Search Results (29)

Lithium–sulfur batteries (LSBs), possessing excellent theoretical capacities, advanced theoretical energy densities, low cost, and nontoxicity, are one of the most promising energy storage battery systems. However, some issues, including poor conductivity of elemental S, the “shuttle effect” of high-order lithium polysulfides (LiPSs), and sluggish reaction kinetics, hinder the commercialization of LSBs. To solve these problems, various carbon-based aerogels with developed surface morphology, tunable pores, and electrical conductivity have been examined for immobilizing sulfur, mitigating its volume variation and enhancing its electrochemical kinetics. In this paper, an extensive generalization about the effective preparation methods of carbon-based aerogels comprising the combined method of carbonization with the gelation of precursors and drying processes (ambient pressure drying, freeze-drying, and supercritical drying) is proposed. And we summarize various carbon carbon-based aerogels, mainly including graphene aerogels (Gas) and carbon nanofiber (CNF) and carbon nanotube (CNT) aerogels as cathodes, separators, and interlayers in LSBs. In addition, the mechanism of action of carbon-based aerogels in LSBs is described. Finally, we conclude with an outlook section to provide some insights into the application of carbon-based aerogels in electrochemical energy storage devices. Based on the discussion and proposed recommendations, we provide more approaches on nanomaterials in high-performance liquid or state LSBs with high electrochemical performance in the future. Full article

Despite their outstanding thermal insulation and ultralight structure, silica aerogels suffer from inherent mechanical fragility, making the investigation of their mechanical behavior crucial for expanding their practical utility in advanced applications. To enhance their mechanical performance, this study introduces a dual-phase reinforcement strategy by anisotropically incorporating carbon nanotubes (CNTs) and graphene oxide (GO) sheets into the aerogel matrix. Using molecular dynamic simulations, we systematically investigate the tensile behavior and pore structure evolution of these hetero-structured composites. The results reveal a non-monotonic dependence of tensile strength on loading ratio, distinguishing three strain-dependent reinforcement regimes. High loading content (11.1%) significantly improves strength under low strain (0–26%), whereas low loading levels (1.8%) are more effective at preserving structural integrity under large strain (44–50%). Moderate loading (5.1%) yields balanced performance in intermediate regimes. While increasing carbon content reduces initial pore size by partially filling the framework, tensile deformation leads to interfacial debonding and the formation of larger pores due to CNT–GO hybrid structure interactions. This work elucidates a dual reinforcement mechanism—physical pore confinement and interfacial coupling—highlighting the critical role of nanostructure geometry in tuning strain-specific mechanical responses. The findings provide mechanistic insights into anisotropic nanocomposite behavior and offer guidance for designing robust porous materials for structural and functional applications. Full article

The extensive use of lithium-ion batteries and other energy storage systems (ESS) in recent years has resulted in a critical need for effective thermal management solutions that ensure safe and reliable operations. Carbon-based materials (C-bMs) are a promising candidate for addressing the thermal challenges in ESS due to their unique thermal, electrical, and structural properties. This article provides a concise overview of C-bM thermal management solutions for improved battery safety. The key thermal management requirements and failure modes associated with battery systems are highlighted, underscoring the importance of effective battery thermal management (BTM). Various forms of C-bMs, including graphite, graphene, carbon nanotubes, carbon foams, nanodiamonds, and graphdiyne, are examined for their potential applications in battery thermal management systems. The recent innovations and advancements in C-bM thermal management solutions, such as phase change composites, heat pipes, and thermal interface materials, are highlighted. Furthermore, the latest research trends focus mainly on the development of hybrid battery thermal management solutions, carbon-based aerogels, and complex C-bM structures with tailored thermal pathways for optimized thermal management. Most of the current innovations are still at the laboratory scale; hence, future research efforts will be focused on developing integrated multi-functional C-bMs, sustainable and scalable manufacturing techniques, self-healing C-bMs composites, intelligent C-bMs, and further explorations of uncommon C-bMs. These advancements are bound to enhance performance, sustainability, and application-specific adaptations for BTM. This article provides valuable insights for researchers, and stakeholders interested in leveraging C-bMs for BTM. Full article

