Search Results (237)

Textile-based wearable devices are rapidly gaining traction in the Internet of Things paradigm and offer distinct advantages for data collection and analysis across a wide variety of applications. Seamlessly integrating electronics in textiles remains a technical challenge, especially when the textiles’ essential properties, such as comfort, breathability, and flexibility, are meant to be preserved. This article investigates screen printing as a textile post-processing technique for electronic integration, and highlights its versatility, cost-effectiveness, and adaptability in terms of design and customization. The study examines two silver-based inks screen-printed on an Oxford polyester textile substrate with a focus on substrate preparation and treatment. Before printing, the textile samples were cleaned with nitrogen gas and then subjected to low-pressure oxygen plasma treatment. For comparative analysis, two samples printed on polyethylene terephthalate (PET) serve as a reference. The findings highlight the importance of plasma treatment in optimizing the printability of textiles and demonstrate that it notably improves the electrical properties of conductive inks. Despite some remaining challenges, the study indicates that screen-printed electronics show promising potential for advancing the development of e-textiles and sensor-integrated wearables. Full article

A crucial factor when developing e-textiles is ensuring their robustness and functionality during everyday activities, particularly washing. The ability to launder e-textile garments is not merely a matter of convenience but a necessity for widespread adoption. Incorporating electronics into textiles can lead to damage due to mechanical and chemical stresses, which most electronics are not designed to withstand. This work focuses on electronic yarn technology (e-yarn), in which electronic functionality is added to textiles by embedding small electronic components into a flexible yarn-like structure. First, the component is soldered onto thin conductive wires. The soldered component is then enclosed in a protective polymer resin (micro-pod). Micro-pods have different diameters depending on the size of the embedded electronic component. The ensemble is finally covered in a textile sheath. This study focuses on the wash durability of e-yarns integrated with textiles in three different ways: embroidered onto the surface of a woven fabric, within a knitted channel in a knitted fabric, and woven as a weft yarn. Further, the work studied the impact of using different sizes of micro-pods on the e-yarns’ wash durability. Ultimately, good wash durability was observed under all testing conditions. Full article

The results of this study, which involved treating cotton fabrics with three fluorescent hyperbranched polymers modified with 1,8-naphthalamide (P1), acridine (P2), and dansyl (P3) groups, could have applications in the development of antimicrobial textiles with self-disinfecting ability. The polymers, dissolved in DMF/water solution, were deposited on the cotton fabric using the exhaustion method. The fabrics were thoroughly analyzed by reflection spectra, CIEL*a*b* coordinates, and color difference (∆E). The release of the polymers from the cotton surface was studied in a phosphate buffer with pH = 7.4 and an acetate buffer with pH = 4.5 at 37 °C for 10 h. It is shown that at pH = 7.4, the release of the three polymers occurs slowly (about 4–5%). In contrast, in an acidic medium, due to protonation of the tertiary amino group of 1,8-naphthalimide, P1 passes significantly more readily into the aqueous solution (35%). The possibility of singlet oxygen (¹O₂) generation by the polymers and the cotton fabrics treated with them under sunlight irradiation was followed using an iodometric method. The microbiological activity was investigated against Gram-positive Bacillus cereus and Gram-negative Pseudomonas aeruginosa as model bacterial strains in the dark and after irradiation with sunlight. The antimicrobial activity of the polymers increased after light irradiation, as ¹O₂ attacks and destroys the bacterial cell membrane. Scanning electron microscopy showed that a stable bacterial biofilm had formed on the untreated cotton surface, but treatment with hyperbranched polymers prevented its formation. However, many bacteria were still observed on the fiber surface when the microbial test was performed in the dark, whereas only a few single bacteria were noticed after the illumination. A virucidal effect against respiratory viruses HRSV-2 and AAdV-5 was observed only after irradiation with sunlight. Full article

