Search Results (1,489)

The rapid rise of short-form video platforms such as TikTok and Instagram Reels has transformed digital engagement by promoting fragmented, high-tempo swiping behaviors and intense sensory stimulation. While these platforms dominate daily use, their impact on higher-order cognition remains underexplored. This study provides preliminary behavioral experimental evidence that even brief exposure to short-form video environments may be associated with reduced cue-based task preparation, a specific subcomponent of proactive cognitive flexibility. In a randomized between-subjects design, participants (N = 72) viewed either 30 min of TikTok-style content, a neutral documentary, or no video (passive control), followed by a task-switching paradigm with manipulated cue–target intervals (CTIs). As expected, the documentary and control group exhibited significant preparation benefits at longer CTIs, reflected in reduced switching costs—consistent with effective anticipatory task-set updating. In contrast, the short video group failed to leverage extended preparation time, indicating a selective disruption of goal-driven processing. Notably, performance at short CTIs did not differ across groups, reinforcing the interpretation that reactive control remained intact, while proactive preparation was selectively impaired. These findings link habitual “swiping” to disrupted task-switching efficiency—a phenomenon summarized as swiping disrupts switching. These findings suggest that short-form video exposure may temporarily bias attentional regulation toward stimulus-driven reactivity, thereby undermining anticipatory cognitive control. Given the widespread use of short-form video platforms—especially among young adults—these results underscore the need to better understand how media design features interact with cognitive control systems. Full article

Background: Fixed-dose combinations have advanced in many therapeutic areas, including otorhinolaryngology, where hearing disorders are increasingly prevalent. Objectives: The present study focuses on developing and evaluating a new capsule combining nicergoline (NIC), piracetam (PIR), and hawthorn extract (HE) for the management of sensorineural hearing loss. Methods: The first phase methodology comprised preformulation studies (DSC, FTIR, and PXRD) to assess compatibility among active substances and excipients. Subsequently, four formulations were prepared and tested for flowability, dissolution behavior in acidic and neutral media, and stability under oxidative, thermal, and photolytic stress. Quantification of the active substances and flavonoids was performed using validated spectrophotometric and HPLC-UV methods. Results: Among the tested variants, the F1 formulation (4.5 mg NIC, 200 mg PIR, 50 mg HE, 2.5 mg magnesium stearate, 2.5 mg sodium starch glycolate, and 240.5 mg monohydrate lactose per capsule) displayed optimal technological properties, superior dissolution in acidic media, and was further selected for evaluation. The antioxidant activity of the formulation was confirmed through the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, Trolox Equivalent Antioxidant Capacity (TEAC), and iron chelation tests, and was primarily attributed to the flavonoid content of the HE. Acute toxicity tests in mice and rats indicated a high safety margin (LD₅₀ > 2500 mg/kg), while ototoxicity assessments showed no adverse effects on auditory function. Conclusions: The developed formulation displayed good stability, safety, and therapeutic potential, while the applied workflow could represent a model for the development of future fixed-dose combinations. Full article

Background: The purpose of this study was to evaluate Achilles tendon ruptures (ATR) in NHL players and the effects on return to play and player performance metrics. The incidence, mechanism of injury, management strategy, return to play (RTP), and post-injury were assessed from official online sports databases. Methods: A retrospective review of NHL players who sustained a partial or complete tear of the Achilles tendon from 2008 to 2024 was performed. Data were collected from NHL injury databases and media reports, and included player demographics, injury mechanism, treatment, and post-injury performance metrics. A Wilcoxon signed rank test was used to compare pre-injury and post-injury performance metrics, with significance set at p < 0.05. Results: Here, 15 NHL players with a mean age of 27.8 years were identified, with a prevalence rate of 0.125 injuries per 10,000 athletic exposures. Overall, 73.3% of ATRs were non-contact in nature, with 60.0% of ATRs occurring during off-season training. Fourteen players were managed with non-operative treatment, with no re-ruptures reported. The RTP rate was 93.3%, with players missing a mean number of 45.7 games. However, there was a deterioration in post-injury performance metrics, including games played per season, plus/minus rating, and time on ice per game post-injury. Conclusions: This study found that Achilles tendon ruptures are an uncommon injury in NHL players, with a prevalence rate of 0.125 injuries per 10,000 athletic exposures. A high RTP rate of 93.3% was observed in this cohort. However, there was a deterioration in post-injury performance metrics, including games played per season, plus/minus rating, and time on ice per game post-injury, highlighting the potential devastating sequelae of ATRs in elite NHL athletes. Full article

