Search Results (42)

The poultry industry produces significant quantities of keratin-rich waste, primarily feathers, whose traditional disposal methods—incineration or chemical treatment—result in environmental damage and resource depletion. This research introduces a sustainable biotechnological method for the valorization of feather waste utilizing Gordonia alkanivorans S7, an actinomycete strain extracted from petroleum plant sludge. This is the inaugural publication illustrating keratinolytic activity in the Gordonia genus. The optimization of the degradation process via the Taguchi approach led to the effective biodegradation of untreated home chicken feathers, achieving dry mass loss of up to 99% after 168 h in a mineral medium. The agricultural potential of the obtained keratin hydrolysate, which was high in organic components (C 31.2%, N 8.9%, H 5.1%, and S 1.7%), was assessed. Phytotoxicity tests demonstrated that the feather hydrolysate led to better growth of the indicator plants—Sorghum saccharatum and Lepidium sativum. The highest values of root growth stimulation were 26% for S. saccharatum and 31% for L. sativum, at a dose of 0.01%. Shoot growth stimulation was noted only for L. sativum, reaching 38% (0.01%), 53% (0.05%), and 37% (0.1%), as compared to the control sample. These results demonstrate the process’s combined economic and environmental benefits, providing a fresh approach to the production of bio-based plant biostimulants and sustainable keratin waste management. Full article

This study aimed to investigate the effects of Nano-cAMP on growth performance, gut development, and microbiota composition in broilers. A total of 108 21-day-old yellow-feathered female chicks were randomly divided into three groups with six replicates per group and six chicks per replicate according to the principle of consistent body weight. Experimental treatments included the following: (1) CON group (basal diet), (2) cAMP group (basal diet + 0.02 g/kg cAMP), and (3) Nano-cAMP group (basal diet + 0.37 g/kg Nano-cAMP liposomes). After a 21-day experimental period, results revealed the following: Compared with the CON group, the Nano-cAMP group exhibited a significantly reduced feed-to-gain ratio (p < 0.05). The cAMP group exhibited a significant increase in duodenal index (p < 0.05), whereas the Nano-cAMP group demonstrated greater jejunal villus height (p < 0.05). Both treatment groups showed significant upregulation of cholecystokinin (CCK) and secretin gene expression (p < 0.05). Analysis of alpha-diversity indices (Chao1, Shannon, Simpson) revealed no significant differences in jejunal and cecal microbiota composition between experimental groups (p > 0.05). Notably, the relative abundance of Firmicutes significantly increased (p < 0.05) in the cAMP and Nano-cAMP groups, whereas Proteobacteria, Gemmatimonadota, and Chloroflexi significantly decreased (p< 0.05). The combined relative abundance of three Lactobacillus genera and Bifidobacterium was obviously elevated. Linear discriminant analysis identified Bifidobacterium, Ruminococcus torques group, and uncultured_Thermoanaerobacterales_bacterium as dominant genera in the intestinal tract of Nano-cAMP group. In conclusion, dietary addition of Nano-cAMP promotes jejunal development, modulates appetite hormones mRNA expression, enhances absorption capacity, increases the relative abundance of intestinal probiotics such as Bifidobacterium and cellulose-degrading bacteria such as Ruminococcus torques group, optimizes gut microbiota composition, and ultimately reduces the feed-to-gain ratio in broilers. Full article

The increasing environmental concerns regarding plastic waste, especially in agriculture, have driven the search for sustainable alternatives. Agricultural plastics, such as mulching films and greenhouse covers, are heavily reliant on petrochemical-derived materials, which persist in the environment and contribute to long-term pollution. This study explores the use of biodegradable biocomposites made from steam explosion-treated chicken feathers and various polymer matrices to address these issues. Chicken feathers, a waste by-product of the poultry industry, present an excellent biodegradability as a result of the steam explosion treatment and contain nitrogen, potentially enhancing soil fertility. The biocomposites were characterized by thermal stability, mechanical properties, and biodegradability, and ecotoxicity assessments were carried out studying the incorporation of feathers into the soil. Results showed that the incorporation of treated chicken feathers increased the water absorption capacity of the composites, promoting faster disintegration and biodegradation. In particular, biocomposites made with polyhydroxyalkanoates and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) exhibited a significant increase in degradation rates, from 3–10% in the first month for pure matrices to 40–50% when reinforced with treated feathers. Meanwhile, those made from polylactic acid showed slower degradation. Furthermore, the addition of feathers positively influenced crop growth at low concentrations, acting as a slow-release fertilizer. However, high concentrations of feathers negatively affect plant growth due to excess nitrogen. These findings highlight the potential of poultry feathers as a valuable, sustainable filler for agricultural bioplastics, contributing to waste valorization and environmentally friendly farming practices. Full article

