Search Results (6)

Salmonella spp. represent a food safety risk in the production chain because of their potential for biofilm development. This study examined the biofilm formation of eight Salmonella serotypes from diverse foodborne outbreaks on three food-contact surfaces, stainless steel, silicone, and nylon, at 10 °C and 37 °C. The effect of temperature was observed in slower biofilm formation at 10 °C with about 5-log (cfu/cm²) after 24 h, contrasting with 7-log (cfu/cm²) at 37 °C. The material also influenced biofilm formation, with the strongest biofilms on stainless steel at 10 °C and silicone at 37 °C. The serotypes producing the strongest biofilms were S. Enteritidis, S. Saint Paul, and S. Montevideo. The weakest serotypes were S. Senftenberg, S. Anatum, and the avirulent S. Typhimurium. The production of extra-polymeric substances was evident with S. Enteritidis. The biofilm index showed the highest value for low temperature, nylon, and silicone, and for S. Montevideo, S. Enteritidis, and S. Saint Paul. The whole-genome sequencing of each serovar suggested that single nucleotide polymorphisms in the curli (csg) genes may have contributed to the strong biofilm-forming ability of S. Montevideo and S. Saint Paul and the weaker ability of S. Senftenberg. These results can help with the correct development of sanitizing interventions based on the Salmonella strain of concern. Full article

Biofilms are a major problem in hard-to-heal wounds. Moreover, they are composed of different species and are often tolerant to antimicrobial agents. At the same time, interspecific synergy and/or competition occurs when some bacterial species clash. For this reason, the tolerance of two dual-species wound biofilm models of Pseudomonas aeruginosa and Staphylococcus aureus or Enterococcus faecium against antimicrobials and antimicrobial dressings were analyzed quantitatively and by confocal laser scanning microscopy (CLSM). The results were compared to findings with planktonic bacteria. Octenidine-dihydrochloride/phenoxyethanol and polyhexamethylene biguanide (PHMB) irrigation solutions showed a significant, albeit delayed reduction in biofilm bacteria, while the PHMB dressing was not able to induce this effect. However, the cadexomer-iodine dressing caused a sustained reduction in and killed almost all bacteria down to 10² cfu/mL within 6 days compared to the control (10¹⁰ cfu/mL). By means of CLSM in untreated human biofilm models, it became evident that P. aeruginosa dominates over E. faecium and S. aureus. Additionally, P. aeruginosa appeared as a vast layer at the bottom of the samples, while S. aureus formed grape-like clusters. In the second model, the distribution was even clearer. Only a few E. faecium were visible, in contrast to the vast layer of P. aeruginosa. It seems that the different species avoid each other and seek their respective niches. These mixed-species biofilm models showed that efficacy and tolerance to antimicrobial substances are nearly species-independent. Their frequent application appears to be important. The bacterial wound biofilm remains a challenge in treatment and requires new, combined therapy options. Full article

Over the few past decades, the concept of microbial sulfur cycling catalyzing the precipitation of CaMg (CO₃)₂ at low temperatures (<40 °C) has been studied intensely. In this respect, two hypersaline lagoons, Lagoa Vermelha and Brejo do Espinho, in Brazil, have been the subject of numerous studies investigating sedimentary Ca/Mg carbonate formation. Here, we present the sulfur and oxygen isotopic compositions of dissolved sulfate from surface water, as well as sulfate and sulfide from pore-water (δ³⁴S_SO4, δ¹⁸O_SO4, and δ³⁴S_H2S), the sulfur isotopic composition of sedimentary pyrite (δ³⁴S_CRS), and sulfur and oxygen isotopic compositions of carbonate-associated sulfate (CAS, δ³⁴S_CAS and δ¹⁸O_CAS). The pore-water profiles at Lagoa Vermelha indicate ongoing bacterial sulfate reduction by increasing δ³⁴S_SO4, δ¹⁸O_SO4 and δ³⁴S_CRS values downcore. At Brejo do Espinho, the pore-water profiles displayed no depth-dependent isotope trends; the Ca/Mg ratio was, on average, lower, and the δ¹⁸O_SO4 values in both surface and pore-water were strongly enriched in ¹⁸O. There was an overall mismatch between δ³⁴S_SO4 and the significantly higher δ³⁴S_CAS values. A negative correlation was observed between the Ca/Mg ratio and higher δ³⁴S_CAS values. The results show that the size difference between the two lagoons induces differences in the intensity of evaporation, which leads to the increased secretion of extrapolymeric substances (EPSs) by microbes in the smaller Brejo do Espinho. EPS provides the microenvironment where Ca/Mg carbonate can nucleate and preserve increased δ³⁴S_CAS values. Apart from EPS, increased sulfur oxidation is proposed to be a second factor causing relative enrichment of Ca/Mg carbonates at Brejo do Espinho. Our results emphasize the role of evaporative processes on Ca/Mg carbonate formation, and indicate that the respective δ³⁴S_CAS values reflect microenvironments rather than preserving an open marine δ³⁴S_SO4 signature. Full article