The Research Integrity Risk Index (RI²), introduced as a tool to identify universities at risk of compromised research integrity, adopts an overly reductive methodology by combining retraction rates and delisted journal proportions into a single, equally weighted composite score. While its stated aim is to promote accountability, this commentary critiques the RI² index for its flawed assumptions, lack of empirical validation, and disproportionate penalization of institutions in low- and middle-income countries. We examine how RI² misinterprets retractions, misuses delisting data, and fails to account for diverse academic publishing environments, particularly in Indonesia, where many high-performing universities are unfairly categorized as “high risk” or “red flag.” The index’s uncritical reliance on opaque delisting decisions, combined with its fixed equal-weighting formula, produces volatile and context-insensitive scores that do not accurately reflect the presence or severity of research misconduct. Moreover, RI² has gained significant media attention and policy influence despite being based on an unreviewed preprint, with no transparent mechanism for institutional rebuttal or contextual adjustment. By comparing RI² classifications with established benchmarks such as the Scimago Institution Rankings and drawing from lessons in global development metrics, we argue that RI², although conceptually innovative, should remain an exploratory framework. It requires rigorous scientific validation before being adopted as a global standard. We also propose flexible weighting schemes, regional calibration, and transparent engagement processes to improve the fairness and reliability of institutional research integrity assessments. Full article

The problem of protecting 7075 Al alloy trekking poles from corrosion in complex outdoor environments was addressed using a composite conversion coating system. This system comprised Na₂MoO₄, NaF, CoSO₄·7H₂O, ethylenediaminetetraacetic acid-2Na, and H₂(TiF₆). The influences of this system on the properties of the coating layer were systematically studied by adjusting the pH of the coating solution. The conversion temperature and pH were the pivotal parameters influencing the formation of the conversion coating. The pH substantially influenced the compactness of the coating layer, acting as a regulatory agent of the coating kinetics. When the conversion temperature and pH were set to 40 °C and 3.8, respectively, the prepared coating layer displayed optimal performance in terms of compactness and protective properties. Therefore, this parameter combination favours the synthesis of high-performance conversion coatings. Microscopy confirmed the formation of a continuous, dense composite oxide film structure under these conditions, effectively blocking erosion in corrosive media. Furthermore, the optimised process led to substantial enhancements in the environmental adaptabilities and service lives of the components of trekking poles, thus establishing a theoretical foundation and technical reference for use in the surface protection of outdoor equipment. Full article

Over the last few decades, the growing demand for sustainable resources has made biopolymers increasingly popular, as they offer an eco-friendly alternative to conventional synthetic polymers, which are often associated with environmental issues such as the formation of microplastics and toxic substances. Functionalization of biomaterials involves modifying their physical, chemical, or biological properties to improve their performance for specific applications. Cellulose and bacterial cellulose are biopolymers of interest, due to the plethora of hydroxyl groups, their high surface area, and high porosity, which makes them ideal candidates for several applications. However, there are applications, which require precise control of their wetting properties. In this review, we present the most effective fabrication methods for modifying both the morphology and the chemical properties of cellulose and bacterial cellulose, towards the realization of superhydrophobic bacterial cellulose films and surfaces. Such materials can find a wide variety of applications, yet in this review we target and discuss applications deriving from the wettability control, such as antibacterial surfaces, wound healing films, and separation media. Full article

This work expands the processing window of the laser powder bed fusion (LPBF) processing of WE43 magnesium alloy by evaluating laser powers and scanning speeds up to 400 W and 1200 mm/s, and their effect on densification, microstructure, and electrochemical performance. Relative density of 99.9% was achieved for 300 W and 800 mm/s, showing that the use of high laser power is not a limitation for the manufacturing of Mg alloys, as has been usually considered. Microstructural characterisation revealed refined grains and the presence of RE-rich intermetallic particles, while microhardness increased with height due to thermal gradients. Electrochemical testing in 3.5 wt.% NaCl solution, a more aggressive media than those already used, indicated that the corrosion of samples with density values below 99% is conditioned by the porosity; however, above this value, in the WE43, the corrosion evolution is more related to the microstructure of the samples, according to electrochemical evaluation. This study demonstrates the viability of high-energy LPBF processing for WE43, offering optimised mechanical and corrosion properties for biomedical and structural applications. Full article

