Search Results (20)

Heavy metal mercury is one of the most significant and toxic environmental contaminants. Its inorganic form (Hg²⁺) and organic form (organic mercury, OrHg) can cause irreversible harm to human health and the ecological environment, and the latter is particularly prone to bioaccumulation and bioamplification in the food chain. Therefore, there is an urgent need for a rapid, reliable and specific detection of Hg²⁺ and OrHg to evaluate the potential risk for human health. Here, a novel label-free fluorescent sensing platform based on ssDNA aptamer (A_A-T7)-templated AuNCs was established for sensitive recognition and specific detection of Hg²⁺ and OrHg. In the presence of OrHg, the fluorescence of pure A_A-T7-templated AuNCs was visibly enhanced through forming Ag/AuNCs based on Ag⁰-doped AIEE effect. However, they were obviously quenched because of generating non-fluorescent Au/Ag/Hg ANPs via metallophilic interactions among Au³⁺, Ag⁺, and Hg²⁺ (5d¹⁰-4d¹⁰-5d¹⁰) when only Hg²⁺ existed. This fluorescent sensing platform could detect as low as 20.0 nM (4.0 ng Hg/g) and has a good linear detection range, with target concentrations ranging from 0.25 μM to 2.00 μM, recoveries of 98.0–108.0%, and RSD ≤ 5.0%. Low-toxic A_A-T7-templated AuNCs could be used for cytotoxicity analysis and intracellular fluorescent imaging. The method has been successfully applied to the determination of Hg²⁺ and OrHg in tap water, seawater and dried golden pomfret fish muscle samples, demonstrating promising prospects for the assay of mercury species in environmental samples and aquatic products to ensure human health and food safety. Full article

The effect of Ag₂Se content on the structure and mechanical properties of (1−x) (0.73GeSe₂-0.27Sb₂Se₃)-xAg₂Se glasses is analyzed. The glass structure is studied using XRD and NMR analyses. A particular consideration relates to a multiple increase in plasticity with increasing silver selenide content in chalcogenide glasses. The observed effects are attributed to the formation of silver–silver metallophilic interactions. Full article

Group 11 metals form with pyrazolate ligand complexes with a general formula of [MPz]_n. The value of “n” varies depending on the type of substituent in the ligand and the metal atom. Copper(I) and silver(I) ions mainly form cyclic di-, tri-, and tetra-nuclear complexes or polymeric structures. Cyclic trinuclear d¹⁰ metal pyrazolates [MPz^m]₃ (M = Cu(I) and Ag(I); Pz = substituted pyrazolate ligand) are of particular interest because their planar structure allows them to form supramolecular aggregates via noncovalent metal–metal, metal–π, and metal–electron donor interactions. Designing complexes based on these interactions has been a focus of research for the last two decades. The ability of cyclic trinuclear copper(I) and silver(I) pyrazolates to form coordination and supramolecular structures determines their properties and potential applications in catalysis, gas sensing, molecular recognition, and photoluminescence. In this review, we discuss noncovalent interactions between cyclic trinuclear silver(I) and copper(I) complexes with various types of ligands. Full article

The tuning of the luminescent properties of Pt^II complexes for possible use in organic light-emitting diodes (OLEDs) and sensing applications is commonly achieved by altering the electronic properties of the ligands. Our group recently demonstrated that the trifluoropropynyl ligand is strongly electron-withdrawing and possibly useful for blueshifting emission. Herein, we report the synthesis of two complexes of this trifluoropropynyl ligand, namely PtLC₂CF₃ and PtL^FC₂CF₃ (L = 1,3-di(2-pyridyl)benzene; L^F = 4,6-difluoro-1,3-di(2-pyridyl)benzene). The PtLC₂CF₃ complex crystallized in the monoclinic space group P2₁/n with Z = 4. The PtL^FC₂CF₃ complex crystalized in the triclinic space group P-1 with Z = 2. Changing the tridentate ligand from L to L^F resulted in a change in the packing structure, with the latter showing a metallophilic interaction (Pt-Pt distance = 3.3341(3) Å). The solution photophysics of the trifluoropropynyl complexes is compared with that of the corresponding Cl complexes, PtLCl and PtL^FCl. Replacement of the chloro ligand with the trifluoropropynyl ligand blueshifted the monomer emission by less than 5 nm but blueshifted the excimer emission peaks by 15–20 nm. The complexes of the trifluoropropynyl ligand also favor the excimer emission more than the complexes of the chloro ligand. The excimer emission is quenched by dissolved oxygen significantly more than the corresponding monomer emission. The excimer emission and monomer emission are well separated, and the ratio of monomer to excimer emission is strongly dependent on oxygen concentration. Full article

