Search Results (38)

Objectives: With technological advancements, fabricated block onlay allografts have been developed, particularly for grafting severely resorbed alveolar crests before implant surgery. This study aimed to evaluate the alveolar crest lengths of the edentulous maxilla and mandible using cone beam computed tomography (CBCT) and to investigate their correlations with gender and age. The data obtained will serve as preliminary input for block onlay allograft production. Methods: CBCT scans of 451 participants and 595 edentulous jaws were analyzed. The following measurements were taken: the distance between the zygomatic buttress projection and the infraorbital foramen projection onto the crest (U1, U4); from the infraorbital foramen projection to the incisive canal (U2, U3); between the midpoint of the linea obliqua externa projection and the mental foramen projection (L1, L4); and from the mental foramen projection to the midline at the incisive canal level (L2, L3). Measurements were compared across gender and age groups. Results: No significant differences were observed in maxillary measurements between genders. However, the values of L1, L2, and L4 in males were significantly higher than those in females (p < 0.05). Age did not affect substantially most measurements, except for L4, where individuals over 70 years had lower mean values than those under 50 years (p < 0.05). Conclusions: The mandibular posterior region demonstrated the most prominent residual alveolar crest. Mandibular crest lengths were significantly greater in males. Although age showed a limited impact, a reduction in posterior mandibular crest length was evident in individuals over 70 years compared to younger individuals. Full article

Background: The rehabilitation of complex bone defects in the anterior maxilla presents significant challenges in restoring both function and esthetics. A multidisciplinary approach integrating guided bone regeneration (GBR) and connective tissue grafting (CTG) has proven effective in addressing such cases. Methods: This report describes the case of a 60-year-old female patient who presented with severe alveolar ridge resorption and peri-implant bone loss, necessitating an advanced regenerative strategy. The treatment protocol involved the use of autologous and xenogeneic bone grafts in combination with hyaluronic acid and polynucleotides to enhance osteogenesis and tissue integration. A six-month healing period was observed before histological and clinical evaluations were conducted. Results: The results demonstrated a significant increase in lamellar bone formation and vascularization in sites treated with biomodulators compared to conventional GBR techniques. Subsequently, CTG was employed to optimize peri-implant soft tissue volume and stability, leading to improved keratinized tissue thickness and enhanced esthetic outcomes. This case underscores the importance of a comprehensive surgical and prosthetic plan that integrates bone regeneration with mucogingival management for optimal results in implant rehabilitation. Additionally, histological analysis revealed that the incorporation of hyaluronic acid and polynucleotides resulted in improved cellular activity, reduced inflammatory responses, and enhanced overall bone quality. Conclusions: These results highlight the potential role of biomodulators in regenerative procedures. While the findings suggest promising clinical applications, further long-term studies are necessary to validate the outcomes and establish standardized protocols for the integration of advanced biomaterials in implantology. Full article

Background/Objectives: Edentulism is a significant public health concern, particularly among aging populations, affecting oral functionality, aesthetics, and overall health. This study assessed the edentulism status of patients at the Prosthodontic Clinic of Cluj-Napoca, Romania, and explored the possible correlations with socioeconomic factors such as age, general health, smoking, and alcohol consumption. This study aimed to inform public health strategies to reduce edentulism incidence and improve overall oral health outcomes in Romania. Methods: The current study included 208 patients (127 females and 81 males). Each participant completed a standardized data collection form designed to gather comprehensive information on socio-demographic characteristics (including age, gender, and environmental origin), self-reported general health, and lifestyle habits related to smoking and alcohol consumption. The clinical examination was performed by the same operator, recording the odontal and periodontal status, as well as prosthodontic evaluation (including Kennedy class). Results: Findings indicated that female patients had more frequent class 3 and complete edentulism in the maxilla, while males predominantly presented class 3 in the maxilla and class 1 in the mandible. The age distribution revealed that patients aged 20–40 exhibited the highest prevalence of Kennedy class 3, while those over 60 showed a notable increase in complete edentulism (p < 0.05). Although most patients were from urban areas, no significant difference was found between origin and edentulism class. A significant link between alcoholism and mandibular edentulism was also identified (p < 0.05). Conclusions: Edentulism tends to progress with advancing age, often leading to more extensive tooth loss and the need for comprehensive dental rehabilitation. The condition is closely linked to general health status, highlighting its relevance as a potential indicator of systemic health risks. Lifestyle factors, particularly smoking and alcoholism, appear to contribute significantly to the deterioration of oral health, underscoring the importance of preventive strategies and early intervention. Full article

