Search Results (88)

Glucose (Glu) detection, as a fundamental analytical technique, has applications in medical diagnostics, clinical testing, bioanalysis and environmental monitoring. In this work, a solid-phase electrochemiluminescence (ECL) enzyme sensor was developed by immobilizing the ECL emitter in a stable manner within bipolar silica nanochannel array film (bp-SNA), enabling sensitive glucose detection. The sensor was constructed using an electrochemical-assisted self-assembly (EASA) method with various siloxane precursors to quickly modify the surface of indium tin oxide (ITO) electrodes with a bilayer SNA of different charge properties. The inner layer, including negatively charged SNA (n-SNA), attracted the positively charged ECL emitter tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) via electrostatic interaction, while the outer layer, including positively charged SNA (p-SNA), repelled it, forming a barrier that efficiently concentrated the Ru(bpy)₃²⁺ emitter in a stable manner. After modifying the amine groups on the p-SNA surface with aldehyde groups, glucose oxidase (GOx) was covalently immobilized, forming the enzyme electrode. In the presence of glucose, GOx catalyzed the conversion of glucose to hydrogen peroxide (H₂O₂), which acted as a quencher for the Ru(bpy)₃²⁺/triethanolamine (TPA) system, reducing the ECL signal and enabling quantitative glucose analysis. The sensor exhibited a wide linear range from 10 μM to 7.0 mM and a limit of detection (LOD) of 1 μM (S/N = 3). Glucose detection in fetal bovine serum was realized. By replacing the enzyme type on the electrode surface, this sensing strategy holds the potential to provide a universal platform for the detection of different metabolites. Full article

Surgical resection is the primary treatment for melanoma; however, preventing tumor recurrence after resection remains a significant clinical challenge. To address this, we developed a multifunctional nanocomposite hydrogel (H-CPG) composed of glucose oxidase (GOx)-coated CuS@PDA@GOx (CPG) nanoparticles, aminated hyaluronic acid (HA-ADH), and oxidized rhizomatous polysaccharides (OBSP), which are interconnected through hydrogen bonds and dynamic Schiff base linkages. In the acidic tumor micro-environment, the hydrogel releases GOx, catalyzing the production of hydrogen peroxide (H₂O₂), which enhances chemokinetic activity through a Cu²⁺-mediated Fenton-like reaction. This process generates hydroxyl radicals that intensify oxidative stress and promote macrophage polarization from the M2 to M1 phenotype. This polarization triggers the release of pro-inflammatory cytokines, thereby inhibiting tumor recurrence. Additionally, the hydrogel induces photothermal effects that help eradicate residual bacteria at the wound site. Overall, the H-CPG hydrogel offers a dual mechanism to prevent melanoma recurrence and reduce resistance to monotherapy, presenting a promising strategy for postoperative tumor management. Full article

Thiosemicarbazones (TSCs) with their modular character (thiosemicarbazides + carbonyl compound) allow broad variation of up to four substituents on the main R¹R²C=N(1)–NH–C(S)–N(4)R³R⁴ core and are thus interesting tools for the formation of conjugates or the functionalization of nanoparticles (NPs). In this work, di-2-pyridyl ketone was introduced for the coordination of metals and 9-anthraldehyde for luminescence as R¹ and R² to TSCs. R³ and R⁴ substituents were varied for the formation of conjugates. Amino acids were introduced at the N4 position to produce [R¹R²TSC–spacer–amino acid] conjugates. Further, functions such as phosphonic acid (R–P(O)(OH)₂), D-glucose, o-hydroquinone, OH, and thiol (SH) were introduced at the N4 position producing [R¹R²TSC–spacer–anchor group] conjugates for direct NP anchoring. Phenyl, cyclohexyl, benzyl, ethyl and methyl were used as spacer units. Both phenyl phosphonic acid TSC derivatives were bound on TiO₂ NPs as a first example of direct NP anchoring. [R¹R²TSC–spacer–end group] conjugates including OH, S–Bn (Bn = benzyl), NH–Boc (Boc = tert-butyloxycarbonyl), COOtBu, C≡CH, or N₃ end groups were synthesized for potential covalent binding to functional molecules or functionalized NPs through amide, ester, or triazole functions. The synthesis of the thiosemicarbazides H₂NNH–C(S)–NR₃R₄ starting from amines, including amino acids, SCCl₂ or CS₂, and hydrazine and their condensation with dipyridyl ketone and anthraldehyde led to 34 new TSC derivatives. They were synthesized in up to six steps with overall yields ranging from 10 to 85% and were characterized by a combination of nuclear magnetic resonance spectroscopy and mass spectrometry. UV-vis absorption and photoluminescence spectroscopy allowed us to easily trace the dipyridyl imine and anthracene chromophores. Full article