Koshu wine, produced from the indigenous Japanese grape Vitis vinifera L. cv. Koshu exhibits a lower pH than other white wines, hindering malolactic fermentation (MLF) by lactic acid bacteria (LAB). Here, we aimed to isolate LAB strains capable of performing MLF under these challenging conditions to improve wine quality. Sixty-four Oenococcus oeni and one Lactobacillus hilgardii strain were isolated from Koshu grapes and wines that had undergone spontaneous MLF. MLF activity was assessed under varying pH, SO₂, and ethanol conditions in modified basal medium (BM) and Koshu model wine media. Expression of stress-related genes was analyzed using real-time PCR. Carbon source utilization was evaluated via API 50CH assays. All isolates degraded malic acid and produced lactic acid at 15 °C and pH 3.2 in BM without reducing sugars. Seven strains, all identified as O. oeni, demonstrated MLF activity at pH 3.0 in modified BM lacking added reducing sugars or tomato juice. Six wine-derived strains tolerated up to 12% ethanol, whereas the grape-derived strain was inhibited at 10%. In a synthetic Koshu wine model (13% ethanol, pH 3.0), wine-derived isolates exhibited higher MLF activity than commercial starter strains. In high-performing strains, mleA was upregulated, and most isolates preferred fructose, arabinose, and ribose over glucose. These findings suggest that indigenous O. oeni strains from Koshu wine possess unique stress tolerance and metabolic traits, making them promising candidates for region-specific MLF starter cultures that could enhance Koshu wine quality and terroir expression. Full article

This study analyzed the heavy metal tolerance and chromium reduction and the potential of plant growth to promote Rhizobium sp. OS-1. By genetic makeup, the Rhizobium strain is nitrogen-fixing and phosphate-solubilizing in metal-contaminated agricultural soil. Among the Rhizobium group, bacterial strain OS-1 showed a significant tolerance to heavy metals, particularly chromium (900 µg/mL), zinc (700 µg/mL), and copper. In the initial investigation, the bacteria strains were morphologically short-rod, Gram-negative, appeared as light pink colonies on media plates, and were biochemically positive for catalase reaction and the ability to ferment glucose, sucrose, and mannitol. Further, bacterial genomic DNA was isolated and amplified with the 16SrRNA gene and sequencing; the obtained 16S rRNA sequence achieved accession no. HE663761.1 from the NCBI GenBank, and it was confirmed that the strain belongs to the Rhizobium genus by phylogenetic analysis. The strain’s performance was best for high hexavalent chromium [Cr(VI)] reduction at 7–8 pH and a temperature of 30 °C, resulting in a total decrease in 96 h. Additionally, the adsorption isotherm Freundlich and Langmuir models fit best for this study, revealing a large biosorption capacity, with Cr(VI) having the highest affinity. Further bacterial chromium reduction was confirmed by an enzymatic test of nitro reductase and chromate reductase activity in bacterial extract. Further, from the metal biosorption study, an Artificial Neural Network (ANN) model was built to assess the metal reduction capability, considering the variables of pH, temperature, incubation duration, and initial metal concentration. The model attained an excellent expected accuracy (R² > 0.90). With these features, this bacterial strain is excellent for bioremediation and use for industrial purposes and agricultural sustainability in metal-contaminated agricultural fields. Full article

