Search Results (109)

Transmembrane protein 43 (TMEM43 or LUMA) encodes a highly conserved protein found in the nuclear and endoplasmic reticulum membranes of many cell types and the intercalated discs and adherens junctions of cardiac myocytes. TMEM43 is involved in facilitating intra/extracellular signal transduction to the nucleus via the linker of the nucleoskeleton and cytoskeleton complex. Genetic mutations may result in reduced TMEM43 expression and altered TMEM43 protein cellular localization, resulting in impaired cell polarization, intracellular force transmission, and cell–cell connections. The p.S358L mutation causes arrhythmogenic right ventricular cardiomyopathy type-5 and is associated with increased absorption of lipids, fatty acids, and cholesterol in the mouse small intestine, which may promote fibro-fatty replacement of cardiac myocytes. Mutations (p.E85K and p.I91V) have been identified in patients with Emery–Dreifuss Muscular Dystrophy-related myopathies. Other mutations also lead to auditory neuropathy spectrum disorder-associated hearing loss and have a negative association with cancer progression and tumor cell survival. This review explores the pathogenesis of TMEM43 mutation-associated diseases in humans, highlighting animal and in vitro studies that describe the molecular details of disease processes and clinical, histologic, and molecular manifestations. Additionally, we discuss TMEM43 expression-related conditions and how each disease may progress to severe and life-threatening states. Full article

Nanostructured bimetallic IrSn composites deposited on the natural aluminosilicate montmorillonite were synthesized and evaluated as anode electrocatalysts for polymer electrolyte membrane electrolysis cells (PEMECs). The test series prepared via the sol–gel method consisted of samples with 30 wt. % total metal content and varying Ir:Sn ratio. The performed X-ray diffraction analysis and high-resolution transmission electron icroscopy registered very fine nanostructure of the composites with metal particles size of 2–3 nm homogeneously dispersed on the support surface and also intercalated in the basal space of its layered structure. The electrochemical behavior was investigated by cyclic voltammetry and steady-state polarization techniques. The initial screening was performed in 0.5 M H₂SO₄. Then, the catalysts were integrated as anodes in membrane electrode assemblies (MEAs) and tested in a custom-made PEMEC. The electrochemical tests revealed that the catalysts with Ir:Sn ratio 15:15 and 18:12 wt. % demonstrated high efficiency toward the oxygen evolution reaction during repetitive potential cycling and sustainable performance with current density in the range 140–120 mA cm⁻² at 1.6 V vs. RHE during long-term stability tests. The results obtained give credence to the studied IrSn/MMT nanocomposites to be considered promising, cost-efficient catalysts for the oxygen evolution reaction (OER). Full article

Multiciliated cells generate fluid flow along epithelial surfaces, and defects in their development or function cause primary ciliary dyskinesia. The fluid flow is generated by the coordinated beating of motile cilia, which are microtubule-based organelles. The base of each cilium, the basal body, is anchored to the apical cell membrane and surrounded by a dense apical cytoskeleton of actin, microtubules, and intermediate filaments. Several cell adhesion proteins play a role in the connection of the basal body to the apical cytoskeleton. Here, we show that the desmosomal protein plakophilin3, a member of the armadillo family of proteins, localizes to the striated rootlet in Xenopus laevis multiciliated cells. Knockdown of plakophilin 3 leads to significant defects in cilia-generated fluid flow and basal body docking. These defects are cell-autonomous and independent of cell intercalation and gross changes in the actin cytoskeleton. These findings suggest a crucial role for PKP3 in basal body apical migration and docking in multiciliated cells, highlighting a novel connection between desmosomal proteins and ciliary function. Full article

Mammalian renal intercalated cells are known for their role in acid secretion and maintaining acid–base balance. Herein, we discuss the theoretical reasons behind their development based on published data, focusing on the unique characteristics of renal intercalated cell biology that distinguish them from other mammalian cell types, while simultaneously attempting to explain the persistence of cells similar to intercalated cells throughout evolution. In addition, we traced these characteristics phylogenetically back to the simplest organisms. Intercalated cells have several functions and attributes. First, they contribute to kidney defense mechanisms in response to both infectious and non-infectious kidney damage. Second, intercalated cells are energized by V-ATPases in a manner similar to that of protozoa. Third, they possess T-antigens, which are commonly found in embryonic and cancer cells and which confer invasive abilities to these cells. Fourth, their plasticity enables the regeneration of other epithelial cells. These observations indicate that the origins of renal intercalated cells may be traceable back to amoeboid cells that originated from an evolutionary lineage including protists, or even to the last eukaryote common ancestor. The theoretical framework presented herein supports two predictions: first, that sponge amoebocytes possess membrane V-ATPase and are sensitive to bafilomycin, but not to ouabain; and second, that sponge amoebocytes—along with cells from diploblasts (such as Xenacoelomorpha), cnidarians, worms, fish and mollusk ionocytes, and the entire cell lineage containing V-ATPase, carbonic anhydrase, and anion exchangers (HCO₃⁻/Cl⁻)—have innate immunity, cellular dedifferentiation, and regeneration capabilities. Full article

