Search Results (9)

Among numerous atmospheric-pressure plasma jets (APPJs), high industrial acceptability has been reached for the ones based on high-voltage, low-current, vortex-stabilized arc, typically operated with kHz DC-pulses. This review explores the interrelations between the “process” in a chemical–physical sense and “process”, or to better differentiate, “processing” in the sense of technological treatment, with respect to such APPJs. The mutual dependence of the processing requirements (e.g., high processing speed, compatibility with robotic processing, low total cost of ownership, reliability, and long service intervals) and the physical and chemical processes in the plasma jet are analyzed. The focus is on the hybrid character of the produced plasma, comprising a non-equilibrium arc and a diffuse plasma. Different operation modes of the gliding arc discharge (GAD) are discussed. The reviewed chemical processes are the generation of reactive oxygen–nitrogen species (RONS), oxidation and reduction reactions, and interactions with vapors, solids, and liquids. The considered processing examples are established applications, such as surface activation, cleaning, oxide reduction, film removal, and coating, as well as emerging applications for sterilization and plasma-activated water (PAW) production. Full article

This study evaluates the effects of gliding arc discharge low-temperature plasma (GAD-LTP) pretreatment on the drying performance and quality attributes of blueberries. Fresh blueberries were pretreated under varying conditions—treatment durations of 6 s, 12 s, and 18 s and power levels of 300 W, 600 W, and 900 W—prior to convective hot air drying at 65 °C. Results demonstrate that plasma pretreatment significantly reduced drying time, with an 18 s treatment at 900 W reducing drying time by 31.25%. Moisture diffusion coefficients increased with both treatment duration and power. Under optimal conditions, total phenolic content improved by up to 33.47%, while anthocyanin retention initially declined then recovered, reaching a 7.9% increase over the control. However, plasma-treated samples exhibited darker color due to surface etching and oxidation. Rehydration capacity improved, with a maximum enhancement of 27.94%. Texture analysis indicated increased hardness and decreased adhesiveness and chewiness in treated samples. Overall, GAD-LTP pretreatment enhances drying efficiency and preserves bioactive compounds in dried blueberries, offering a scalable approach for industrial application. Full article

In this work, gliding arc discharge (GAD) was used to produce air plasma and investigate the influence of the discharge parameters on the composition of the air plasma, vibrational temperatures, and the production of NO_x. It was demonstrated that the main particles obtained in the GAD air plasma were N₂*, N₂⁺, N⁺, NO_γ, and O. It was observed that the reduction in the discharge frequency increased the intensity of the excited nitrogen molecules lines and reduced the nitric oxide (NO) and nitrogen dioxide (NO₂) gas concentrations. The increase in the output voltage prolonged the duration of arc discharge and enhanced the intensities of the emission lines of the N₂⁺, O, and NO_γ species and the concentrations of NO and NO₂ gasses. It was shown that the increase in the air flow rate from 6.7 L/min to 15.6 L/min decreased the concentration of the produced NO gas by 24%. Additionally, the line intensities of all main species in air plasma were enhanced. Studies have shown that the NO and NO₂ gas concentrations (selectivity of NO and NO₂) can be controlled by varying the air flow, output voltage, and discharge frequency. The highest NO_x concentration of 2380 ppm was produced at 250 V, when the direct air flow was 11.2 L/min. Full article

Plasma treatment of wood surfaces has shown significant effects, but different excitation methods used for different species of wood generally result in varied characteristics of wood surfaces. Secondly, plasma modification greatly enhances the absorption of liquids by wood, but the relationship between liquid absorption and surface wettability is rarely studied. Limited detailed investigation of the modification effects and mechanisms has hindered the large-scale applications of plasma treatment in the wood industry. In this study, two typical plasmas, radio frequency (RF) plasma and gliding arc discharge (GAD) plasma, were employed to treat three species of wood: poplar, black walnut, and sapele. By focusing on changes in the contact angle of the wood surface, an exponential equation fitting method is used to determine the measurement time for contact angles. The research identified that factors contributing to the decrease in contact angle after plasma modification include not only the increase in surface energy but also liquid absorption. SEM and XPS analyses demonstrate that plasma etching accelerated liquid absorption by modifying the surface topography, while the increase in surface energy was due to the addition of oxygen-containing groups. High-valence C=O and O-C=O groups serve as indicators of plasma-induced surface chemical reactions. RF modification primarily features surface etching, whereas GAD significantly increases the active surface groups. Thus, different plasmas, due to their distinct excitation modes, produce diverse modification effects on wood. Considering the various physical and chemical properties of plasma-modified wood surfaces, recommendations for adhesive use on plasma-modified wood are provided. Full article

