Search Results (68)

The recycling of by-products from fish processing procedures has recently been attracting increased attention. In this study, three types of gelatin were isolated from grass carp skin, bone, and scales, named SKG, BG, and SCG, respectively, and their structural and functional characteristics were investigated. Compared with BG and SCG, SKG exhibited the highest extraction yield (18.30 ± 0.24%) and protein content (90.12 ± 0.21%) and the lowest ash content (1.50 ± 0.08%). Electrophoresis analysis revealed that SKG contained more α chains than BG and SCG. Fourier transform infrared spectra showed that the absorption peaks of gelatin were mainly positioned in amide band regions, whereas some of the triple helix structure was lost. More than 85% solubility was observed in all gelatin types with pH 3–10. Meanwhile, there was a higher gel strength in SKG (288.2 g) than in BG (270.2 g) and SCG (245.1 g). Furthermore, the water or oil absorption and emulsifying characteristics of SKG were also better than those of BG and SCG. The differences in functional properties between gelatin types appear to be related to protein distribution and composition. All the results indicate that grass carp skin is a material with the potential to extract gelatin with a higher yield and gel strength and better functional characteristics compared with bone and scales. Full article

Tambatinga (Colossoma macropomum × Piaractus brachypomus), a hybrid Amazonian fish recognized for its superior growth performance, represents a valuable and sustainable source of collagen-rich raw material. Due to its tropical origin, the species’ skin may contain higher levels of amino acids, which can enhance the functional and structural properties of gelatin derived from it. The valorization of fish processing residues for biopolymer production not only mitigates environmental impacts but also reinforces the principles of the circular economy within aquaculture systems. This study explores the development of biopolymer films from Tambatinga skin, an abundant by-product of Brazilian aquaculture. The skins were cleaned and subjected to a hot water–acid extraction process to obtain gelatin. The extracted gelatin exhibited high proline and hydroxyproline contents (12.47 and 9.84 g/100 g of amino acids, respectively) and a Bloom strength of 263.9 g, confirming its suitability for film formation. Films were prepared using 2 g of gelatin per 100 g of film-forming solution, with glycerol added at 10 and 20 g/100 g of gelatin. The resulting films were transparent, flexible, and showed uniform surfaces. Increasing the glycerol concentration reduced tensile strength (from 59.4 to 37.9 MPa) but improved elongation at break (from 116% to 159.1%) and modified the films’ thermal behavior. Moreover, Tambatinga gelatin films demonstrated excellent UV-blocking performance (below 300 nm) and lower water vapor permeability compared to other gelatin-based films reported in the literature. These findings highlight the potential of fish skin—typically regarded as industrial waste—as a renewable and high-value raw material for the production of sustainable biopolymers. This approach supports resource efficiency, waste reduction, and the broader goals of sustainable development and circular bioeconomy. Full article

This study investigated the combined effects of linoleic acid (LA) incorporation and UV irradiation in the presence and absence of ferrous chloride (FeCl₂) on the properties and characteristics of fish skin gelatin films. UV irradiation was implemented at different intensities (10,000–40,000 lux) and with different exposure times (1 and 5 min) by two different methods: irradiating the film-forming solution before casting (S-UV) versus irradiating the pre-cast film (F-UV). The UV treatment significantly increased the elastic modulus (EM) while decreasing the tensile strength (TS), elongation at break (EAB), and water-vapor permeability (WVP) of the films (p < 0.05), irrespective of the irradiation method used. This effect became more pronounced with higher UV intensity and longer exposure times. When both LA and FeCl₂ were present, UV irradiation promoted the formation of non-disulfide covalent bonds, leading to increased cross-linking. This cross-linking improved the film’s strength and decreased its WVP, although it did cause the films to become yellowish. Fourier-transform infrared spectroscopy (FTIR) confirmed interactions between the gelatin and LA, indicated by a decrease in the intensity of Amide-A, Amide-I, and Amide-II bands. A key finding suggested that UV irradiation, combined with LA/FeCl₂ incorporation, could significantly enhance the properties of fish skin gelatin films, especially their water-vapor barrier. The study’s novelty lies in demonstrating that applying the UV treatment to either the film solution or the final film yields similar results, providing flexibility in the manufacturing process. Full article

