Search Results (8)

Background/Objectives: Surfactants are commonly used to protect proteins from denaturation and particle formation, thereby ensuring the long-term stability of biopharmaceuticals. Polysorbates (PS) 20 and 80 are the most widely used surfactants in the pharmaceutical industry. However, alternative excipients such as poloxamers are currently under investigation. In this study, mixed micelles (MMs) composed of phospholipids (PL) and polysorbate 20 (PS20) were explored as a novel stabilisation strategy, aiming to reduce the PS content in protein formulations by partial substitution with PL. Despite their favourable properties, including thermodynamic stability and small particle size, MMs have seen limited application, and no reports exist on their use for stabilising antibody solutions. Results: In a first step, PS20/PL ratios were identified, which are advantageous to form stable MM solutions, followed by an optimization of the formulation process by introducing a second heating step using the direct dispersion method. Successful MM formation was confirmed via transmission and dynamic light scattering analyses at total surfactant concentrations of up to 20 mg·mL⁻¹ and 50 mg·mL⁻¹, with PL contents of 50% and up to 40%, respectively. These surfactant concentrations of up to 20 mg·mL⁻¹ and 50 mg·mL⁻¹ are substantially higher than the surfactant concentrations that are typically used in final biopharmaceutical formulations (0.01–2 mg·mL⁻¹). Consequently, the mixed micellar system enables operation even at concentrations substantially above practical formulation limits. In the ensuing study, the stabilizing potential of the PL/PS20 micellar system was appraised through agitation studies. Methods: In these studies, bovine serum albumin was employed as a model protein, while a monoclonal antibody was used as a candidate therapeutic molecule. Stability was assessed through visual inspection, turbidity measurements, particle analysis, and size-exclusion chromatography. Conclusions: A protective effect comparable to that of PS20 alone was observed for both model proteins, demonstrating for the first time that MMs can effectively stabilise biologics. Full article

Background/Objectives: Polysorbate 80 (PS80), a complex surfactant mixture, is widely recognized for its ability to enhance drug permeation across the blood–brain barrier (BBB). While this effect is generally attributed to the combined actions of its components, the specific contribution and potential selectivity of individual minor components remain poorly understood. This study therefore aimed to isolate and compare the primary minor components of PS80 to determine whether they uniformly enhance BBB permeation or exhibit drug-specific functions. Methods: In this research, four primary minor components of PS80—polyoxyethylene sorbitan monooleate (PSM), polyoxyethylene isosorbide monooleate (PIM), polyoxyethylene sorbitan dioleate (PSD), and a polyethylene glycol/polyoxyethylene sorbitan/polyoxyethylene isosorbide mixture (PEG/PS/PI mixture)—were isolated using preparative liquid-phase chromatography. Drug-loaded formulations were then prepared using the solvent evaporation method incorporating five model drugs: 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindotricarbocyanine iodide (DiR, MW = 1013.39 Da), donepezil (MW = 379.49 Da), nimodipine (MW = 418.44 Da), chlorogenic acid (MW = 354.31 Da), and paclitaxel (MW = 853.92 Da). The permeability of these formulations across the BBB was evaluated in BALB/c mice after intravenous administration. Brain distribution of the lipophilic dye DiR was assessed using fluorescence imaging, whereas brain homogenate concentrations of therapeutic drugs were quantified by UPLC-MS/MS. Results: Results revealed that the enhancement of brain delivery was dependent on both the specific minor component and the drug. The PEG/PS/PI mixture specially enhanced the brain homogenate concentration of donepezil to 11.8 ± 1.2 ng/mL, representing a 6.9-fold enhancement, while PIM micelles increased the delivery of DiR, donepezil, and nimodipine. In contrast, PSM and PSD micelles improved transport of only DiR and donepezil. The broad performance of PIM suggests a more flexible formulation—a hypothesis that warrants further validation. Conversely, none of the different minor components enhanced the delivery of chlorogenic acid or paclitaxel, underscoring the critical role of specific drug–component interactions. Conclusions: This component-resolved insight challenges the conventional perception of PS80 and provides a rational framework for engineering precision brain-targeted delivery systems by selecting functional minor components. Full article