The development of conducting polymer incorporated with carbon materials-based electrochemical biosensors has been intensively studied due to their excellent electrical, optical, thermal, physical and chemical properties. In this work, a label-free electrochemical dopamine (DA) biosensor based on polyaniline (PANI) and its aminated derivative, i.e., poly(3-aminobenzylamine) (PABA), composited with functionalized multi-walled carbon nanotubes (f-CNTs), was developed to utilize a conducting polymer as a transducing material. The electrospun nanofibers of the composites were fabricated on the surface of fluorine-doped tin oxide (FTO)-coated glass substrate under the optimized condition. The PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers were characterized by attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which confirmed the existence of f-CNTs in the composites. The electroactivity of the electrospun nanofibers was investigated in phosphate buffer saline solution using cyclic voltammetry (CV) before being employed for label-free electrochemical detection of DA using differential pulse voltammetry (DPV). The sensing performances including sensitivity, selectivity, stability, repeatability and reproducibility of the fabricated electrospun nanofiber films were also electrochemically evaluated. The electrochemical DA biosensor based on PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers exhibited a sensitivity of 6.88 µA·cm⁻²·µM⁻¹ and 7.27 µA·cm⁻²·µM⁻¹ in the linear range of 50–500 nM (R² = 0.98) with a limit of detection (LOD) of 0.0974 µM and 0.1554 µM, respectively. The obtained DA biosensor showed great stability, repeatability and reproducibility with precious selectivity under the common interferences, i.e., glucose, ascorbic acid and uric acid. Moreover, the developed electrochemical DA biosensor also showed the good reliability under detection of DA in artificial urine. Full article

Previous studies have suggested a potential role of bone morphogenetic protein 6 (BMP6) in glucose metabolism, which also seems to be regulated by serotonin (5-hydroxytryptamine, 5HT), a biogenic amine with multiple roles in the organism. In this study, we explored possible interactions between BMP6, serotonin, and glucose metabolism regulation. The effect of BMP6 or 5HT on pancreatic β-cells has been studied in vitro using the INS-1 832/13 rat insulinoma cell line. Studies in vivo have been performed on mice with the global deletion of the Bmp6 gene (BMP6−/−) and included glucose and insulin tolerance tests, gene expression studies using RT-PCR, immunohistochemistry, and ELISA analyses. We have shown that BMP6 and 5HT treatments have the opposite effect on insulin secretion from INS-1 cells. The effect of BMP6 on the 5HT system in vivo depends on the tissue studied, with no observable systemic effect on peripheral 5HT metabolism. BMP6 deficiency does not cause diabetic changes, although a mild difference in insulin tolerance test between BMP6−/− and WT mice was observed. In conclusion, BMP6 does not directly influence glucose metabolism, but there is a possibility that its deletion causes slowly developing changes in glucose and serotonin metabolism, which would become more expressed with ageing. Full article

Novel platinum(II) complexes of 4′-substituted terpyridine ligands were synthesized and characterized. Each complex had a different biomolecule (amine, glucose, biotin and hyaluronic acid) as a targeting motif, potentially improving therapeutic outcomes. We demonstrated that complexes can self-assemble in water into about 150 nm nanoparticles. Moreover, the complexes were assayed in vitro toward a panel of human cancer cell lines (ovarian adenocarcinoma A2780, lung cancer A549, breast adenocarcinoma MDA-MB-231, neuroblastoma SHSY5Y) to explore the impact of the pendant moiety on the terpyridine toxicity. The platinum complex of terpyridine amine derivative, [Pt(TpyNH₂)Cl]Cl, showed the best antiproliferative effect, which was higher than cisplatin and [Pt(Tpy)Cl]Cl. Selective in vitro antiproliferative activity was achieved in A549 cancer cells with the Pt–HAtpy complex. These findings underline the potential of these novel platinum(II) complexes in cancer therapy and highlight the importance of tailored molecular design for achieving enhanced therapeutic effects. Full article

