Search Results (50,382)

This study introduces a comprehensive framework combining building information modeling (BIM), project management body of knowledge (PMBOK), and machine learning (ML) to optimize energy efficiency and reduce environmental impacts in Riyadh’s construction sector. The suggested methodology utilizes BIM for dynamic energy simulations and design visualization, PMBOK for integrating sustainability into project-management processes, and ML for predictive modeling and real-time energy optimization. Implementing an integrated model that incorporates building-management strategies and machine learning for both commercial and residential structures can offer stakeholders a thorough solution for forecasting energy performance and environmental impact. This is particularly essential in arid climates owing to specific conditions and environmental limitations. Using a simulation-based methodology, the framework was evaluated based on two representative case studies: (i) a commercial complex and (ii) a residential building. The neural network (NN), reinforcement learning (RL), and decision tree (DT) were implemented to assess performance in energy prediction and optimization. Results demonstrated notable seasonal energy savings, particularly in spring (15% reduction for commercial buildings) and fall (13% reduction for residential buildings), driven by optimized heating, ventilation, and air conditioning (HVAC) systems, insulation strategies, and window configurations. ML models successfully predicted energy consumption and greenhouse gas (GHG) emissions, enabling targeted mitigation strategies. GHG emissions were reduced by up to 25% in commercial and 20% in residential settings. Among the models, NN achieved the highest predictive accuracy (R² = 0.95), while RL proved effective in adaptive operational control. This study highlights the synergistic potential of BIM, PMBOK, and ML in advancing green project management and sustainable construction. Full article

Cotton is a globally strategic crop that plays a crucial role in sustaining national economies and livelihoods. To address the challenges of accurate cotton field extraction in the complex planting environments of Xinjiang’s Alaer reclamation area, a cotton field identification model was developed that integrates multi-source satellite remote sensing data with machine learning methods. Using imagery from Sentinel-2, GF-1, and Landsat 8, we performed feature fusion using principal component, Gram–Schmidt (GS), and neural network techniques. Analyses of spectral, vegetation, and texture features revealed that the GS-fused blue bands of Sentinel-2 and Landsat 8 exhibited optimal performance, with a mean value of 16,725, a standard deviation of 2290, and an information entropy of 8.55. These metrics improved by 10,529, 168, and 0.28, respectively, compared with the original Landsat 8 data. In comparative classification experiments, the endmember-based random forest classifier (RFC) achieved the best traditional classification performance, with a kappa value of 0.963 and an overall accuracy (OA) of 97.22% based on 250 samples, resulting in a cotton-field extraction error of 38.58 km². By enhancing the deep learning model, we proposed a U-Net architecture that incorporated a Convolutional Block Attention Module and Atrous Spatial Pyramid Pooling. Using the GS-fused blue band data, the model achieved significantly improved accuracy, with a kappa coefficient of 0.988 and an OA of 98.56%. This advancement reduced the area estimation error to 25.42 km², representing a 34.1% decrease compared with that of the RFC. Based on the optimal model, we constructed a digital map of continuous cotton cropping from 2021 to 2023, which revealed a consistent decline in cotton acreage within the reclaimed areas. This finding underscores the effectiveness of crop rotation policies in mitigating the adverse effects of large-scale monoculture practices. This study confirms that the synergistic integration of multi-source satellite feature fusion and deep learning significantly improves crop identification accuracy, providing reliable technical support for agricultural policy formulation and sustainable farmland management. Full article

Establishing precise welding parameters is essential to achieving the desired bead geometry and ensuring consistent quality in manufacturing processes. However, determining the optimal configuration of parameters remains a challenge, particularly when relying on limited experimental data. This study proposes the use of artificial neural networks (ANNs), with their architecture optimized via differential evolution (DE), to predict key MAG welding parameters based on target bead geometry. To address data limitations, cross-validation and data augmentation techniques were employed to enhance model generalization. In addition to the ANN model, machine learning algorithms commonly recommended for small datasets, such as K-nearest neighbors (KNNs) and support vector machines (SVMs), were implemented for comparative evaluation. The results demonstrate that all models achieved good predictive performance, with SVM showing the highest accuracy among the techniques tested, reinforcing the value of integrating traditional ML models for benchmarking purposes in low-data scenarios. Full article

