Search Results (30)

This review article focuses on providing an accumulated knowledge on state-of-the-art composite polymer coating technologies that are studied for corrosion protection. A specific focus has been given to epoxy resin-based composite systems, considering their wide use due to remarkable chemical resistance, excellent adhesion to substrate, thermal stability, and mechanical strength. The addition of various functional polymers to the epoxy matrix has spurred significant advancements in the prevention of corrosion. Light has been shed on the epoxy resin composite systems that are produced by blending with functional polymers like conductive polymers, hydrophobic polymers, etc., and nanofillers. In many cases, the formation of a passive layer at the metal/polymer interface was aided by the addition of such a functional polymer and nanofiller to the epoxy matrix. As a result, corrosive ions are prevented from penetrating by the physical barrier that composite coatings provide. Comparable blends of epoxy and polyamide, epoxy and polyester, and epoxy/poly(vinyl alcohol) and epoxy/polyurethane have superior adhesion, wear, barrier, and anticorrosion properties due to the fine dispersion of nanocarbon and inorganic nanoparticles. The several strategies used to prevent metals from corroding are covered in this review article. Full article

The application of nanotechnology offers a promising solution to improve fertilizer utilization efficiency by mitigating the losses and volatilization of conventional fertilizers, contributing to sustainable agriculture. In this study, a core–shell nanocarbon-based slow-release foliar fertilizer (CN@mSiO₂-NH₂@Urea@PDA) was synthesized using nanocarbon (CN) as the core, amino-functionalized mesoporous silica (mSiO₂-NH₂) as the shell, and polydopamine (PDA) as the coating layer. BET analysis revealed a 3.5-fold and 1.9-fold reduction in material porosity after PDA encapsulation, confirming successful synthesis. The controlled-release performance was enhanced, with a 24% decrease in the release rate and a prolonged nutrient delivery duration. Hydrophobicity tests demonstrated a 20° increase in the contact angle, indicating improved adhesion. Seed germination assays validated biosafety, while field trials showed a 69.94% increase in the choy sum (Brassica rapa) yield, 21.64% higher nitrogen utilization efficiency, and 22.21% reduced nitrogen loss. The foliar application increased the plant nitrogen use efficiency by 18.37%. These findings highlight the potential of CN@mSiO₂-NH₂@Urea@PDA as an advanced foliar fertilizer, providing a strategic approach to promote nanomaterial applications in agriculture and enhance the acceptance of functional fertilizers among farmers. Full article

Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs. Copper NPs and silver NPs exhibit antibacterial and antifungal properties. So, when present in coatings, they will release metal ions with the combined effect of having bacteriostatic/bactericidal properties, preventing the growth of pathogens on surfaces covered by these nano-enhanced films. In addition, metal oxide NPs such as titanium dioxide NPs (TiO₂ NPs) and zinc oxide NPs (ZnONPs) are used as NPs in antimicrobial polymeric coatings. Under UV irradiation, these NPs show photocatalytic properties that lead to the production of reactive oxygen species (ROS) when exposed to UV radiation. After various forms of nano-carbon materials were successfully developed over the past decade, they and their derivatives from graphite/nanotubes, and composite sheets have been receiving more attention because they share an extremely large surface area, excellent mechanical strength, etc. These NPs not only show the ability to cause oxidative stress but also have the ability to release antimicrobial chemicals under control, resulting in long-lasting antibacterial action. The effectiveness and life spans of the antifouling performance of a variety of polymeric materials have been improved by adding nano-sized particles to those coatings. Full article

Rutting is a significant form of pavement distress that arises from irreversible strains accumulating along wheel paths, directly impacting pavement safety. This research investigates the effectiveness of nanocarbon-coated micronized calcium carbonate powder as a modified filler to mitigate rutting, utilizing numerical methods via finite element software. The study specifically examines the addition of 5% by weight of this modified filler to the asphalt mix. To validate the numerical results, laboratory wheel-tracking tests were conducted on samples incorporating both conventional and modified fillers. The findings reveal that the modified calcium carbonate filler enhances the asphalt’s resistance to rutting, with the 5% inclusion demonstrating a marked improvement in durability and performance. The study also underscores the necessity of characterizing the elastic and visco-plastic properties of materials through rigorous testing methods, such as elastic modulus and dynamic creep tests, to better understand their behavior under load. Numerical analysis based on linear elastic conditions was prioritized over viscous conditions to effectively compare the results of these specialized materials. The strong correlation between the numerical simulations and laboratory results reinforces the effectiveness of finite element methods in predicting pavement behavior and optimizing asphalt mixtures. Full article

