Search Results (185)

The contamination of water bodies by industrial dyes poses a significant environmental challenge on a global scale. Conventional wastewater treatment methods often suffer from limitations related to high cost, limited efficiency, and potential secondary environmental impacts. Recent advances in photocatalytic technologies have highlighted the potential of metal sulfide-based photocatalysts, particularly those synthesized through environmentally friendly, plant-mediated approaches, as promising alternatives for efficient and sustainable dye degradation. However, despite their promising potential, metal sulfide photocatalysts often suffer from limitations such as photocorrosion, low stability under irradiation, and rapid recombination of charge carriers, which restrict their long-term applicability. In light of these challenges, this review provides a comprehensive examination of the physicochemical characteristics, synthetic strategies, and photocatalytic applications of metal sulfides. Particular emphasis is placed on green synthesis routes employing plant-derived extracts, which offer environmentally benign and sustainable alternatives to conventional methods. Moreover, the review elucidates various modification approaches, most notably, the formation of heterostructures, as viable strategies to enhance photocatalytic efficiency and mitigate the aforementioned drawbacks. The green synthesis of metal sulfides, aligned with the principles of green chemistry, offers a promising route toward the development of sustainable and environmentally friendly water treatment technologies. Full article

Rye regeneration in anther cultures is problematic and affected by albino plants. DNA methylation changes linked to Cu²⁺ ions in the induction medium affect reprogramming microspores from gametophytic to sporophytic path. Alternations in S-adenosyl-L-methionine (SAM), glutathione (GSH), or β-glucans and changes in DNA methylation in regenerants obtained under different in vitro culture conditions suggest a crucial role of biochemical pathways. Thus, understanding epigenetic and biochemical changes arising from the action of Cu²⁺ and Zn²⁺ that participate in enzymatic complexes may stimulate progress in rye doubled haploid plant regeneration. The Methylation-Sensitive Amplified Fragment Length Polymorphism approach was implemented to identify markers related to DNA methylation and sequence changes following the quantification of variation types, including symmetric and asymmetric sequence contexts. Reverse-Phase High-Pressure Liquid Chromatography (RP-HPLC) connected with mass spectrometry was utilized to determine SAM, GSH, and glutathione disulfide, as well as phytohormones, and RP-HPLC with a fluorescence detector to study polyamines changes originating in rye regenerants due to Cu²⁺ or Zn²⁺ presence in the induction medium. Multivariate and regression analysis revealed that regenerants derived from two lines treated with Cu²⁺ and those treated with Zn²⁺ formed distinct groups based on DNA sequence and methylation markers. Zn²⁺ treated and control samples formed separate groups. Also, Cu²⁺ discriminated between controls and treated samples, but the separation was less apparent. Principal coordinate analysis explained 85% of the total variance based on sequence variation and 69% of the variance based on DNA methylation changes. Significant differences in DNA methylation characteristics were confirmed, with demethylation in the CG context explaining up to 89% of the variance across genotypes. Biochemical profiles also demonstrated differences between controls and treated samples. The changes had different effects on green and albino plant regeneration efficiency, with cadaverine (Cad) and SAM affecting regeneration parameters the most. Analyses of the enzymes depend on the Cu²⁺ or Zn²⁺ ions and are implemented in the synthesis of Cad, or SAM, which showed that some of them could be candidates for genome editing. Alternatively, manipulating SAM, GSH, and Cad may improve green plant regeneration efficiency in rye. Full article

As eco-friendly processes become central to modern organic synthesis, plant-based materials are emerging as attractive alternatives for both nanoparticle fabrication and catalysis. In this study, we explore the use of clove extract, a natural and renewable resource, for the green synthesis of copper oxide (CuO) nanoparticles and their subsequent application in organic transformations. Clove extract was employed to reduce copper chloride via a simple co-precipitation method under mild conditions, yielding CuO nanoparticles characterized by XRD, FTIR, and SEM-EDX techniques. These nanoparticles were then used as catalysts in the copper-catalyzed azide–alkyne cycloaddition (CuAAC) to afford eugenol-based 1,2,3-triazoles in excellent yields. This dual use of clove extract exemplifies a sustainable approach that merges natural product valorization with efficient catalysis for triazole synthesis. Full article