Two series of sugar esters with alkyl chain lengths varying from 5 to 12 carbon atoms, and with a head group consisting of glucose or galactose moieties, were synthesized. Equilibrium surface tension isotherms were measured, yielding critical micellar concentration (CMC) surface tensions at CMC (γcmc) and minimum areas at the air–water interface (Amin). In addition, Krafft temperatures (Tks) were measured to characterize the ability of molecules to dissolve in water, which is essential in numerous applications. As a comparison to widely used commercial sugar-based surfactants, those measurements were also carried out for four octyl d-glycosides. Impacts of the linkages between polar and lipophilic moieties, alkyl chain lengths, and the nature of the sugar head group on the measured properties were highlighted. Higher Tk and, thus, lower dissolution ability, were found for methyl 6-O-acyl-d-glucopyranosides. CMC and γcmc decreased with the alkyl chain lengths in both cases, but Amin did not appear to be influenced. Both γcmc and Amin appeared independent of the ester group orientation. Notably, alkyl (methyl α-d-glucopyranosid)uronates were found to result in noticeably lower CMC, possibly due to a closer distance between the carbonyl function and the head group. Full article

We prepared network polysaccharide nanoscopic hydrogels by crosslinking water-soluble chitosan (WSCS) with a carboxylate-terminated maltooligosaccharide crosslinker via condensation. In this study, the enzymatic elongation of amylose chains on chitosan-based network polysaccharides by glucan phosphorylase (GP) catalysis was performed to obtain assembly materials. Maltoheptaose (Glc₇) primers for GP-catalyzed enzymatic polymerization were first introduced into WSCS by reductive amination. Crosslinking of the product with the above-mentioned crosslinker by condensation was then performed to produce Glc₇-modified network polysaccharides. The GP-catalyzed enzymatic polymerization of the α-d-glucose 1-phosphate monomer from the Glc₇ primers on the network polysaccharides was conducted, where the elongated amylose chains formed double helices. Enzymatic disintegration of the resulting network polysaccharide assembly successfully occurred by α-amylase-catalyzed hydrolysis of the double helical amyloses. The encapsulation and release of a fluorescent dye, Rhodamine B, using the CS-based network polysaccharides were also achieved by means of the above two enzymatic approaches. Full article

The influence of different levels of sodium chloride, sodium nitrite, and glucose on the quality characteristics of spontaneously fermented goat meat sausage was investigated. The amounts of total biogenic amines in all the sausages ranged from 324.70 to 388.77 mg/kg; among them, spermine was the most abundant, with amounts ranging from 230.96 to 275.78 mg/kg. Increasing sodium chloride from 15 to 35 g/kg, the content of cadaverine, putrescine, tyramine, phenylethylamine, tryptamine, and total amines decreased, and Enterobacteriaceae counts decreased at the same time. Increasing sodium nitrite from 150 to 250 mg/kg, the content of cadaverine, histamine, and total amines decreased, while Enterobacteriaceae counts decreased simultaneously. Increasing glucose from 10 to 40 g/kg, the content of cadaverine, spermidine, and total amines decreased. Enterococcus was the most abundant genus across all the samples, and the relative abundance of Enterococcus was reduced obviously by increasing sodium nitrite and glucose levels. The top 10 differential bacterial taxa for each additive group were respectively obtained, and microbial biomarkers for each level of additive within its group were acquired, respectively. Through Pearson correlation, Lactobacillus was positively correlated with phenylethylamine, tryptamine, tyramine, and cadaverine, Bacteroides and Sediminibacterium were positively correlated with phenylethylamine and putrescine, respectively, suggesting they have the potential to produce biogenic amines. The results provided references for controlling the accumulation of biogenic amines in fermented goat meat sausage via the addition of auxiliary additives during the processing. Full article