We synthesized a series of five novel Mn–salen-based compounds (1a–1c, 2a, 2b) through the reaction between precursor chloride complexes and potassium silver/gold dicyanide. The prepared compounds were structurally and magnetically characterized. Our findings revealed that all the Mn(III) central atoms exhibited an axially elongated coordination polyhedron, leading to the observation of axial magnetic anisotropy as indicated by the negative axial magnetic parameter D, which was determined through fitting the experimental magnetic data and supported by theoretical CASSCF/NEVPT2 calculations. Furthermore, we observed magnetic-exchange interactions only in compounds with a special supramolecular topology involving O–H···O hydrogen-bonded dimers. In these cases, the weak magnetic exchange (J/cm⁻¹ = −0.58(2) in 1b and −0.73(7) in 2b) was mediated by the O–H···O hydrogen bonds. These findings were further supported by BS–DFT calculations, which predicted weak antiferromagnetic exchanges in these complexes and ruled out exchange interactions mediated by diamagnetic cyanido metallo–complex bridges. Additionally, we investigated the observed Ag···π (1b) and Au···Au (2b) interactions using QT–AIM calculations, confirming their non-covalent nature. We compared these results with previously reported Mn–salen-based compounds with metallophilic interactions arising from the presence of the [Ag/Au(CN)₂]⁻ bridging units. Full article

A series of four Werner-type complexes of Pd(II) and Pt(II) with planar, isomeric conjugated aromatic naphtoquinone oximes were synthesized for the first time. These ligands were 1-oxime-2-naphtoquinone (HL¹) and 2-oxime-1-napthoquinone (HL²). Compounds were characterized using thermal analysis, spectroscopic methods, and X-ray analysis. TG/DSC data were collected for pure starting organic ligands, their complexes, and indicated vigorous exothermic decomposition with at ~155 °C for starting HL and ~350 °C for transition metal complexes. Crystal structures for two Pt compounds with 2-oxime-1-quinone were determined and revealed the formation of the cis-geometry complexes and incorporation of molecules of stoichiometric solvents in the lattice: acetonitrile and nitrobenzene. Both solvents of crystallization displayed attractive interactions between their C-H groups and the oxygen atoms of the nitroso groups in complexes, leading to short distances in those fragments. Despite the presence of solvents of inclusion, the overall structure motifs in both compounds represent 1D columnar coordination polymer, in which the PtL₂ units are held together via metallophilic interactions, thereby forming ‘Pt-wires’. The Hirshfield surface analysis was performed for both crystallographically characterized complexes. The results showed intermolecular π–π stacking and Pt–Pt interactions among the planar units of both complexes. In addition, the analysis also verified the presence of hydrogen bonding interactions between the platinum unit and solvent molecules. Solid bulk powdery samples of both PtL¹₂ and PtL²₂ demonstrated pronounced photoluminescence in the near infrared region of spectrum at ~980 nm, being excited in the range of 750–800 nm. The NIR emission was observed only for Pt-complexes and not for pure starting organic ligands or Pd-complexes. Additionally, synthesized Pt-naphtoquinone oximes do not show luminescence in solutions, which suggests the importance of a 1D ‘metal wire’ structure for this process. Full article

Non-covalent interactions are one of the key topics in modern chemical science. These inter- and intramolecular weak interactions (e.g., hydrogen, halogen, and chalcogen bonds, stacking interactions and metallophilic contacts) have a significant effect on the properties of polymers. In this Special Issue, “Non-covalent interactions in polymers”, we tried to collect fundamental and applied research manuscripts (original research articles and comprehensive review papers) focused on non-covalent interactions in polymer chemistry and related fields. The scope of the Special Issue is very broad: we welcome all the contributions that deal with the synthesis, structure, functionality and properties of polymer systems involving non-covalent interactions. Full article