Predictive maintenance (PdM) is a cornerstone of smart manufacturing, enabling the early detection of equipment degradation and reducing unplanned downtimes. This study proposes an advanced machine learning framework that integrates the Extreme Learning Machine (ELM) with a novel hybrid metaheuristic optimization algorithm, the Polar Lights Salp Cooperative Optimizer (PLSCO), to enhance predictive modeling in manufacturing processes. PLSCO combines the strengths of the Polar Light Optimizer (PLO), Competitive Swarm Optimization (CSO), and Salp Swarm Algorithm (SSA), utilizing a cooperative strategy that adaptively balances exploration and exploitation. In this mechanism, particles engage in a competitive division process, where winners intensify search via PLO and losers diversify using SSA, effectively avoiding local optima and premature convergence. The performance of PLSCO was validated on CEC2015 and CEC2020 benchmark functions, demonstrating superior convergence behavior and global search capabilities. When applied to a real-world predictive maintenance dataset, the ELM-PLSCO model achieved a high prediction accuracy of 95.4%, outperforming baseline and other optimization-assisted models. Feature importance analysis revealed that torque and tool wear are dominant indicators of machine failure, offering interpretable insights for condition monitoring. The proposed approach presents a robust, interpretable, and computationally efficient solution for predictive maintenance in intelligent manufacturing environments. Full article

In rural and mountainous regions, power supply reliability remains a persistent challenge due to structural vulnerabilities, data incompleteness, and limited automation. In this study, a data-driven methodology is leveraged, wherein a validated machine learning framework comprising Random Forest (RF), Lasso Regression, and Recursive Feature Elimination (RFE) is applied to analyze outage data. The machine learning models, validated on a held-out test set, demonstrated modest but positive predictive performance, confirming a quantifiable, non-random relationship between grid structure and restoration time. This validation provides a credible foundation for the subsequent feature importance analysis. Through a transparent, consensus-based analysis of these models, the most robust influencing factors were identified. The results reveal that key structural indicators related to network redundancy (e.g., Inter-Bus Loop Rate) and electrical stress (e.g., Peak Daily Load Current, Load Factor) are the most significant predictors of prolonged outages. Furthermore, statistical analyses confirm that increasing structural redundancy and regulating line loads can effectively reduce outage duration. These findings offer practical, data-driven guidance for prioritizing investments in rural grid planning and reinforcement. This study contributes to the broader application of machine learning in energy systems, particularly showcasing a robust methodology for identifying key drivers under data and resource constraints. Full article

Predicting driver injury severity is critical for enhancing road safety, but it is complicated because fatal accidents inherently create class imbalance within datasets. This study conducts a comparative analysis of machine-learning (ML) and deep-learning (DL) models for multi-class driver injury severity prediction using a comprehensive dataset of 107,195 traffic accidents from the Adana, Mersin, and Antalya provinces in Turkey (2018–2023). To address the significant imbalance between fatal, injury, and non-injury classes, the hybrid SMOTE-ENN algorithm was employed for data balancing. Subsequently, feature selection techniques, including Relief-F, Extra Trees, and Recursive Feature Elimination (RFE), were utilized to identify the most influential predictors. Various ML models (K-Nearest Neighbors (KNN), XGBoost, Random Forest) and DL architectures (Convolutional Neural Network (CNN), Long Short-Term Memory (LSTM), Recurrent Neural Network (RNN)) were developed and rigorously evaluated. The findings demonstrate that traditional ML models, particularly KNN (0.95 accuracy, 0.95 F1-macro) and XGBoost (0.92 accuracy, 0.92 F1-macro), significantly outperformed DL models. The SMOTE-ENN technique proved effective in managing class imbalance, and RFE identified a critical 25-feature subset including driver fault, speed limit, and road conditions. This research highlights the efficacy of well-preprocessed ML approaches for tabular crash data, offering valuable insights for developing robust predictive tools to improve traffic safety outcomes. Full article