Candida parapsilosis is the major non-C. albicans species involved in the colonization of central venous catheters, causing bloodstream infections. Biofilm formation on medical devices is considered one of the main causes of healthcare-associated infections and represents a global public health problem. In this context, the development of new nanomaterials that exhibit anti-adhesive and anti-biofilm properties for the coating of medical devices is crucial. In this work, we aimed to characterize the antimicrobial activity of two different coated-surfaces, graphene oxide (GO) and curcumin-graphene oxide (GO/CU) for the first time, against C. parapsilosis. We report the capacity of GO to bind and stabilize CU molecules, realizing a homogenous coated surface. We tested the anti-planktonic activity of GO and GO/CU by growth curve analysis and quantification of Reactive Oxigen Species( ROS) production. Then, we tested the antibiofilm activity by adhesion assay, crystal violet assay, and live and dead assay; moreover, the inhibition of the formation of a mature biofilm was investigated by a viability test and the use of specific dyes for the visualization of the cells and the extra-polymeric substances. Our data report that GO/CU has anti-planktonic, anti-adhesive, and anti-biofilm properties, showing a 72% cell viability reduction and a decrease of 85% in the secretion of extra-cellular substances (EPS) after 72 h of incubation. In conclusion, we show that the GO/CU conjugate is a promising material for the development of medical devices that are refractory to microbial colonization, thus leading to a decrease in the impact of biofilm-related infections. Full article

Arsenic (As), distributed widely in the natural environment, is a toxic substance which can severely impair the normal functions in living cells. Research on the genetic determinants conferring functions in arsenic resistance and metabolism is of great importance for remediating arsenic-contaminated environments. Many organisms, including bacteria, have developed various strategies to tolerate arsenic, by either detoxifying this harmful element or utilizing it for energy generation. More and more new arsenic resistance (ars) determinants have been identified to be conferring resistance to diverse arsenic compounds and encoded in ars operons. There is a hazard in mobilizing arsenic during gold-mining activities due to gold- and arsenic-bearing minerals coexisting. In this study, we isolated 8 gold enrichment strains from the Zijin gold and copper mine (Longyan, Fujian Province, China) wastewater treatment site soil, at an altitude of 192 m. We identified two Brevundimonas nasdae strains, Au-Bre29 and Au-Bre30, among these eight strains, having a high minimum inhibitory concentration (MIC) for As(III). These two strains contained the same ars operons but displayed differences regarding secretion of extra-polymeric substances (EPS) upon arsenite (As(III)) stress. B. nasdae Au-Bre29 contained one extra plasmid but without harboring any additional ars genes compared to B. nasdae Au-Bre30. We optimized the growth conditions for strains Au-Bre29 and Au-Bre30. Au-Bre30 was able to tolerate both a lower pH and slightly higher concentrations of NaCl. We also identified folE, a folate synthesis gene, in the ars operon of these two strains. In most organisms, folate synthesis begins with a FolE (GTP-Cyclohydrolase I)-type enzyme, and the corresponding gene is typically designated folE (in bacteria) or gch1 (in mammals). Heterologous expression of folE, cloned from B. nasdae Au-Bre30, in the arsenic-hypersensitive strain Escherichia coli AW3110, conferred resistance to As(III), arsenate (As(V)), trivalent roxarsone (Rox(III)), pentavalent roxarsone (Rox(V)), trivalent antimonite (Sb(III)), and pentavalent antimonate (Sb(V)), indicating that folate biosynthesis is a target of arsenite toxicity and increased production of folate confers increased resistance to oxyanions. Genes encoding Acr3 and ArsH were shown to confer resistance to As(III), Rox(III), Sb(III), and Sb(V), and ArsH also conferred resistance to As(V). Acr3 did not confer resistance to As(V) and Rox(V), while ArsH did not confer resistance to Rox(V). Full article

Heavy metals from various natural and anthropogenic sources are becoming a chief threat to the aquatic system owing to their toxic and lethal effect. The treatment of such contaminated wastewater is one of the prime concerns in this field. For decades, a huge array of innovative biosorbents is used for heavy metal removal. Though extensive microbes and their biomolecules have been experimented and have showed great potential but most of them have failed to have the substantial breakthrough for the practical application. The present review emphasis on the potential utilization of the cyanobacteria for the heavy metal removal along with the toxic effect imposed by the pollutant. Furthermore, the effect of significant parameters, plausible mechanistic insights of the heavy metal toxicity imposed onto the cyanobacteria is also discussed in detail. The role of extrapolymeric substances and metallothionein secreted by the microbes are also elaborated. The review was evident that the cyanobacterial species have a huge potential towards the heavy metal removal from the aqueous system ranging from very low to very high concentrations. Full article