Search Results (24)

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) offer distinct advantages over their low-temperature counterparts. However, their commercial viability is significantly hampered by durability challenges stemming from electrocatalyst support degradation in the corrosive phosphoric acid environment. This review provides a comprehensive analysis of advanced strategies to overcome this critical durability issue. Two main research directions are explored. The first involves engineering more robust carbon-based materials, including graphitized carbons, carbon nanostructures (nanotubes and graphene), and heteroatom-doped carbons, which enhance stability by modifying the carbon’s intrinsic structure and surface chemistry. The second direction focuses on replacing carbon entirely with intrinsically stable non-carbonaceous materials. These include metal oxides (e.g., TiO₂, SnO₂), transition metal carbides (e.g., WC, TiC), and nitrides (e.g., Nb₄N₅). For these non-carbon materials, a key focus is on overcoming their typically low electronic conductivity through strategies such as doping and the formation of multi-component composites. The analysis benchmarks the performance and durability of these advanced supports, concluding that rationally designed composite materials, which combine the strengths of different material classes, represent the most promising path toward developing next-generation, long-lasting catalysts for HT-PEMFCs. Full article

This study presents the development of a novel Cu–Co–O-codoped graphitic carbon nitride (g-C₃N₄) catalyst for efficient peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX) in aqueous environments. The synthesized Cu–Co–O-g-C₃N₄ catalyst demonstrated exceptional catalytic performance, achieving 90% SMX removal within 10 min—significantly outperforming pristine g-C₃N₄ (14%) and O-doped g-C₃N₄ (22%)—with a reaction rate constant of 0.63 min⁻¹. The superior activity was attributed to the synergistic effects of Cu-Co bimetallic doping and oxygen incorporation, which enhanced the active sites, stabilized metal ions, and minimized leaching. Mechanistic studies revealed a dual-pathway degradation process: (1) a radical pathway dominated by sulfate radicals (SO₄•⁻) and (2) a non-radical pathway driven by singlet oxygen (¹O₂), with the latter identified as the dominant species through quenching experiments. The catalyst exhibited broad pH adaptability and optimal performance at neutral to alkaline conditions. Characterization techniques (XRD, FTIR, XPS) confirmed successful doping and revealed that oxygen incorporation modified the electronic structure of g-C₃N₄, improving charge carrier separation. This work provides a sustainable strategy for antibiotic removal, addressing key challenges in advanced oxidation processes (AOPs), and highlights the potential of multi-heteroatom-doped carbon nitride catalysts for water purification. Full article

Graphite carbon nitride (g-C₃N₄) is a low band gap non-metallic polymer semiconductor that has broad application prospects and is an ideal material for absorbing visible light, as g-C₃N₄ materials have strong oxidation properties and are easy to modify. The structure formation of g-C₃N₄-based materials makes a series of photocatalytic synthesis reactions possible and improves photocatalytic reaction activity. In this paper, the development history, structures, and performance of g-C₃N₄ are briefly introduced, and the modification strategies of g-C₃N₄ are summarized to improve its photocatalytic and photoelectric catalytic properties via doping, heterojunction construction, etc. The light absorption and utilization of the catalysts are also analyzed in terms of light source conditions, and the application of g-C₃N₄ and its modified materials in photocatalysis and photocatalytic degradation is reviewed. Full article

The electrochemical reduction of CO₂ (CO₂RR) to valuable chemicals and fuels is a promising strategy for addressing environmental challenges. Graphitic carbon nitride (g-C₃N₄) is a promising electrocatalyst for CO₂ reduction. However, poor electron transfer and low CO₂ affinity often limit its catalytic performance. In this study, we employ density functional theory (DFT) calculations to systematically investigate the effect of various non-metal dopants (B, P, O, and S) on the electronic structure and CO₂ adsorption properties of g-C₃N₄. Our results demonstrated that O-C₃N₄ preferentially catalyzes the formation of HCOOH with a low limiting potential of −0.12 V. Meanwhile, S-C₃N₄ efficiently promotes the generation of CH₂O, CH₃OH, and CH₄ at a limiting potential of −0.58 V, as well as CO at −0.77 V. These findings provide valuable insights toward the rational design of effective non-metal-doped g-C₃N₄ catalysts for efficient CO₂ conversion. Full article

