Search Results (39)

This study presents a standardized method for multimodal monitoring of exercise execution in isolated, confined, and extreme (ICE) environments, addressing the need for reproducible assessment of neuromuscular and cardiovascular responses under space- and equipment-limited conditions. The method integrates wearable surface electromyography (sEMG), inertial measurement units (IMU), and electrocardiography (ECG) to capture muscle activation, movement, and cardiac dynamics during space-efficient exercise. Ten exercises suitable for confined habitats were implemented during analog missions conducted in the DeepLabH03 facility, with feasibility evaluated in a seven-day campaign involving three adult participants. Signals were synchronized using video-verified repetition boundaries, sEMG was normalized to maximum voluntary contraction, and sEMG amplitude- and frequency-domain features were extracted alongside heart rate variability indices. The protocol enabled stable real-time data acquisition, reliable repetition-level segmentation, and consistent detection of muscle-specific activation patterns across exercises. While amplitude-based sEMG indices showed no uniform main effect of exercise, robust exercise-by-muscle interactions were observed, and sEMG mean frequency demonstrated sensitivity to differences in movement strategy. Cardiac measures showed limited condition-specific modulation, consistent with short exercise bouts and small sample size. As a proof-of-concept feasibility study, the proposed protocol provides a practical and reproducible framework for multimodal physiological monitoring of exercise in ICE analogs and other constrained environments, supporting future studies on exercise quality, training load, and adaptive feedback systems. The protocol is designed to support near-real-time monitoring and forms a technical basis for future exercise-quality feedback in confined habitats. Full article

Obtaining stable ECG signals under both static and dynamic conditions, while ensuring comfortable wear, is a prerequisite for fabric-electrode applications. It is necessary to study the wearing pressure of fabric electrodes as well as their organizational structure. In this study, fabric electrodes with different organizational structures (plain weave, twill weave, and satin weave) were prepared using silver-plated nylon conductive yarns as weft yarns and polyester yarns as warp yarns. The electrical characteristics of these structures of fabric electrodes were analyzed under different wearing pressures (2 kPa, 3 kPa, 4 kPa, and 5 kPa), and their effects on the quality of static and dynamic ECG signals acquired from human body were examined. The results showed that the contact impedance of the twill and satin weave structured electrodes with the skin was smaller and more stable than that of the plain weave structured electrodes. Furthermore, when a wearing pressure of 3–4 kPa was applied to the satin-structured electrodes, they not only provided satisfactory comfort but also collected stable static and dynamic ECG signals during daily exercise. These results can provide a reference for the application of fabric electrodes in ECG monitoring devices and an important basis for the design of intelligent ECG clothing. Full article

The electrocardiogram (ECG) signal plays a crucial role in medical diagnosis, home care, and exercise intensity assessment. However, traditional ECG monitoring devices are difficult to blend with users’ daily routines due to their lack of portability, poor wearability, and inconvenient electrode usage methods. Therefore, utilizing reusable and cost-effective flexible bioelectrodes (with a signal-to-noise ratio of 33 dB), a miniaturized wearable system (MWS) is proposed for unconstrained ECG monitoring, which holds a size of 65 × 52 × 12 mm³ and a weight of 69 g. Given these compelling features, this system enables reliable and high-quality ECG signal monitoring in individuals’ daily activities, including sitting, walking, and cycling, with the acquired signals exhibiting distinguishable QRS characteristics. Furthermore, an exercise intensity classification model was developed based on ECG characteristics and a fully connected neural network (FCNN) algorithm, with an evaluation accuracy of 98%. These results exhibit the promising potential of the MWS in tracking individuals’ physiological signals and assessing exercise intensity. Full article

To address the issues of poor comfort and limited mobility associated with traditional ECG monitoring systems, this study developed a chest strap ECG monitoring system (CEMS) utilizing silver-coated polyamide yarn. This system can continuously capture high-quality ECG signals during daily activities such as walking and running, without restricting the user’s movement. Real-time data display and storage are enabled through a built-in Bluetooth module. Furthermore, leveraging these high-quality ECG signals, a classification model based on a fully connected neural network was constructed to evaluate exercise intensity by analyzing key ECG features. After 100 training epochs, the model achieved a classification accuracy of 98.7% for running intensity. The integration of this model with the CEMS enables effective tracking of ECG signals and accurate assessment of exercise intensity, offering a promising and practical solution for next-generation wearable signal monitoring systems. Full article