A supercapacitor’s energy storage capability is greatly dependent on electrode materials. Layered double hydroxides (LDHs) were extensively studied as battery-type electrodes because of their 2D structure and quick intercalation/deintercalation of electrolyte ions. However, the energy storage capability for pristine LDHs is limited by their large aggregation tendency and poor electrical conductivity. Herein, a novel NiCoMn-LDH/SWCNTs (single-walled carbon nanotubes) composite electrode material, with ultrathin NiCoMn-LDH nanosheets dispersedly grown among the highly conductive networks of SWCNTs, was prepared via a facile zeolitic imidazolate framework-67 (ZIF-67)-derived in situ etching and deposition procedure. The NiCoMn-LDH/SWCNTs electrode demonstrates a specific capacitance as large as 1704.3 F g⁻¹ at 1 A g⁻¹, which is ascribed to its exposure of more active sites than NiCoMn-LDH. Moreover, the assembled NiCoMn-LDH/SWCNTs//BGA (boron-doped graphene aerogel) hybrid supercapacitor exhibits a superior capacitance of 167.9 F g⁻¹ at 1.0 A g⁻¹, an excellent energy density of 45.7 Wh kg⁻¹ with a power density of 700 W kg⁻¹, and an outstanding cyclic stability with 82.3% incipient capacitance maintained when subjected to 5000 charge and discharge cycles at the current density of 10 A g⁻¹, suggesting the significant potential of NiCoMn-LDH/SWCNTs as the electrode material applicable in supercapacitors. Full article

The mechanical stability of carbon aerogels, particularly their thermal insulation performance, is closely linked to their elastic modulus. This property plays a crucial role in determining the material’s overall mechanical stability. The objective of this study is to enhance the accuracy of elastic modulus predictions for carbon aerogels using a power-scaling model. By setting the prefactor of the Gibson and Ashby equation to 1.0, accurate predictions of the elastic modulus can be achieved if the correct scaling exponent is determined. Twelve sets of experimental data were used to fit the power-scaling model, revealing that the scaling exponent for the elastic modulus of carbon aerogels typically falls between 2.2 and 3.0. This range is narrower than the 2.0 to 4.0 range reported in the literature, with a median value of 2.6 providing reliable predictions. Additionally, a relationship between the solid thermal conductivity and the elastic modulus of carbon aerogels was established using a thermal conduction model. The study also examined the elastic modulus of carbon nanotube and graphene aerogels—both allotropes of carbon aerogel. By fitting experimental data into the power-scaling model, the scaling exponents for carbon nanotube aerogels and graphene aerogels were found to range from 2.7 to 3.5 and 2.7 to 3.7, respectively. Median exponent values of 3.1 and 3.2 were identified as optimal for predicting the elastic moduli of carbon nanotube and graphene aerogels. Full article

One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions. Full article

Graphene aerogels are of high interest nowadays since they have ultralow density, rich porosity, high deformability, and good adsorption. In the present work, three different morphologies of graphene aerogels with a honeycomb-like structure are considered. The strength and deformation behavior of these graphene honeycomb structures are studied by molecular dynamics simulation. The effect of structural morphology on the stability of graphene aerogel is discussed. It is shown that structural changes significantly depend on the structural morphology and the loading direction. The deformation of the re-entrant honeycomb is similar to the deformation of a conventional honeycomb due to the opening of the honeycomb cells. At the first deformation stage, no stress increase is observed due to the structural transformation. Further, stress concentration on the junctions of the honeycomb structure and over the walls occurs. The addition of carbon nanotubes and graphene flakes into the cells of graphene aerogel does not result in a strength increase. The mechanisms of weakening are analyzed in detail. The obtained results further contribute to the understanding of the microscopic deformation mechanisms of graphene aerogels and their design for various applications. Full article

Graphene aerogels (GAs) possess a remarkable capability to absorb electromagnetic waves (EMWs) due to their favorable dielectric characteristics and unique porous structure. Nevertheless, the introduction of nitrogen atoms into graphene aerogels can result in improved impedance matching. In recent years, nitrogen-doped graphene aerogels (NGAs) have emerged as promising materials, particularly when combined with magnetic metals, magnetic oxides, carbon nanotubes, and polymers, forming innovative composite systems with excellent multi-functional and broadband absorption properties. This paper provides a comprehensive summary of the synthesis methods and the EMW absorption mechanism of NGAs, along with an overview of the absorption properties of nitrogen-doped graphene-based aerogels. Furthermore, this study sheds light on the potential challenges that NGAs may encounter. By highlighting the substantial contribution of NGAs in the field of EMW absorption, this study aims to facilitate the innovative development of NGAs toward achieving broadband absorption, lightweight characteristics, and multifunctionality. Full article

