Search Results (10)

This study investigates the potential of bioaugmentation with Bacillus species to enhance wastewater treatment and develop a bacterial–CaCO₃ system for self-healing cement applications. Utilizing microbiologically induced calcium carbonate precipitation (MICP), this study evaluates the dual functionality of Bacillus licheniformis and B. muralis strains. For wastewater treatment, the bioaugmentation process achieved significant pollutant reductions, including a 99.52% decrease in biochemical oxygen demand (BOD₅), a 92.13% reduction in chemical oxygen demand (COD), and a substantial removal of heavy metals and nutrients. This process also produced high concentrations of CaCO₃ precipitate enriched with viable bacterial cells, demonstrating an eco-friendly approach to improving water quality. For self-healing cement applications, bioaugmented CaCO₃ crystals were coated with nutrient and sodium silicate layers to form a bacterial–CaCO₃ coupled system. This system demonstrated a 92% recovery in compressive strength after 180 days, highlighting its ability to autonomously repair microcracks in cement-based materials. The layered encapsulation strategy ensured bacterial viability and a controlled activation mechanism, offering a scalable and sustainable solution for infrastructure resilience. This dual-function approach addresses critical environmental and construction challenges by linking efficient wastewater treatment with innovative self-healing material development, contributing to global sustainability and circular economy goals. Full article

This research focuses on the potential for microbial treatment to stabilize compacted soils, which are often utilized in earthwork projects. A silt–clay sand was used to describe a particular kind of soil. The suggested remedy makes use of the soil’s naturally occurring urea and Ca²⁺, as well as microorganisms introduced to the compaction water. Two alternative initial water-content types were examined: those on the dry side and those close to the ideal Proctor conditions. Bacillaceae microorganisms were used to induce microbial CaCO₃ precipitation and improve the hydraulic and mechanical properties of the compacted soil. The samples were biotreated and immediately compacted, so that the precipitation of calcium carbonate during the curing process took place in the contact areas between the particles (biocementation) and in the pore space (bioclogging). A set of techniques were used to study the ageing effects, such as the water-retention curve by dew-points psychrometer, mercury porosimetry intrusion, permeability, ultrasonic pulse velocity, resonant column, and unconfined and tensile-compression tests. During the ageing, it was observed that the bacterial activity consumed water for the hydrolysis of urea and other intermediate reactions to precipitate CaCO₃. This process resulted in a retraction of the microstructure and a change in the macrostructure. The bioclogging phenomenon was more evident in the soil microstructure, while the biocementation process was easier to observe in the macrostructure. The suction’s effects on the soil stiffness were studied in detail, and a significant increase was detected. Despite these water-content losses, which caused soil stiffening by increasing the suction, it was still feasible to identify the gradual rise in small-strain stiffness throughout incubation. The unconfined and tensile-compression tests showed a similar progressive increase in terms of peak compressive and peak splitting strength during the incubation. These results are of interest when microbiological treatments are applied in soils to produce cementitious materials, with the present investigation demonstrating a complete study of their geotechnical behaviour. Full article

Copper ore processing generates a large amount of copper slag, which has properties that are similar to fine aggregate. Copper slag has a promising future in the construction industry as an alternative to fine aggregate. Up to 50% of fine aggregate substitutions have been successful. The performance of copper slag concrete could be improved by microbiologically induced calcium carbonate precipitation. The impact of micro-organisms on the mechanical properties and flexural behaviour of copper slag concrete was investigated in this study. Five concrete mixtures were created by replacing varying amounts of fine aggregate with copper slag, ranging from 0% to 100%. M30 grade concrete was used, and 1% to 2% of the bacterium Bacillus subtilis by weight of cement was added during the concrete casting procedure. Specimens of different shapes, such as cubes, cylinders, and prisms, were cast and examined at 7, 14, and 28 days. When treated with micro-organisms, the test results revealed that replacing 50% to 75% of the sand with copper slag produced concrete with superior mechanical properties and a greater density. With the optimal ratio of copper slag to micro-organisms, a suitable RCC beam was formed. Load–deflection patterns of bacterial copper slag concrete were used to investigate beam flexural behaviour, and the results were compared using ABAQUS modelling. Microbiologically induced calcium carbonate precipitation can alter regular copper slag concrete, resulting in enhanced concrete performance. Full article