A gliding arc discharge (GAD) plasma device has been developed and tested. Possible applications areas for GAD plasma could be microalgae suspension treatments and the creation of plasma-activated water. To understand its behavior, the influence of the input power on the electrical characteristics of the generated GAD plasma was investigated using an oscilloscope. The waveforms of the voltage and current of GAD plasma are presented. The duration of the discharge time and the evolution of the arc during discharge were determined and investigated. It was revealed that the increase in the output voltage prolonged the duration of the arc discharge. The composition of the air plasma was investigated using a flame-emission spectrometer and acousto-optic emission spectrometer. It was revealed that the main species in the emission spectra of the GAD air plasma were N₂, N₂⁺, N⁺, NO, and O species. Furthermore, the increase in the input power enhanced the ionization degree of the air plasma and increased the intensities of the emission lines associated with N₂⁺, NO, and O species. An increase in the conductivity of the BG-11 medium was observed. Physicochemical analyses of the plasma-activated BG-11 medium indicated an increase in the concentration of nitrite and nitrate ions and hydrogen peroxide with an enhancement of the voltage. Full article

The extensive use of chemical fertilizers to increase crop yields in agricultural fields has had a negative impact on the environment. To produce more food on less land and fulfill the growing global demand for food, farmers will need innovative and environmentally friendly technology. Several studies have cited the positive effects of plasma-activated water (PAW) on seeds in their research findings. This study investigates the effects of PAW on four distinct seed species: phapar (Fagopyrum esculentum), barley (Hordeum vulgare), mustard (Brassica nigra), and rayo (Brassica juncea). Deionized (DI) water was treated for 5 or 10 min using the gliding arc discharge (GAD) system, which was operated by line frequency in the air. Water analysis indicates that the physiochemical parameters (electrical conductivity, pH, nitrate, nitrite, and ammonia concentration) of PAW were significantly different from DI water. Despite exposure to GAD for a certain period of time, the temperature of DI water did not alter significantly. All calculated germination parameters were significantly enhanced for seeds treated with PAW compared to the control. In addition, they displayed a significant increase in total seedling length and exhibited greater vigor. Seeds immersed in PAW absorbed significantly more water than seeds soaked in DI water, enabling rapid water penetration into the seed and early seedling emergence. This puts plasma agriculture ahead of conventional farming methods. Full article

The use of thermal and non-thermal atmospheric pressure plasma to solve problems related to agriculture and biomedicine is the focus of this paper. Plasma in thermal equilibrium is used where heat is required. In agriculture, it is used to treat soil and land contaminated by the products of biomass, plastics, post-hospital and pharmaceutical waste combustion, and also by ecological phenomena that have recently been observed, such as droughts, floods and storms, leading to environmental pollution. In biomedical applications, thermal plasma is used in so-called indirect living tissue treatment. The sources of thermal plasma are arcs, plasma torches and microwave plasma reactors. In turn, atmospheric pressure cold (non-thermal) plasma is applied in agriculture and biomedicine where heat adversely affects technological processes. The thermodynamic imbalance of cold plasma makes it suitable for organic syntheses due its low power requirements and the possibility of conducting chemical reactions in gas at relatively low and close to ambient temperatures. It is also suitable in the treatment of living tissues and sterilisation of medical instruments made of materials that are non-resistant to high temperatures. Non-thermal and non-equilibrium discharges at atmospheric pressure that include dielectric barrier discharges (DBDs) and atmospheric pressure plasma jets (APPJs), as well as gliding arc (GAD), can be the source of cold plasma. This paper presents an overview of agriculture and soil protection problems and biomedical and health protection problems that can be solved with the aid of plasma produced with electrical discharges. In particular, agricultural processes related to water, sewage purification with ozone and with advanced oxidation processes, as well as those related to contaminated soil treatment and pest control, are presented. Among the biomedical applications of cold plasma, its antibacterial activity, wound healing, cancer treatment and dental problems are briefly discussed. Full article

One of the new methods of protecting and supporting plant growth is the use of low-temperature plasma. The aim of this study is to evaluate the feasibility of using plasma activated water produced in an atmospheric pressure gliding arc reactor for germination of beetroot (Beta vulgaris) and carrot (Daucus carota) seeds. The study was carried out for different plasma treatment times of water (5, 10 and 20 min) and with fixed geometry and power of the discharge system, using air as the working gas. The effect on germination was evaluated based on the fraction of germinated seeds and their length at 7 and 14 days after treatment. Analysis of fungi present on the seed surface and imaging of the seed surface using scanning electron microscopy (SEM) were auxiliary methods to evaluate the type of treatment effect. In the case of beetroot, a positive effect on the number and length of germinated seeds was observed, which increased with increasing treatment time. This effect can be attributed, among other things, to the surface changes observed on microscopic photographs. In the case of carrot seeds, a more significant positive effect on germination was observed. Fungal decontamination effect was relatively weaker than with the use of the chemical method with sodium hypochlorite. Full article

A review of the supply systems of non-thermal plasma reactors (NTPR) with dielectric barrier discharge (DBD), atmospheric pressure plasma jets (APPJ) and gliding arc discharge (GAD) was performed. This choice is due to the following reasons: these types of electrical discharges produce non-thermal plasma at atmospheric pressure, the reactor design is well developed and relatively simple, the potential area of application is large, especially in environmental protection processes and biotechnologies currently under development, theses reactors can be powered from similar sources using non-linear transformer magnetic circuits and power electronics systems, and finally, these plasma reactors and their power supply systems, as well as their applications are the subject of research conducted by the author of the review and her team from the Department of Electrical Engineering and Electrotechnology of the Lublin University of Technology, Poland. Full article