Graphene oxide aerogel (GOA) has wide application prospects due to its low density and high porosity. However, the poor mechanical properties and unstable structure of GOA have limited its practical applications. In this study, polyethyleneimide (PEI) was used to graft onto the surface of GO and carbon nanotubes (CNTs) to improve compatibility with polymers. Composite GOA was prepared by adding styrene-butadiene latex (SBL) to the modified GO and CNTs. The synergistic effect of PEI and SBL, resulted in an aerogel with excellent mechanical properties, compressive resistance, and structural stability. When the ratio of SBL to GO and GO to CNTs was 2:1 and 7:3, respectively, the obtained aerogel performance was the best, and the maximum compressive stress was 784.35% higher than that of GOA. The graft of PEI on the surface of GO and CNT could improve the mechanical properties of the aerogel, with greater improvements observed with grafting onto the surface of GO. Compared with GO/CNT/SBL aerogel without PEI grafting, the maximum stress of GO/CNT–PEI/SBL aerogel increased by 5.57%, that of GO–PEI/CNT/SBL aerogel increased by 20.25%, and that of GO–PEI/CNT–PEI/SBL aerogel increased by 28.99%. This work not only provided a possibility for the practical application of aerogel, but also steered the research of GOA in a new direction. Full article

Silica aerogels are a class of materials that can be tailored in terms of their final properties and surface chemistry. They can be synthesized with specific features to be used as adsorbents, resulting in improved performance for wastewater pollutants’ removal. The purpose of this research was to investigate the effect of amino functionalization and the addition of carbon nanostructures to silica aerogels made from methyltrimethoxysilane (MTMS) on their removal capacities for various contaminants in aqueous solutions. The MTMS-based aerogels successfully removed various organic compounds and drugs, achieving adsorption capacities of 170 mg⋅g⁻¹ for toluene and 200 mg⋅g⁻¹ for xylene. For initial concentrations up to 50 mg⋅L⁻¹, removals greater than 71% were obtained for amoxicillin, and superior to 96% for naproxen. The addition of a co-precursor containing amine groups and/or carbon nanomaterials was proven to be a valuable tool in the development of new adsorbents by altering the aerogels’ properties and enhancing their adsorption capacities. Therefore, this work demonstrates the potential of these materials as an alternative to industrial sorbents due to their high and fast removal efficiency, less than 60 min for the organic compounds, towards different types of pollutants. Full article

This paper considers the synthesis of a novel nanocomposite based on reduced graphene oxide and oxidized carbon nanotubes modified with polyaniline and phenol-formaldehyde resin and developed through the carbonization of a pristine aerogel. It was tested as an efficient adsorbent to purify aquatic media from toxic Pb(II). Diagnostic assessment of the samples was carried out through X-ray diffractometry, Raman spectroscopy, thermogravimetry, scanning and transmission electron microscopy, and infrared spectroscopy. The carbonized aerogel was found to preserve the carbon framework structure. The sample porosity was estimated through nitrogen adsorption at 77 K. It was found that the carbonized aerogel predominantly represented a mesoporous material having a specific surface area of 315 m²/g. After carbonization, an increase in smaller micropores occurred. According to the electron images, the highly porous structure of the carbonized composite was preserved. The adsorption capacity of the carbonized material was studied for liquid-phase Pb(II) extraction in static mode. The experiment results showed that the maximum Pb(II) adsorption capacity of the carbonized aerogel was 185 mg/g (at pH 6.0). The results of the desorption studies showed a very low desorption rate (0.3%) at pH 6.5 and a rate of about 40% in a strongly acidic medium. Full article

