Search Results (25)

This study presents a novel ion-imprinted fiber material, I-(PP-g-GMA-NMDG), designed for the rapid and selective adsorption of borate ions. Leveraging low-temperature plasma graft polymerization, polypropylene (PP) melt-blown fibers were functionalized with glycidyl methacrylate (GMA) and N-methyl-D-glucamine (NMDG) to introduce tailored recognition sites. Systematic optimization of plasma parameters (100 W discharge power, O₂ atmosphere) and liquid-phase grafting conditions (28.5% GMA, 85 °C, 2.5 h) achieved a grafting rate of 203.26%. The imprinted fibers exhibited exceptional adsorption performance, with a maximum capacity of 35.85 mg/g at pH 9, reaching 90% saturation within 60 min. Adsorption kinetics adhered to a pseudo-second-order model, while the Freundlich isotherm indicated multilayer adsorption. Competitive ion experiments demonstrated high selectivity for B(OH)₄⁻ over anions (SO₄²⁻ and Cl⁻) and cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺), which was attributed to the precise spatial and charge complementarity of the imprinted cavities. Characterization via FT-IR, XRD, and SEM confirmed successful synthesis and structural stability. The material retained 78.1% adsorption efficiency after five regeneration cycles, showcasing its practicality for boron recovery from wastewater. This work advances boron-selective adsorption technology by combining plasma modification with ion imprinting, offering a sustainable solution for industrial and environmental applications. Full article

Addressing hazards from dangerous pollutants requires specialized techniques and risk-control strategies, including detection, neutralization and disposal of contaminants. Smart polymers, designed for specific contaminants, provide powerful solutions for hazardous compound challenges. Their remarkable performance capabilities and potential applications present exciting opportunities for further exploration and development in this field. This editorial aims to provide a comprehensive overview of smart materials with unique features and emerging polymeric technologies that are being developed for isolation, screening, removal, and decontamination of hazardous compounds (e.g., heavy metals, pharmaceutically active contaminants, hormones, endocrine-disrupting chemicals, pathogens, and energetic materials). It highlights recent advancements in synthesis methods, characterization, and the applications of molecularly imprinted polymers (MIPs), along with alternative smart polymeric platforms including hydrogels, ion-imprinted composites, screen-printed electrodes, nanoparticles, and nanofibers. MIPs offer highly selective recognition properties, reusability, long-term stability, and low production costs. Various MIP types, including particles and films, are used in applications like sensing/diagnostic devices for hazardous chemicals, biochemicals, pharmaceuticals, and environmental safety. Full article

Zinc-imprinted polymer (ZnIP) and non-imprinted polymer (NIP) were synthesized by radical polymerization, and their properties were studied. The novelty of the work lies in the use of humic acids isolated from coals of the Shubarkol deposit (Karaganda, Kazakhstan) as a basis for the imprinted polymer matrix, with methacrylic acid and ethylene glycol dimethacrylate as a functional monomer and a cross-linking agent, respectively. The composition and structure of ZnIP and NIP were characterized using various physicochemical methods. The specific surface area of ZnIP determined by the BET method was 40.60 ± 0.4 m²/g, which is almost twice as high as the similar indicator for NIP (21.50 ± 0.3 m²/g). In sorption tests of solutions with bimetallic ions, ZnIP demonstrates higher adsorption: 96.15% for Zn²⁺ and 74.88% for Pb²⁺, while NIP adsorbs only 81.33% and 60.11%, respectively. Sorption on both polymers is described by a pseudo-first-order equation (r > 0.99). The distribution coefficients for ZnIP are higher than for NIP. ZnIP has a relative selectivity that exceeds NIP by 2.90 times. The research results indicate the promise of using ZnIP for the selective removal of zinc ions from solutions of multicomponent systems, including wastewater, making it a valuable material for solving environmental and technological problems. Full article

Multi-ion-imprinted polymers (MIIPs) are materials with a wide range of applications mainly focused on environmental recovery, mining, technology, sensors, etc. MIIPs can incorporate ions such as heavy metals, transition metals, rare earth elements, radionuclides, and other types of ions. The chemical structures of MIIPs can be designed for different purposes and with certain morphologies, such as gels, crystals, or powders, and the surface area and porosity are also considered. All these properties provide the material with several desirable characteristics, like high selectivity, high specificity, adequate efficiency, good stability, the possibility of reusability, and strategy technology adaptation. In this review, we show the multitude of challenges of multi-ion imprinted polymer chemical synthesis based on the different and interesting methods reported previously. Full article

