink scheduling. For enhancing network robustness, we propose a simple algorithm for real-time autonomous schedule reconstruction, when node or link failures occur, with minimal influence on communication overhead. Performance evaluations quantified the performance of our proposed approaches under a variety of scenarios comparing them with existing approaches. Full article

V2X communication is susceptible to attenuation and fading caused by external interference. This interference often leads to bit error and poor quality and stability of the wireless link, and it can easily disrupt packet transmission. In order to enhance communication reliability, the 3rd Generation Partnership Project (3GPP) introduced the Hybrid Automatic Repeat Request (HARQ) technology for both 4G and 5G systems. Nevertheless, it can be improved for poor communication conditions (e.g., heavy traffic flow, long-distance transmission), especially in advanced or cooperative driving scenarios. In this paper, we propose an Adaptive Hybrid Automatic Repeat Request (A-HARQ) scheme that can reduce the average block error rate, the average number of retransmissions, and the round-trip time (RTT). It adapts the Q-learning model to select the timing and frequency of retransmission to enhance the transmission reliability. We also design some transmission schemes—K-repetition, T-delay and [T, K]-overlap—which are used to shorten latency and avoid packet collision. Compared with the conventional 5G HARQ, our simulation results show that the proposed A-HARQ scheme decreases the system’s average BLER, the number of retransmissions, and the RTT to 5.55%, 1.55 ms, and 0.97 ms, respectively. Full article

Due to the significant propagation delay in underwater sensor networks, conflict retransmission in channel access protocols comes at a high cost. This poses a challenge in scenarios where multiple sensor nodes generate data frames with strong temporal correlations, such as in disaster warning applications. Traditional channel allocation and timeout-based retransmission mechanisms lead to considerable access delays, making it difficult to meet the requirements. To tackle this issue, we propose the asynchronous pattern-designed random access (APDRA) protocol. This protocol enhances the access probability by designing retransmission time intervals for data frames based on pattern design. Additionally, we introduce a successive interference cancellation (SIC) mechanism at the receiver for decoding. This mechanism facilitates the transformation of the conventional method of discarding conflicted data frames into iterative decoding, thereby enhancing transmission efficiency. Via the utilization of simulations, we compare the APDRA protocol conventional underwater medium access control (MAC) protocols and existing retransmission mechanisms. The results demonstrate that the APDRA protocol has the ability to improve both the transmission success ratio (TSR) and reduces the access delay to some extent. Full article

Broadcasting is a critical feature in V2X communication, allowing for the simultaneous dissemination of safety-critical messages to all nearby vehicles. However, the requirement for low latency in information dissemination and the need for reliable and efficient data transmission pose significant challenges to broadcasting in V2X communication systems. In this paper, we present a novel raptor-like coded broadcasting (RLCB) scheme for low-latency V2X communications. Firstly, we introduce feedback into a concatenated fountain code, and adjust its precoding and coding structure to achieve effective data deliverance under a limited number of retransmissions for low-latency transmission. Then, based on the raptor-like encoding and decoding structure, we propose a mutual exclusion-based network encoding (MENC) algorithm to enable retransmission in broadcasting scenarios. We also conduct a complexity analysis on the encoding and decoding process of our proposed scheme. Numerical results demonstrate the superior performance of our proposed scheme in reducing the packet error rate (PER) and improving spectral efficiency compared to the R10 code and hybrid automatic repeat request (HARQ) scheme. Full article

Mobile networks of the fifth generation have stringent requirements for data throughput, latency and reliability. Dual or multi-connectivity is implemented to meet the mobility requirements for certain essential 5G use cases, and this ensures the user’s connection to one or more radio links. Packet duplication (PD) over multi-connectivity is a method of compensating for lost packets by reducing re-transmissions on the same erroneous wireless channel. Utilizing two or more uncorrelated links, a high degree of availability can be attained with this strategy. However, complete packet duplication is inefficient and frequently unnecessary. The wireless channel conditions can change frequently and not allow for a PD. We provide a novel adaptive fractional packet duplication (A-FPD) mechanism for enabling and disabling packet duplication based on a variety of parameters. The signal-to-interference-plus-noise ratio (SINR) and fade duration outage probability (FDOP) are important performance indicators for wireless networks and are used to evaluate and contrast several packet duplication scenarios. Using ns-3 and MATLAB, we present our simulation results for the multi-connectivity and proposed A-FPD schemes. Our technique merely duplicates enough packets across multiple connections to meet the outage criteria. Full article