In this study, an effective feather-degrading bacterium was isolated and the solid-state fermentation condition for feather degradation was optimized. The resulting fermented feather meal (FFM) was evaluated for its bioavailability in broilers. Four Bacillus strains were examined for feather degradation rates, with Bacillus velezensis PN1 exhibiting the highest rate (83.24%, p < 0.05). A 3 × 3 × 3 factorial design was used to test substrate moisture content (45%, 55%, 65%), temperature (27 °C, 37 °C, 47 °C), and incubation time (24, 48, 72 h) for optimized fermentation conditions. In vitro pepsin digestibility (IVPD) revealed a significant interaction between temperature and time (p < 0.05), and the optimal performance was achieved at 37 °C for 72 h, followed by 37 °C for 48 h. Considering production time and cost, FFM2 (produced with 65% moisture at 37 °C for 48 h) was further compared with FFM1 (produced under the same conditions but at a lower temperature of 27 °C), and commercial hydrolyzed feather meal (HFM). IVPD did not differ significantly between FFM1, FFM2, and HFM, as they all showed significantly higher digestibility compared to raw feathers (RFs). FFM1, as well as FFM2, had significantly higher histidine and lysine concentrations than RF (p < 0.05), while FFM2 had a significantly lower cysteine content (p < 0.05). Based on fermentation conditions and amino acid composition, FFM2 was considered more suitable for large-scale production and was used in a broiler growth trial. The inclusion of 5% FFM2 in the broiler diet did not significantly affect body weight at 35 days compared to the 5% HFM group (p > 0.05), although both groups showed significantly lower weight gain than the 5% fish meal (FM) group (p < 0.05). The feed conversion ratio and performance efficiency factor did not differ significantly between the FFM2, HFM, and FM groups (p > 0.05). In groups fed diets without supplemental crystalline amino acids, growth performance did not significantly differ between the HFM and FFM2 groups (p > 0.05), although both performed significantly worse than groups with amino acid supplementation. In conclusion, FFM produced by B. velezensis PN1 through solid-state fermentation enhances feather bioavailability in poultry and can completely replace HFM when included at 5% in broiler diets, offering a potential sustainable alternative for poultry nutrition on a commercial scale. Full article

Caldanaerobacter subterraneus subsp. keratinolyticus subsp. nov. strain KAk was isolated from a geothermal hot spring located in Kazakhstan. Growth occurred at temperatures ranging from 50 to 80 °C, with approximately 70 °C as optimum. It also thrived in pH conditions ranging from 4.0 to 9.0, with the best growth occurring at 6.8. Under optimal conditions in a glucose-containing medium, the cells were predominantly observed singly, in pairs, or less frequently in chains, and did not form endospores. However, under conditions involving growth with merino wool or feathers, or under suboptimal conditions, the cells of strain KAk exhibited a notably elongated and thinner morphology, with lengths ranging from 5 to 8 µm, and spores were observed. The KAk strain exhibited efficient degradation of feather keratin and merino wool at temperatures ranging from 65 to 70 °C. Analysis of the 16S rRNA gene sequence placed KAk within the genus Caldanaerobacter, family Thermoanaerobacteraceae, with the highest similarity to C. subterraneus subsp. tengcongensis MB4^T (98.84% sequence identity). Furthermore, our analysis of the draft genome sequence indicated a genome size of 2.4 Mbp, accompanied by a G+C value of 37.6 mol%. This study elucidated the physiological and genomic characteristics of strain KAk, highlighting its keratinolytic capabilities and distinctiveness compared to other members of the genus Caldanaerobacter. Full article