Plants of the Annona genus have garnered increasing scientific interest due to their rich phytochemical profile and broad spectrum of biological activities, which include antimicrobial, antiproliferative, and cytotoxic effects. Among the most studied compounds are acetogenins and Annonacins, which exhibit potent bioactivity and have been identified as key agents in the green synthesis and stabilization of nanomaterials. In recent years, the integration of Annona plant extracts—particularly from leaves—into nanotechnology platforms has opened new avenues in the development of eco-friendly and biocompatible nanostructures for biomedical applications. This review provides a comprehensive overview of the current knowledge regarding the antimicrobial properties of nanomaterials synthesized using extracts from Annona species. This review encompasses 74 indexed articles published between 2012 and 2023, focusing on the synthesis of nanomaterials using extracts from this genus that exhibit antimicrobial and biomedical properties. The search was conducted in databases such as Google Scholar, Web of Science, and Scopus. Emphasis is placed on their antibacterial, antifungal, and anthelmintic effects, as well as additional therapeutic potentials, such as antidiabetic, antihypertensive, antiproliferative, and cytotoxic activities. The analysis of the recent literature highlights how Annona-derived phytochemicals contribute significantly to the functionalization and enhanced biological performance of these nanomaterials. This work aims to support future research focused on the rational design of Annona-based nanostructures as promising candidates in antimicrobial and therapeutic strategies. Full article

In the present study, a photodegradation technique was employed for the removal of methylene blue dye from aqueous solution using a tungsten oxide-based photocatalyst. The photocatalyst was synthesized via a green synthesis route utilizing a plant extract (PE) under acidic conditions. The synthesized photocatalyst was characterized by various spectroscopic and microscopic techniques that confirmed the presence of various functional groups on the catalyst surface and revealed a narrow bandgap of ~3.0 eV. The synthesized particles exhibited a nanoscale dimension ranging from 10 to 15 nm. The photocatalytic activity of the material was evaluated under ultraviolet light, visible light, and sunlight irradiation, demonstrating the efficient degradation of methylene blue under all light sources. Furthermore, catalysis reusability studies indicated excellent stability, with consistent photocatalytic performance observed after five successive cycles. Full article

Green synthesis of silver nanoparticles (AgNPs) using plant extracts has emerged as a sustainable and eco-friendly alternative to conventional physical and chemical methods. This review provides a comprehensive overview of plant-mediated synthesis routes, emphasizing the influence of phytochemicals on nanoparticle formation, morphology, and stability. The physicochemical properties of AgNPs, such as size, shape, and surface characteristics, are critically examined in relation to synthesis parameters, summarizing the plant species employed and associated reaction conditions. The wide-ranging applications of plant-based AgNPs are explored, including antimicrobial, agricultural, environmental, industrial, and biomedical uses, such as drug delivery and wound healing. The section is supported with recent application-specific studies to their corresponding nanoparticle properties, highlighting the relationship between structure and function. Finally, this review discusses current challenges, particularly potential toxicity considerations, and outlines future perspectives for standardization, mechanistic understanding, and translational potential in wide-ranging applications. Full article

Nanostructured silica-based materials, including mesoporous silica nanoparticles (SiNPs), show a wide range of applications in various areas, such as food, pharmaceutical, and cosmetic industries. This is mainly due to their unique properties, namely biocompatibility, stability, adjustable pore size, a highly developed specific surface area, and simplicity in surface modification. Currently, special emphasis is placed on obtaining nanostructured silica-based materials using so-called green methods, which not only reduce toxic by-products, but also enable the use of raw materials from plants, agricultural and industrial waste, as well as bacteria or fungi. This trend is particularly evident in the cosmetic industry, which is striving to reduce the adverse environmental and social impacts of cosmetic production. Therefore, this article presents a review of the literature from the last ten years, which describes issues related to the possibilities of replacing synthetic silica-based ingredients in cosmetic products with their more environmentally friendly counterparts. Special emphasis has been placed on the application possibilities of sustainable nanostructured silica-based materials and their potential toxicity in topical formulations. The possibilities of obtaining nanostructured silica-based materials through green synthesis and using natural silica precursors have been briefly presented, as well as the options for modifying the surface of these materials. Full article