Background/Objectives: The emergence of antimicrobial resistance represents a critical global health threat, requiring the discovery of novel bioactive compounds. Fungi from Amazonian biodiversity are promising sources of secondary metabolites with potential antimicrobial activity. This study aimed to investigate the production of antimicrobial compounds by two Amazonian fungal strains using the OSMAC (One Strain–Many Compounds) approach. Methods: Two fungal strains, Talaromyces pinophilus CCM-UEA-F0414 and Penicillium paxilli CCM-UEA-F0591, were cultivated under five distinct culture media to modulate secondary metabolite production. Ethyl acetate extracts were prepared and evaluated for antimicrobial activity against Gram-positive and Gram-negative bacteria, as well as pathogenic yeasts. Chemical characterization was performed using thin-layer chromatography (TLC), Fourier Transform Infrared Spectroscopy (FTIR), Ultraviolet–Visible (UV-Vis) spectroscopy, and Ultra-High-Performance Liquid Chromatography with Diode Array Detection (uHPLC-DAD). Results: The extracts exhibited significant antimicrobial activity, with minimum inhibitory concentrations (MICs) ranging from 78 to 5000 µg/mL. Chemical analyses revealed the presence of phenolic compounds, particularly caffeic and chlorogenic acids. Variations in the culture media substantially affected both the metabolite profiles and antimicrobial efficacy of the extracts. Conclusions: The OSMAC strategy effectively enhanced the metabolic diversity of the Amazonian fungal strains, leading to the production of bioactive metabolites with antimicrobial potential. These findings support the importance of optimizing culture conditions to unlock the biosynthetic capacity of Amazonian fungi as promising sources of antimicrobial agents. Full article

As multimedia technologies evolve, digital images have become increasingly prevalent across various fields, highlighting an urgent demand for robust image privacy and security mechanisms. However, existing image encryption algorithms (IEAs) still face limitations in balancing strong security, real-time performance, and computational efficiency. Therefore, we proposes a new IEA that integrates an improved chaotic map (Tent map), an improved Zigzag transform, and dynamic DNA coding. Firstly, a pseudo-wavelet transform (PWT) is applied to plain images to produce four sub-images $I_1$, $I_2$, $I_3$, and $I_4$. Secondly, the improved Zigzag transform and its three variants are used to rearrange the sub-image $I_1$, and then the scrambled sub-image is diffused using XOR operation. Thirdly, an inverse pseudo-wavelet transform (IPWT) is employed on the four sub-images to reconstruct the image, and then the reconstructed image is encoded into a DNA sequence utilizing dynamic DNA encoding. Finally, the DNA sequence is scrambled and diffused employing DNA-level index scrambling and dynamic DNA operations. The experimental results and performance evaluations, including chaotic performance evaluation and comprehensive security analysis, demonstrate that our IEA achieves high key sensitivity, low correlation, excellent entropy, and strong resistance to common attacks. This highlights its potential for deployment in real-time, high-security image cryptosystems, especially in fields such as medical image security and social media privacy. Full article

Tribological processes in extreme environments pose serious material challenges, requiring coatings that resist both wear and corrosion. This review summarizes recent advances in protective coatings engineered for extreme environments such as high temperatures, chemically aggressive media, and high-pressure and abrasive domains, as well as cryogenic and space applications. A comprehensive overview of promising coating materials is provided, including ceramic-based coatings, metallic and alloy coatings, and polymer and composite systems, as well as nanostructured and multilayered architectures. These materials are deployed using advanced coating technologies such as thermal spraying (plasma spray, high-velocity oxygen fuel (HVOF), and cold spray), chemical and physical vapor deposition (CVD and PVD), electrochemical methods (electrodeposition), additive manufacturing, and in situ coating approaches. Key degradation mechanisms such as adhesive and abrasive wear, oxidation, hot corrosion, stress corrosion cracking, and tribocorrosion are examined with coating performance. The review also explores application-specific needs in aerospace, marine, energy, biomedical, and mining sectors operating in aggressive physiological environments. Emerging trends in the field are highlighted, including self-healing and smart coatings, environmentally friendly coating technologies, functionally graded and nanostructured coatings, and the integration of machine learning in coating design and optimization. Finally, the review addresses broader considerations such as scalability, cost-effectiveness, long-term durability, maintenance requirements, and environmental regulations. This comprehensive analysis aims to synthesize current knowledge while identifying future directions for innovation in protective coatings for extreme environments. Full article