Soil water content (SWC) critically governs the physical and mechanical behavior of soils. However, conventional methods such as oven drying are laborious, time-consuming, and difficult to replicate in the field. To overcome these limitations, we developed an image-based interpolation framework that leverages histogram statistics from 12 soil surface photographs spanning 3.83% to 19.75% SWC under controlled lighting. For each image, pixel-level values of red, green, blue (RGB) channels and hue, saturation, value (HSV) channels were extracted to compute per-channel histograms, whose empirical means and standard deviations were used to parameterize Gaussian probability density functions. Linear interpolation of these parameters yielded synthetic histograms and corresponding images at 1% SWC increments across the 4–19% range. Validation against the original dataset, using dice score (DS), Bhattacharyya distance (BD), and Earth Mover’s Distance (EMD) metrics, demonstrated that the interpolated images closely matched observed color distributions. Average BD was below 0.014, DS above 0.885, and EMD below 0.015 for RGB channels. For HSV channels, average BD was below 0.074, DS above 0.746, and EMD below 0.022. These results indicate that the proposed method reliably generates intermediate SWC data without additional direct measurements, especially with RGB. By reducing reliance on exhaustive sampling and offering a cost-effective dataset augmentation, this approach facilitates large-scale, noninvasive soil moisture estimation and supports machine learning applications where field data are scarce. Full article

Reference crop evapotranspiration (ETo) is a crucial component in calculating crop water requirements, and its accurate prediction is vital for effective agricultural water management and irrigation planning. Generally, the FAO Penman-Monteith 56 equation is recommended as the benchmark’s method for calculating Eto, but it requires extensive meteorological data—posing challenges in regions with sparse monitoring infrastructure. This review addresses a critical gap: the lack of systematic comparative analysis of machine learning (ML) methods for ETo estimation under data-limited conditions. We review 325 studies searched by Web of Science from 2001 to 2024, focusing on applications of machine learning models in ETo modeling and prediction. Then, this review evaluates these models regarding their characteristics, accuracy, and applicability, including artificial neural networks (ANN), support vector machines (SVM), ensemble learning (EL), and deep learning (DL). Crucially, EL models demonstrate superior stability and cost-effectiveness, with typical performance metrics of R² > 0.95 and RMSE ranging from 0.1 to 0.6 mm·d⁻¹. Notably, DL methods achieve the highest accuracy under conditions of data scarcity. Using only temperature data, they attain competitive performance (R² = 0.81, RMSE = 0.56 mm·d⁻¹). Additionally, we further synthesize optimal input variables, performance metrics, and domain-specific implementation guidelines. In summary, this study provides a comprehensive and up-to-date overview of machine learning methods for ETo modeling, thereby offering valuable insights for researchers in the field of evapotranspiration. Full article

Accurate postharvest quality evaluation of soybeans is essential for preserving product value and meeting industry standards. Traditional inspection methods are often inconsistent, labor-intensive, and unsuitable for high-throughput operations. This study presents a non-destructive soybean classification approach using a simplified reflectance-mode hyperspectral imaging system equipped with a single light source, eliminating the complexity and maintenance demands of dual-light configurations used in prior studies. A spectral–spatial data fusion strategy was developed to classify harvested soybeans into four categories: normal, split, diseased, and foreign materials such as stems and pods. The dataset consisted of 1140 soybean samples distributed across these four categories, with spectral reflectance features and spatial texture attributes extracted from each sample. These features were combined to form a unified feature representation for use in classification. Among multiple machine learning classifiers evaluated, Linear Discriminant Analysis (LDA) achieved the highest performance, with approximately 99% accuracy, 99.05% precision, 99.03% recall and 99.03% F1-score. When evaluated independently, spectral features alone resulted in 98.93% accuracy, while spatial features achieved 78.81%, highlighting the benefit of the fusion strategy. Overall, this study demonstrates that a single-illumination HSI system, combined with spectral–spatial fusion and machine learning, offers a practical and potentially scalable approach for non-destructive soybean quality evaluation, with applicability in automated industrial processing environments. Full article