Sonodynamic therapy (SDT), utilizing ultrasound (US) and sonosensitizers, holds immense potential as a noninvasive and targeted treatment for a variety of deep-seated tumors. However, the clinical translation of SDT is hampered by several key limitations in sonosensitizers, especially their low aqueous stability and poor cellular uptake. In this study, non-ionic polysorbate (Tween 80, T80) was adopted to formulate effective nanocarriers for the safe and efficient delivery of sonosensitizers to cancer cells. Mitochondria-targeting triphenylphosphonium (TPP)-conjugated chlorin e6 (Ce6) sonosensitizer was loaded into T80-based micelles for efficient SDT. Pro-oxidant piperlongumine (PL) was co-encapsulated with TPP-conjugated Ce6 (T-Ce6) in T80 micelles to enable combination chemo-SDT. T80 micelles substantially enhanced the cellular internalization of T-Ce6. As a result, T80 micelles loaded with T-Ce6 and PL [T80(T-Ce6/PL)] significantly elevated intracellular reactive oxygen species (ROS) generation in MCF-7 human breast cancer cells upon US exposure. Moreover, T-Ce6 exhibited selective accumulation within the mitochondria, leading to efficient cell death under US irradiation. Importantly, T80(T-Ce6/PL) micelles caused cancer-specific cell death by selectively triggering apoptosis in cancer cells through PL. This study demonstrated the feasibility of using T80(T-Ce6/PL) micelles for efficient and cancer-specific combination chemo-SDT. Full article

The surfactants polysorbate 20 (PS20) and polysorbate 80 (PS80) are utilized to stabilize protein drugs. However, concerns have been raised regarding the degradation of PSs in biologics and the potential impact on product quality. Oxidation has been identified as a prevalent degradation mechanism under pharmaceutically relevant conditions. So far, a systematic stability comparison of both PSs under pharmaceutically relevant conditions has not been conducted and little is known about the dependence of oxidation on PS concentration. Here, we conducted a comparative stability study to investigate (i) the different oxidative degradation propensities between PS20 and PS80 and (ii) the impact of PS concentration on oxidative degradation. PS20 and PS80 in concentrations ranging from 0.1 mg⋅mL⁻¹ to raw material were stored at 5, 25, and 40 °C for 48 weeks in acetate buffer pH 5.5 and water, respectively. We observed a temperature-dependent oxidative degradation of the PSs with strong (40 °C), moderate (25 °C), and weak/no degradation (5 °C). Especially at elevated temperatures such as 40 °C, fast oxidative PS degradation processes were detected. In this case study, a stronger degradation and earlier onset of oxidation was observed for PS80 in comparison to PS20, detected via the fluorescence micelle assay. Additionally, degradation was found to be strongly dependent on PS concentration, with significantly less oxidative processes at higher PS concentrations. Iron impurities, oxygen in the vial headspaces, and the pH values of the formulations were identified as the main contributing factors to accelerate PS oxidation. Full article

(1) Background: Clozapine is the most effective antipsychotic. It is, however, associated with many adverse drug reactions. Nose-to-brain (N2B) delivery offers a promising approach. This study aims to develop clozapine-encapsulated thermosensitive sol–gels for N2B delivery. (2) Methods: Poloxamer 407 and hydroxypropyl methylcellulose were mixed and hydrated with water. Glycerin and carbopol solutions were added to the mixture and stirred overnight at 2–8 °C. Clozapine 0.1% w/w was stirred with polysorbate 20 (PS20) or polysorbate 80 (PS80) at RT (25 °C) before being added to the polymer solution. The final formulation was made to 10 g with water, stirred overnight at 2–8 °C and then adjusted to pH 5.5. (3) Results: Formulations F3 (3% PS20) and F4 (3% PS80) were selected for further evaluation, as their gelation temperatures were near 28 °C. The hydrodynamic particle diameter of clozapine was 18.7 ± 0.2 nm in F3 and 20.0 ± 0.4 nm in F4. The results show a crystallinity change in clozapine to amorphous. Drug release studies showed a 59.1 ± 3.0% (F3) and 53.1 ± 2.7% (F4) clozapine release after 72 h. Clozapine permeated after 8 h was 20.8 ± 3.0% (F3) and 17.8 ± 3.1% (F4). The drug deposition was higher with F4 (144.8 ± 1.4 µg/g) than F3 (110.7 ± 2.7 µg/g). Both sol–gels showed no phase separation after 3 months. (4) Conclusions: Binary PS80-P407 mixed micelles were more thermodynamically stable and rigid due to the higher synergism of both surfactants. However, binary mixed PS20-P407 micelles showed better drug permeation across the nasal mucosa tissue and may be a preferable carrier system for the intranasal administration of clozapine. Full article