Background: This preliminary case series aimed to evaluate the clinical and morphometric outcomes of maxillomandibular advancement (MMA) surgery in patients with severe obstructive sleep apnea (OSA) using virtual surgical planning (VSP), patient-specific cutting guides, and customized titanium plates. Primary outcomes included changes in the Apnea–Hypopnea Index (AHI), airway dimensions, surgical accuracy, and quality of life. Methods: In this preliminary case series, six patients with severe OSA underwent MMA surgery planned using three-dimensional VSP, and executed with the aid of CAD-/CAM-generated surgical guides and patient-specific osteosynthesis. Clinical variables included AHI, Epworth Sleepiness Scale (ESS), and computed tomography-based airway morphometry. Surgical accuracy was assessed by comparing planned and achieved skeletal movements. Statistical analysis was performed using Wilcoxon signed-rank tests and Spearman’s correlation. Results: The mean preoperative AHI decreased significantly from 48.8 ± 23.6 to 12.4 ± 10.0 (p = 0.035), and ESS scores improved from 14.5 ± 4.6 to 7.8 ± 2.1 (p = 0.029). Mean airway area increased significantly from 51.8 ± 9.0 mm² to 91.8 ± 26.6 mm² (p = 0.035). A strong but non-significant correlation was observed between airway gain and ESS improvement (p = 0.754, p = 0.084). No patients required CPAP at 6-month follow-up, and all were asymptomatic. The anteroposterior accuracy of skeletal movements was high: 82.6% for the maxilla and 85.8% for the pogonion, with mean absolute errors of 1.25 mm and 1.95 mm, respectively. Vertical accuracy was lower, particularly in the chin region, where error analysis showed greater variability. No statistically significant differences were found between planned and achieved movements in any vector. Conclusions: MMA surgery performed with VSP, cutting guides, and customized titanium plates offers a highly effective, safe, and precise treatment modality for selected OSA patients. This approach leads to a significant reduction in AHI, expansion of the upper airway, and improvement in patient-reported daytime functioning. High accuracy in skeletal repositioning—particularly in anteroposterior vectors—supports the reliability and reproducibility of digitally guided orthognathic surgery. These findings reinforce the role of technologically assisted MMA as a definitive treatment for severe OSA. Full article

Background: Bimaxillary (BiMax) advancement surgeries are one of the most frequently performed procedures in the orthognathic subspecialty of craniomaxillofacial surgery. The growing digitalization of the planning process and the shift from physical to virtual settings in procedure design have allowed, among other things, for better visualization of surgeries, improved preparation, and a more profound understanding of individual anatomy. Therefore, the question of the accuracy of performed virtual planning (VP) as well as the available methods of its evaluation arises naturally. The aim of this study was to determine the accuracy of performed BiMax advancement surgeries and propose a new planning accuracy coefficient (PAC). Methods: A group of 35 patients who underwent BiMax surgery were included in the study. Computed tomography (CT) of the head and neck region was performed 2 weeks preoperatively and 6 months postoperatively. Acquired Digital Imaging and Communications in Medicine (DICOM) files were used to perform a VP and a 3-dimensional (3D) cephalometry analysis using IPS CASE DESIGNER^® software, v2.5.7.1 (KLS Martin Group, Tuttlingen, Germany). Statistical significance evaluation and basic measures of central tendency and dispersion of the analyzed variables were calculated. The accuracy of the performed planning was assessed based on the mean absolute error (MAE) between the planned and achieved cephalometric data variables. Additional assessment was performed based on the proposed PAC. Results: VP was found to be accurate in terms of cephalometric data assessing the height of the maxilla and mandible, the inclination of the occlusal plane, the position of the jaws in relation to the skull base, as well as overjet and overbite. There was a discrepancy in results between the classic and proposed methods of accuracy assessment in the case of several of the evaluated variables. Conclusions: The accuracy of the VP of BiMax advancement surgeries can be evaluated based on 3D cephalometry, and it is accurate in the assessment of the previously mentioned variables. There is a need for further analysis and potential development of the proposed PAC; however, the data obtained based on PAC are promising, and by taking into account the magnitude of planned movements, it can facilitate a fair comparison of results presented in different studies based on various assessment methods. Full article