Background/Objectives: Cardiac sarcoidosis (CS) is an inflammatory cardiomyopathy with a strong clinical impact on patients affected by the disease and a challenging diagnosis. Methods: This comprehensive narrative review evaluates the role of [18F]fluorodesoxyglucose ([18F]FDG) positron emission tomography (PET)-based radiomics and machine learning (ML) analyses in the assessment of CS. Results: The value of [18F]FDG PET-based radiomics and ML has been investigated for the clinical settings of diagnosis and prognosis of patients affected by CS. Even though different radiomics features and ML models have proved their clinical role in these settings in different cohorts, the clear superiority and added value of one of them across different studies has not been demonstrated. In particular, textural analysis and ML showed high diagnostic value for the diagnosis of CS in some papers, but had controversial results in other works, and may potentially provide prognostic information and predict adverse clinical events. When comparing these analyses with the classic semiquantitative evaluation, a conclusion about which method best suits the final objective cannot be drawn with the available references. Different methodological issues are present when comparing different papers, such as image segmentation and feature extraction differences that are more evident. Furthermore, the intrinsic limitations of radiomics analysis and ML need to be overcome with future research developed in multicentric settings with protocol harmonization. Conclusions: [18F]FDG PET-based radiomics and ML show preliminary promising results for CS evaluation, but remain investigational tools since the current evidence is insufficient for clinical adoption due to methodological heterogeneity, small sample sizes, and lack of standardization. Full article

This study aims to investigate the mechanical behavior of cement mortar and concrete through a hybrid approach that integrates artificial intelligence (AI) techniques with finite element modeling (FEM). Support Vector Machine (SVM) models with Radial Basis Function (RBF) and polynomial kernels, along with Multilayer Perceptron (MLP) neural networks, were employed to predict the compressive strength (Fc) and flexural strength (Fs) of cement mortar incorporating nano-silica (NS) and micro-silica (MS). The dataset comprises 89 samples characterized by six input parameters: water-to-cement ratio (W/C), sand-to-cement ratio (S/C), nano-silica-to-cement ratio (NS/C), micro-silica-to-cement ratio (MS/C), and curing age. Simultaneously, the axial compressive behavior of C20-grade concrete was numerically simulated using the Concrete Damage Plasticity (CDP) model in ABAQUS, with stress–strain responses benchmarked against the analytical models proposed by Mander, Hognestad, and Kent–Park. Due to the inherent limitations of the finite element software, it was not possible to define material models incorporating NS and MS; therefore, the simulations were conducted using the mechanical properties of conventional concrete. The SVM-RBF model demonstrated the highest predictive accuracy with RMSE values of 0.163 (R² = 0.993) for Fs and 0.422 (R² = 0.999) for Fc, while the Mander model showed the best agreement with experimental results among the FEM approaches. The study demonstrates that both the SVM-RBF and CDP-based modeling approaches serve as robust and complementary tools for accurately predicting the mechanical performance of cementitious composites. Furthermore, this research addresses the limitations of conventional FEM in capturing the effects of NS and MS, as well as the existing gap in integrated AI-FEM frameworks for blended cement mortars. Full article

Given the critical importance of timely forest fire detection to mitigate environmental and socio-economic consequences, this research aims to achieve high detection accuracy while maintaining real-time operational efficiency, with a particular focus on minimizing computational complexity. We propose a novel framework that systematically integrates normalization, feature selection, adaptive oversampling, and classifier optimization to enhance detection performance while minimizing computational overhead. The evaluation is conducted using three distinct Canadian forest fire datasets: Alberta Forest Fire (AFF), British Columbia Forest Fire (BCFF), and Saskatchewan Forest Fire (SFF). Initial classifier benchmarking identified the best-performing tree-based model, followed by normalization and feature selection optimization. Next, four oversampling methods were evaluated to address class imbalance. An ablation study quantified the contribution of each module to overall performance. Our targeted, stepwise strategy eliminated the need for exhaustive model searches, reducing computational cost by 97.75% without compromising accuracy. Experimental results demonstrate substantial improvements in F1-score, AFF (from 69.12% to 82.75%), BCFF (61.95% to 77.91%), and SFF (90.03% to 96.18%) alongside notable reductions in False Negative Rates compared to baseline models. Full article