Molecularly imprinted membranes (MIMs) have been a focal research interest since 1990, representing a breakthrough in the integration of target molecules into membrane structures for cutting-edge sensing applications. This paper traces the developmental history of MIMs, elucidating the diverse methodologies employed in their preparation and characterization on two-dimensional solid-supported substrates. We then explore the principles and diverse applications of MIMs, particularly in the context of emerging technologies encompassing electrochemistry, surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), and the quartz crystal microbalance (QCM). Furthermore, we shed light on the unique features of ion-sensitive field-effect transistor (ISFET) biosensors that rely on MIMs, with the notable advancements and challenges of point-of-care biochemical sensors highlighted. By providing a comprehensive overview of the latest innovations and future trajectories, this paper aims to inspire further exploration and progress in the field of MIM-driven sensing technologies. Full article

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application. Full article

Large volumes of wastewater containing toxic contaminants (e.g., heavy metal ions, organic dyes, etc.) are produced from industrial processes including electroplating, mining, petroleum exploitation, metal smelting, etc., and proper treatment prior to their discharge is mandatory in order to alleviate the impacts on aquatic ecosystems. Adsorption is one of the most effective and practical methods for removing toxic substances from wastewater due to its simplicity, flexibility, and economics. Recently, hierarchical oxide composites with diverse morphologies at the micro/nanometer scale, and the combination advantages of oxides and composite components have been received wide concern in the field of adsorption due to their multi-level structures, easy functionalization characteristic resulting in their large transport passages, high surface areas, full exposure of active sites, and good stability. This review summarizes the recent progress on their typical preparation methods, mainly including the hydrothermal/solvothermal method, coprecipitation method, template method, polymerization method, etc., in the field of selective adsorption and competitive adsorption of hazardous substances from wastewater. Their formation processes and different selective adsorption mechanisms, mainly including molecular/ion imprinting technology, surface charge effect, hard-soft acid-base theory, synergistic effect, and special functionalization, were critically reviewed. The key to hierarchical oxide composites research in the future is the development of facile, repeatable, efficient, and scale preparation methods and their dynamic adsorption with excellent cyclic regeneration adsorption performance instead of static adsorption for actual wastewater. This review is beneficial to broaden a new horizon for rational design and preparation of hierarchical oxide materials with selective adsorption of hazardous substances for wastewater treatment. Full article

Ion Imprinting Technology (IIT) is an innovative technique that produces Ion-Imprinted polymers (IIPs) capable of selectively extracting ions. IIPs exhibit strong specificity, excellent stability, and high practicality. Due to their superior characteristics, the application of IIPs for lithium resource extraction has garnered significant attention. This paper discusses the following aspects based on existing conventional processes for lithium extraction and the latest research progress in lithium IIPs: (1) a detailed exposition of existing lithium extraction processes, including comparisons and summaries; (2) classification, comparison, and summarization of the latest lithium IIPs based on different material types and methods; (3) summarization of the applications of various lithium IIPs, along with a brief description of future directions in the development of lithium IIP applications. Finally, the prospects for targeted recovery of lithium resources using lithium IIPs are presented. Full article

Revolutionary technological advances have posed new challenges to humans, and modern technology needs to seek new breakthroughs. Imprinting technology, also known as template technology, is a technology based on the interdisciplinary development of polymer chemistry, biochemistry, chemical engineering, and materials science. The polymer prepared with imprinting technology, termed as imprinted polymer, has a memory effect on specific ions and can realize the selective recognition and enrichment of target species. Therefore, imprinting technology has great potential for application in water environment remediation and industrial wastewater treatment, especially for the treatment of low-concentration, toxic, and difficult-to-degrade heavy metal-containing wastewater. Herein, an overview of recent advances in imprinting technology in the field of adsorption and separation is presented, focusing on methods for the synthesis of imprinted polymers and their application to the separation and enrichment of metal ions in water. Finally, we propose several key issues that remain to be solved in the near future. Full article