This work focuses on assessing the ECG signal quality of data collected with wearable devices specifically tailored for firefighters using machine learning techniques. Firefighters are at a heightened cardiac risk due to their challenging working conditions, making wearable sensors crucial for ongoing health monitoring. However, environmental factors such as the temperature, radiation, and moisture, significantly impact the performance of these sensors and the quality of the collected data. To address these challenges, this work explored supervised learning to classify ECG signals into acceptable and unacceptable segments using only eight cardiac features. Leveraging on the ScientISST MOVE dataset, which contains biosignals during various daily activities, the model achieved promising results, namely 88% accuracy and an 87% F1 score with just eight ECG features. Besides this, a case study was performed on ECG data gathered from firefighters under real-world conditions to further corroborate the proposed method. Such a validation exercise demonstrated how well the model performs for the assessment of signal quality in such dynamic, high-stress scenarios. Full article

Excessive exercise is a primary cause of sports injuries and sudden death. Therefore, it is vital to develop an effective monitoring technology for exercise intensity. Based on the noninvasiveness and real-time nature of an electrocardiogram (ECG), exercise ECG classification based on ECG features could be used for detecting exercise intensity. However, current R-peak detection algorithms still have limitations, especially in high-intensity exercise scenarios and in the presence of noise interference. Additionally, the features utilized for exercise ECG classification are not comprehensive. To address these issues, the following tasks have been accomplished: (1) a hybrid time–frequency-domain model, BILSTM-CNN, is proposed for R-peak detection by utilizing BILSTM, multi-scale convolution, and an attention mechanism; (2) to enhance the robustness of the detector, a preprocessing data generator and a post-processing adaptive filter technique are proposed; (3) to improve the reliability of exercise intensity detection, the accurate heart rate variability (HRV) features derived from the proposed BILSTM-CNN and comprehensive features are constructed, which include various descriptive features (wavelets, local binary patterns (LBP), and higher-order statistics (HOS)) tested by the feasibility experiments and optimized deep learning features extracted from the continuous wavelet transform (CWT) of exercise ECG signals. The proposed system is evaluated by real ECG datasets, and it shows remarkable effectiveness in classifying five types of motion states, with an accuracy of 99.1%, a recall of 99.1%, and an F1 score of 99.1%. Full article

Background/Objectives: This study aimed to explore machine learning approaches for predicting physical exertion using physiological signals collected from wearable devices. Methods: Both traditional machine learning and deep learning methods for classification and regression were assessed. The research involved 27 healthy participants engaged in controlled cycling exercises. Physiological data, including ECG, heart rate, oxygen saturation, and pedal speed (RPM), were collected during these sessions, which were divided into eight two-minute segments. Heart rate variability (HRV) was also calculated to serve as a predictive indicator. We employed two feature selection algorithms to identify the most relevant features for model training: Minimum Redundancy Maximum Relevance (MRMR) for both classification and regression, and Univariate Feature Ranking for Classification. A total of 34 traditional models were developed using MATLAB’s Classification Learner App, utilizing 20% of the data for testing. In addition, Long Short-Term Memory (LSTM) networks were trained on the top features selected by the MRMR and Univariate Feature Ranking algorithms to enhance model performance. Finally, the MRMR-selected features were used for regression to train the LSTM model for predicting continuous outcomes. Results: The LSTM model for regression demonstrated robust predictive capabilities, achieving a mean squared error (MSE) of 0.8493 and an R-squared value of 0.7757. The classification models also showed promising results, with the highest testing accuracy reaching 89.2% and an F1 score of 91.7%. Conclusions: These results underscore the effectiveness of combining feature selection algorithms with advanced machine learning (ML) and deep learning techniques for predicting physical exertion levels using wearable sensor data. Full article

