Search Results (375)

Rapid urbanization has exacerbated the urban heat island effect, posing a significant threat to human health and urban ecosystems. While numerous studies have demonstrated that urban morphology significantly influences land surface temperatures (LSTs), few have systematically explored the impact and contribution of urban morphology on LST across different functional zones. Therefore, this study takes Xi’an as a case and employs an interpretable CatBoost-SHAP machine learning model to evaluate the nonlinear influence of building landscape features on LST in different functional zones during summer. The results indicate the following: (1) The highest LST in the study area reached 52.68 °C, while the lowest was 21.68 °C. High-temperature areas were predominantly concentrated in the urban center and industrial zones with dense buildings, whereas areas around water bodies and green spaces exhibited relatively lower temperatures. (2) SHAP analysis revealed that landscape indicators exerted the most substantial impact across all functional zones, with green space zones contributing up to 62%. Among these, fractional vegetation coverage (FVC), as a core landscape factor, served as the primary cooling factor in all six functional zones and consistently demonstrated a negative effect. (3) Population density (POP) exhibited a generally high SHAP contribution across all functional zones, showing a positive correlation. Its effect was most pronounced in commercial zones, accounting for 16%. When POP ranged between 0 and 250 people, the warming effect was particularly prominent. (4) The mean building height (MBH) constituted a major influencing factor in most functional zones, especially in residential zones, where the SHAP value reached 0.7643. Within the range of 10–20 m, the SHAP value increased sharply, indicating a significant warming effect. (5) This study proposes targeted cooling strategies tailored to six functional zones, providing a scientific basis for formulating targeted mitigation strategies for different functional zones to alleviate the urban heat island effect. Full article

Oncological hyperthermia (HT) is a medical technique aimed at heating a specific region of the human body containing a tumour. The heat makes the tumour cells more sensitive to the cytotoxic effects of radiotherapy and chemotherapy. Electromagnetic (EM) HT devices radiate a single-frequency EM field that induces a temperature increase in the treated region of the body. The typical radiative HT frequencies are between 60 and 150 MHz for deep HT applications, while 434 MHz and 915 MHz are used for superficial HT. The input EM power can reach up to 2000 W in deep HT and 250 W in superficial applications, and the E-field should be linearly polarized. This study proposes the development and use of E-field sensors to measure the distribution and evaluate the polarization of the E-field radiated by HT devices inside equivalent phantoms. This information is fundamental for the validation and assessment of HT systems. The sensor is constituted by three mutually orthogonal probes. Each probe is composed of a dipole, a diode, and a high-impedance transmission line. The fundamental difference in the operability of this sensor with respect to the standard E-field square-law detectors lies in the high-power values of the considered EM sources. Numerical analyses were performed to optimize the design of the E-field sensor in the whole radiative HT frequency range and to characterize the sensor behaviour at the power levels of HT. Then the sensor was realized, and measurements were carried out to evaluate the E-field radiated by commercial HT systems. The results show the suitability of the developed sensor to measure the E-field radiated by HT applicators. Additionally, in the measured devices, the linear polarization is evidenced. Accordingly, the work shows that in these devices, a single probe can be used to completely characterize the field distribution. Full article

Phytosterols (PS) have specific oxidation rules in different lipid media. After oxidation, PS will form oxidation products, which has potential physiological toxicity to the human body. Camellia seed oil (CSO) is a unique emerging edible oil in China. This oil has a fatty acid composition similar to olive oil, in which oleic acid is dominant. In order to solve the thermal oxidation of PS in CSO at high temperature (180 °C), we studied its antioxidant strategy by evaluating different antioxidants. Four antioxidants—BHA, TBHQ, epigallocatechin gallate (EGCG), and α-tocopherol (VE)—along with one synergist, citric acid (CA), were selected and used in this study. The antioxidant effects of different combinations (single antioxidant, single antioxidant + CA, mixed antioxidant, mixed antioxidant + CA) were compared. After 180 min of heating, the PS and phytosterols oxidation products (7α-hydroxy-, 7β-hydroxy-, 5α,6α-epoxy-, 5β,6β-epoxy-, 7-keto-, and trihydroxy-PS) were estimated by GC-MS. Through comparative analysis, the results showed that the combination of mixed antioxidants and CA had the best antioxidant effect, and the inhibition rate of VE + TBHQ +CA was as high as 42%, which had a breakthrough significance for stabilizing the thermal oxidation of PS in camellia seed oil. At the same time, it also provides a valuable reference for ensuring the edible safety of camellia seed oil in Chinese food heating habits. Full article