Despite their inherently lower energy density than lithium-ion batteries (LIBs), aqueous zinc metal batteries (AZMBs) have recently attracted interest as rechargeable energy storage devices due to their low cost and high operational and environmental safety. They are composed of metallic zinc as the anode, an aqueous zinc salt electrolyte and a cathode capable of (de)intercalating Zn²⁺ ions upon its (oxidation) reduction reaction. In this work, we studied a hybrid AZMB in which a dual-ion electrolyte containing both Zn²⁺ and Li⁺ ions was used in conjunction with a Li⁺ ion intercalation cathode, i.e., LiFePO₄ (LFP), one of the most common, reliable, and cheap cathodes for LIBs. In this study, we present evidence that, thanks to its insolubility in water, ethyl cellulose (EC) can be effectively utilized as a binder for cathode membranes in AZMBs. Furthermore, its solubility in alcohol provides a significant advantage in avoiding the use of toxic solvents, contributing to a safer and more environmentally friendly approach to the formulation process. Full article

This study investigates the efficient and recyclable use of polymer-based membrane materials in wastewater treatment, focusing on calcium-based montmorillonite (Ca-MMT), pyrrole (Py), and polypropylene (PP). Through sodium activation, organic modification, pyrrole intercalation, and in situ polymerization, polypyrrole/montmorillonite (PPy/MMT) was synthesized. A polypyrrole/montmorillonite/polypropylene composite membrane (PPy/MMT/PP) was then fabricated using melt compression and coating techniques for pollutant adsorption. The modification of montmorillonite by PPy was examined, alongside the morphology, composition, and structure of PPy/MMT/PP. The membrane’s adsorption performance for methyl orange and Pb²⁺ was evaluated, with a focus on cyclic adsorption. The results showed that PPy increased the interlayer spacing of montmorillonite from 1.23 nm to 1.74 nm and enhanced its specific surface area by 99.424 m²/g. The composite membrane exhibited improved wettability and adsorption capacity, achieving removal rates of 95.98% for methyl orange and 88.48% for Pb²⁺, following pseudo-second-order kinetics. The membrane demonstrated recyclability, maintaining efficient adsorption/desorption over three cycles. This work provides valuable insights and technical support for sustainable wastewater treatment using polymer-based membranes. Full article

In this study, the potential to modify the phase structure and morphology of manganese dioxide synthesized via the hydrothermal route was explored. A series of samples were prepared at different synthesis temperatures (100, 120, 140, and 160 °C) using KMnO₄ and MnSO₄·H₂O as precursors. The phase composition and morphology of the materials were analyzed using various physicochemical methods. The results showed that, at the lowest synthesis temperature (100 °C), an intercalation compound with composition K_1.39Mn₃O₆ and a very small amount of α-MnO₂ was formed. At higher temperatures (120–160 °C), the amount of α-MnO₂ increased, indicating the formation of two clearly distinguished crystal structures. The sample obtained at 160 °C exhibited the highest specific surface area (approximately 157 m²/g). These two-phase (α-MnO₂/K_1.39Mn₃O₆) materials, synthesized at the lowest and highest temperatures, respectively, and containing an appropriate amount of carbon xerogel, were tested as active mass for positive electrodes in a solid-state supercapacitor, using a Na₊-form Aquivion^® membrane as the polymer electrolyte. The electrochemical evaluation showed that the composite with the higher specific surface area, containing 75% manganese dioxide, demonstrated improved characteristics, including 96% capacitance retention after 5000 charge/discharge cycles and high energy efficiency (approximately 99%). These properties highlight its potential for application in solid-state supercapacitors. Full article

The escalating discharge of textile wastewater with plenty of dye and salt has resulted in serious environmental risks. Membranes assembled from two-dimensional (2D) nanomaterials with many tunable interlayer spacings are promising materials for dye/salt separation. However, the narrow layer spacing and tortuous interlayer transport channels of 2D-material-based membranes limit the processing capacity and the permeability of small salt ions for efficient dye/salt separation. In this work, a novel sepiolite/vermiculite membrane was fabricated using Meyer rod-coating and naturally occurring clay. The intercalation of sepiolite Nanofibers between vermiculite Nanosheets provides additional transport nanochannels and forms looser permeable networks, producing composite membranes with remarkably enhanced flux. As a result, the optimized membranes with 80% sepiolite exhibit remarkable flux as high as 78.12 LMH bar⁻¹, outstanding dye rejection (Congo Red~98.26%), and excellent selectivity of dye/salt of 10.41. In addition, this novel all-clay composite membrane demonstrates stable separation performance under acidity, alkalinity and prolonged operation conditions. The large-scale sepiolite/vermiculite membranes made by the simple proposed method using low-cost materials provide new strategies for efficient and environmentally-friendly dye/salt separation. Full article

