Search Results (5)

The large-scale production of microbial bioplastics remains limited by high production costs, reliance on refined substrates, and inefficient utilization of agro-industrial residues. Although sugarcane bagasse has been explored as a carbon source for polyhydroxyalkanoate production, studies have predominantly focused on poly (3-hydroxybutyrate) (PHB), with limited reports on copolymer synthesis from pentose-rich lignocellulosic streams. In this study, a newly isolated Bacillus sp. HLI02 was employed for the biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), using pentosan-rich sugarcane bagasse hydrolysate as an inexpensive and sustainable carbon source. Fermentation parameters were systematically optimized at different pH and temperature, and the strain demonstrated efficient conversion of xylose-rich hydrolysate into PHBV without the requirement for external nutrient supplementation. Under optimized conditions (pH 7.0, 37 °C, and C/N ratio of 40), a maximum PHBV yield of 2 g/L, corresponding to 59.5% of cell dry weight, was achieved. Structural and compositional analyses using Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy confirmed successful PHBV copolymer formation with well-defined structural characteristics. Thermal analysis revealed a decomposition temperature of 166 °C, indicating good thermal stability. The produced PHBV further exhibited favourable biocompatibility and biodegradability, supporting its potential applicability in sustainable packaging and related sectors. This work demonstrates the effective conversion of hemicellulosic sugarcane bagasse hydrolysate into PHBV using a newly isolated Bacillus strain, highlighting an underexplored route for copolymer production from agro-waste–derived C5 sugars. By integrating low-cost feedstock utilization with process optimization and comprehensive polymer characterization, this study contributes to the development of economically viable and sustainable bio-based polymer production strategies. Full article

The global demand for sustainable energy has accelerated the development of biofuels, aiming to reduce fossil fuel reliance and environmental impact. Second-generation ethanol (2G), produced from lignocellulosic biomass such as sugarcane bagasse and straw, is a promising alternative aligned with the circular economy. Its production relies on pretreatments to improve the enzymatic access to polysaccharides. Among the available methods, the organosolv (O) and hydrothermal (H) pretreatments are effective in separating the biomass into cellulose-rich pulps and hemicellulosic liquors. In this study, these pretreatments were applied to sugarcane bagasse (SCB) and straw (SS), aiming to obtain hemicellulosic fractions for bioconversion. The characterization of pretreated biomasses showed increased cellulose content, indicating successful delignification. After the lignin precipitation, the hemicellulosic liquors were submitted to enzymatic hydrolysis, with increases in the total reducing sugar (TRS) concentrations, from 11.144 to 13.440 g·L⁻¹ (SBO), 16.507 to 22.492 g·L⁻¹ (SBH), 8.560 to 9.478 g·L⁻¹ (SSO), and 14.164 to 22.830 g·L⁻¹ (SSH), with highlights for the hydrothermal pretreated hydrolysates in the improvement of sugar release. HPLC confirmed these gains, notably in the xylose content. The results indicated the potential of hemicellulosic liquors for the fermentation of pentoses, supporting integrated bioethanol production. This approach promotes the efficient use of agro-residues and strengthens the role of biofuels in low-carbon and sustainable energy systems. Full article

Bioethanol, an alcohol produced by microbial fermentation, is traditionally produced from sugar-rich plants such as sugar cane, sugar beet and maize. However, there is growing interest in the use of lignocellulose, an abundant and inexpensive renewable energy source, as a potential substitute for the production of biofuels and biochemicals. Yeast Saccharomyces cerevisiae, which is commonly used for ethanol fermentation, cannot cope with lignocellulose due to a lack of lignocellulolytic enzymes and the inefficient functioning of the pentose phosphate pathway. The aim of this research was to isolate yeasts that can efficiently produce bioethanol and valuable byproducts from both glucose and xylose in a two-stage fermentation process using brewer’s spent grains. This approach should maximize sugar utilization and improve the economic viability of bioethanol production while contributing to waste valorization and sustainability. Kluyveromyces marxianus and Candida krusei were identified and tested with different initial concentrations of glucose and xylose. The results showed that both yeasts produced bioethanol from glucose but were inefficient with xylose, yielding valuable compounds, such as 2,3-butanediol and glycerol instead. A two-stage fermentation was then carried out with weak acidic hydrolysate from brewer’s spent grain. In the first stage, glucose was fermented by S. cerevisiae to produce bioethanol; in the second stage, xylose was fermented by K. marxianus and C. krusei to obtain other valuable products. Full article

The extracted olive pomace (EOP) is an industrial lignocellulosic by-product of olive pomace oil extraction, currently mainly used for energy production through combustion. In this work, the hemicellulosic fraction of EOP was selectively hydrolyzed by diluted acid hydrolysis to obtain pentose-rich hydrolysates that can potentially be upgraded by Debaryomyces hansenii, targeting xylitol production. The monosaccharides and degradation by-products released along the pre-treatment were quantified and several detoxification methods for the removal of potentially toxic compounds were evaluated, including pH adjustment to 5.5, the use of anion-exchange resins, adsorption into activated charcoal, concentration by evaporation, and membrane techniques, i.e., nanofiltration. The latter approach was shown to be the best method allowing the full removal of furfural, 41% of 5-hydroxymethylfurfural, 54% of acetic acid, and 67% of the phenolic compounds present in the hydrolysate. The effects of the supplementation of both non-detoxified and detoxified hydrolysates were also assessed. The non-detoxified hydrolysate, under aerobic conditions, supported the yeast growth and xylitol production at low levels. Supplementation with the low-cost corn steep liquor of the nanofiltration detoxified hydrolysate showed a higher xylitol yield (0.57 g/g) compared to the non-detoxified hydrolysate. The highest xylitol productivity was found in hydrolysate detoxified with anionic resins (0.30 g/L·h), which was 80% higher than in the non-detoxified culture medium. Overall, the results showed that EOP dilute acid hydrolysates can efficiently be used for xylitol production by D. hansenii if detoxification, and supplementation, even with low-cost supplements, are performed. Full article

Cutaneotrichosporon oleaginosus is a highly efficient single cell oil producer, which in addition to hexoses and pentoses can metabolize organic acids. In this study, fed-batch cultivation with consumption-based acetic acid feeding was further developed to integrate the transformation of an industrial paper mill lignocellulosic hydrolysate (LCH) into yeast oil. Employing pentose-rich LCH as a carbon source instead of glucose significantly improved both biomass formation and lipid titer, reaching 55.73 ± 5.20 g/L and 42.1 ± 1.7 g/L (75.5% lipid per biomass), respectively. This hybrid approach of using acetic acid and LCH in one process was further optimized to increase the share of bioavailable carbon from LCH using a combination of consumption-based and continuous feeding. Finally, the techno-economic analysis revealed a 26% cost reduction when using LCH instead of commercial glucose. In summary, we developed a process leading to a holistic approach to valorizing a pentose-rich industrial waste by converting it into oleochemicals. Full article