Fish skin gelatin (FG) has garnered considerable attention as a potential substitute for mammalian gelatin. In this study, Takifugu rubripes skin gelatin was chemically modified using transglutaminase (TG) and epigallocatechin gallate (EGCG). Subsequently, the rheological, structural, and physicochemical properties of FG modified with varying concentrations of TG and EGCG were systematically examined and compared. As the concentrations of TG and EGCG increased, more extensive interactions occurred in FG, leading to a significant enhancement of gelatin properties. Following modification, the molecular weight of FG proteins increased, and this was accompanied by enhanced surface hydrophobicity and gel strength. Rheological analysis further demonstrated that the viscosity of FG modified with TG and EGCG was higher than that of unmodified FG and was positively correlated with the treatment concentrations of TG and EGCG. Additionally, the results indicated that the effect of TG modification was more pronounced than that of EGCG modification. Overall, this study demonstrates that both TG and EGCG modifications can effectively overcome the inherent limitations of fish skin gelatin, with TG showing superior efficiency as a cross-linking agent. The enhanced thermal stability, gel strength, and rheological properties achieved through these interactions significantly expand the potential applications of fish gelatin in the food industry, making it a more viable alternative to mammalian gelatin. Full article

The increasing global interest in fish consumption leads to a greater generation of fish waste. Fish waste, rich in nutrients such as protein, bioactive compounds, and vitamins, is attracting growing attention for its potential applications in food. In this study, gelatin hydrolysate obtained from fish skin waste was utilized as a stabilizer and/or emulsifier in ice cream production. It was found that gelatin hydrolysate significantly increased the protein content of the ice cream samples. The K and n values in different ice cream compositions varied between 0.009 and 1.012 Pa.sⁿ and 0.356 and 0.863, respectively. The consistency coefficients of samples D1 (sahlep and mono-diglyceride) and D3 (sahlep and gelatin hydrolysate) were almost the same, indicating that the mono-diglyceride was replaced by an equivalent amount of gelatin hydrolysate. All the ice cream mixtures tested showed non-Newtonian, pseudoplastic flow, as indicated by their n values being less than 1. All mixtures demonstrated greater elasticity than viscosity, as their storage modulus (G′) was higher than their loss modulus (G″). In the third interval of 3-ITT, all ice cream mixtures displayed thixotropic behavior, indicating that their viscoelastic properties could be restored after a sudden deformation. The overrun levels of the samples ranged from 9.55% to 21.74%; the use of gelatin hydrolysate resulted in a statistically significant increase (p < 0.05). The highest hardness and stickiness values in the samples were determined in the specific sample containing equal amounts of emulsifier, stabilizer, and gelatin hydrolysate. Furthermore, gelatin hydrolysate prolonged the first dripping time and melting rate of the samples. Full article

Gelatin, a water-soluble protein, shows unique gellification properties, which determine the active commercial availability of gelatin hydrogels in modern alimentary, cosmetic, and pharmaceutical applications. The traditional sources of gelatin for industrial technologies are pork and bovine skin and bones, which sometimes produce religious and some other restrictions. In recent years, there has been a significant increase in the production of gelatin from alternative sources, such as raw fish materials. Unfortunately, fish gelatin is characterized by weak gelling ability and a decrease in gelation and melting temperature, which are a consequence of the amino acid composition and structural features of fish gelatin. One of the ways to strengthen the natural gelling properties of fish gelatin is the structural modification of gelatin hydrogels by the introduction of polysaccharides of various natural origins. We have studied the association of our laboratory-made fish gelatin with three polysaccharides, namely, κ-carrageenan, alginate, and chitosan, which have distinct chemical structures and gelling capabilities. Structural features of the studied systems were analyzed by small-angle X-ray scattering (SAXS), powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM). We applied computer modeling of molecular interactions between fish gelatin and polysaccharides by means of molecular docking and molecular dynamics approaches. The existence of a correlation between the structure of gelatin-polysaccharide systems and their physicochemical properties was demonstrated by wetting angles (flow angles) and dynamic light scattering (DLS) studies of hydrodynamic sizes and surface ζ-potential. Full article

The properties of biopolymer films prepared using Southern meagre fish (Argyrosomus hololepidotus) skin gelatin blends, both with and without clove bud extract (CE) at concentrations of 0.3% and 0.7%, were investigated. The addition of CE enhanced the light barrier properties and decreased water vapor permeability from 1.68 to 0.85 (×10⁻¹³ g s⁻¹m⁻¹Pa⁻¹) (p < 0.05) in the films that contained CE. Additionally, the films’ water solubility diminished as the concentration of CE increased (89.20 to 69.04%) (p < 0.05). SEM images revealed a smooth, uniform surface without cracks in the samples both with and without CE, whereas the films that included CE displayed a rougher and denser cross-section. FTIR spectra revealed variations in peaks between the films containing CE and those without it. The incorporation of CE raised the glass transition temperature (51.04 to 58.80 °C) and the melting temperature (124.65 to 141.92 °C) of the films. Additionally, the antioxidant activities, assessed through DPPH free radical scavenging activity (86.97%) and reduction power (λ of 0.85), along with moderate antibacterial activities against four distinct foodborne pathogens, improved with increased concentrations of CE. It can be concluded that phenolic compounds, such as eugenol in the clove extract, facilitated the formation of additional bonds between the peptide helixes of the gelatin, thereby enhancing the properties of the CE-incorporated films. Thus, Southern meagre fish gelatin film containing CE is an effective active packaging biomaterial for seafood products, exhibiting satisfactory properties. Full article