This study presents the development of a noise-monitoring system for the storage ring at the Siam Photon Source, designed to detect and classify noise patterns in real time using beam position monitor (BPM) data. Noise patterns were categorized into four classes: broad peak, multipeak, normal peak, and no beam. Two BPMs located at the multipole wiggler section, BPM-MPW1 and BPM-MPW2, were selected for detailed monitoring based on consistent noise trends observed across the ring. The dataset was organized in two complementary formats: two-dimensional (2D) images used for training and validating the models and one-dimensional (1D) CSV files containing the corresponding raw numerical signal data. Pre-trained deep learning and 1D convolutional neural network (CNN) models were employed to classify these patterns, achieving an overall classification accuracy of up to 99.83%. The system integrates with the EPICS control framework and archiver log data, enabling continuous data acquisition and long-term analyses. Visualization and monitoring features were developed using CS-Studio/Phoebus, providing both operators and beamline scientists with intuitive tools to track beam quality and investigate noise-related anomalies. This approach highlights the potential of combining beam diagnostics with machine learning to enhance operational stability and optimize the synchrotron radiation performance for user experiments. Full article

This study investigates the spatial coupling between geohazard susceptibility and soil conservation capacity in Guangdong Province, China, using integrated spatial analysis and machine learning approaches. Through kernel density estimation, hotspot analysis, principal component analysis (PCA), and t-SNE clustering applied to 11,252 geohazard records and nine soil conservation factors, we identify three critical mechanisms: (1) Topographic steepness (LS factor) constitutes the primary control on geohazard distribution (r = 0.162, p < 0.001), with high-risk clusters concentrated in northeastern mountainous regions (Meizhou-Huizhou-Heyuan); (2) Vegetation coverage (C_mean) mediates rainfall impacts, exhibiting significant risk reduction (r = −0.099, p < 0.001) despite counterintuitive negative correlations with mean rainfall erosivity; (3) Soil conservation effectiveness depends on topographic context, reducing geohazard density in moderate slopes (Cluster 0: 527.04) but proving insufficient in extreme terrain (Cluster 2: LS = 20.587). The emerging role of rainfall variability (R_slope, r = 0.183) highlights climate change impacts. Full article

This study investigates the certification outcomes of intermediate-level ICs in The National Fire Service Academy in South Korea through a comprehensive quantitative analysis of their evaluated competencies. Using assessment data from 141 candidates collected from 2022 to 2024, we examine how scores on six higher-order competencies—comprising 35 sub-competencies—influence pass or fail results. Descriptive statistics, correlation analysis, logistic regression (a statistical model for binary outcomes), random forest modeling (an ensemble decision-tree machine-learning method), and principal component analysis (PCA; a dimensionality reduction technique) were applied to identify significant predictors of certification success. Visualization techniques, including heatmaps, box plots, and importance bar charts, were used to illustrate performance gaps between successful and unsuccessful candidates. Results indicate that competencies related to decision-making under pressure and crisis leadership most strongly correlate with positive outcomes. Furthermore, unsupervised clustering analysis (a data-driven grouping method) revealed distinctive performance patterns among candidates. These findings suggest that current evaluation frameworks effectively differentiate command readiness but also highlight specific skill domains that may require enhanced instructional focus. The study offers practical implications for fire training academies, policymakers, and certification bodies, particularly in refining curriculum design, competency benchmarks, and evaluation criteria to improve fireground leadership training and assessment standards. Full article