Background: Implant-prosthetic therapy requires a detailed assessment of the bone structure before designing a personalized treatment plan. Tooth extraction at the molar level is followed by a series of bone changes dependent on the patient’s general condition and age and the area in which it was performed. The fractal analysis of cone beam computed tomography (CBCT) represents a way to assess the quality of post-extraction bone regeneration. The purpose of this study was to analyze the alveolar bone changes after tooth extraction using fractal analysis on CBCT images. Methods: This retrospective study included pre- and post-extraction CBCTs at 3 months of 60 patients who underwent 100 extractions of first and/or second molars. Fractal analysis on CBCT images was performed using ImageJ, and the data obtained from the measurements were statistically processed. A multiple regression model was used to assess factors influencing bone remodeling. Results: Fractal analysis performed on CBCT images showed that most patients experienced advanced bone remodeling, this being more pronounced in those from rural areas, in the vertical plane at the mandible and at the second molar. The multiple regression model showed that the factors that play an important role in predicting bone resorption are represented by age group (age above 56 years old is associated with less bone resorption), location (bone resorption is more pronounced at the mandible level), and molar (bone resorption for the second molar is higher). Conclusions: Post-extraction bone changes were influenced by the age of the patient and by the location of the extraction, with the maxilla and first molar having better fractal analysis values compared to the mandible and second molar. These results emphasize the importance of training implantologists in CBCT evaluation to improve personalized implant-prosthetic treatment decisions. Full article

Aim: Class II Division I malocclusion poses significant challenges in orthodontics. The combination of a Herbst appliance and miniscrew anchorage emerged as a practical solution to improve skeletal and dental outcomes. This study employed finite element analysis to evaluate the biomechanical effects of a miniscrew-supported Herbst appliance on mandibular advancement and dentition movement. Methods: High-definition CBCT scans captured the maxilla and mandible’s detailed dental anatomy. The scans were stored in DICOM format for seamless integration with Mimics software (Mimics Innovation Suite research version 21.0, Materialise NV, Leuven, Belgium) for 3D reconstruction and model refinement. The appliance, designed with a maxillary fixed palatal arch and mandibular acrylic splint connected by telescoping rods, incorporated titanium TADs and elastic chains. STL models were optimized in Geomagic x Design for finite element analysis in Abaqus, assigning validated mechanical properties for materials. Tetrahedral meshing and realistic boundary conditions simulated biomechanical interactions. Tetrahedral C3D4 elements were used for meshing, ensuring a balance between computational efficiency and detailed anatomical representation. Tetrahedral meshing and realistic boundary conditions simulated biomechanical interactions. Dynamic simulations in CATIA evaluated mandibular movement. FEA analyzed displacement across dentoalveolar structures along the X, Y, and Z axes to assess treatment efficacy and biomechanical stability. Results: The Z displacement analysis revealed that the incisal edges of the lower central, lateral, and canines shifted lingually by 0.41, 0.4, and 0.47 mm, respectively. Additionally, the apices of the lower central, lateral, and canines displaced backwards by 0.05 mm, 0.05 mm, and 0.07 mm, respectively. Conclusions: The appliance facilitated mandibular advancement, bodily retracted the lower incisors, well-controlled the upper ones, and mesial-tipped the upper posterior teeth. In contrast with traditional functional appliances, it caused the lower anterior teeth to move backwards, while skeletal anchorage overcame some shortcomings of nonsurgical treatments. This method might be a good treatment option for growing skeletal Class II patients. Full article