Sewing is the major contributor to the manufacturing of protection wear for the survival of early human civilization against extreme weather conditions. Mechanized sewing witnessed developments during the middle of the 19th century, and tedious handwork was replaced by sewing machines. Despite the modernization of sewing machine technologies, speed, material thicknesses, automation, and the introduction of AI in sewing, there is a longstanding problem of heat loss along stitch lines. The sewing material is compressed by the sewing thread, and this compression results in a bridge between the human body and the external cold environment. Garment technologists identify this problem and due to the lack of any technological solution, the problem is solved through complex material handling methods. A new sewing technological solution has been developed to solve this problem, called spacer stitching, which addresses the problem of compression along stitch lines. Two baffled jackets with sewn-through methods are prepared, one with the spacer stitching technology and the other with conventional sewing. Thermal resistance and insulation efficiency are evaluated using the Thermetrics thermal manikin “Sonny” under dynamic (walking) conditions to analyze the thermal resistance difference between the two types of sewing methods as well as the effects of motion on insulation. The results reveal that the jacket made with spacer stitching demonstrates significantly higher thermal resistance and enhanced wearer comfort compared to that produced using conventional methods. Additionally, variations in thermal resistance are observed across different zones of the thermal manikin. These findings highlight the potential of spacer stitching to improve thermal insulation and revolutionize high-performance outerwear design. Full article

In this work, the indoor thermal environment and indoor air quality of rural houses in Northern China were investigated in detail. The current heating situation in rural areas, the causes of indoor air pollution, and the indoor ventilation habits of residents were analyzed. The indoor thermal environment and indoor air quality were improved by upgrading the thermal insulation of the rural housing envelope and installing indoor ventilation systems with heat recovery, leading to an average indoor temperature increase of 6 °C. The Predicted Mean Vote reached approximately 1.0, so the human body heat sensation was more moderate. The air age was greatly reduced, and the indoor air quality was significantly improved. The Predicted Percentage of Dissatisfied dramatically decreased to 15%. Thus, when focusing on heat source renovation in rural areas, priority should be given to improving the energy efficiency of buildings, especially the building envelope insulation performance. Ventilation and air exchange systems with heat recovery are inexpensive and effective, and they are suitable for rural dwellings where the temperatures are not as high as they should be but where the indoor air quality is poor and ventilation is urgently needed. Full article

When developing fabrics for applications in which evaporative cooling and drying play an important role, e.g., sports or occupational applications, the drying performance of fabrics is commonly determined using fast and easy-to-perform benchmark methods. The measurement conditions in these methods, however, differ significantly from the drying conditions on the human body surface, where drying is obstructed on one side of the fabric through contact with the skin and at the same time enhanced due to contact with the heated surface (skin). The aims of this study were to understand and quantify the fabric drying process at the skin interface considering these real-use effects based on tests applying two-sided drying, one-sided drying, one-sided drying on a heated surface, and one-sided drying on a heated surface in the stretched state, and to relate these to existing standard methods. The findings showed that contact with a solid heated surface such as the skin and the stretched state of the fabric both make a significant contribution (p < 0.05) to the drying rate compared to two-sided drying in standard climatic conditions. The corresponding drying rates observed for a range of typical fabrics used in leisure and sports as a first layer next to the skin were found to be 1.6 (±0.2), 1.1 (±0.2), 7.9 (±2.1), and 10.6 (±0.8) g/m² min for two-sided drying, one-sided drying, one-sided drying on a heated surface, and one-sided drying on a heated surface in the stretched state, respectively. These findings are of great importance for human thermal modelling, including clothing models, where the drying process significantly contributes to the heat and mass transfer in the skin–clothing–environment system. Full article