Developing highly active and durable non-noble metal catalysts is crucial for energy conversion and storage, especially for proton exchange membrane fuel cells (PEMFCs) and lithium-oxygen (Li-O₂) batteries. Non-noble metal catalysts are considered the greatest potential candidates to replace noble metal catalysts in PEMFCs and Li-O₂ batteries. Herein, we propose a novel type of non-noble metal catalyst (Fe-Hf/N/C) doped with Hf into a mesoporous carbon material derived from Hf-ZIF-8 and co-doping with Fe and N, which greatly enhanced the activity and durability of the catalyst. When applied in the cathode of PEMFCs, the current density can reach up 1.1 and 1.7 A cm⁻² at 0.7 and 0.6 V, respectively, with a maximum power density of 1.15 W cm⁻². The discharge capacity of the Li-O₂ batteries is up to 15,081 mAh g⁻¹ with Fe-Hf/N/C in the cathode, which also shows a lower charge overpotential, 200 mV lower than that of the Fe/N/C. Additionally, the Fe-Hf/N/C catalyst has demonstrated better stability in both PEMFCs and Li-O₂ batteries. This reveals that Hf can not only optimize the electronic structure of iron sites and increase the active sites for the oxygen reduction reaction, but can also anchor the active sites, enhancing the durability of the catalyst. This study provides a new strategy for the development of high-performance and durable catalysts for PEMFCs and Li-O₂ batteries. Full article

Metal air batteries have gradually attracted public attention due to their advantages such as high power density, high energy density, high energy conversion efficiency, and clean and green products. Reasonable design of oxygen reduction reaction (ORR) catalysts with high cost-effectiveness, high activity, and high stability is of great significance. Metal organic frameworks (MOFs) have the advantages of large specific surface area, high porosity, and designability, which make them widely used in many fields, especially in catalysis. This paper starts with regulating and optimizing the composition and structure of MOFs. A series of N, S co-doped electrocatalysts FeCuS-N-C were prepared by two high-temperature pyrolysis processes using N-doped carbon hollow nanorods derived from ZIF-8 as the substrate. The one-dimensional nanorod material derived from this MOF exhibits excellent electrocatalytic ORR performance (Eonset = 0.998 V, E_1/2 = 0.874 V). When used as the air cathode catalyst for zinc air batteries and assembled into liquid ZABs, the battery discharge curve was calculated and found to have a maximum power density of 142.7 mW cm⁻², a specific capacity of 817.1 mAh gZn⁻¹, and a cycling stability test of over 400 h. This study provides an innovative approach for designing and optimizing non-precious metal catalysts for zinc air batteries. Full article

This current study assessed the impacts of morphology adjustment of perovskite BiFeO₃ (BFO) on the construction and photocatalytic activity of P-infused g-C₃N₄/U-BiFeO₃ (U-BFO/PCN) heterostructured composite photocatalysts. Favorable formation of U-BFO/PCN composites was attained via urea-aided morphology-controlled hydrothermal synthesis of BFO followed by solvosonication-mediated fusion with already synthesized P-g-C₃N₄ to form U-BFO/PCN composites. The prepared bare and composite photocatalysts’ morphological, textural, structural, optical, and photocatalytic performance were meticulously examined through various analytical characterization techniques and photodegradation of aqueous rhodamine B (RhB). Ellipsoids and flakes morphological structures were obtained for U-BFO and BFO, and their effects on the successful fabrication of the heterojunctions were also established. The U-BFO/PCN composite exhibits 99.2% efficiency within 20 min of visible-light irradiation, surpassing BFO/PCN (88.5%), PCN (66.8%), and U-BFO (26.1%). The pseudo-first-order kinetics of U-BFO/PCN composites is 2.41 × 10⁻¹ min⁻¹, equivalent to 2.2 times, 57 times, and 4.3 times of BFO/PCN (1.08 × 10⁻¹ min⁻¹), U-BFO, (4.20 × 10⁻³ min⁻¹), and PCN, (5.60 × 10⁻² min⁻¹), respectively. The recyclability test demonstrates an outstanding photostability for U-BFO/PCN after four cyclic runs. This improved photocatalytic activity exhibited by the composites can be attributed to enhanced visible-light utilization and additional accessible active sites due to surface and electronic band modification of CN via P-doping and effective charge separation achieved via successful composites formation. Full article