The effective synthesis of N-benzyl cyclo-tertiary amines using imine reductase, key components in natural products and pharmaceutical synthesis, is a green approach. Traditional methods faced challenges with enzyme activity and selectivity. This study focused on enhancing Mesorhizobium imine reductase (MesIRED) for better N-benzyl cyclo-tertiary amine production. Through alanine scanning and consensus mutation, 12 single-site MesIRED mutants were identified from 23 candidates, showing improved conversion of N-benzylpyrrolidine and N-benzylpiperidine. Notably, mutants from I177, V212, I213, and A241 significantly boosted conversions. The best-performing mutant for N-benzylpyrrolidine, MesIRED^V212A/I213V (M1), increased conversion from 23.7% to 74.3%. For N-benzylpiperidine, MesIRED^{V212A/I177A/A241I} (M2) enhanced conversion from 22.8% to 66.8%. Tunnel analysis revealed M1 and M2 have more efficient tunnels for larger product movement compared to wild-type MesIRED. Using recombinant E. coli coexpressing MesIRED and glucose dehydrogenase (GDH), high conversions were achieved: 75.1% for N-benzylpyrrolidine (M1) and 88.8% for N-benzylpiperidine (M2). A preparative experiment resulted in 86.2% conversion and 60.2% yield for N-benzylpiperidine. This research offers an efficient method for engineering IRED, significantly improving conversion and selectivity for N-benzyl cyclo-tertiary amines, aiding drug synthesis and providing insights into rational design of other enzymes. Full article

A Chitosan is a copolymer of N-acetyl-D-glucose amine and D-glucose amine that can be easily produced. It is a polymer that is widely utilized to create nanoparticles (NPs) with specific properties for applications in a wide range of human activities. Chitosan is a substance with excellent prospects due to its antibacterial, anti-inflammatory, antifungal, haemostatic, analgesic, mucoadhesive, and osseointegrative qualities, as well as its superior film-forming capacity. Chitosan nanoparticles (NPs) serve a variety of functions in the pharmaceutical and medical fields, including dentistry. According to recent research, chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antibacterial agents to improve the management of oral diseases. This narrative review aims to discuss the development of chitosan-containing materials for dental and implant engineering applications, as well as the challenges and future potential. For this purpose, the PubMed database (Medline) was utilised to search for publications published less than 10 years ago. The keywords used were “chitosan coating” and “dentistry”. After carefully selecting according to these keywords, 23 articles were studied. The review concluded that chitosan is a biocompatible and bioactive material with many benefits in surgery, restorative dentistry, endodontics, prosthetics, orthodontics, and disinfection. Furthermore, despite the fact that it is a highly significant and promising coating, there is still a demand for various types of coatings. Chitosan is a semi-synthetic polysaccharide that has many medical applications because of its antimicrobial properties. This article aims to review the role of chitosan in dental implantology. Full article

Using oleanolic acid as a starting compound, a series of new oleanane-type triterpenic derivatives were synthesized via O-acylation (with nicotinic, isonicotinic, and methoxycinnamic acid acyl chlorides), N-amidation (with cyclic- or polyamines), the Mannich reaction (with secondary cyclic amines), and Claisen–Schmidt condensation (with aromatic aldehydes), and their potencies as treatments for immunometabolic disorders were investigated. The compounds were evaluated against α-glucosidase and PTP1B enzymes and LPS-stimulated murine macrophages. It was found that the target compounds are highly effective α-glucosidase inhibitors but lack activity against PTP1B. A leading compound, N-methylpiperazine methylated 2,3-indolo-oleanolic propargyl amide 15, is also a micromolar inhibitor of NO synthesis in LPS-stimulated macrophages and suppresses oxidative bursts in neutrophils with similar efficiency. These results, in addition to its ability to stimulate glucose uptake in rat fibroblasts and improve maltose tolerance in rats, allow us to consider compound 15 a promising prototype drug for the treatment of immunometabolic defects in type 2 diabetes. Full article