Ammonium (NH₄⁺) toxicity impairs plant growth, but nitrate (NO₃⁻) can mitigate this effect through unresolved mechanisms. Using leaf δ¹³C values (photosynthetic capacity) and a bidirectional ¹⁵N tracer (NH₄⁺ assimilation efficiency and source utilization), this study investigated these mechanisms in 35-day-old Orychophragmus violaceus plantlets grown in modified Murashige and Skoog media under varying NH₄⁺:NO₃⁻ ratios. ¹⁵N isotope fractionation during NH₄⁺ (same fixed 20 mM NH₄Cl) assimilation decreased with increasing NO₃⁻ supply (10, 20, and 40 mM NaNO₃). Under 20 mM NH₄⁺ (δ¹⁵N = −2.64‰) at two ¹⁵NO₃⁻-labels (δ¹⁵N-NO₃⁻ = 8.08‰, low ¹⁵N, L) and (δ¹⁵N-NO₃⁻ = 22.67‰, high ¹⁵N, H), increasing NO₃⁻ concentrations enhanced NO₃⁻ assimilation, alleviating acidic stress from NH₄⁺ and improving photosynthesis. Higher NO₃⁻ levels also increased NH₄⁺ utilization efficiency, reducing futile NH₄⁺ cycling and decreasing associated ¹⁵N fractionation during assimilation. Our results demonstrate that NO₃⁻ alleviates NH₄⁺ toxicity primarily by enhancing photosynthetic performance and optimizing NH₄⁺ utilization efficiency. Full article

Background/Objectives: Hot-melt extrusion (HME) has gained prominence for the manufacture of sustained-release oral dosage forms, yet the application of wax-based matrices and their resilience to alcohol-induced dose dumping (AIDD) remains underexplored. This study aimed to develop and characterise wax-based sustained-release felodipine formulations, with a particular focus on excipient functionality and robustness against AIDD. Methods: Felodipine sustained-release formulations were prepared via HME using Syncrowax HGLC as a thermally processable wax matrix. Microcrystalline cellulose (MCC) and lactose monohydrate were incorporated as functional fillers and processing aids. The influence of wax content and filler type on mechanical properties, wettability, and drug release behaviour was systematically evaluated. Ethanol susceptibility testing was conducted under simulated co-ingestion conditions (4%, 20%, and 40% v/v ethanol) to assess AIDD risk. Results: MCC-containing tablets demonstrated superior sustained-release characteristics over 24 h, showing better wettability and disintegration. In contrast, tablets formulated with lactose monohydrate remained structurally intact during dissolution, overly restricting drug release. This limitation was effectively addressed through granulation, where reduced particle size significantly improved surface accessibility, with 0.5–1 mm granules achieving a satisfactory release profile. Ethanol susceptibility testing revealed divergent behaviours between the two filler systems. Unexpectedly, MCC-containing tablets showed suppressed drug release in ethanolic media, likely resulting from inhibitory effect of ethanol on filler swelling and disintegration. Conversely, formulations containing lactose monohydrate retained their release performance in up to 20% v/v ethanol, with only high concentrations (40% v/v) compromising matrix drug-retaining functionality and leading to remarkably increased drug release. Conclusions: This study highlights the pivotal role of excipient type and constitutional ratios in engineering wax-based sustained-release formulations. It further contributes to the understanding of AIDD risk through in vitro assessment and offers a rational design strategy for robust, alcohol-resistant oral delivery systems for felodipine. Full article

In this work, bio-based thermoelectric composites were developed using acrylated epoxidized soybean oil (AESO) as the polymer matrix and bismuth telluride (Bi₂Te₃) as the thermoelectric filler. The materials were formulated for both UV-curing and thermal-curing processes, with a focus on Digital Light Processing (DLP) 3D printing. Although UV curing proved ineffective at high filler concentrations due to the light opacity of Bi₂Te₃, thermal curing enabled the fabrication of stable, homogeneously dispersed composites. The samples were thoroughly characterized through rheology, FTIR, TGA, XRD, SEM, and density measurements. Thermoelectric performance was assessed under a 70 °C temperature gradient, with Seebeck coefficients reaching up to 51 µV/K. Accelerated chemical degradation studies in basic media confirmed the degradability of the matrix. The results demonstrate the feasibility of combining additive manufacturing with sustainable materials for low-power thermoelectric energy harvesting applications. Full article