Silicon (Si) as the anode material for lithium-ion batteries (LIBs) has attracted much attention due to its high theoretical specific capacity (4200 mAh/g). However, the specific capacity and cycle stability of the LIBs are reduced due to the pulverization caused by the expansion of Si coated on Cu (copper) foil during cycles. In order to solve this problem, researchers have used an ultra-thin Si deposition layer as the electrode, which improves cyclic stability and obtains high initial coulomb efficiency of LIBs. However, suitable substrate selection is crucial to fabricate an ultrathin Si deposition layer electrode with excellent performance, and a substrate with a three-dimensional porous structure is desirable to ensure the deposition of an ultrathin Si layer on the whole surface of the substrate. In this paper, the Si thin layer has been deposited on a binder-free hybrid film of carbon nanotubes (CNTs) and carbon nanocoils (CNCs) by magnetron sputtering. Compared with densely packed CNT film and flat Cu foil, the loose and porous film provides a large surface area and space for Si deposition, and Si can be deposited not only on the surface but also in the interior part of the film. The film provides a large number of channels for the diffusion and transmission of Li⁺, resulting in the rapid diffusion rate of Li⁺, which improves the effective lithium storage utilization of Si. Furthermore, the CNC itself is super elastic, and film provides an elastic skeleton for the Si deposition layer, which eases its volume expansion during charge and discharge processes. Electrochemical tests have showed that the Si/CNT–CNC film electrode has excellent performance as anode for LIBs. After 200 cycles, the Si/CNT–CNC film electrode still had possessed a specific capacity of 2500 mAh/g, a capacity retention of 92.8% and a coulomb efficiency of 99%. This paper provides an effective way to fabricate high performance Si-nanocarbon composite electrodes for LIBs. Full article

Carbon nanodots (CNDs) are nanoscale carbon-based materials with particle sizes typically less than 10 nm. They are characterized by their unique electronic, optical, and surface properties, as well as their bright and tunable fluorescence across the visible light spectrum. The process involved in synthesizing carbon nanodots is rather energy-consuming, expensive, and complicated. Motorcycle exhausts have been looked at as an environmental pollutant. In this paper, the bright side of motorcycle exhausts has been projected, whereby we have extracted carbon nanodots from motorcycle exhausts, using a simple and straightforward strategy. The nanomaterial was successfully isolated and characterized. The antimicrobial activity of the indigenously prepared nanomaterial was evaluated and coatings were prepared on glass and these nanocarbon coatings were demonstrated for their anti-biofilm activity. The results confirm the innovative and sustainable recovery of antibacterial carbon nanodots from environmental pollutants such as motorcycle exhaust. Full article

To improve the storage stability and conductivity of aluminum powder in an aqueous environment, the surface of aluminum powder was treated to form silica film by the sol–gel method, then was treated with conductive modification to introduce nanocarbon black particles so that conductive aluminum powder could be prepared to solve the application bottleneck of aluminum powder in water-borne heavy-duty anticorrosive coatings. The structure, surface morphology, and composition of the modified aluminum powder were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), and X-ray powder diffraction (XRD). The corrosion resistance and electrochemical properties were measured using a hydrogen evolution test and an 2electrochemical test. The results showed that there was a compact SiO₂ film formed on the surface of the prepared conductive aluminum powder, and the conductive filler nanocarbon black was uniformly grafted on the surface. According to the hydrogen evolution test at 100 h/50 °C, conductive aluminum powder with 5 wt% carbon black exhibited the best hydrogen evolution effect, with a hydrogen evolution amount of only 0.5 mL. The prepared conductive aluminum powder was applied to the water-borne coatings, and the storage stability test, electrochemical polarization test, and neutral salt spray test were further conducted. The water-borne coatings prepared with conductive aluminum powder still showed good performance and had no reaction after 6 months of storage. Compared with the coating containing SiO₂-modified aluminum powder, the coating exhibited better corrosion resistance. Full article