The biological activities of curcumin in humans, including its antioxidative and anti-inflammatory functions, are limited by its naturally low bioavailability. Different formulation strategies have been developed, but the uptake of curcumin from these galenic formulations into and efflux from intestinal cells, which may be critical processes limiting bioavailability, have not been directly compared. Furthermore, little is known about their effect on P-glycoprotein activity, an important determinant of the pharmacokinetics of potentially co-administered drugs. P-glycoprotein activity was determined in LS180 cells, incubated with 30 or 60 µmol/L of curcumin in the form of seven different formulations or native curcuma extract for 1 h. All formulations inhibited P-glycoprotein activity at both concentrations. Curcumin uptake, after 1 h incubation of LS180 cells with the formulations (60 µmol/L), showed significant variability but no consistent effects. After 1 h pre-treatment with the formulations and further 8 h with curcumin-free medium, curcumin in cell culture supernatants, reflecting the efflux, differed between individual formulations, again without a clear effect. In conclusion, curcumin inhibits P-glycoprotein activity independently of its formulation. Its uptake by and efflux from intestinal cells was not significantly different between formulations, indicating that these processes are not important regulatory points for its bioavailability. Full article

The wettability of solids is important from both practical and theoretical viewpoints. In this study, we measured the contact angle of aqueous solutions of polysorbates (Tween 20, Tween 60, and Tween 80) on polytetrafluoroethylene (PTFE), polyethylene (PE), polymethyl methacrylate (PMMA), polyamide (nylon 6), and quartz. Based on the obtained results, the adsorption of Tween 20 (T20), Tween 60 (T60), and Tween 80 (T80) at the solid-water interface was determined based on the structure and size of their molecules. Next, the tendency of polysorbates to adsorb at the solid-water interface was considered based on the Gibbs standard free energy of adsorption ($\Delta G_{ads}^o$). This energy was evaluated using various methods, including a method we propose based on the critical micelle concentration (CMC) and the contact angle of water and solution at the CMC, as well as their surface tension. The $\Delta G_{ads}^o$ values obtained by this method were comparable to those calculated from the Langmuir equation. Taking into account the Tweens tendency to adsorb at the solid-water interface, the measured contact angle, the components and parameters of surface tension of Tweens solutions and solids, and the surface tension of water and its Lifshitz-van der Waals component that we determined, the wetting process in the solid-solution drop-air system was analyzed. The results based on the mentioned parameters showed that it is possible to predict the wettability of apolar, monopolar, and bipolar solids using the aqueous Tweens solution and their solution adhesion. Full article

Amphotericin B (AmB) and Nystatin (Nys) are the drugs of choice for treatment of systemic and superficial mycotic infections, respectively, with their full clinical potential unrealized due to the lack of high therapeutic index formulations for their solubilized delivery. In the present study, using a coarse-grained (CG) molecular dynamics (MD) simulation approach, we investigated the interaction of AmB and Nys with Polysorbate 80 (P80) to gain insight into the behavior of these polyene antibiotics (PAs) in nanomicellar solution and derive potential implications for their formulation development. While the encapsulation process was predominantly governed by hydrophobic forces, the dynamics, hydration, localization, orientation, and solvation of PAs in the micelle were largely controlled by hydrophilic interactions. Simulation results rationalized the experimentally observed capability of P80 in solubilizing PAs by indicating (i) the dominant kinetics of drugs encapsulation over self-association; (ii) significantly lower hydration of the drugs at encapsulated state compared with aggregated state; (iii) monomeric solubilization of the drugs; (iv) contribution of drug-micelle interactions to the solubilization; (v) suppressed diffusivity of the encapsulated drugs; (vi) high loading capacity of the micelle; and (vii) the structural robustness of the micelle against drug loading. Supported from the experimental data, our simulations determined the preferred location of PAs to be the core-shell interface at the relatively shallow depth of 75% of micelle radius. Deeper penetration of PAs was impeded by the synergistic effects of (i) limited diffusion of water; and (ii) perpendicular orientation of these drug molecules with respect to the micelle radius. PAs were solvated almost exclusively in the aqueous poly-oxyethylene (POE) medium due to the distance-related lack of interaction with the core, explaining the documented insensitivity of Nys solubilization to drug-core compatibility in detergent micelles. Based on the obtained results, the dearth of water at interior sites of micelle and the large lateral occupation space of PAs lead to shallow insertion, broad radial distribution, and lack of core interactions of the amphiphilic drugs. Hence, controlled promotion of micelle permeability and optimization of chain crowding in palisade layer may help to achieve more efficient solubilization of the PAs. Full article