Innovative dendrimer-modified graphene oxide (GO) aerogels are reported by employing generation 3.0 poly(amidoamine) (PAMAM) dendrimer and a combined synthesis approach based on the hydrothermal method and freeze-casting followed by lyophilization. The properties of modified aerogels were investigated with the dendrimer concentration and the addition of carbon nanotubes (CNTs) in varying ratios. Aerogel properties were evaluated via scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The obtained results indicated a strong correlation of the N content with the PAMAM/CNT ratio, where optimum values were revealed. The CO₂ adsorption performance on the modified aerogels increased with the concentration of the dendrimer at an appropriate PAMAM/CNT ratio, reaching the value of 2.23 mmol g⁻¹ at PAMAM/CNT ratio of 0.6/0.12 (mg mL⁻¹). The reported results confirm that CNTs could be exploited to improve the functionalization/reduction degree in PAMAM-modified GO aerogels for CO₂ capture. Full article

As technology advances toward ongoing circuit miniaturization and device size reduction followed by improved power density, heat dissipation is becoming a key challenge for electronic equipment. Heat accumulation can be prevented if the heat from electrical equipment is efficiently exported, ensuring a device’s lifespan and dependability and preventing otherwise possible mishaps or even explosions. Hence, thermal management applications, which include altering the role of aerogels from thermally insulative to thermally conductive, have recently been a hot topic for 3D-aerogel-based thermal interface materials. To completely comprehend three-dimensional (3D) networks, we categorized and comparatively analyzed aerogels based on carbon nanomaterials, namely fibers, nanotubes, graphene, and graphene oxide, which have capabilities that may be fused with boron nitride and impregnated for better thermal performance and mechanical stability by polymers, including epoxy, cellulose, and polydimethylsiloxane (PDMS). An alternative route is presented in the comparative analysis by carbonized cellulose. As a result, the development of structurally robust and stiff thermally conductive aerogels for electronic packaging has been predicted to increase polymer thermal management capabilities. The latest trends include the self-organization of an anisotropic structure on several hierarchical levels within a 3D framework. In this study, we highlight and analyze the recent advances in 3D-structured thermally conductive aerogels, their potential impact on the next generation of electronic components based on advanced nanocomposites, and their future prospects. Full article

Three-dimensional (3D) graphene oxide aerogel (GOA) is one of the best fillers for composites for microwave absorption. However, its further development has been hindered by the poor mechanical properties. Methodology to improve the mechanical properties of the aerogel remains an urgent challenge. Herein, graphene oxide/carbon nanotube/epoxy resin composite aerogel (GCEA) was successfully prepared by a facile method. The results showed that the prepared GCEA with the hierarchical and 3D cross-linked structures exhibited excellent compression performance, structural and thermal stability, high hydrophilicity, and microwave absorption. The prepared GCEA recovered from multiple large strain cycles without significant permanent deformation. The minimum reflection loss (RL) was −39.60 dB and the maximum effective absorption bandwidth (EAB) was 2.48 GHz. The development of the enhanced GO aerogels will offer a new approach to the preparation of 3D microwave-absorbing skeletal materials with good mechanical properties. Full article

Carbon material-based aerogels (CMBAs) have three-dimensional porous structure, high specific surface area, low density, high thermal stability, good electric conductivity, and abundant surface-active sites, and, therefore, have shown great application potential in energy storage, environmental remediation, electrochemical catalysis, biomedicine, analytical science, electronic devices, and others. In this work, we present recent progress on the fabrication, structural design, functional tailoring, and gas adsorption applications of CMBAs, which are prepared by precursor materials, such as polymer-derived carbon, carbon nanotubes, carbon nanofibers, graphene, graphene-like carbides, fullerenes, and carbon dots. To achieve this aim, first we introduce the fabrication methods of various aerogels, and, then, discuss the strategies for regulating the structures of CMBAs by adjusting the porosity and periodicity. In addition, the hybridization of CMBAs with other nanomaterials for enhanced properties and functions is demonstrated and discussed through presenting the synthesis processes of various CMBAs. After that, the adsorption performances and mechanisms of functional CMBAs towards CO₂, CO, H₂S, H₂, and organic gases are analyzed in detail. Finally, we provide our own viewpoints on the possible development directions and prospects of this promising research topic. We believe this work is valuable for readers to understand the synthesis methods and functional tailoring of CMBAs, and, meanwhile, to promote the applications of CMBAs in environmental analysis and safety monitoring of harmful gases. Full article