Silver nanoparticles, with various uses in pharmacy, cosmetics, sanitation, textiles, optoelectronics, photovoltaics, etc., that are provided by worldwide industrial production, estimated to hundreds of tons annually, are finally released in the environment impacting randomly the biosphere. An alternative synthesis approach could be implemented by replacing chemical reductants of silver with natural antioxidants ensuring production and utilization sustainability with focus on environmental pollution diminishing. We synthesized silver nanoparticles by using plant extracts, aiming to offer antimicrobial products with reduced impact on the environment through sustainable green-chemistry. Fresh extracts of lemon pulp, blueberry and blackberry fruits as well as of green tea dry leaves were the sources of the natural antioxidants able to ensure ionic silver reduction and silver nanoparticle formation in the form of colloidal suspensions. The four samples were characterized by UV–Vis spectrophotometry, scanning electron microscopy, dark field optical microscopy, X-ray diffractometry, dynamic light scattering, which evidenced specific fine granularity, plasmonic features, standard crystallinity, and good stability in water suspension. Antimicrobial activity was assayed using the agar diffusion method and the bacteria kill-time technique against Staphylococcus aureus and Escherichia coli. In both cases, all silver nanoparticles revealed their adequacy for the aimed purposes, the sample synthesized with green tea showing the best efficiency, which is in concordance with its highest contents of polyphenols, flavones and best total antioxidant activity. Various applications could be safely designed based on such silver nanoparticles for sustainable chemistry development. Full article

An aqueous leaf extract of Egeria densa was used to green-synthesize iron (II) and iron (III) oxide nanoparticles from ferrous sulphate and ferric chloride, respectively. The successful green synthesis of the nanoparticles was confirmed through UV–visible spectroscopy, and the colour of the mixtures changed from light-yellow to green-black and reddish-brown for FeO–NPs and Fe₂O₃–NPs, respectively. The morphological characteristics of the nanoparticles were determined using an X-ray diffractometer (XRD), a Fourier transform infrared spectrophotometer (FTIR), a transmission electron microscope (TEM), and energy-dispersive X-ray spectroscopy (EDX). The UV–Vis spectrum of the FeO–NPs showed a sharp peak at 290 nm due to the surface plasmon resonance, while that of the Fe₂O₃–NPs showed a sharp peak at 300 nm. TEM analysis revealed that the FeO–NPs were oval to hexagonal in shape and were clustered together with an average size of 18.49 nm, while the Fe₂O₃-NPs were also oval to hexagonal in shape, but some were irregularly shaped, and they clustered together with an average size of 27.96 nm. EDX analysis showed the presence of elemental iron and oxygen in both types of nanoparticles, indicating that these nanoparticles were essentially present in oxide form. The XRD patterns of both the FeO–NPs and Fe₂O₃–NPs depicted that the nanoparticles produced were crystalline in nature and exhibited the rhombohedral crystal structure of hematite. The FT-IR spectra revealed that phenolic compounds were present on the surface of the nanoparticles and were responsible for reducing the iron salts into FeO–NPs and Fe₂O₃–NPs. Conclusively, this work demonstrated for the first time the ability of Elodea aqueous extract to synthesize iron-based nanoparticles from both iron (II) and iron (III) salts, highlighting its versatility as a green reducing and stabilizing agent. The dual-path synthesis approach provides new insights into the influence of the precursor oxidation state on nanoparticle formation, thereby expanding our understanding of plant-mediated nanoparticle production and offering a sustainable route for the fabrication of diverse iron oxide nanostructures. Furthermore, it provides a simple, cost-effective, and environmentally friendly method for the synthesis of the FeO–NPs and Fe₂O₃–NPs using Egeria densa. Full article