This study introduces a novel meta-learning method to enhance diabetes detection using wearable sensor systems in smart health applications. Wearable sensor technology often needs to operate accurately across a wide range of users, each characterized by unique physiological and behavioral patterns. However, the specific data for a particular application or user group might be scarce. Moreover, collecting extensive training data from wearable sensor experiments is challenging, time-consuming, and expensive. In these cases, meta-learning can be particularly useful. This model can quickly adapt to the nuances of new users or specific applications with minimal data. Therefore, to solve the need for a huge amount of training data and to enable the application of artificial intelligence (AI) in data-scarce scenarios, a meta-learning method is proposed. This meta-learning model has been implemented to forecast diabetes, resolve cross-talk issues, and accurately detect R peaks from overlapping electrocardiogram (ECG) signals affected by movement artifacts, poor electrode contact, electrical interference, or muscle activity. Motion artifacts from body movements, external conditions such as temperature, humidity, and electromagnetic interference, and the inherent quality and calibration of the sensor can all contribute to noise. Contact quality between the sensor and the skin, signal processing errors, power supply variations, user-generated interference from activities like talking or exercising, and the materials used in the wearable device also play significant roles in the overall noise in wearable sensor data and can significantly distort the true signal, leading to erroneous interpretations and potential diagnostic errors. Furthermore, discrete wavelet transform (DWT) was also implemented to improve the quality of the data and enhance the performance of the proposed model. The demonstrated results confirmed that with only a limited amount of target data, the proposed meta-learning and DWT denoising method can adapt more quickly and improve the detection of diabetes compared to the traditional method. Therefore, the proposed system is cost-effective, flexible, faster, and adaptable, reduces the need for training data, and can enhance the accuracy of chronic disease detection such as diabetes for smart health systems. Full article

Remote patient-monitoring systems are helpful since they can provide timely and effective healthcare facilities. Such online telemedicine is usually achieved with the help of sophisticated and advanced wearable sensor technologies. The modern type of wearable connected devices enable the monitoring of vital sign parameters such as: heart rate variability (HRV) also known as electrocardiogram (ECG), blood pressure (BLP), Respiratory rate and body temperature, blood pressure (BLP), respiratory rate, and body temperature. The ubiquitous problem of wearable devices is their power demand for signal transmission; such devices require frequent battery charging, which causes serious limitations to the continuous monitoring of vital data. To overcome this, the current study provides a primary report on collecting kinetic energy from daily human activities for monitoring vital human signs. The harvested energy is used to sustain the battery autonomy of wearable devices, which allows for a longer monitoring time of vital data. This study proposes a novel type of stress- or exercise-monitoring ECG device based on a microcontroller (PIC18F4550) and a Wi-Fi device (ESP8266), which is cost-effective and enables real-time monitoring of heart rate in the cloud during normal daily activities. In order to achieve both portability and maximum power, the harvester has a small structure and low friction. Neodymium magnets were chosen for their high magnetic strength, versatility, and compact size. Due to the non-linear magnetic force interaction of the magnets, the non-linear part of the dynamic equation has an inverse quadratic form. Electromechanical damping is considered in this study, and the quadratic non-linearity is approximated using MacLaurin expansion, which enables us to find the law of motion for general case studies using classical methods for dynamic equations and the suitable parameters for the harvester. The oscillations are enabled by applying an initial force, and there is a loss of energy due to the electromechanical damping. A typical numerical application is computed with Matlab 2015 software, and an ODE45 solver is used to verify the accuracy of the method. Full article