We investigated the effects of different types of long-term fermented soybeans (traditionally made doenjang; TMD) on glucose and bone metabolism and memory function in ovariectomized (OVX) rats. The rats were categorized into six groups: Control, cooked unfermented soybeans (CSB), and four TMDs based on Bacillus subtilis (B. subtilis) and biogenic amine contents analyzed previously: high B. subtilis (HS) and high biogenic amines (HA; HSHA), low B. subtilis (LS) and HA (LSHA), HS and low biogenic amines (LA; HSLA), and LS and LA (LSLA). The rats in the CSB and TMD groups fed orally had a 4% high-fat diet for 12 weeks. Rats in the Control (OVX rats) and Normal-control (Sham-operated rats) groups did not consume CSB or TMD, although macronutrient contents were the same in all groups. Uterine weight and serum 17β-estradiol concentrations were much lower in the Control than the Normal-control group, but CSB and TMD intake did not alter them regardless of B. subtilis and biogenic amine contents. HOMA-IR, a measure of insulin resistance, decreased with TMD with high B. subtilis (HSLA and HSHA) compared to the Control group. In OGTT and IPGTT, serum glucose concentrations at each time point were higher in the Control than in the Normal-control, and HSLA and HSHA lowered them. Memory function was preserved with HSHA and HSLA administration. Bone mineral density decline measured by DEXA analysis was prevented in the HSHA and HSLA groups. Bone metabolism changes were associated with decreased osteoclastic activity, parathyroid hormone levels, and osteoclastic activity-related parameters. Micro-CT results demonstrated that TMD, especially HSLA and HSHA, preserved bone structure in OVX rats. TMD also modulated the fecal bacterial community, increasing Lactobacillus, Ligalactobacillus, and Bacillus. In conclusion, through gut microbiota modulation, TMD, particularly with high B. subtilis content, acts as a synbiotic to benefit glucose, bone, and memory function in OVX rats. Further research is needed to make specific recommendations for B. subtilis-rich TMD for menopausal women. Full article

In this study, the quality (sensory evaluation, microbial enumerate, color, tvb-n (total volatile basic nitrogen), tca-soluble peptide (trichloroacetic acid-soluble peptide), muscle glucose, lactate, total sugar, Bas (Biogenic amines), VOCs (volatile organic compounds) and the microbial dynamic structure in samples stored at 4 °C were evaluated, and the relationship between VOCs and the diversity structure of microorganisms was also discussed. It was determined by sensory evaluation that the shelf life of samples was around 8 days. Protein and sugar were detected in large quantities by microorganisms in the later stage. At the same time, this also caused a large amount of Bas (biogenic amines) (tyramine, cadaverine, and putrescine). According to high-throughput amplicon sequencing, the initial microbiota of samples was mainly composed of Pseudomonas, Acinetobacter, Planifilum, Vagococcus, Hafnia, Mycobacterium, Thauera, and Yersinia. Among them, Pseudomonas was the most advantageous taxon of samples at the end of the shelf life. The minor fraction of the microbial consortium consisting of Vagococcus, Acinetobacter and Myroides was detected. The substances 3-methyl-1-butanol, ethyl acetate, and acetone were the main volatile components. The glucose, lactic acid, and total sugar were negatively correlated with Yersinia, Hafnia-Obesumbacterium, Thauera, Mycobacterium, and Planifilum; the proportion of these microorganisms was relatively high in the early stage. TVB-N and TCA-soluble peptides were positively correlated with Pseudomonas, Shewanella, Brochothrix, Vagococcus, Myroides, and Acinetobacter, and these microorganisms increased greatly in the later stage. The substance 3-methyl-1-butanol was positively correlated with Pseudomonas and negatively correlated with Mycobacterium. Ethyl acetate was associated with Hafnia-Obesumbacterium, Thauera, and Yersinia. Acetone was positively correlated with Acinetobacter. Full article

Nanocomposite hydrogels offer remarkable potential for applications in bone tissue engineering. They are synthesized through the chemical or physical crosslinking of polymers and nanomaterials, allowing for the enhancement of their behaviour by modifying the properties and compositions of the nanomaterials involved. However, their mechanical properties require further enhancement to meet the demands of bone tissue engineering. Here, we present an approach to improve the mechanical properties of nanocomposite hydrogels by incorporating polymer grafted silica nanoparticles into a double network inspired hydrogel (gSNP Gels). The gSNP Gels were synthesised via a graft polymerization process using a redox initiator. gSNP Gels were formed by grafting 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as the first network gel followed by a sequential second network acrylamide (AAm) onto amine functionalized silica nanoparticles (ASNPs). We utilized glucose oxidase (GOx) to create an oxygen-free atmosphere during polymerization, resulting in higher polymer conversion compared to argon degassing. The gSNP Gels showed excellent compressive strengths of 13.9 ± 5.5 MPa, a strain of 69.6 ± 6.4%, and a water content of 63.4% ± 1.8. The synthesis technique demonstrates a promising approach to enhance the mechanical properties of hydrogels, which can have significant implications for bone tissue engineering and other soft tissue applications. Full article