Water evaporation-driven energy harvesting is an emerging mechanism for contributing to green energy production with low cost. Herein, we developed polyacrylonitrile (PAN) nanofiber-based evaporation-driven electricity generators (PEEGs) to confirm the feasibility of utilizing electrospun PAN nanofiber mats in an evaporation-driven energy harvesting system. However, PAN nanofiber mats require a support substrate to enhance its durability and stability when it is applied to an evaporation-driven energy generator, which could have additional effects on generation performance. Accordingly, various support substrates, including fiberglass, copper, stainless mesh, and fabric screen, were applied to PEEGs and examined to understand their potential impacts on electrical generation outputs. As a result, the PAN nanofiber mats were successfully converted to a hydrophilic material for an evaporation-driven generator by dip-coating them in nanocarbon black (NCB) solution. Furthermore, specific electrokinetic performance trends were investigated and the peak electricity outputs of V_oc were recorded to be 150.8, 6.5, 2.4, and 215.9 mV, and I_sc outputs were recorded to be 143.8, 60.5, 103.8, and 121.4 μA, from PEEGs with fiberglass, copper, stainless mesh, and fabric screen substrates, respectively. Therefore, the implications of this study would provide further perspectives on the developing evaporation-induced electricity devices based on nanofiber materials. Full article

The cost of treatment of antibiotic-resistant pathogens is on the level of tens of billions of dollars at the moment. It is of special interest to reduce or solve this problem using antimicrobial coatings, especially in hospitals or other healthcare facilities. The bacteria can transfer from medical staff or contaminated surfaces to patients. In this paper, we focused our attention on the antibacterial and antibiofouling activities of two types of photodynamic polyurethane composite films doped with carbon polymerized dots (CPDs) and fullerene C₆₀. Detailed atomic force, electrostatic force and viscoelastic microscopy revealed topology, nanoelectrical and nanomechanical properties of used fillers and composites. A relationship between the electronic structure of the nanocarbon fillers and the antibacterial and antibiofouling activities of the composites was established. Thorough spectroscopic analysis of reactive oxygen species (ROS) generation was conducted for both composite films, and it was found that both of them were potent antibacterial agents against nosocomial bacteria (Klebsiela pneumoniae, Proteus mirabilis, Salmonela enterica, Enterococcus faecalis, Enterococcus epidermis and Pseudomonas aeruginosa). Antibiofouling testing of composite films indicated that the CPDs/PU composite films eradicated almost completely the biofilms of Pseudomonas aeruginosa and Staphylococcus aureus and about 50% of Escherichia coli biofilms. Full article

In the present study, a hybrid cotton fabric with an enhanced ultraviolet (UV) shielding property was developed by coating with functionally activated nanocarbon (FACN) which was grafted by polyaniline (PANI) using in situ polymerization. In light of this, Teff hay biomass was used to establish the activated nanocarbon (ANC), that was subsequently given a surface functionalization using a silane coupling agent. Using the response surface (RSM) statistical analysis, the study was optimized for the weight percent of ANC and PANI with respect to the cotton fabric that was found to offer remarkable UV protection, with an ultraviolet protection factor (UPF) of 64.563, roughly 17 times more than that of primitive cotton (UPF = 3.7). The different characterization techniques, such as UV absorption, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and thermal behavior studies were investigated. In addition, the basic textile properties on optimized hybrid material were found to be appreciably increased. The results suggested that activated FACN made from Teff hay could be an effective alternative organic source material for developing UV protective hybrid cotton fabrics. Full article