Background: Understanding the responses of the cardio and respiratory systems during exercise, as well as their coupling in post-exercise recovery, is important for the prescription of exercise programs in physically recreative subjects. Aim: In this work, we aimed to set up an adjusted experiment to evaluate the relations and changes in parameters obtained from an analysis of cardiac and respiratory signals under three physiological conditions: relaxation, exercise, and post-exercise recovery. Material and Methods: Simultaneously recorded ECG (RR intervals) and respiratory signal during relaxation, bicycle ergometry exercise until submaximal heart rate (HR), and recovery in 10 healthy men were analyzed. The exercise included consecutive phases of 3 min in duration with a constant workload. Parasympathetic cardiac control (RMSSD), heart rate (HR), breathing frequency (BF), and respiratory cycle amplitude (RCA) were calculated. Anthropometric data were also collected. Results: Based on time series analysis, our results show that: (1) during exercise, an increase in HR was related to a reduction in HR variability and RMSSD, while an increase in BF was related to an increase in RCA, and (2) during recovery, HR and RCA significantly decreased, while RMSSD had a biphasic response. The results of multiple linear regressions showed that the averaged HR, RMSSD, and BF during 3 min segments of recovery were determined by several calculated and collected parameters. Conclusions: The parameters from the analysis of respiratory signals and RR interval time series under conditions of relaxation and exercise, along with anthropometric data, contributed to the complexity of the post-exercise recovery of cardiopulmonary parameters after submaximal HR exercise in healthy recreative males. Full article

Cardiovascular diseases (CVDs) are highly prevalent, sudden onset, and relatively fatal, posing a significant public health burden. Long-term dynamic electrocardiography, which can continuously record the long-term dynamic ECG activities of individuals in their daily lives, has high research value. However, ECG signals are weak and highly susceptible to external interference, which may lead to false alarms and misdiagnosis, affecting the diagnostic efficiency and the utilization rate of healthcare resources, so research on the quality of dynamic ECG signals is extremely necessary. Aimed at the above problems, this paper proposes a dynamic ECG signal quality assessment method based on CNN and LSTM that divides the signal into three quality categories: the signal of the Q1 category has a lower noise level, which can be used for reliable diagnosis of arrhythmia, etc.; the signal of the Q2 category has a higher noise level, but it still contains information that can be used for heart rate calculation, HRV analysis, etc.; and the signal of the Q3 category has a higher noise level that can interfere with the diagnosis of cardiovascular disease and should be discarded or labeled. In this paper, we use the widely recognized MIT-BIH database, based on which the model is applied to realistically collect exercise experimental data to assess the performance of the model in dealing with real-world situations. The model achieves an accuracy of 98.65% on the test set, a macro-averaged F1 score of 98.5%, and a high F1 score of 99.71% for the prediction of Q3 category signals, which shows that the model has good accuracy and generalization performance. Full article

Beat-to-beat (B2B) variability in biomedical signals has been shown to have high diagnostic power in the treatment of various cardiovascular and autonomic disorders. In recent years, new techniques and devices have been developed to enable non-invasive blood pressure (BP) measurements. In this work, we aim to establish the concept of two-dimensional signal warping, an approved method from ECG signal processing, for non-invasive continuous BP signals. To this end, we introduce a novel BP-specific beat annotation algorithm and a B2B-BP fluctuation (B2B-BPF) metric novel for BP measurements that considers the entire BP waveform. In addition to careful validation with synthetic data, we applied the generated analysis pipeline to non-invasive continuous BP signals of 44 healthy pregnant women (30.9 ± 5.7 years) between the 21st and 30th week of gestation (WOG). In line with established variability metrics, a significant increase (p < 0.05) in B2B-BPF can be observed with advancing WOGs. Our processing pipeline enables robust extraction of B2B-BPF, demonstrates the influence of various factors such as increasing WOG or exercise on blood pressure during pregnancy, and indicates the potential of novel non-invasive biosignal sensing techniques in diagnostics. The results represent B2B-BP changes in healthy pregnant women and allow for future comparison with those signals acquired from women with hypertensive disorders. Full article