Gelatin coatings have been shown to successfully slow the oxidation of fresh foods. Furthermore, organic acids have proven effective in the inhibition of bacteria and the extension of product shelf life. The purpose of this study was to observe the effects of gelatin and lactic acid treatment combinations on fresh and previously frozen (thawed) wild-caught shrimp. The samples were separated into four treatment groups: control (C), gelatin coating (G), lactic acid followed by gelatin coating (L), and gelatin infused with lactic acid coating (LG). Half of each group was stored at refrigeration temperature (≤4 °C), while the other half was frozen (≤−18 °C) and thawed for the thawed study. Physical, chemical, and microbiological changes were observed in refrigeration storage for 8 days. Results showed that fresh and thawed shrimp exhibited darkening in color over time. Treatments with lactic acid were more blue than yellow. Treated samples developed less oxidation than the control. Psychrophilic counts for samples L and LG remained below the 7 log CFU/g threshold throughout the study. In fresh shrimp samples, the addition of just a gelatin coating was able to increase shelf life by three days, while the addition of lactic acid successfully lowered microbial counts and extended the shelf life by six days. The freeze–thaw cycle negatively affected the extension of shelf life in the G group. Full article

Emulsions are widely utilized in food systems but often face stability challenges due to environmental stresses, such as pH, ionic strength, and temperature fluctuations. Fish skin gelatin (FSG), a promising natural emulsifier, suffers from limited functional properties, restricting its broader application. This study explored the enhancement of emulsion stability in Litsea cubeba essential oil systems through the glycosylation of fish skin gelatin (FSG) with dextran via the dry Maillard reaction. Among dextrans of varying molecular weights (10 kDa, 100 kDa, 200 kDa, and 500 kDa), the 200 kDa dextran exhibited the best emulsification performance, achieving a remarkable 160.49% increase in stability index. The degree of grafting (DG) increased with molecular weight, peaking at 34.77% for the 500 kDa dextran, followed by 23.70% for the 200 kDa variant. The particle size of the FSG–Dex 200 kDa conjugate emulsion was reduced to 639.1 nm, compared to 1009–1146 nm for the unmodified FSG, while hydrophobicity improved by 100.56%. The zeta potential values approached 30 mV, indicating enhanced stability. Furthermore, glycosylation significantly improved antioxidant activity, as evidenced by increased radical scavenging capacity in both DPPH and ABTS assays. These findings underscore the potential of glycosylated FSG as a natural emulsifier in food applications. Full article

Fish skin-derived gelatin has garnered significant attention recently due to its abundant availability and promising bioactive properties. This comprehensive review elucidates various intricacies concerning fish skin-derived gelatin peptides, including their preparation techniques, bioactive profiles, underlying mechanisms, and methods for stability enhancement. The review investigates diverse extraction methods and processing approaches for acquiring gelatin peptides from fish skin, emphasizing their impact on the peptide composition and functional characteristics. Furthermore, the review examines the manifold bioactivities demonstrated by fish skin-derived gelatin peptides, encompassing antioxidant, antimicrobial, anti-inflammatory, and anticancer properties, elucidating their potential roles in functional food products, pharmaceuticals, and nutraceuticals. Further, mechanistic insights into the functioning of gelatin peptides are explored, shedding light on their interactions with biological targets and pathways. Additionally, strategies aimed at improving the stability of gelatin peptides, such as encapsulation, modification, and integration into delivery systems, are discussed to extend the shelf life and preserve the bioactivity. Overall, this comprehensive review offers valuable insights into using fish skin-derived gelatin peptides as functional ingredients, providing perspectives for future research endeavors and industrial applications within food science, health, and biotechnology. Full article