Sensors for the detection of heavy metal ions in water are in high demand due to the danger they pose to both the environment and human health. Among their possible detection approaches, modulation of the photoluminescence of gold nanoclusters (AuNCs) is gaining wide interest as an alternative to classical analytical methods based on complex and high-cost instrumentation. In the present work, luminescent oxidized AuNCs emitting in both ultraviolet (UV) and visible (blue) regions were synthesized by pulsed laser ablation of a gold target in NaOH aqueous solution, followed by different bleaching processes. High-resolution electron microscopy and energy-dispersive X-ray scattering confirmed the presence of oxygen and gold in the transparent photoluminescent clusters, with an average diameter of about 3 nm. The potentialities of the bleached AuNCs colloidal dispersions for the detection of heavy metal ions were studied by evaluating the variation in photoluminescence in the presence of Cd²⁺, Pb²⁺, Hg²⁺ and CH₃Hg⁺ ions. Different responses were observed in the UV and visible (blue) spectral regions. The intensity of blue emission decreased (no more than 10%) and saturated at concentrations higher than 20 ppb for all the heavy metal ions tested. In contrast, the UV band emission was remarkably affected in the presence of Hg²⁺ ions, thus leading to signal variations for concentrations well beyond 20 ppb (the concentration at which saturation occurs for other ions). The limit of detection for Hg²⁺ is about 3 ppb (15 nmol/L), and the photoluminescence intensity diminishes linearly by about 75% up to 600 ppb. The results are interpreted based on the ligand-free interaction, i.e., the metallophilic bonding formation of Hg²⁺ and Au⁺ oxide present on the surface of the UV-emitting nanoclusters. Full article

Non-covalent interactions are one of the key topics in coordination and organometallic chemistry. Examples of such weak interactions are hydrogen, halogen, and chalcogen bonds, stacking interactions, metallophilic contacts, etc. Non-covalent interactions play an important role in materials science, catalysis, and medicinal chemistry. The aim of this Special Issue of International Journal of Molecular Sciences, entitled “Non-Covalent Interactions in Coordination and Organometallic Chemistry”, is to cover the most recent progress in the rapidly growing field of non-covalent interactions in coordination and organometallic chemistry. Both experimental and theoretical studies, fundamental and applied research and any types of manuscripts are welcome for consideration. Full article

The results of my research in the fields of theoretical studies and computer modeling of supramolecular chemical systems were presented. The main attention was focused on theoretical studies in the following topics: cycloaddition and nucleophilic addition reactions involving substrates with multiple CC and CN bonds, their mechanisms, driving forces, kinetics and thermodynamics; the consideration of the catalysis of hydrocarbons oxidation processes and their conversion to alcohols, ethers, aldehydes, ketones and carboxylic acids; investigations of various unusual types of non-covalent interactions (from quite trivial hydrogen bonds to more exotic σ-hole, π-hole and metallophilic interactions) in organic, organometallic and coordination compounds. Some fundamental issues of supramolecular chemical systems were also discussed (e.g., structure and properties of chemical compounds and their supramolecular associates; conformational transitions and rotation barriers of functional groups; nature of chemical bonds; orbital and charge factors; photophysical properties). Full article

The coordination behavior of tris(2-pyridyl)arsine (Py₃As) has been studied for the first time on the example of the reactions with CuI, CuBr and AgClO₄. When treated with CuI in CH₂Cl₂ medium, Py₃As unexpectedly affords the scorpionate complex [Cu(Py₃As)I]∙CH₂Cl₂ only, while this reaction in MeCN selectively leads to the dimer [Cu₂(Py₃As)₂I₂]. At the same time, the interaction of CuBr with Py₃As exclusively gives the dimer [Cu₂(Py₃As)₂Br₂]. It is interesting to note that the scorpionate [Cu(Py₃As)I]∙CH₂Cl₂, upon fuming with a MeCN vapor (r.t., 1 h), undergoes quantitative dimerization into the dimer [Cu₂(Py₃As)₂I₂]. The reaction of Py₃As with AgClO₄ produces complex [Ag@Ag₄(Py₃As)₄](CIO₄)₅ featuring a Ag-centered Ag₄ tetrahedral kernel. At ambient temperature, the obtained Cu(I) complexes exhibit an unusually short-lived photoluminescence, which can be tentatively assigned to the thermally activated delayed fluorescence of (M + X) LCT type (M = Cu, L = Py₃As; X = halogen). For the title Ag(I) complexes, QTAIM calculations reveal the pronounced argentophilic interactions for all short Ag∙∙∙Ag contacts (3.209–3.313 Å). Full article