The main focus of this research was the bio-stimulated healing of cracks in lime mortar samples (historical and newly designed). The investigation started from comprehensive characterisation of historical mortars, while in the next stage a compatible conservation mortar was designed and characterised, with special attention given to the contact zone formation between original and conservation mortars. The next step was the design of a bio-stimulating crack-sealing agent, a two-component liquid system: bacteria culture Sporosarcina pasteurii DSM 33 and nutrients. Both historical and conservation mortar samples were used in order to study their potentials for bio-stimulated surface-crack repair. The experiment lasted for 150 days, allowing the ureolytic bacteria Sporosarcina pasteurii DSM 33 to induce the precipitation of calcium carbonate into cracks and heal the damaged surface of the tested materials. The healing phenomenon was continuously monitored during a period of 150 days. Special attention was given to the evaluation of the morphology, chemical and structural characteristics of the deposits created in/on the surface cracks, monitored by optical microscopy, SEM, XRF and XRD analyses. The obtained results present valuable input for the application of the developed system in real environmental conditions as a solution for the future sustainable architectural conservation of traditionally prepared mortars. Full article

The civil research community has been attracted to self-healing bacterial-based concrete as a potential solution in the economy 4.0 era. This concept provides more sustainable material with a longer lifetime due to the reduction of crack appearance and the need for anthropogenic impact. Regardless of the achievements in this field, the gap in the understanding of the importance of the bacterial role in self-healing concrete remains. Therefore, understanding the bacterial life cycle in the self-healing effect of cement-based materials and selecting the most important relationship between bacterial contribution, self-healing effect, and material characteristics through the process of microbiologically (bacterially) induced carbonate precipitation is just the initial phase for potential applications in real environmental conditions. The concept of this study offers the possibility to recognize the importance of the bacterial life cycle in terms of application in extreme conditions of cement-based materials and maintaining bacterial roles during the self-healing effect. Full article

The development of cracks, owing to a relatively lower tensile strength of concrete, diverse loading, and environmental factors driving the deterioration of structures, is an inescapable key concern for engineers. Reparation and maintenance operations are thus extremely important to prevent cracks from spreading and mitigating the lifetime of structures. However, ease of access to the cracked zone may be challenging, and it also needs funds and manual power. Hence, autonomous sealing of cracks employing microorganisms into the concrete sans manual intervention is a promising solution to the dilemma of the sustainable improvement of concrete. ‘Ureolytic bacteria’, key organism species in rumen-producing ‘urease’ enzymes such as Bacillus pasteurii or subtilis—when induced—are capable of producing calcium carbonate precipitations into the concrete. As their cell wall is anionic, CaCO₃ accumulation on their surface is extensive, and the whole cell, therefore, becomes crystalline and ultimately plugs pores and cracks. This natural induction technique is an environmentally friendly method that researchers are studying intensively. This manuscript reviews the application process of bacterial healing to manufacture autonomous self-healing bacterial concrete. Additionally, it provides a brief review of diverse attributes of this novel concrete which demonstrate the variations with the auto-addition of different bacteria, along with an evaluation of crack healing as a result of the addition of these bacteria directly into concrete or after encapsulation in a protective shell. Comparative assessment techniques for autonomous, bio-based self-healing are also discussed, accompanied by progress, potential, modes of application of this technique, and its resultant benefits in the context of strength and durability. Imperatives for quantitative sustainability assessment and industrial adoption are identified, along with the sealing of artificially cracked cement mortar with sand as a filling material in given spaces, as well as urea and CaCl₂ medium treatment with Bacillus pasteurii and Sporosarcina bacteria. The assessment of the impact on the compressive strength and rigidity of cement mortar cubes after the addition of bacteria into the mix is also considered. Scanning electron microscope (SEM) images on the function of bacteria in mineral precipitation that is microbiologically induced are also reviewed. Lastly, future research scope and present gaps are recognised and discussed. Full article