The climate of the Hungarian lowland (Central European region, Pannonian Plain area) can be characterized by Köppen’s Cfb climate formula (C—warm temperate, f—no seasonality in the annual course of precipitation, b—warm summer). This characterization does not provide information about the human thermal load and thermal perception. The aim of this work is to fill this gap. We focused on the morning, clear-sky periods of the day, when the heat supply provided by the weather is the lowest. The human thermal load of clear-sky mornings was estimated using the new clothing thermal resistance–operative temperature (r_cl–T_o) model. In contrast to IREQ-type (Required Clothing Insulation) models, this model parametrizes the total metabolic heat flux density (M) as a function of anthropometric data (body mass, height, sex, age). In the simulations, the selected persons walk (M values range between 135 and 170 W m⁻²) or stand (M values range between 84 and 96 W m⁻²), while their body mass index (BMI) varies between 25 and 37 kg m⁻². The following main results should be highlighted: (1) Human activity has a significant impact on r_cl; it ranges between 0 and 3.5 clo during walking and between 0 and 6.7 clo during standing. (2) The interpersonal variability of r_cl increases with increasing heat deficit accordingly; in the case of a walking person, it is around 1 clo in the largest heat deficits and around 0 clo in the smallest heat deficits. Since, in general, anticyclones increase the heat deficit while cyclones reduce it, extreme thermal loads are associated with anticyclones. It should be mentioned that the interpersonal variability of the human thermal load cannot be analyzed without databases containing people’s anthropometric data. Full article

The polemics of idol worship in John Capgrave’s Life of Saint Katherine of Alexandria have been interpreted by previous scholars as either the author’s engagement with the Lollard image controversy or a political critique of Henry VI. This essay, however, shifts the focus from Katherine and her iconoclasm to the concept of divine iconoclasm, defined here not only as the divinely sanctioned or divinely motivated destruction of religious images but also as God’s direct intervention to dismantle false representations and correct human perceptions of the divine. It further argues that Capgrave’s Life redefines sacred space as primarily constructed through light, emphasizing its immateriality and exposing the saint’s physical limitations. In these scenarios, divine iconoclasm emerges as a constructive force that resolves the tension between the secular and the sacred. Moreover, Christ’s celestial manipulation of the vision of sacred space and the relationship between body and space—encouraging confidence while discouraging self-inflation—serves as a model for how a monarch should inspire both love and fear. In this way, Capgrave’s Mirrors for Princes is embedded within his hagiography, where the image debate features prominently, addressing the heated political and theological controversies of his time. By combining these elements, the essay bridges two strands of criticism that have previously treated the political and theological dimensions of the text separately. Full article

This study analyzes biometeorological conditions during summer heat events in 11 cities located in different regions of Poland in the summer months from 2020 to 2024. Heat days (defined as days with a maximum temperature exceeding 30 °C) and heatwaves (defined as at least three consecutive days with a maximum temperature above 30 °C) were identified. Biometeorological conditions were assessed based on the Universal Thermal Climate Index (UTCI) and heart rate (HR), assuming a metabolic heat production of 135 W∙m⁻² for an adult human. The indices were calculated using the BioKlima 2.6 software. The findings reveal that all cities experienced significant thermal stress during heat events. The maximum UTCI values during heat days indicated strong and very strong heat stress. During the most intense heatwaves, assessed using the Heat Wave Severity (HWS) index, these categories of heat stress occurred 20–30% of the time. Simultaneously, the mean daily heart rates exceeded the warning threshold of 90 beats per minute. Differences in biometeorological conditions were found between urban centers and places located outside the center, where strong heat conditions occurred less frequently. The results indicate that biometeorological conditions imposing thermal stress on the human body were present in all Polish cities during the analyzed five-year period. In Warszawa, Wrocław, and Rzeszów, heatwaves and heat stress occurred annually. Full article