The self-assembly of discrete cyanometallates has attracted significant interest due to the potential of these materials to undergo soft metallophilic interactions as well as their optical properties. Diblock copolypeptide amphiphiles have also been investigated concerning their capacity for self-assembly into morphologies such as nanostructures. The present work combined these two concepts by examining supramolecular hybrids comprising cyanometallates with diblock copolypeptide amphiphiles in aqueous solutions. Discrete cyanometallates such as [Au(CN)₂]⁻, [Ag(CN)₂]⁻, and [Pt(CN)₄]²⁻ dispersed at the molecular level in water cannot interact with each other at low concentrations. However, the results of this work demonstrate that the addition of diblock copolypeptide amphiphiles such as poly-(L-lysine)-block-(L-cysteine) (Lys_m-b-Cys_n) to solutions of these complexes induces the supramolecular assembly of the discrete cyanometallates, resulting in photoluminescence originating from multinuclear complexes with metal-metal interactions. Electron microscopy images confirmed the formation of nanostructures of several hundred nanometers in size that grew to form advanced nanoarchitectures, including those resembling the original nanostructures. This concept of combining diblock copolypeptide amphiphiles with discrete cyanometallates allows the design of flexible and functional supramolecular hybrid systems in water. Full article

Studies on self-assembly of metal nanoclusters (MNCs) are an emerging field of research owing to their significant optical properties and potential applications in many areas. Fabricating the desired self-assembly structure for specific implementation has always been challenging in nanotechnology. The building blocks organize themselves into a hierarchical structure with a high order of directional control in the self-assembly process. An overview of the recent achievements in the self-assembly chemistry of MNCs is summarized in this review article. Here, we investigate the underlying mechanism for the self-assembly structures, and analysis reveals that van der Waals forces, electrostatic interaction, metallophilic interaction, and amphiphilicity are the crucial parameters. In addition, we discuss the principles of template-mediated interaction and the effect of external stimuli on assembly formation in detail. We also focus on the structural correlation of the assemblies with their photophysical properties. A deep perception of the self-assembly mechanism and the degree of interactions on the excited state dynamics is provided for the future synthesis of customizable MNCs with promising applications. Full article

This editorial is dedicated to announcing the Special Issue “Theoretical investigation on non-covalent interactions” of Crystals. The Special Issue covers the most recent progress in the rapidly growing fields of data science, artificial intelligence, and quantum and computational chemistry in topics relevant to the problem of theoretical investigation on non-covalent interactions (including, but not limited to, hydrogen, halogen, chalcogen, pnictogen, tetrel, and semi-coordination bonds; agosic and anagosic interactions; stacking, anion-/cation–π interactions; metallophilic interactions, etc.). The main successes of my colleagues and I in the field of fundamental theoretical studies of non-covalent interactions in various chemical compounds over the past year are briefly highlighted. Full article

The interaction of biofilms with metallic surfaces produces two biologically induced degradation processes of materials: microbial induced corrosion and bioleaching. Both phenomena affect most metallic materials, but in the case of noble metals such as gold, which is inert to corrosion, metallophilic bacteria can cause its direct or in direct dissolution. When this process is controlled, it can be used for hydrometallurgical applications, such as the recovery of precious metals from electronic waste. However, the presence of unwanted bioleaching-producing bacteria can be detrimental to metallic materials in specific environments. In this work, we propose the use of single-layer graphene as a protective coating to reduce Au bioleaching by Cupriavidus metallidurans, a strain adapted to metal contaminated environments and capable of dissolving Au. By means of Scanning Tunneling Microscopy, we demonstrate that graphene coatings are an effective barrier to prevent the complex interactions responsible for Au dissolution. This behavior can be understood in terms of graphene pore size, which creates an impermeable barrier that prevents the pass of Au-complexing ligands produced by C.metallidurans through graphene coating. In addition, changes in surface energy and electrostatic interaction are presumably reducing bacterial adhesion to graphene-coated Au surfaces. Our findings provide a novel approach to reduce the deterioration of metallic materials in devices in environments where biofilms have been found to cause unwanted bioleaching. Full article