Neuro mechanical time delay is inevitable in the sensorimotor control of the body due to sensory, transmission, signal processing and muscle activation delays. In essence, time delay reduces stabilization efficiency, leading to system instability (e.g., falls). For this reason, estimation of time delay in patients such as people living with spinal cord injury (SCI) can help therapists and biomechanics to design more appropriate exercise or assistive technologies in the rehabilitation procedure. In this study, we aim to estimate the muscle onset activation in SCI people by four strategies on EMG data. Seven complete SCI individuals participated in this study, and they maintained their stability during seated balance after a mechanical perturbation exerting at the level of the third thoracic vertebra between the scapulas. EMG activity of eight upper limb muscles were recorded during the stability. Two strategies based on the simple filtering (first strategy) approach and TKEO technique (second strategy) in the time domain and two other approaches of cepstral analysis (third strategy) and power spectrum (fourth strategy) in the time–frequency domain were performed in order to estimate the muscle onset. The results demonstrated that the TKEO technique could efficiently remove the electrocardiogram (ECG) and motion artifacts compared with the simple classical filtering approach. However, the first and second strategies failed to find muscle onset in several trials, which shows the weakness of these two strategies. The time–frequency techniques (cepstral analysis and power spectrum) estimated longer activation onset compared with the other two strategies in the time domain, which we associate with lower-frequency movement in the maintaining of sitting stability. In addition, no correlation was found for the muscle activation sequence nor for the estimated delay value, which is most likely caused by motion redundancy and different stabilization strategies in each participant. The estimated time delay can be used in developing a sensory motor control model of the body. It not only can help therapists and biomechanics to understand the underlying mechanisms of body, but also can be useful in developing assistive technologies based on their stability mechanism. Full article

Measuring and adjusting the training load is essential in resistance training, as training overload can increase the risk of injuries. At the same time, too little load does not deliver the desired training effects. Usually, external load is quantified using objective measurements, such as lifted weight distributed across sets and repetitions per exercise. Internal training load is usually assessed using questionnaires or ratings of perceived exertion (RPE). A standard RPE scale is the Borg scale, which ranges from 6 (no exertion) to 20 (the highest exertion ever experienced). Researchers have investigated predicting RPE for different sports using sensor modalities and machine learning methods, such as Support Vector Regression or Random Forests. This paper presents PERSIST, a novel dataset for predicting PERceived exertion during reSIStance Training. We recorded multiple sensor modalities simultaneously, including inertial measurement units (IMU), electrocardiography (ECG), and motion capture (MoCap). The MoCap data has been synchronized to the IMU and ECG data. We also provide heart rate variability (HRV) parameters obtained from the ECG signal. Our dataset contains data from twelve young and healthy male participants with at least one year of resistance training experience. Subjects performed twelve sets of squats on a Flywheel platform with twelve repetitions per set. After each set, subjects reported their current RPE. We chose the squat exercise as it involves the largest muscle group. This paper demonstrates how to access the dataset. We further present an exploratory data analysis and show how researchers can use IMU and ECG data to predict perceived exertion. Full article

Background: Predicting beat-to-beat blood pressure has several clinical applications. While most machine learning models focus on accuracy, it is necessary to build models that explain the relationships of hemodynamical parameters with blood pressure without sacrificing accuracy, especially during exercise. Objective: The aim of this study is to use the RuleFit model to measure the importance, interactions, and relationships among several parameters extracted from photoplethysmography (PPG) and electrocardiography (ECG) signals during a dynamic weight-bearing test (WBT) and to assess the accuracy and interpretability of the model results. Methods: RuleFit was applied to hemodynamical ECG and PPG parameters during rest and WBT in six healthy young subjects. The WBT involves holding a 500 g weight in the left hand for 2 min. Blood pressure is taken in the opposite arm before and during exercise thereof. Results: The root mean square error of the model residuals was 4.72 and 2.68 mmHg for systolic blood pressure and diastolic blood pressure, respectively, during rest and 4.59 and 4.01 mmHg, respectively, during the WBT. Furthermore, the blood pressure measurements appeared to be nonlinear, and interaction effects were observed. Moreover, blood pressure predictions based on PPG parameters showed a strong correlation with individual characteristics and responses to exercise. Conclusion: The RuleFit model is an excellent tool to study interactions among variables for predicting blood pressure. Compared to other models, the RuleFit model showed superior performance. RuleFit can be used for predicting and interpreting relationships among predictors extracted from PPG and ECG signals. Full article