The interest in flexible and wearable electronics is increasing in both scientific research and in multiple industry sectors, such as medicine and healthcare, sports, and fashion. Thus, compatible power sources are needed to develop secondary batteries, fuel cells, supercapacitors, sensors, and dye-sensitized solar cells. Traditional liquid electrolytes pose challenges in the development of textile-based electronics due to their potential for leakage, flammability, and limited flexibility. On the other hand, gel electrolytes offer solutions to these issues, making them suitable choices for these applications. There are several advantages to using gel electrolytes in textile-based electronics, namely higher safety, leak resistance, mechanical flexibility, improved interface compatibility, higher energy density, customizable properties, scalability, and easy integration into manufacturing processes. However, it is also essential to consider some challenges associated with these gels, such as lower conductivity and long-term stability. This review highlights the application of gel electrolytes to textile materials in various forms (e.g., fibers, yarns, woven, knit, and non-woven), along with the strategies for their integration and their resulting properties. While challenges remain in optimizing key parameters, the integration of gel electrolytes into textiles holds immense potential to enhance conductivity, flexibility, and energy storage, paving the way for advanced electronic textiles. Full article

This research explores the development of highly durable flexible electronic textiles (e-textiles) for wearable electronics, focusing on improving their washability and performance. A conductive graphene-based ink was screen-printed onto a polyester textile. Water-based polyurethane (PU) coatings with variable crosslinker ratios and thickener were applied to solve washability issues. The results show that the PU coatings significantly enhanced the electrical stability and durability of the printed pathways after multiple washing cycles. The conductivity remained intact after 120 washing cycles, indicating that the final properties of the e-textile, which contained 6 wt% thickener and 3 wt% crosslinker, provided effective water protection. The results highlight the promise of these coated e-textiles for wearable electronics applications, especially in the occupational and healthcare sectors, where long-term flexibility and washability are critical. Full article

As a renewable and degradable biomass material, cellulose diacetate (CDA) has significant development potential and has gained widespread interest from researchers. However, its poor thermal stability at high temperatures limits its practical use in the extrusion process and restricts its applications in other fields, such as high-heat airflow filters, battery separators and special textile materials. To enhance the thermal stability of CDA, three heat-resistance additives, i.e., polyphenylene sulfide (PPS), polycarbonate (PC) and polyimide (PI), were introduced to synthesize PPS/CDA, PC/CDA and PI/CDA composite materials through melt extrusion. The incorporation of three heat-resistant additives increased the glass transition temperature (T_g), initial melting temperature (T_mⁱ) and final melting temperature (T_m^f) of the composites, and it reduced the heat loss at 195 °C. After conducting the isothermal thermogravimetry test for 3 h at 215 °C in an air atmosphere, the weight loss of PPS/CDA, PC/CDA and PI/CDA composites was 4.6%, 4.1% and 3.7%, respectively, which was 5.1% lower than that of pure CDA. Morphology characterization tests using a 3D digital microscope and a field emission scanning electron microscope (FESEM) revealed the compatibility order with CDA as the following: PC > PPS > PI. Additionally, Fourier transform infrared spectroscopy (FT–IR) disclosed that hydrogen bonds were formed between heat-resistant additives and CDA molecules, and the carbonyl groups in CDA showed conjugation and hyperconjugation effects with the benzene rings in the additives. Therefore, the enhanced thermal stability of CDA composites can be attributed to the molecular entanglement and crosslinking between additives and CDA molecules. Full article

The polyol method under a single pot has successfully produced a coating of CuO, TiO₂, and the combination of CuO/TiO₂ around Ag NWs under sequential addition. The Ag NWs and their coating with a pure metal oxide and a hybrid of metal oxide were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), UV–Visible, photoluminescent (PL) spectroscopy, and cyclic voltammetry (CV). The formation of ultra-thin NWs was also been seen in the presence of the TiO₂ coating. The ultra-thin and co-axial coating of each metal oxide and their hybrid form preserved the SPR of the Ag NWs and demonstrated photon harvesting from the 400–800 nm range. The band gap hybridization was confirmed by CV for the Ag@CuO/TiO₂ design, which made the structure a reliable catalyst. Therefore, the material expresses excellent photocatalytic activities for carcinogenic textile dyes such as turquoise blue (TB), sapphire blue (SB), and methyl orange (MO), with and without the reagent H₂O₂. The hybrid form (i.e., Ag@CuO/TiO₂) exhibited degradation within 6 min in the presence of H₂O₂. Additionally, the material showed antibacterial activities against various bacteria (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Bacillus pumilus) when assayed using broth media. Therefore, the materials have established degrading and disinfection roles suitable for environmental perspectives. The role of coating with each metal oxide and their hybrid texture further improved the growth of Ag NWs. The preparatory route possibly ensued metal–metal oxide and metal–hybrid metal oxide Schottky junctions, which would expectedly transform it into a diode material for electronic applications. Full article