Forest ecosystems represent a natural repository of biodiversity, bioenergy, food, timber, water, medicine, wildlife shelter, and pollution control. In many countries, forests offer great potential to provide biogenic resources that could be utilized for large-scale biotechnological synthesis and products. The evolving nanotechnology could be an excellent platform for the transformation of forest products into value-added nanoparticles (NPs). It also serves as a tool for commercial production, placing the forest at the heart of conservation and sustainable management strategies. NPs are groups of atoms with a size ranging from 1 to 100 nm. This review analyzes the scholarly articles published over the last 25 years on the forest and woody plant-based green synthesis of NPs, highlighting the plant parts and applications discussed. The biosynthesis of nanomaterials from plant extracts provides inexpensiveness, biocompatibility, biodegradability, and environmental nontoxicity to the resultant NPs. The leaf is the most critical organ in woody plants, and it is widely used in NP biosynthesis, perhaps due to its central functions of bioactive metabolite production and storage. Most biosynthesized NPs from tree species have been used and tested for medical applications. For sustainable advancements in forest-based nanotechnology, broader species coverage, expanded applications, and interdisciplinary collaboration are essential. Full article

The yellow-to-green mutation in plant leaf color can be easily identified and used as a marker trait for seed purity identification, improved variety breeding, hybrid purity identification, and hybrid production. In this study, the leaves of yellow-to-green mutant ytg-1 of snap bean were selected as the experimental material, and the physiological mechanism underlying the leaf color change was studied. The mechanism was observed to belong to the lack of recovery type in the total chlorophyll stage. The decrease in chlorophyll content was due to the inhibition of the synthesis of Proto IX to Mg Proto IX. Genetic analysis revealed that a single recessive gene, pvytg-1, controlled the mutation trait. The gene was located in the 80-kb region of chromosome 10. Overall, six genes were observed within this interval, and based on gene functional annotation, Phvul.010G041700 was identified as the candidate gene. Sequencing and identification of Phvul.010G041700 revealed a single base insertion in ytg-1 compared with the wild-type, resulting in premature termination of the gene. The results of this study will facilitate the breeding and genetic improvement of snap bean in the future. Full article

Since the publication of the 12 principles of green chemistry in 1998 by Paul Anastas and John Warner, the green synthesis of metal and metal oxide nanoparticles has emerged as an eco-friendly and sustainable alternative to conventional chemical methods. Plant-based synthesis utilizes natural extracts as reducing and stabilizing agents, minimizing harmful chemicals and toxic by-products. Ag nanoparticles (Ag-NPs) exhibit strong antibacterial activity; Au nanoparticles (Au-NPs) are seen as a promising carrier for drug delivery and diagnostics because of their easy functionalization and biocompatibility; and ZnO nanoparticles (ZnO-NPs), on the other hand, produce reactive oxygen species (ROS) that kill microorganisms effectively. These nanoparticles also demonstrate antioxidant properties by scavenging free radicals, reducing oxidative stress, and preventing degenerative diseases. Green syntheses based on plant extracts enhance biocompatibility and therapeutic efficacy, making them suitable for antimicrobial, anticancer, and antioxidant applications. Applying a similar “green synthesis” for advanced nanostructures like graphitic carbon nitride (GCN) is an environmentally friendly alternative to the traditional ways of doing things. GCN exhibits exceptional photocatalytic activity, pollutant degradation efficiency, and electronic properties, with applications in environmental remediation, energy storage, and biomedicine. This review highlights the potential of green-synthesized hybrid nanocomposites combining nanoparticles and GCN as sustainable solutions for biomedical and environmental challenges. The review also highlights the need for the creation of a database using a machine learning process that will enable providing a clear vision of all the progress accomplished till now and identify the most promising plant extracts that should be used for targeted applications. Full article

This work reports the synthesis of two monometallic catalysts, Cu/Al₂O_3, and Pd/Al₂O₃, using a green approach based on Mexican oregano (Lippia graveolens), a common food condiment. Its extract has been largely overlooked as a high-technology reactive for synthesizing catalysts, metallic or oxide nanoparticles, unlike other green leaf plants. The green synthesis was compared with a conventional catalyst synthesis methodology using commercial chemical reducing agents. Oregano extract shows promise for novel applications extending beyond its culinary use, valorizing it as a chemical reducer to produce catalysts. Thus, this kind of application could significantly elevate the value of oregano, empowering communities that rely on its cultivation for economic benefit and transforming the plant from a low-profit agro-industrial product to a high-added-value crop. The reduction kinetics involved in the formation of nanoparticles were monitored up to the first stage of nucleation and a first-order model adequately described the data. Activation energy analysis showed that the chemical reaction mechanism has a dominant role in controlling the reaction, compared to mass transfer effects. Notoriously, the Pd/Al₂O₃ green synthesis catalyst showed the smallest mean particle size (4.85 ± 1.30 nm). These findings underscore the potential of green synthesis as an economically viable and environmentally friendly alternative for producing catalysts. Concerning the 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) as a biomass-derived molecule, its oxidation with H₂O₂ using both Pd/Al₂O₃ catalysts (by green and chemical synthesis methods) exhibited significantly higher selectivity toward 2,5-diformylfuran (DFF) compared to Cu/Al₂O₃ catalysts, suggesting a possible inhibitory effect. Full article