Textile structures with ohmic (Joule) heating capability are frequently used for personal thermal management by tuning fluctuations in human body temperature that arise due to climatic changes or for medical applications as electrotherapy. They are constructed from electrically conductive textile structures prepared in different ways, e.g., from metallic yarns, conductive polymers, conductive coatings, etc. In comparison with other types of flexible ohmic heaters, these structures should be corrosion resistant, air permeable, and comfortable. They should not loose ohmic heating efficiency due to frequent intensive washing and maintenance. In this study, the basic electrical properties of a conductive fabric composed of a polyester/cotton fiber mixture and a small amount of fine stainless-steel staple fibers (SS) were evaluated and predicted. Even though the basic conductive component of SS fibers is iron and its electrical characteristics obey Ohm’s law, the electrical behavior of the prepared fabric was highly nonlinear, resembling a more complex response than that of a classical conductor. The non-linear behavior was probably due to non-ideal, poorly defined random interfaces between individual short SS fibers. A significant time–dynamics relationship was also shown. Using the Stefan–Boltzmann law describing radiation power, we demonstrated that it is possible to predict surface temperature due to the ohmic heating of a fabric related to the input electrical power. Significant local temperature variations in the heated hybrid fabric in both main directions (warp and weft) were identified. Full article

Nanotechnology refers to the science that modulates molecules to the nanoscale dimension. Nanomedicine, i.e., the utilization of nanotechnology for diagnosing and treating several disorders, is a subject of ongoing research. The concept behind nanomedicine in diabetes mellitus (DM) treatment stems from the need to ameliorate absorption and distribution of antidiabetic therapies in order to overcome barriers, namely the pH throughout the gastrointestinal tract, the gut microbiota, the temperature/heat and the difficulties in the incorporation of drugs into the cells. Thus, the scope of nanomedicine is particularly challenging and demanding, considering the fact that the human body is a perpetually changing entity in order to achieve homeostasis. In this review, we will delve into various nanoparticles that are being studied in terms of antidiabetic treatment, their pros and cons and the expanding knowledge in this field. Despite the fact that nanomedicine seems to be very promising, there are still many gaps in our understanding of how the human body addresses its utilization. Moreover, its high costs, along with an as-yet unclear safety profile, remain a significant barrier to widespread adoption. In this review, we will describe both phytochemicals and chemical compounds that nanomedicine seeks to exploit in order to pave the way for a more efficacious and comprehensive management of diabetes mellitus. Full article

Acrylamide is a class 2A carcinogen with neurotoxicity and genotoxicity. In addition to industrial production, it is ubiquitous in high-temperature heated high-carbohydrate foods. Numerous studies have confirmed the toxicity of ACR on reproduction. Implantation and decidualization are crucial processes during the establishment of pregnancy in rodents and humans. However, its effect on uterine implantation and decidualization remains poorly understood. The objective of this study is to elucidate the mechanism by which ACR affects implantation and decidualization in mice. ACR is exposed in the daily drinking water of female mice, and the dose is calculated according to the body weight of the mice. After 3 months of administration at concentrations of 0, 20, and 30 mg ACR/kg/d, female mice are mated with male mice to induce pregnancy. Compared to the control group, ACR treatment significantly reduces the number of embryo implantations and litter size. ACR treatment leads to abnormal expression of endometrial receptivity-related molecules in the luminal epithelium on day 4 of pregnancy, including a decrease in p-STAT3 level and an increase in MUC1 and MSX1 levels. The level of decidualization-related molecules is obviously downregulated by ACR. Furthermore, ACR treatment results in abnormality of oxidative stress- and ferroptosis-related protein levels at the implantation site on day 5. In conclusion, acrylamide can impair mouse implantation and decidualization by disrupting oxidative stress and ferroptosis. Full article