The application of fish gelatin (FG) is limited due to its poor mechanical properties and thermal stability, both of which could be significantly improved by gellan gum (GG) found in previous research. However, the FG/GG composite hydrogel was brittle and easily damaged by external forces. It was found that the composite hydrogel with Fe₂(SO₄)₃ showed good flexibility and self-healing properties in the pre-experiment. Thus, the synergistic effect of FG, GG and Fe₂(SO₄)₃ on the mechanical properties of the composite hydrogel was investigated in this study. According to one-way experiments, response surface tests and Texture Profile Analysis, it was found that under the optimum condition of FG concentration 186.443 g/L, GG concentration 8.666 g/L and Fe₂(SO₄)₃ concentration 56.503 g/L, the springiness of the composite cylindrical hydrogel with the height of 25 mm formed in 25 mL beakers (bottom diameter 30 mm) was 7.602 mm. Determination of the rheological properties, compression performance, adhesive performance and self-healing properties showed that the composite hydrogel had good thermal stability, flexibility and self-healing properties with good adhesion, skin compliance and compressive strength, and it was easy to remove. The composite hydrogel showed strong antimicrobial activity against A. salmonicida and V. parahaemolyticus. All hydrogels showed a uniform and porous structure. The 3D structure of the composite hydrogel was much looser and more porous than the pure FG hydrogel. The flexible and self-healing composite hydrogel with some antimicrobial activity is suitable for the development of medical dressings, which broadens the applications of the composite hydrogel. Full article

This study evaluated possible utilization of infrared drying (ID) as an alternative to spray- (SD) and freeze-drying (FD) for fish skin-derived gelatins. Physical, functional, thermal, and spectroscopic analyses were conducted for characterization of the resulting gelatin powders. Energy consumption for the applied drying methods were 3.41, 8.46 and 25.33 kWh/kg for ID, SD and FD respectively, indicating that ID had the lowest energy consumption among the studied methods. Gel strength, on the other hand, was lower (398.4 g) in infrared-dried gelatin (ID-FG) compared to that (454.9 g) of freeze-dried gelatin (FD-FG) and that (472.7 g) of spray-dried gelatin (SD-FG). TGA curves indicated that ID-FG showed more resilience to thermal degradation. SDS-PAGE and UV-Vis spectra indicated that slight degradation was observed in the β-configuration of ID-FG. ID-FG and SD-FG gelatins had the highest water holding capacity (WHC), protein solubility and transparency values compared to that of FD-FG. Morphological structures of the samples were quite different as shown by SEM visuals. Ultimately, the findings showed that infrared drying may be a promising alternative for gelatin processing, maintaining product quality and supporting sustainable practices in food and other industries. Full article

Hydrogels have the ability to retain large amounts of water within their three-dimensional polymer matrices. These attractive materials are used in medicine and the food industry; they can serve as the basis for structured food products, additives, and various ingredients. Gelatin is one of widely used biopolymers to create hydrogels that exhibit biocompatibility and tunable rheological properties. In this study, we offer a comparative analysis of rheological properties of gelatin-based hydrogels (C = 6.67%), including mammalian gelatins from bovine and porcine skins and fish gelatins from commercial samples and samples extracted from Atlantic cod skin. Mammalian gelatins provide high strength and elasticity to hydrogels. Their melting point lies in the range from 22 to 34 °C. Fish gelatin from cod skin also provides a high strength to hydrogels. Commercial fish gelatin forms weak gels exhibiting low viscoelastic properties and strength, as well as low thermal stability with a melting point of 7 °C. Gelatins were characterized basing on the analysis of amino acid composition, molecular weight distribution, and biopolymer secondary structure in gels. Our research provides a unique rheological comparison of mammalian and fish gelatin hydrogels as a tool for the re-evaluation of fish skin gelatin produced through circular processes. Full article

The present study investigated the potential use of blackmouth catshark (Galeus melastomus) skins for gelatin production by employing a combined alkaline and acidic process. The yield of dry gelatin was relatively high (13.95%), showing a high protein content (87.80%), but low moisture (10.64%), ash (1.34%) and lipid (0.03%) contents, on a wet weight basis. Fish skin gelatin showed better color properties (>L*, <+b* values) than porcine skin gelatin and exhibited similar gel strength (315.4 g) and higher viscosity (5.90 cP) than the latter (p < 0.05). Although the electrophoretic study revealed that fish skin gelatin was degraded to a lesser extent than its mammalian counterpart, the resulting fish skin gelatin gels melted at a significantly lower temperature (T_m = 21.5 °C), whereas the reverse process (i.e., gelling) also occurred at a lower temperature (T_s = 10.6 °C) and required more time (t_s = 29.5 min) compared to porcine skin gelatin gels (T_m = 30.4 °C, T_s = 19.4 °C and t_s = 20.7 min). These differences were attributed to the different imino acid content, which was greater in mammalian gelatin (p < 0.05). The results suggested that the skins from blackmouth catshark can be potentially used as an alternative raw material for gelatin production, which will fill the needs of more diverse cultures that do not consume pork- or cow-related products. Full article