To standardize, systematize, and improve the efficiency of the evaluation of biodegradable materials for large-scale biogas projects to support clean and sustainable energy development in emerging economies from a sub-Saharan African perspective, this paper analyzes and fits the potential for methane production (biochemical methane potential, BMP) and degradation kinetics of materials based on the gas production and degradation dynamics obtained from methane potential experiments. The first-order, modified first-order, and Gompertz models are used for analysis and fitting. The Gompertz model shows higher accuracy in fitting the methane production potential curve of screened materials, and the fitted methane potential values are close to the experimental values. When using BMP_1% (cumulative gas production reaching 1% of cumulative gas production per day) as a quantitative indicator for the methane production potential of materials, the cumulative methane production reaches over 85% of the cumulative methane production at the end of the experiment. The BMP test time is shortened by 26.98% to 72.06%. Among the screened materials, the methane production potential (calculated using BMP_1%) of dry rice straw, maize leaves, fresh rice, soybean straw, maize stalks, chicken manure hydrolysate, chicken feathers, kitchen/food waste, and chicken offal are 234.14, 241.01, 253.34, 331.40, 305.80, 508.41, 510.10, 630.7, and 621.32 mL/g, respectively. The kinetic parameters show that among the nine materials, cellulose materials (except for maize stalks and soybean straw), chicken manure, and kitchen waste are easily degradable materials. In contrast, chicken feathers and offal are slowly degradable materials. The study posits that comparing standardized methane production potential and methane production kinetic parameters among materials improves the efficiency of screening materials and is critical for biogas projects. Full article

Bird feathers have several functions, including flight, insulation, communication, and camouflage. Since feathers degrade over time, birds need to moult regularly to maintain these functions. However, environmental factors like food scarcity, stress, and parasite infections can affect feather quality and moult speed. This study examined the impact of avian haemosporidian infection and uropygial gland volume, as well as feather quality and feather growth rate in two migratory hirundine species captured in southwestern Spain—the house martin (Delichon urbicum) and sand martin (Riparia riparia). Our findings showed that the prevalence of infection varied among species, with house martins having the highest rates, possibly due to their larger colony size. Moreover, haemosporidian infection had a different impact on each species; infected house martins exhibited lower feather quality than healthy individuals, although this outcome was not observed in sand martins. Furthermore, no effect of infection on feather growth rate was observed in both hirundinids. Additionally, feather growth rate only correlated positively with feather quality in house martins. Finally, no link was observed between uropygial gland volume and feather quality or feather growth rate in any of the species in this study. These findings highlight the effect of haemosporidian infections on the plumage of migratory birds, marking, for the first time, how avian haemosporidian infection is shown to adversely impact feather quality. Even so, further research is needed to explore these relationships more deeply. Full article

Psittacofulvins are polyenal dyes responsible for coloring parrot feathers and protecting them against photo-oxidation, harmful radicals, and bacterial degradation. To explain the unusual properties of these compounds, the thermodynamic and global chemical activity descriptors characterizing four natural and three synthetic psittacofulvins, as well as their hydroxyl, carboxyl and dialdehyde derivatives, were determined. To this aim, the DFT method at the B3LYP/QZVP theory level and the C-PCM solvation model were used. The calculations enabled the selection of the projected compounds for the greatest bioactivity and potential applicability as multifunctional ingredients in medicines, cosmetics, supplements, and food, in which they may play a triple role as preservative, radical scavenger, and coloring agent. The results obtained provide arguments for the identification of a fifth psittacofulvin within the parrot feather pigment, characterized by ten conjugated double bonds (docosadecaenal). Full article