In recent years, graphene oxide (GO)-based two-dimensional (2D) laminar membranes have attracted considerable attention because of their unique well-defined nanochannels and deliver a wide range of molecular separation properties and fundamentals. However, the practical application of 2D GO layered membranes suffers from instability in aqueous solutions as the interlayer d-spacing of GO membranes is prone to expansion caused by the hydration effect. In this study, the effects of the ethylenediamine (EDA) addition amount on the structure, crosslinking mechanism and separation performance of GO membranes were investigated systematically, and membrane performance was evaluated using water permeability and dye/salt rejection tests. The experimental results show that the amine groups of EDA chemically bond with the hydroxyl functional group (O=C–OH) of GO after intercalation, as evident from Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). By further controlling the amount of the intercalated EDA, the as-prepared GO composite membranes show nanoscale-tuned d-spacing promising for downstream applications. In the demonstrated dye/salt nanofiltration scenario, the EDA intercalated and crosslinked GO membrane has enhanced permeability by over five times and a better dye rejection rate of over 96% compared with pure GO membranes. These findings highlight a facile strategy for controlling nanochannels by tuning the amounts of reactive intercalants. Full article

The transition of peptides or proteins along a misfolding continuum from soluble functional states to pathological aggregates, to ultimately deposit as amyloid fibrils, is a process that underlies an expanding group of human diseases—collectively known as protein-misfolding disorders (PMDs). These include common and debilitating conditions, such as Alzheimer’s disease, Parkinson’s disease, and type-2 diabetes. Compelling evidence has emerged that the complex interplay between the misfolded proteins and biological membranes is a key determinant of the pathogenic mechanisms by which harmful amyloid entities are formed and exert their cytotoxicity. Most efforts thus far to develop disease-modifying treatments for PMDs have largely focused on anti-aggregation strategies: to neutralise, or prevent the formation of, toxic amyloid species. Herein, we review the critical role of the phospholipid membrane in mediating and enabling amyloid pathogenicity. We consequently propose that the development of small molecules, which have the potential to uniquely modify the physicochemical properties of the membrane and make it more resilient against damage by misfolded proteins, could provide a novel therapeutic approach in PMDs. By way of an example, natural compounds shown to intercalate into lipid bilayers and inhibit amyloid–lipid interactions, such as the aminosterols, squalamine and trodusquamine, cholesterol, ubiquinone, and select polyphenols, are discussed. Such a strategy would provide a novel approach to counter a wide range of toxic biomolecules implicit in numerous human amyloid pathologies. Full article

Seawater electrolysis represents a promising green energy technology with significant potential for efficient energy conversion. This study provides an in-depth examination of the key scientific challenges inherent in the seawater-electrolysis process and their potential solutions. Initially, it analyzes the potential issues of precipitation and aggregation at the cathode during hydrogen evolution, proposing strategies such as self-cleaning cathodes and precipitate removal to ensure cathode stability in seawater electrolysis. Subsequently, it addresses the corrosion challenges faced by anode catalysts in seawater, introducing several anti-corrosion strategies to enhance anode stability, including substrate treatments such as sulfidation, phosphidation, selenidation, and LDH (layered double hydroxide) anion intercalation. Additionally, this study explores the role of regulating the electrode surface microenvironment and forming unique coordination environments for active atoms to enhance seawater electrolysis performance. Regulating the surface microenvironment provides a novel approach to mitigating seawater corrosion. Contrary to the traditional understanding that chloride ions accelerate anode corrosion, certain catalysts benefit from the unique coordination environment of chloride ions on the catalyst surface, potentially enhancing oxygen evolution reaction (OER) performance. Lastly, this study presents the latest advancements in the industrialization of seawater electrolysis, including the in situ electrolysis of undiluted seawater and the implementation of three-chamber dual anion membranes coupled with circulating electrolyte systems. The prospects of seawater electrolysis are also explored. Full article