Icing is a common phenomenon in nature and has a serious impact on wind turbines. Anti-icing coatings have become a major focus of industrial applications and academic research. In this study, a hydrophobic nano-carbon coating was prepared from corn-straw-biogas residue. The characterization results of the SEM, BET, FTIR, and XRD analyses showed that the hydrophobic nano-carbon has good pore structure and crystal structure. The hydrophobic and anti-icing effects of the carbon were confirmed by contact-angle measurements and anti-icing experiments. The ice thicknesses of the hydrophobic nano-carbon-coated aluminum-alloy blade (AAB) and bakelite blade (BB) were found to decrease by 1.20 mm and 1.10 mm, respectively, compared with those without coating; their weights decreased by 2.00 g and 1.31 g, respectively. The ratios of the icing areas before and after the hydrophobic nano-carbon coating of the AAB and BB were 8.15% and 9.65%, respectively. In brief, this method is a more effective technique for creating anti-icing coatings on wind-turbine blades and other outdoor apparatus. Full article

Self-healing polymers and nanocomposites form an important class of responsive materials. These materials have the capability to reversibly heal their damage. For aerospace applications, thermosets and thermoplastic polymers have been reinforced with nanocarbon nanoparticles for self-healing of structural damage. This review comprehends the use of self-healing nanocomposites in the aerospace sector. The self-healing behavior of the nanocomposites depends on factors such as microphase separation, matrix–nanofiller interactions and inter-diffusion of polymer–nanofiller. Moreover, self-healing can be achieved through healing agents such as nanocapsules and nanocarbon nanoparticles. The mechanism of self-healing has been found to operate via physical or chemical interactions. Self-healing nanocomposites have been used to design structural components, panels, laminates, membranes, coatings, etc., to recover the damage to space materials. Future research must emphasize the design of new high-performance self-healing polymeric nanocomposites for aerospace structures. Full article

Graphene is one of the most significant carbon nanomaterials, with a one-atom-thick two-dimensional nanostructure. Like other nanocarbons, graphene has been used as a polymer reinforcement. This review explores the impact of graphene and graphene-based nanocomposites on aerospace applications. The fabrication and indispensable features of graphene-derived nanocomposites have been considered. Numerous polymers and nanocomposites have been employed for aerospace systems such as reinforced thermosetting/thermoplastic polymers and epoxy/graphene nanocomposites. Moreover, graphene-modified carbon-fiber-based composites have been discussed for the space sector. Aerospace nanocomposites with graphene have been investigated for superior processability, structural features, morphology, heat stability, mechanical properties, flame resistance, electrical/thermal conductivity, radiation protection, and adhesion applications. Subsequently, epoxy and graphene-derived nanocomposites have been explored for heat/mechanically stable aerospace engineering structures, radiation-shielding materials, adhesives, coatings, etc. Full article

Polymeric coatings have been widely selected for the corrosion resistance of metallic surfaces. Both the conducting and non-conducting polymers have been applied for corrosion confrontation. The conducting polymers usually possess high electrical conductivity and corrosion resistance features. On the other hand, non-conducting hydrophobic polymers have also been used to avert the metal erosion. To improve the corrosion inhibition performance of the polymer coatings, nanocarbon nanofillers have been used as reinforcement. Graphene, especially, has gained an important position in the research on the corrosion-protecting nanocomposite coatings. Here, graphene dispersion and matrix–nanofiller interactions may significantly improve the anti-corrosion performance to protect the underlying metals. The graphene nanofiller may form an interconnecting percolation network in the polymers to support their electrical conductivity and thus their corrosion confrontation characteristics. Further research on the polymer/graphene nanocomposite and its anti-corrosion mechanism may lead to great advancements in this field. Full article

Nanocomposite hydrogels have attracted researchers’ attention in recent years to achieve superior performances in a variety of materials applications. In this work, we describe the outcome of three different strategies to combine a self-assembling tripeptide and carbon nano-onions (CNOs), through covalent and non-covalent approaches, into supramolecular and nanostructured hydrogels. Importantly, the tripeptide coated the nano-onions and extended their aqueous dispersions’ stability by several hours. Furthermore, CNOs could be loaded in the tripeptide hydrogels at the highest level ever reported for nanocarbons, indicating high compatibility between the components. The materials were formed in phosphate-buffered solutions, thus paving the way for biological applications, and were characterized by several spectroscopic, microscopic, thermogravimetric, and rheological techniques. In vitro experiments demonstrated excellent cytocompatibility. Full article