Background/Objectives: This study aims to determine the validity of a recently developed and published index (the modified Composite Radiographic Index—CRIm) as an indicator of disease gravity and progression in the CBCT scans of patients with medication-related osteonecrosis of the jaw (MRONJ) and to detect possible correlations between the radiologic findings and clinical staging of the disease. Methods: This study included 43 MRONJ patients with CBCT scans from the School of Dentistry of National and Kapodistrian University of Athens, approved by the Research Ethics Committee. Clinical staging (0–3) was provided based on AAOMS 2022 guidelines. A total of 52 CBCT scans were analyzed, with maxillae and mandibles evaluated separately when both were involved. Two independent observers assessed eight radiologic features, including lytic changes, sclerosis, periosteal reaction, sequestration, non-healing extraction sockets, and other findings (sinus involvement, inferior alveolar canal involvement, and jaw fracture). The CRIm was applied to quantify osseous changes, scoring each feature (0 (absent), 1 (localized/single), 2 (extensive/multiple)), yielding a range of 0–12. For the statistical analysis, Fisher’s exact test and Spearman’s correlation coefficient were used. Results: Clinical Stage 1 consisted of 19 jaws, Stage 2 consisted of 16 jaws, and Stage 3 consisted of 17 jaws. No affected jaws were recorded with Stage 0. A statistically significant correlation between the clinical stage and lytic changes, sequestration, and inferior alveolar canal involvement was found (p-value < 0.05). Extensive lytic changes, sclerosis, sequestration, periosteal bone formation, and inferior alveolar canal involvement were mostly observed in clinical Stage 3. Furthermore, a statistically significant correlation between clinical stage and CRIm classification was found (rho = 0.446; p-value < 0.001). Conclusions: The CRIm tends to increase as the clinical stages of MRONJ advance, suggesting a correlation between them. Full article

Mucosal melanomas (MMs) are under-researched tumors with a poor prognosis that arise from melanocytes found in the mucous membranes at different anatomical locations throughout the body. MMs are an uncommon yet highly aggressive tumor that typically develops on mucosal surfaces, predominantly in the head and neck region. MM of the head and neck occurs in 8–10% of all head and neck melanomas. It most commonly affects the mucosa of the nasal cavity and paranasal sinuses (75%), followed by the oral cavity mucosa (25%). A family history and the presence of mucosal nevi are associated with the occurrence of MM. Inhaled and dietary carcinogens are also linked to the development of sinonasal melanoma, much like other malignancies of the nasal cavity. Overexpression of the C-KIT gene is found in more than 80% of all primary mucosal melanomas, with somatic mutations in 10–30% of cases. The presence of these genetic alterations is also reflected in recent clinical studies of specific gene inhibitors that have proven efficiency in the systemic therapy of melanoma. There are various treatment modalities for MM. Surgical therapy involves en bloc surgical resection with a macroscopically visible and palpable mucosal margin of 1.5–2 cm. Partial resection of the maxilla may be considered if it ensures adequate tumor-free margine. Because of its rarity, outcome data for locally advanced head and neck MM is limited and primarily derived from retrospective studies with small case numbers. This review aims to update and summarize findings from clinical trials, prospective observational studies, and retrospective studies, while also exploring future directions for multimodal treatment approaches in this area. Full article

Class III patients have classically been managed through monomaxillary techniques, mainly involving mandibular setback movements. More recently, according to the upper incisor to soft tissue plane (UI-STP) or Barcelona Line (BL) planning protocol, bimaxillary procedures for upper maxilla advancement and reduced mandibular setback have been recommended in order to secure better aesthetic outcomes and avoid upper airway constriction. The present study describes the jaw movements in the sagittal plane performed in class III patients subjected to bimaxillary surgery following the BL protocol. A retrospective evaluation was performed on 124 class III patients subjected to bimaxillary surgery. All subjects underwent upper maxilla advancement. A total of 112 patients received mandible advancement movement (90.3%), nine received mandibular setback (7.25%), and the mandible underwent no movement along the sagittal dimension in the three remaining patients (2.4%). Mandibular advancement was significantly the most frequent treatment option. The presented results suggest that when the BL planning protocol is used as an aesthetic and functional reference, class III occlusion appears mostly related to maxillary sagittal hypoplasia instead of mandible hyperplasia, so bimaxillary advancement surgery should be considered as one of the first-choice procedures for the treatment of these patients. Full article