A novel recoverable magnetic Cd(II) ion-imprinted polymer was synthesized on the surface of silica-coated Fe₃O₄ particles via the surface imprinting technique and chemical grafting method. The resulting polymer was used as a highly efficient adsorbent for the removal of Cd(II) ions from aqueous solutions. The adsorption experiments revealed that Fe₃O₄@SiO₂@IIP had a maximum adsorption capacity of up to 29.82 mg·g⁻¹ for Cd(II) at an optimal pH of 6, with the adsorption equilibrium achieved within 20 min. The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm adsorption model. Thermodynamic studies showed that the adsorption of Cd(II) on the imprinted polymer was spontaneous and entropy-increasing. Furthermore, the Fe₃O₄@SiO₂@IIP could rapidly achieve solid–liquid separation in the presence of an external magnetic field. More importantly, despite the poor affinity of the functional groups constructed on the polymer surface for Cd(II), we improved the specific selectivity of the imprinted adsorbent for Cd(II) through surface imprinting technology. The selective adsorption mechanism was verified by XPS and DFT theoretical calculations. Full article

In this work, a novel metal–organic frameworks (MOFs)-based ion-imprinted polymer (MIIP) was prepared to remove Co(II) from simulated radioactive wastewater. The batch experiments indicated that the sorption was well described by the pseudo-second-order kinetic and Langmuir models, and it is monolayer chemisorption. The theoretical maximum sorption capacity was estimated to be 181.5 mg∙g⁻¹, which is by far the reported maximum value of Co(II) sorption by the imprinted materials. The MIIP presented an excellent selectivity for Co(II) in the presence of common monovalent and divalent metal ions, and the selectivity coefficients were 44.31, 33.19, 10.84, 27.71, 9.45, 16.25, and 7.60 to Li(I), K(I), Mg(II), Ca(II), Mn(II), Ba(II), and Cd(II), respectively. The sorption mechanism was explored by X-ray photoelectron spectroscopy (XPS) technology and density functional theory (DFT) calculations, suggesting that Co(II) was adsorbed by the MIIP via the chelation of 4-vinylpyridine (VP) ligands with Co(II), which was a spontaneous process, and the optimal coordination ratio of VP to Co(II) was 6. This work suggested that the MIIP has a high sorption capacity and excellent selectivity for Co(II), which is of great significance for the selective separation of Co-60 from radioactive wastewater. Full article

Metal-enhanced fluorescence (MEF) is an important fluorescence technology due to its ability to significantly improve the fluorescence intensity. Here, we present a new MEF configuration of the bionic nanorod array illuminated by radially polarized vector beam (RVB). The bionic nanorod array is fabricated via a nanoimprinting method by using the wings of the Chinese cicada “meimuna mongolica” as bio-templates, and later coating gold film by ion sputtering deposition method. The MEF performance of the prepared substrate is tested by a home-made optical system. The experiment results show that, in the case of RVB excitation, the intensity of fluorescence is more than 10 times stronger with the nano-imprinted substrate than that with glass. Using the bionic nanoarray as a substrate, the intensity of fluorescence is ~2 times stronger via RVB than that by the linearly polarized beam. In addition, the prepared substrate is verified to have good uniformity. Full article

The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided. Full article

Downsized and complex micro-machining structures have to meet quality requirements concerning geometry and convince through increasing functionality. The development and use of cutting tools in the sub-millimeter range can meet these demands and contribute to the production of intelligent components in biomedical technology, optics or electronics. This article addresses the development of double-edged micro-cutters, which consist of a two-part system of cutter head and shaft. The cutting diameters are between 50 and 200 μm. The silicon carbide cutting heads are manufactured from the solid material using microsystem technology. The substrate used can be structured uniformly via photolithography, which means that 5200 homogeneous micro-milling heads can be produced simultaneously. This novel batch approach represents a contrast to conventionally manufactured micro-milling cutters. The imprint is taken by means of reactive ion etching using a mask made of electroplated nickel. Within this dry etching process, characteristic values such as the etch rate and flank angle of the structures are critical and will be compared in a parameter analysis. At optimal parameters, an anisotropy factor of 0.8 and an etching rate of 0.34 µm/min of the silicon carbide are generated. Finally, the milling heads are diced and joined. In the final machining tests, the functionality is investigated and any signs of wear are evaluated. A tool life of 1500 mm in various materials could be achieved. This and the milling quality achieved are in the range of conventional micro-milling cutters, which gives a positive outlook for further development. Full article

Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications. Full article