Microbial degradation of feathers offers potential for bioremediation, yet the microbial response mechanisms warrant additional investigation. In prior work, Pseudomonas aeruginosa Gxun-7, which demonstrated robust degradation of feathers at elevated concentrations, was isolated. However, the molecular mechanism of this degradation remains only partially understood. To investigate this, we used RNA sequencing (RNA-seq) to examine the genes that were expressed differentially in P. aeruginosa Gxun-7 when exposed to 25 g/L of feather substrate. The RNA-seq analysis identified 5571 differentially expressed genes; of these, 795 were upregulated and 603 were downregulated. Upregulated genes primarily participated in proteolysis, amino acid, and pyruvate metabolism. Genes encoding proteases, as well as those involved in sulfur metabolism, phenazine synthesis, and type VI secretion systems, were notably elevated, highlighting their crucial function in feather decomposition. Integration of Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) taxonomies, combined with a review of the literature, led us to propose that metabolic feather degradation involves environmental activation, reducing agent secretion, protease release, peptide/amino acid uptake, and metabolic processes. Sulfite has emerged as a critical activator of keratinase catalysis, while cysteine serves as a regulatory mediator. qRT–PCR assay results for 11 selected gene subset corroborated the RNA-seq findings. This study enhances our understanding of the transcriptomic responses of P. aeruginosa Gxun-7 to feather degradation and offers insights into potential degradation mechanisms, thereby aiding in the formulation of effective feather waste management strategies in poultry farming. Full article

L-cysteine is a proteogenic amino acid with many applications in the pharmaceutical, food, animal feed, and cosmetic industries. Due to safety and environmental issues in extracting L-cysteine from animal hair and feathers, the fermentative production of L-cysteine offers an attractive alternative using renewable feedstocks. Strategies to improve microbial production hosts like Pantoea ananatis, Corynebacterium glutamicum, Pseudomonas sp., and Escherichia coli are summarized. Concerning the metabolic engineering strategies, the overexpression of feedback inhibition-insensitive L-serine O-acetyltransferase and weakening the degradation of L-cysteine through the removal of L-cysteine desulfhydrases are crucial adjustments. The overexpression of L-cysteine exporters is vital to overcome the toxicity caused by intracellular accumulating L-cysteine. In addition, we compiled the process engineering aspects for the bioproduction of L-cysteine. Utilizing the energy-efficient sulfur assimilation pathway via thiosulfate, fermenting cheap carbon sources, designing scalable, fed-batch processes with individual feedings of carbon and sulfur sources, and implementing efficient purification techniques are essential for the fermentative production of L-cysteine on an industrial scale. Full article

In recent decades, there has been an increasing focus on the alarming decline in global bee populations, given their critical ecological contributions to natural pollination and biodiversity. This decline, marked by a substantial reduction in bee colonies in forested areas, has serious implications for sustainable beekeeping practices and poses a broader risk to ecological well-being. Addressing these pressing issues requires innovative solutions, one of which involves the development and fabrication of beehives crafted from composite materials that are ecologically compatible with bee biology. Importantly, these materials should also exhibit a high resistance to environmental factors, such as ultraviolet (UV) radiation, in order to maintain their mechanical integrity and longevity. To investigate this, we conducted accelerated UV degradation tests on a variety of composite materials to rapidly assess their susceptibility to UV-induced changes. High-density polyethylene (HDPE) served as the matrix material and was reinforced with natural fibers, specifically fique fibers (Furcraea bedinghausii), banana fibers, and goose feathers. Our findings indicate that UV radiation exposure results in a noticeable reduction in the tensile strength of these materials. For example, wood composites experienced a 48% decline in tensile strength over a 60-day period, a rate of deterioration notably higher than that of other tested composite materials. Conversely, HDPE composites fortified with banana fibers initially demonstrated tensile strengths exceeding 9 MPa and 10 MPa. Although these values gradually decreased over the observation period, the composites still displayed favorable stress–strain characteristics. This research underscores the substantial influence of UV radiation on the longevity and efficacy of beehive materials, which in turn affects the durability of natural wood hives exposed to these environmental factors. The resultant increased maintenance and replacement costs for beekeepers further emphasize the need for judicious material selection in beehive construction and point to the viability of the composite materials examined in this study. Full article