The increasing global demand for lithium, driven by its critical role in battery technology and nuclear applications, necessitates efficient and sustainable extraction methods. Lithium, primarily sourced from brine pools, igneous rocks, and low-grade ores, is extracted through various techniques including ion exchange, precipitation, electrolysis, and adsorption. This paper reviews the current state of lithium extraction, focusing on the diverse methodologies employed to meet the burgeoning demand. Extraction methods exploit the solubilities of salts in brine water, employing techniques like liquid–liquid extraction. Despite the effectiveness, challenges arise from the similar characteristics of lithium and other constituents. Adsorption methods utilize lithium-selective adsorbents, requiring stability and adaptability under varying conditions. Membrane processes, such as electrodialysis and nanofiltration, offer the potential for energy-efficient, continuous lithium recovery. Electrochemical processes facilitate lithium intercalation and deintercalation, emphasizing the need for electrode optimization. The review further delves into emerging technologies, like electrosorption and ionic pumps, highlighting their roles in lithium recovery. Challenges such as temperature dependency, impurity influence, and initial concentration are discussed, underscoring their impact on lithium recovery efficiency. Finally, this paper identifies research gaps and future directions, emphasizing the need for cost-effective, high-performance electrode materials and systems. It concludes that enhancing lithium recovery and separation techniques, particularly in electrochemical Li extraction, is crucial for sustainable lithium production in response to global demand. Full article

In contrast to plants, humans are unable to synthesise carotenoids and have to obtain them from diet. Carotenoids fulfil several crucial biological functions in the organism; however, due to poor solubility in water, their bioavailability from plant-based food is low. The processes of carotenoid absorption and availability in the human body have been intensively studied. The recent experimental findings concerning these processes are briefly presented in the introductory part of this review, together with a summary of such topics as carotenoid carriers, body transport and tissue delivery, to finally report on molecular-level studies of carotenoid binding by membrane receptors. The main message of the review is contained in the section describing computational investigations of carotenoid intercalation and dynamic behaviour in lipid bilayers. The relevance of these computational studies lies in showing the direct link between the microscopic behaviour of molecules and the characteristics of their macroscopic ensembles. Furthermore, studying the interactions between carotenoids and lipid bilayers, and certainly proteins, on the molecular- and atomic-level using computational methods facilitates the interpretation and explanation of their macroscopic properties and, hopefully, helps to better understand the biological functions of carotenoids. Full article

Aqueous zinc-ion batteries (ZIBs) have attracted burgeoning attention and emerged as prospective alternatives for scalable energy storage applications due to their unique merits such as high volumetric capacity, low cost, environmentally friendly, and reliable safety. Nevertheless, current ZIBs still suffer from some thorny issues, including low intrinsic electron conductivity, poor reversibility, zinc anode dendrites, and side reactions. Herein, conductive polyaniline (PANI) is intercalated as a pillar into the hydrated V₂O₅ (PAVO) to stabilize the structure of the cathode material. Meanwhile, graphene oxide (GO) was modified onto the glass fiber (GF) membrane through simple electrospinning and laser reduction methods to inhibit dendrite growth. As a result, the prepared cells present excellent electrochemical performance with enhanced specific capacity (362 mAh g⁻¹ at 0.1 A g⁻¹), significant rate capability (280 mAh g⁻¹ at 10 A g⁻¹), and admirable cycling stability (74% capacity retention after 4800 cycles at 5 A g⁻¹). These findings provide key insights into the development of high-performance zinc-ion batteries. Full article

Doxorubicin (DOX) is a commonly used chemotherapeutic drug, from the anthracycline class, which is genotoxic to neoplastic cells via a DNA intercalation mechanism. It is effective and universal; however, it also causes numerous side effects. The most serious of them are cardiotoxicity and a decrease in the number of myeloid cells. For this reason, targeted DOX delivery systems are desirable, since they would allow lowering the drug dose and therefore limiting systemic side effects. Recently, synthetic dyes, in particular Congo red (CR), have been proposed as possible DOX carriers. CR is a planar molecule, built of a central biphenyl moiety and two substituted naphthalene rings, connected with diazo bonds. In water, it forms elongated ribbon-shaped supramolecular structures, which are able to selectively interact with immune complexes. In our previous studies, we have shown that CR aggregates can intercalate DOX molecules. In this way, they preclude DOX precipitation in water solutions and increase its uptake by MCF7 breast cancer cells. In the present work, we further explore the interactions between DOX, CR, and their aggregates (CR/DOX) with phospholipid membranes. In addition to neutral molecules, the protonated doxorubicin form, DXP, is also studied. Molecular dynamics simulations are employed to study the transfer of CR, DOX, DXP, and their aggregates through POPC bilayers. Interactions of CR, DOX, and CR/DOX with model monolayers are studied with Langmuir trough measurements. This study shows that CR may support the transfer of doxorubicin molecules into the bilayer. Both electrostatic and van der Waals interactions with lipids are important in this respect. The former promote the initial stages of the insertion process, the latter keep guest molecules inside the bilayer. Full article