The rapid development of the construction sector has led to massive use of raw construction materials, which are at risk of exhaustion. The problem is aggravated by the high demand for cement as binding powder and the mass production of clay bricks for construction purposes. This scenario has led to high energy consumption and carbon emissions in their production. In this regard, bio-cementation is considered a green solution to building construction, because this technology is environmentally friendly and capable of reducing carbon emissions, thus slowing the global warming rate. Most of the previously published articles have focused on microbiologically induced calcium carbonate precipitation (MICP), with the mechanism of bio-cementation related to the occurrence of urea hydrolysis as a result of the urease enzymatic activity by the microbes that yielded ammonium and carbonate ions. These ions would then react with calcium ions under favorable conditions to precipitate calcium carbonate. MICP was investigated for crack repair and the surface treatment of various types of construction materials. Research on MICP for the production of binders in construction materials has become a recent trend in construction engineering. With the development of cutting edge MICP research, it is beneficial for this article to review the recent trend of MICP in construction engineering, so that a comprehensive understanding on microbial utilization for bio-cementation can be achieved. Full article

Microbiologically induced carbonate precipitation (MICP) is a well-known biogeochemical process that allows the formation of calcium carbonate deposits in the extracellular environment. The high concentration of carbonate and calcium ions on the bacterial surface, which serves as nucleation sites, promotes the calcium carbonate precipitation filling and binding deteriorated materials. Historic buildings and artwork, especially those present in open sites, are susceptible to enhanced weathering resulting from environmental agents, interaction with physical-chemical pollutants, and living organisms, among others. In this work, some published variations of a novel and ecological surface treatment of heritage structures based on MICP are presented and compared. This method has shown to be successful as a restoration, consolidation, and conservation tool for improvement of mechanical properties and prevention of unwanted gas and fluid migration from historical materials. The treatment has revealed best results on porous media matrixes; nevertheless, it can also be applied on soil, marble, concrete, clay, rocks, and limestone. MICP is proposed as a potentially safe and powerful procedure for efficient conservation of worldwide heritage structures. Full article

At present, the commonly used repair materials for concrete cracks mainly include epoxy systems and acrylic resins, which are all environmentally unfriendly materials, and the difference in drying shrinkage and thermal expansion often causes delamination or cracking between the original concrete matrix and the repair material. This study aimed to explore the feasibility of using microbial techniques to repair concrete cracks. The bacteria used were environmentally friendly Bacillus pasteurii. In particular, the use of lightweight aggregates as bacterial carriers in concrete can increase the chance of bacterial survival. Once the external environment meets the growth conditions of the bacteria, the vitality of the strain can be restored. Such a system can greatly improve the feasibility and success rate of bacterial mineralization in concrete. The test project included the microscopic testing of concrete crack repair, mainly to understand the crack repair effect of lightweight aggregate concrete with implanted bacterial strains, and an XRD test to confirm that the repair material was produced by the bacteria. The results show that the implanted bacterial strains can undergo Microbiologically Induced Calcium Carbonate Precipitation (MICP) and can effectively fill the cracks caused by external concrete forces by calcium carbonate deposition. According to the results on the crack profile and crack thickness, the calcium carbonate precipitate produced by the action of Bacillus pasteurii is formed by the interface between the aggregate and the cement paste, and it spreads over the entire fracture surface and then accumulates to a certain thickness to form a crack repairing effect. The analysis results of the XRD test also clearly confirm that the white crystal formed in the concrete crack is calcium carbonate. From the above test results, it is indeed feasible to use Bacillus pasteurii in the self-healing of concrete cracks. Full article

In this paper, we studied the crack-repair by spraying bacteria-based liquid around the cracks in concrete. To enhance the repair efficiency and speed up the repair process, the transposon mutagenesis method was employed to modify the genes of Bacillus halodurans and create a mutant bacterial strain with higher efficiency of calcium carbonate productivity by catalyzing the combination of carbonate and calcium ion. The efficiency of crack-repairing in concrete by spraying two kinds of bacterial liquid was evaluated via image analysis, X-ray computed tomography (X-CT) scanning technology and the sorptivity test. The results show that the crack-repair efficiency was enhanced very evidently by spraying genetically modified bacterial-liquid as no microbiologically induced calcite precipitation (MICP) was found within the cracks for concrete samples sprayed using wild type bacterial-liquid. In addition, the crack-repair process was also shortened significantly in the case of genetically modified bacteria. Full article