Search Results (4)

Agrivoltaic (APV) systems co-locate agricultural production and photovoltaic (PV) electricity generation on the same land to maximize land use efficiency. This study proposes an integrated assessment framework that jointly evaluates crop yield and electricity generation in APV systems. Unlike many previous APV studies that estimated crop responses from empirical PAR–photosynthesis relationships, this framework explicitly couples a process-based rice growth model (DSSAT-CERES-Rice) with irradiance and PV performance simulations (Honeybee-Radiance and PVlib) in a single workflow. The five-stage framework comprises (i) meteorological data acquisition and processing; (ii) 3D modeling in Rhinoceros; (iii) calculation of module front and rear irradiance and crop height irradiance using Honeybee; (iv) crop yield calculation with DSSAT; and (v) electricity generation calculation with PVlib. Using bifacial PV modules under rice cultivation in Gochang, Jeollabuk-do (Republic of Korea), simulations were performed with ground coverage ratio (GCR) and PV array azimuth as key design variables. As GCR increased from 20% to 50%, crop yield reduction (CYR) rose from 12% to 33%, while land equivalent ratio (LER) increased from 128% to 158%. To keep CYR within the domestic guideline of 20% while maximizing land use, designs with GCR ≤ 30% were found to be appropriate. At GCR 30%, CYR of 17–18% and LER of 139–140% were achieved, securing a balance between agricultural productivity and electricity generation. Although PV array azimuth had a limited impact on crop yield and electricity generation, southeast or southwest orientations showed more uniform irradiance distributions over the field than due south. A simple economic assessment was also conducted for the study site to compare total annual net income from rice and PV across GCR scenarios. The proposed framework can be applied to other crops and sites and supports design-stage decisions that jointly consider crop yield, electricity generation, and economic viability. Full article

Agrivoltaics, an emerging approach that integrates solar energy generation with agricultural production, offers an effective solution to land-use conflicts by enabling the simultaneous production of clean energy and crops. However, the shading effect of photovoltaic (PV) modules significantly alters both the quantity and distribution of light within crop canopies, creating challenges in balancing power output with crop light requirements. This study employs the Rhino–Grasshopper parametric modeling platform, combined with Ladybug and PVsyst, to conduct batch simulations of 44 configuration schemes for an agrivoltaic system in Lianyungang, Jiangsu Province. Annual simulations of the light environment and energy generation were performed, and model accuracy was validated through field measurements using Daily Light Integral (DLI), light uniformity (coefficient of variation, CV), and annual energy yield as key indicators to assess the effects of different module layouts and tilt angles. The results reveal pronounced seasonal variations in the system’s light environment. The tilt angle exhibits a seasonal reversal pattern: higher tilt angles in winter and spring substantially reduce DLI (up to a 44% decrease under high ground coverage ratio, GCR, conditions), whereas moderate tilt angles in summer and autumn enhance light transmission, with low-GCR layouts enabling DLI values exceeding 30.6 mol·m⁻²·d⁻¹. Light uniformity was highest in the dual-row layout with 0.2 m spacing, maintaining a CV between 0.16 and 0.18. Energy yield peaked at a 30 tilt angle, showing a parabolic response pattern. Overall, this study proposes a photovoltaic module layout design method based on seasonal light distribution characteristics and the balance between agricultural and energy production goals. This method provides a scientific basis for structural layout planning and planting-model design in agrivoltaic systems and contributes to improving light-energy utilization efficiency and agricultural output, thereby achieving synergistic benefits between photovoltaic power generation and crop production. Full article

Agrivoltaics have emerged as a promising solution to mitigate climate change effects as well as competition for land use between food and energy production. While previous studies have demonstrated the potential of agrivoltaic systems to enhance land productivity, limited research has focused on their impact on specific crops, particularly in organic processing tomatoes. In the present study, a two-year experiment was conducted in northwest Italy to assess the suitability of the agrivoltaic system on processing tomato yield and quality in the organic farming system. In the first growing season, the transplanting of tomato was carried out under the following light conditions: internal control (A1)—inside the tracker rows obtained by removing PV panels; extended agrivoltaic panels—shaded condition with an increased ground coverage ratio (GCR) of 41% (A2); and external control (FL)—full-light conditions outside the tracker rows. The second year of experimentation involved the transplanting of tomato under the following light conditions: internal control (B1); dynamic shading conditions that consist of solar panels in a vertical position until full fruit set (B2); standard agrivoltaic trackers (GCR = 13%, shaded conditions) (B3); and external control (FL). In 2023, the results showed that A2 achieved a total yield of only 24.5% lower than FL, with a marketable yield reduction of just 6.5%, indicating its potential to maintain productivity under shaded conditions. In 2024, B2 management increased marketable yield by 80.6% compared to FL, although it also led to a 46.2% increase in fruit affected by blossom end rot. Moreover, B2 improved nitrogen agronomic efficiency and fruit water productivity by 6.4% while also reducing the incidence of rotten fruit. Our findings highlight that moderate coverage (A2 and B2) can sustain high marketable yields and improve nitrogen use efficiency in different growing seasons. Full article

Water scarcity will increase in the world in the coming decades due to climate change, especially in areas that currently already have water scarcity, such as the Mediterranean area. In these areas, to guarantee water resources, systems’ sustainability is necessary to improve demand management and the development of non-conventional resources, such as treated wastewater reuse or seawater desalination. These non-conventional resources are highly energy-consuming; so, reducing energy costs is a key element in developing their use in different sectors, including agriculture. Combining photovoltaic solar energy with seawater desalination by reverse osmosis will reduce the cost of producing water to below 0.36 EUR/m³; so, this resource can be attractive for agriculture, as demonstrated in this work. The arrangement of bifacial solar modules in horizontal single-axis tracking systems increases the energy amount generated from the sun in one hour or more, improving the facility’s efficiency and reducing the desalinated water cost. The greater distance between the solar module lines, with a ground coverage ratio (GCR) = 0.3, makes for a better environmental integration of the facility and allows the development of agrovoltaic strategies, such as native flora planting and pollinator colonization. Full article