Graphite carbon nitride (g-C₃N₄) has been employed as an emerging metal-free catalyst in heterogeneous catalysis. However, the catalyst has a poor activation property for peroxymonosulfate (PMS). In this study, Bi-Fe oxide co-doped g-C₃N₄ (Bi@Fe/CN) was synthesized for PMS activation to degrade sulfamethoxazole (SMX). In particular, Bi@Fe/CN-3 presented remarkable catalytic performance with 99.7% removal of SMX within 60 min in the PMS system. Additionally, Bi@Fe/CN-3 presented good stability and recyclability through the cycling experiments. Moreover, it was shown that free radicals (O₂^•−, ^•OH, and SO₄^•−) and non-free radicals (¹O₂) were the primary active species in the Bi@Fe/CN-3/PMS system. Bi, Fe, and surface lattice oxygen were confirmed to be the main contributors to the active species. This work elucidates the mechanism of activation of PMS by Bi@Fe/CN-3, which is beneficial to promote the application of bimetallic oxide-modified g-C₃N₄/PMS systems in wastewater treatment. Full article

Photocathodic protection (PCP) technology has gained wide attention in the field of corrosion due to its green, environmentally friendly, and sustainable characteristics, and has become a protection technology with broad development prospects in the future marine environment. By investigating recent research results, the mainstream photoanode materials are TiO₂, BiVO₄, g-C₃N₄, ZnO, In₂O₃, SrTiO₃ and other materials. Among them, TiO₂ is an ideal photoanode material for PCP because of its efficient photochemical corrosion resistance, remarkable reaction stability, and excellent photoelectric properties. However, TiO₂ itself has more drawbacks, such as limited utilization of visible light and low photogenerated electron-hole separation efficiency. These defects limit the wide application of TiO₂ in PCP. Through modification methods, the reaction efficiency can be substantially improved and the availability of TiO₂ can be increased. This paper lists the research progress of modifying TiO₂ materials using metal and non-metal doping modification, semiconductor compounding technology, and energy storage materials for application in PCP, and introduces several new types of photoanode materials. This paper suggests new ideas for the design of more efficient photoanodes. Full article

Currently, the development of nonmetallic oxygen reduction reaction (ORR) catalysts based on heteroatomic-doped carbon materials is receiving increaseing attention in the field of fuel cells. Here, we used enzymolytic lignin (EL), melamine, and thiourea as carbon, nitrogen, and sulfur sources and NH₄Cl as an activator to prepare N- and S-codoped lignin-based polyporous carbon (ELC) by one-step pyrolysis. The prepared lignin-derived biocarbon material (ELC-1-900) possessed a high specific surface area (844 m² g⁻¹), abundant mesoporous structure, and a large pore volume (0.587 cm³ g⁻¹). The XPS results showed that ELC-1-900 was successfully doped with N and S. ELC-1-900 exhibited extremely high activity and stability in alkaline media for the ORR, with a half-wave potential (E_1/2 = 0.88 V) and starting potential (E_onset = 0.98 V) superior to those of Pt/C catalysts and most non-noble-metal catalysts reported in recent studies. In addition, ELC-1-900 showed better ORR stability and methanol tolerance in alkaline media than commercial Pt/C catalysts. Full article

Carbon materials with elusive 0D, 1D, 2D, and 3D nanostructures and high surface area provide certain emerging applications in electrocatalytic and photocatalytic CO₂ utilization. Since carbon possesses high electrical conductivity, it expels the photogenerated electrons from the catalytic surface and can tune the photocatalytic activity in the visible-light region. However, the photocatalytic efficiency of pristine carbon is comparatively low due to the high recombination of photogenerated carriers. Thus, supporting carbon materials, such as graphene, CNTs (Carbon nanotubes), g-C₃N₄, MWCNs (Multiwall carbon nanotubes), conducting polymers, and its other simpler forms like activated carbon, nanofibers, nanosheets, and nanoparticles, are usually combined with other metal and non-metal nanocomposites to increase the CO₂ absorption and conversion. In addition, carbon-based materials with transition metals and organometallic complexes are also commonly used as photocatalysts for CO₂ reduction. This review focuses on developing efficient carbon-based nanomaterials for the photoconversion of CO₂ into solar fuels. It is concluded that MWCNs are one of the most used materials as supporting materials for CO₂ reduction. Due to the multi-layered morphology, multiple reflections will occur within the layers, thus enhancing light harvesting. In particular, stacked nanostructured hollow sphere morphologies can also help the metal doping from corroding. Full article

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron–hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye. Full article