In this paper, a new TaMoNbTiZr multielement alloy has been designed, using chemical elements that exhibit extremely low bio-toxicity for the human body. The alloy was obtained by melting in vacuum arc remelting (VAR) equipment MRF ABJ 900 from high-purity chemical elements (99.5%) as mini-ingots having about 40 g weight each. The biocompatible alloys underwent changes in hardness after performing the annealing at 900 °C for 2 h, followed by cooling in water. The new alloy had an average hardness in the cast state of 545 HV0.5, and after heat treatment, it hardened to a value of 984 HV0.5, over 40% higher than that in the casting state, which ensures a longer working period. To use them as materials for medical instruments, their biocompatibility was highlighted through specific laboratory tests. For this, mesenchymal stem cells isolated from bone tissue and a human fibroblast cell line were cultured in vitro on the TaMoNbTiZr alloy’s surface. The biocompatibility of the alloy with the biological environment was evaluated by analyzing cell viability, adhesion, and proliferation, and in parallel, the cytolysis effects manifested by the increase in lactate dehydrogenase activity in the culture media were analyzed. Full article

Fiber-shaped electrical heaters with high flexibility and excellent adaptability make an ideal candidate for the application of wearable electronics but still suffer from low strength and poor durability. Herein, an all-in-one Joule-heating fiber capable of outstanding mechanical properties, good heating efficiency, and long-term stability is reported by using polymer-assisted metal deposition to firmly coat Cu nanoparticles on high-performance liquid crystal polymer (LCP) fibers. Taking advantage of LCP, the resultant fibers exhibit a satisfying temperature threshold (up to 200 °C) and immense strength (2.94 GPa). By virtue of dense and continuous Cu film, these fibers show low electrical resistance (5.51 Ω/cm) and an ultrafast response rate (12.6 °C·s⁻¹) at low supplied voltages (0.5–3.5 V). Benefiting from the levodopa/polyethyleneimine interface design, such fibers maintain nearly constant resistance after repeatable bending, folding, and even washing (50 cycles). Based on the above-mentioned merits, a wearable patch with a Joule-heating function is knitted by using as-made fibers to offer therapeutic benefits for human body joints. This work demonstrates prospective potential for enriching the challenging applications of fiber-shaped electrical heating systems. Full article

Amidst the rapid global urbanization and economic integration, coastal cities have undergone significant changes in urban spatial patterns. These changes have further worsened the complex urban thermal environment, making it crucial to study the interaction between human-driven development and natural climate systems. To address the insufficient quantification of marine elements in the urban planning of subtropical coastal zones, this study takes Xiamen, a typical deep-water port city, as an example to construct a spatial analysis framework integrating marine boundary layer parameters. This research employs interpolation simulation, atmospheric correction, and other techniques to simulate the inversion of land use and Landsat 8 data, deriving urban morphological elements and Land Surface Temperature (LST) data. These data were then assigned to 500 m grids for analysis. A bivariate spatial auto-correlation model was applied to examine the relationship between urban carbon emission and LST. The study area was categorized based on the influence of marine factors, and the spatial relationships between urban morphological elements and LST were analyzed using a multiscale geographically weighted regression model. Three Xiamen-specific discoveries emerged: (1) the marine exerts a significant thermal mitigation effect on the city, with an average influence range of 7.94 km; (2) the relationship between urban morphology and the thermal environment exhibits notable spatial heterogeneity across different regions; and (3) to mitigate urban thermal environments, connected green corridors should be established in the southern coastal areas of outer districts in regions significantly influenced by the ocean. In areas with less marine influence, spatial complexity should be introduced by disrupting relatively intact blue–green spaces, while regions unaffected by the ocean should focus on increasing green spaces and reducing impervious surfaces and water bodies. These findings directly inform Xiamen’s 2035 Master Plan for combating heat island effects in coastal special economic zones, providing transferable metrics for similar maritime cities. Full article