Background: In recent years, advancements in digital dentistry have provided new opportunities for more predictable and efficient treatment options, particularly in patients with failing dentition. This study aimed to evaluate the effectiveness and accuracy of a fully digital workflow using stackable surgical templates for complete dental arch rehabilitation with implant-supported fixed restorations. Methods: Four patients, comprising two males and two females with a mean age of 66 years, were included in this case series. Each patient underwent meticulous digital planning, including CBCT and intraoral scanning, to create a virtual patient for preoperative assessment and virtual treatment planning. The assessment of the trueness of implant positioning was conducted in Geomagic Control X software (version 2017.0.3) by referencing anatomical landmarks from both the preoperative and one-year postoperative CBCT scans. Results: A total of 25 dental implants were placed in the maxilla, followed by the installation of long-term provisional restorations. The results showed minimal deviation between the planned and actual implant positions, with mean 3D coronal, apical, and angular discrepancies of 0.87 mm, 2.04 mm, and 2.67°, respectively. All implants achieved successful osseointegration, and no failures were recorded, resulting in a 100% survival rate at the one-year follow-up. Patients reported high satisfaction with both the esthetic and functional outcomes based on their subjective feedback. Conclusions: The findings suggest that the use of a fully digital workflow with stackable surgical templates is a reliable and effective approach for immediate implant placement and prosthetic rehabilitation, enhancing treatment precision and patient comfort. Full article

Background: Bimaxillary surgeries (BiMax) are an essential part of the craniomaxillofacial specialty. The osteotomies and subsequent spatial rearrangement of the maxilla and the mandible enable the correction of facial deformities, asymmetry, and malocclusion. Moreover, the movements performed during the procedure affect the morphology of surrounding soft tissues, including the upper airway (UA). Objectives: The objective of this study was to radiologically assess the potential volumetric alterations of the UA in the supine position at various intervals following BiMax advancement surgeries. Methods: A group of 31 patients who underwent BiMax advancement surgery were included in the study. Medical computed tomography (CT) of the head and neck region was performed 2 weeks preoperatively, 1 day postoperatively, and 6 months postoperatively. The UA volumes were calculated and analyzed based on the acquired Digital Imaging and Communications in Medicine (DICOM) files using different software applications. The sella-nasion-A point (SNA) and sella-nasion-B point (SNB) angles were evaluated to measure the achieved maxillomandibular advancement. Results: When comparing the volume of the UA before surgery, post-surgery, and 6 months post-surgery, the p-value was <0.001, indicating statistically significant differences in UA volume between the successive examinations. A statistically significant difference was found between UA volume before surgery and 6 months post-surgery and between UA volume after surgery and 6 months post-surgery, with the obtained p-values being <0.001 and 0.001, respectively. A significantly larger UA volume was observed 6 months post-surgery (mean ± SD: 27.3 ± 7.3) compared to the volume before surgery (mean ± SD: 22.2 ± 6.4), as well as 6 months post-surgery compared to the volume assessed shortly after surgery (mean ± SD: 24.2 ± 7.3). Conclusions: BiMax advancement surgeries result in the significant enlargement of the UA. The volume of the UA does not diminish immediately following the procedure and is not constant; it increases significantly during the postoperative observation period. Full article