In this study, three different reusable photocatalysts containing different amino acids as a source of non-metals, including L-Arginine, L-Proline, and L-Methionine, have been synthesized for the first time. Using a kinetic study and degradation efficiency test, these visible driven photocatalysts were investigated for their photocatalytic activity in removing antibiotics, including metronidazole (MNZ) and cephalexin (CEX). The morphology, structure and optical properties of the fabricated catalysts were characterized by X-ray Powder Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive Spectrometry (EDS)/mapping, Fourier-Transform Infrared Spectroscopy (FTIR), Photoluminescence Spectroscopy (PL) and UV-Vis Diffuse Reflectance Spectroscopy (DRS) analyses. Based on the results of the PL analysis, it was confirmed that doping TiO₂ with amino acids containing C, N, and S inhibited the recombination of induced electrons and holes. Among the three catalysts, L-Arginine-TiO₂ demonstrated the highest photocatalytic activity for antibiotic degradation, followed by L-Proline-TiO₂. According to the response surface methodology (RSM), the optimum operating conditions were a concentration of 50 mg/L MNZ, pH = 4, and catalyst concentration = 1.5 g/L under 90 min of irradiation time. At this condition, 99.9% of MNZ and 81% of TOC were removed. In addition, 97.2% of CEX and 75% TOC were eliminated at the optimum conditions of 1g/L catalyst concentration, 50 mg/L CEX concentration, at neutral pH, and after 120 min irradiation. L-Arginine (1 wt.%)-TiO₂ was tested for stability and reusability, and it showed that after five cycles, 10% of its performance had been lost. The role of reactive species in photocatalysis was identified and ^•OH had the most significant impacts on MNZ and CEX photodegradation. Antibiotic degradation efficiency was adversely affected by the presence of anions and humic acid, but this reduction was not significant for inorganic anions, as only 13% of degradation was lost. Full article

Developing a non-platinum catalyst that effectively catalyzes the oxygen reduction reaction (ORR) is highly significant for metal–air batteries. Metal and nitrogen co-doped carbons (M-N-Cs) have emerged as alternative candidates to platinum. In this work, dual-metal Pd/Fe-N-C electrocatalysts were synthesized by the one-step pyrolysis of phytic acid, melamine, and Pd/Fe-based salts. The Pd/Fe-N-C catalyst exhibited a good catalytic ability during the ORR process and outperformed the commercial Pt/C catalyst as regards mass activity, catalytic stability, and methanol tolerance. It was found that Pd-N_x is the active center, and the synergistic effect from the Fe component introduction endowed the Pd/Fe-N-C with an excellent catalytic performance towards the ORR. When assembled into a Zn–air battery, its specific capacity was ~775 mAh g_Zn⁻¹. Meanwhile, the peak power density could reach 3.85 W mg_Pd⁻¹, i.e., 3.4 times that of the commercial Pt/C catalyst (1.13 W mg_Pt⁻¹). This implies that the Pd/Fe-N-C catalyst has potential applications in metal–air batteries. Full article

Biomass-derived cellulose hybrid composite materials are promising for application in the field of photocatalysis due to their excellent properties. The excellent properties between biomass-derived cellulose and photocatalyst materials was induced by biocompatibility and high hydrophilicity of the cellulose components. Biomass-derived cellulose exhibited huge amount of electron-rich hydroxyl group which could promote superior interaction with the photocatalyst. Hence, the original sources and types of cellulose, synthesizing methods, and fabrication cellulose composites together with applications are reviewed in this paper. Different types of biomasses such as biochar, activated carbon (AC), cellulose, chitosan, and chitin were discussed. Cellulose is categorized as plant cellulose, bacterial cellulose, algae cellulose, and tunicate cellulose. The extraction and purification steps of cellulose were explained in detail. Next, the common photocatalyst nanomaterials including titanium dioxide (TiO₂), zinc oxide (ZnO), graphitic carbon nitride (g-C₃N₄), and graphene, were introduced based on their distinct structures, advantages, and limitations in water treatment applications. The synthesizing method of TiO₂-based photocatalyst includes hydrothermal synthesis, sol-gel synthesis, and chemical vapor deposition synthesis. Different synthesizing methods contribute toward different TiO₂ forms in terms of structural phases and surface morphology. The fabrication and performance of cellulose composite catalysts give readers a better understanding of the incorporation of cellulose in the development of sustainable and robust photocatalysts. The modifications including metal doping, non-metal doping, and metal–organic frameworks (MOFs) showed improvements on the degradation performance of cellulose composite catalysts. The information and evidence on the fabrication techniques of biomass-derived cellulose hybrid photocatalyst and its recent application in the field of water treatment were reviewed thoroughly in this review paper. Full article