Background/Objectives: This study reports the green synthesis, optimization, characterization, and multifunctional evaluation of silver nanoparticles (AgNPs) using an ethanolic Aronia melanocarpa berry extract. The objective was to establish optimal synthesis conditions; assess the in vitro stability; and evaluate the antioxidant, photocatalytic, and photoprotective activities. Methods: The cytogenotoxic effects of the AgNPs were evaluated on Triticum aestivum roots. The AgNPs were synthesized via bioreduction using an ethanolic extract of A. melanocarpa under varied pH, AgNO₃ concentration, extract/AgNO₃ ratio, temperature, and stirring time, with optimization guided by UV–Vis spectral analysis. The AgNPs were further characterized by FTIR, DLS, TEM, and EDX. In vitro stability was evaluated over six months in different dispersion media (ultrapure water; 5% NaCl; and PBS at pH 6, 7, and 8). Biological assessments included antioxidant assays (lipoxygenase inhibition, DPPH radical scavenging, metal chelation, and hydroxyl radical scavenging), photocatalytic dye degradation, and SPF determination. Results: Optimal synthesis was achieved at pH 8, 3 mM AgNO₃, extract/AgNO₃ ratio of 1:9, 40 °C, and 240 min stirring. The AgNPs were spherical (TEM), well dispersed (PDI = 0.32), and highly stable (zeta potential = −40.71 mV). PBS pH 6 and 7 ensured the best long-term colloidal stability. The AgNPs displayed strong dose-dependent antioxidant activity, with superior lipoxygenase inhibition (EC₅₀ = 18.29 µg/mL) and the effective photocatalytic degradation of dyes under sunlight. Photoprotective properties were confirmed through UV absorption analysis. The AgNPs showed a strong antimitotic effect on wheat root cells. Conclusions: The study demonstrates that A. melanocarpa-mediated AgNPs are stable, biologically active, and suitable for potential biomedical, cosmetic, and environmental applications, reinforcing the relevance of plant-based nanotechnology. Full article

Traditional methods of synthesizing nanoparticles often rely on physical and chemical processes using synthetic hazardous chemicals. In contrast, the rise in green chemistry emphasizes using bioactive compounds from plants for the eco-friendly synthesis of nanostructures. These green synthesis techniques are increasingly recognized for their simplicity, cost-effectiveness, and ability to yield non-toxic by-products, an approach that aligns with sustainable practices. In this research, a straightforward, cheap, environmentally friendly, and sustainable procedure was developed to fabricate Zinc oxide nanoparticles (ZnO-NPs) employing three different pulp extracts: Agave (Agave americana), Chiku (Manilkara zapota), and Soursop (Annona muricata) to serve in the synthesis as capping, reduction, or stabilization agent. Analytical characterization techniques confirmed the successful phytosynthesis of ZnO-NPs, evidenced by significant absorbance peaks of UV-Vis spectra at 362 nm, and the chemical composition of ZnO without noticeable traces of phytochemical residues by carrying out ATR-FTIR analysis. SEM, STEM microscopies, and XRD analysis verified that the ZnO nanoparticles possess spherical geometries and hexagonal crystal structures. The average size of these nanoparticles was around 15.94, 18.08, and 23.32 nm for Agave, Chiku, and Soursop extract-based synthesis, respectively. Additionally, the in vitro antibacterial activity of phytosynthetized ZnO-NPs was evaluated against E. coli and S. aureus, confirming effective bacterial growth inhibition and demonstrating their significant antimicrobial potential. Full article