Background: Bimaxillary surgery is an elemental procedure in the field of cranio-maxillofacial surgery. It allows for the correction of even the most challenging cases of maxillomandibular disorders, malocclusion, facial asymmetry, and disproportion. The osteotomies and maneuvers carried out during the procedure result in changes to the surrounding tissues, including the maxillary sinuses (MS). The aim of this study was to assess the change in the maxillary sinus volume and the thickness of the mucosa after maxillomandibular advancement (MMA) surgeries. Methods: A group of 25 patients who underwent MMA surgery were included in the study. Computed tomography (CT) of the head and neck region was performed 2 weeks preoperatively and 6 months postoperatively. Acquired Digital Imaging and Communications in Medicine (DICOM) files were analyzed using different software programs to calculate the medium MS mucosa thickness and MS volume. Results: A statistically significant reduction in MS volume was observed (p = 0.015). The change in the median thickness of the MS mucosa was not statistically significant. The median sella-nasion-A point angle (SNA angle) value of the group increased from 80.2 to 83.4 degrees. A weak negative correlation between the SNA delta and the MS volume delta was observed. Spearman’s rank coefficient: (ρ s = −0.381, p = 0.060). Conclusions: The MMA surgery results in a reduction in the MS volume. The amount of forward movement of the maxilla may be correlated with the extent of the MS volume reduction. Full article

Chronic odontogenic maxillary sinusitis (COMS), a prolonged inflammation of the maxillary sinus lasting over 12 weeks, is often a result of periapical lesions, marginal periodontitis, and complications like oro-antral communication (OAC) and fistula (OAF). OAC, commonly emerging post-teeth extraction in the lateral maxilla, lacks documented treatments using advanced platelet-rich fibrin (A-PRF). This study evaluates A-PRF’s efficacy in treating COMS and immediately sealing extensive OAC. A case of a 28-year-old male with COMS linked to a periapical lesion and supernumerary molars is presented. Treatment involved extracting specific teeth while preserving adjacent ones and using A-PRF for immediate OAC closure. A-PRF, enriched with growth factors, was pivotal in healing, showcasing enhanced tissue regeneration, pain reduction, and faster recovery. The findings suggest A-PRF as an effective adjunct in treating extensive OAC and COMS, proposing its inclusion in standard treatment protocols. This study underscores A-PRF’s potential in improving outcomes for patients with COMS and related complications. Full article

Background: The study aims to investigate parameters in patients attending Fujairah Dental Center, including assessing the prevalence of impacted teeth, determining the frequency of associated pathological conditions, and evaluating the patterns and angulations of impacted third molars. Methods: It is a retrospective descriptive study of the panoramic radiographs of patients who attended Fujairah Dental Center for dental care between January 2011 and December 2017. The minimum age for inclusion was 17 years. Clinical records were used to obtain the demographic details of patients, such as age, gender, nationality, medical history, and smoking history. Seven hundred and four panoramic radiographs and clinical records of patients were analyzed. The age range was between 17 and 112 years old, with a mean age of 34 years (S.D 13.5). Results: Of the 704 panoramic radiographs evaluated, 236 (33.6%) X-rays showed teeth impaction with a total of 562 impacted teeth in the upper and lower jaws. Five hundred and twenty-five (93.4%) were impacted third molars, and 37 (6.5%) teeth were other kinds of impacted teeth. Females showed a higher frequency of impacted teeth (62.6%) compared to males (37.4%). The highest prevalence of impacted teeth was found in the 17–25 year age group (61%), and the prevalence declined with advancing age. Impacted third molars were more likely to occur in the mandible (57.3%) than in the maxilla (42.7%). Most of the impacted third molars were in the mesioangular position, followed by the vertical position. The evaluation of the depth of impacted third molars demonstrated that level C impaction was the most frequently seen, followed by level B impaction. Impacted third-molar teeth often presented with two roots (60.7%), followed by a single root (31.3%). An evaluation of the relationship between lower third molars and the inferior dental canal (IDC) revealed that the most frequently observed relation was interrupted (61.5%), followed by a distant relation to the ID canal, and 13% were superimposed. The most common morphological pattern of roots of the impacted third molars was either straight-type or curved and dilacerated roots (5.7%). Additionally, the most noticed pathological conditions associated with impacted teeth were carious second molars adjacent to impacted third molars (42%), which was more likely to be seen in the 17–25-year age group, with females having a higher prevalence than males. Full article