Feather waste is a major issue from an economic and environmental point of view. Even though there are already routes for the valorisation of feathers into fertilisers and feather meal, these are considered to have low added value. For more attractive applications, for example in agricultural biodegradable plastics, higher and faster degradability in soil is required. To face this challenge alternative approaches to accelerate biodegradation and disintegration processes are needed. In this context, steam explosion appears as an effective technology to modify the structure of feather and improve its soil degradability. In this work, chicken feathers were treated by steam explosion and the effect of treatment on their structure and physico-chemical and thermal properties were evaluated. Finally, the effect of the process conditions on the disintegration and biodegradation in soil of feathers was also investigated, finding an increased degradation in soil of steam explosion treated feathers. These results open up the possibilities of using feather waste as a component for environmentally friendly agricultural bioplastics that can be degraded in-situ in soil. Full article

In this study, we describe the characterization of three efficient chicken feather-degrading Streptomyces bacteria isolated from honeybee samples and assess the impact of their co-cultivation on this activity and antistaphylococcal activity. Streptomyces griseoaurantiacus AD2 was the strain showing the highest keratinolytic activity (4000 U × mL⁻¹), followed by Streptomyces albidoflavus AN1 and Streptomyces drozdowiczii AD1, which both generated approximately 3000 U × mL⁻¹. Moreover, a consortium constituted of these three strains was able to use chicken feathers as its sole nutrient source and growth in such conditions led to a significant increase in antibiotic production. S. griseoaurantiacus AD2 was the only strain that exhibited weak antimicrobial activity against Staphylococcus aureus. UPLC analyses revealed that a significant number of peaks detected in the extracts of co-cultures of the three strains were missing in the extracts of individual cultures. In addition, the production of specialized metabolites, such as undecylprodigiosin and manumycin A, was clearly enhanced in co-culture conditions, in agreement with the results of the antimicrobial bioassays against S. aureus. Our results revealed the benefits of co-cultivation of these bacterial species in terms of metabolic wealth and antibiotic production. Our work could thus contribute to the development of novel microbial-based strategies to valorize keratin waste. Full article

Two efficient feather-degrading bacteria were isolated from honeybee samples and identified as Bacillus sonorensis and Bacillus licheniformis based on 16S rRNA and genome sequencing. The strains were able to grow on chicken feathers as the sole carbon and nitrogen sources and degraded the feathers in a few days. The highest keratinase activity was detected by the B. licheniformis CG1 strain (3800 U × mL⁻¹), followed by B. sonorensis AB7 (1450 U × mL⁻¹). Keratinase from B. licheniformis CG1 was shown to be active across a wide range of pH, potentially making this strain advantageous for further industrial applications. All isolates displayed antimicrobial activity against Micrococcus luteus; however, only B. licheniformis CG1 was able to inhibit the growth of Mycobacterium smegmatis. In silico analysis using BAGEL and antiSMASH identified gene clusters associated with the synthesis of non-ribosomal peptide synthetases (NRPS), polyketide synthases (PKSs) and/or ribosomally synthesized and post-translationally modified peptides (RiPPs) in most of the Bacillus isolates. B. licheniformis CG1, the only strain that inhibited the growth of the mycobacterial strain, contained sequences with 100% similarity to lichenysin (also present in the other isolates) and lichenicidin (only present in the CG1 strain). Both compounds have been described to display antimicrobial activity against distinct bacteria. In summary, in this work, we have isolated a strain (B. licheniformis CG1) with promising potential for use in different industrial applications, including animal nutrition, leather processing, detergent formulation and feather degradation. Full article

In this paper, initial experiments were carried out to determine the possibility of using chicken feathers instead of sand in mortar. After earlier research suggested that chicken feathers had a high durability and resilience to degradation, chicken feathers recovered from slaughterhouses were chosen due to the significant cross-linking and strong bonding within their structure. Compared to natural sand, chicken feather sand (CFS) works as an eco-friendly resource. In this study, the chicken feather content ranged from 5% to 25% of the total volume of fine aggregates. The findings confirmed that the compressive strengths of the specimens are inversely proportional to the amount of feathers added. The specimen with 10% CFS had a compressive strength of 57.8 MPa after 28 days of curing. As the weight of CFS in the mortar increased from 1.26% to 10% of the control mixture, the workability significantly decreased. After soaking in water for 24 h, materials with higher proportions of feathers had a noticeably decreased compressive and flexural strength as well as increased water absorption and swelling. For 80% of the CFS replacement, the results are good. Additional CFS replacement tends to reduce the mortar weight. Full article