The rapid developments in conductive polymers with flexible electronics over the past years have generated noteworthy attention among researchers and entrepreneurs. Conductive polymers have the distinctive capacity to conduct electricity while still maintaining the lightweight, flexible, and versatile characteristics of polymers. They are crucial for the creation of flexible electronics or gadgets that can stretch, bend, and adapt to different surfaces have sparked momentous interest in electronics, energy storage, sensors, smart textiles, and biomedical applications. This review article offers a comprehensive overview of recent advancements in conductive polymers over the last 15 years, including a bibliometric analysis. The properties of conductive polymers are summarized. Additionally, the fabrication processes of conductive polymer-based materials are discussed, including vacuum filtering, hydrothermal synthesis, spray coating, electrospinning, in situ polymerization, and electrochemical polymerization. The techniques have been presented along with their advantages and limitations. The multifunctional applications of conductive polymers are also discussed, including their roles in energy storage and conversion (e.g., supercapacitors, lithium-ion batteries (LIBs), and sodium-ion batteries (SIBs)), as well as in organic light-emitting diodes (OLEDs), organic solar cells (OSCs), conductive textiles, healthcare monitoring, and sensors. Future scope and associated challenges have also been mentioned for further development in this field. Full article

As an innovative branch of electronics, intelligent electronic textiles (e-textiles) have broad prospects in applications such as e-skin, human–computer interaction, and smart homes. However, it is still a challenge to distinguish multiple stimuli in the same e-textile. Herein, we propose a dual-parameter smart e-textile that can detect human pulse and body temperature in real time, with high performance and no signal interference. The doping of SWCNTs in PEDOT:PSS improves the electrical conductivity and Seebeck coefficient of the prepared composites, which results in excellent pressure and temperature-sensing properties of the PEDOT:PSS/SWCNTs/CS@PET-textile (PSCP) sensor. The dual-mode sensor has high sensitivity (32.4 kPa⁻¹), fast response time (~21 ms), and excellent durability (>2000 times) in pressure detection. Concurrently, this sensor maintains a high Seebeck coefficient of 25 μV/K in the 0–120 K temperature range with a tremendous linear relationship. Based on impressive dual-mode sensing characteristics and independent temperature-difference- and pressure-sensing mechanisms, smart e-textile sensors realize the real-time simultaneous monitoring of weak pulse signals and human body temperature, showing great potential in medical healthcare. In addition, the potential energy is excited by the temperature gradient between the human skin and the environment, which provides a novel idea for wearable self-powered devices. Full article

The sol-gel process was used to create titanium dioxide (TiO₂) nanoparticles, a nanocrystalline semiconductor. How several synthesis factors, such as titanium precursor concentration, annealing temperature, and peptization temperature, affected the structural and morphological properties of TiO₂ nanoparticles were thoroughly explored. X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), measurements of the specific surface area and pore size using the BET method, and UV-visible diffuse reflectance spectroscopy were all used in this investigation. The specific surface area determined by BET analysis decreased with increasing calcination temperature. The XRD analysis showed that a composite sample consisting mainly of anatase with minor brookite phases was obtained when the titanium precursor concentration ranged between 0.2 and 0.4 M, whereas a concentration of 0.5 M resulted in the formation of pure anatase. The photocatalytic activity of the synthesized TiO₂ powders under different operational parameters was evaluated for the common commercial textile dye, i.e., methylene blue (MB). It was experimented that the model pollutant decoloration follows the Langmuir–Hinshelwood (L-H) model. In view of this detailed research work, it was observed that the TiO₂ produced with a titanium precursor concentration of 0.3 M, a pH value of 5 during the peptization step, and an annealing temperature of 600 °C were found to be the best conditions for this catalytic degradation process. When used in conjunction with a TiO₂ concentration of 0.04 g/L and a reactor suspension pH value of 6.0, the TiO₂ catalyst produced a stunning 98% degradation of methylene blue under these circumstances. Full article

The integration of electronics into textiles has gained considerable attention in recent years, due to the development and high demand of wearable and flexible electronics. One of the promising fields is healthcare, which often involves the utilization of textile-based electrodes. These electrodes often offer advantages such as conformability, breathability, and comfort. This article presents the development of 3D-formed textile-based electrodes together with a narrow fabric-based interconnect system. This study showcases the methods and materials for the fabrication of the textile-based electrodes and the interconnect system, including a durability assessment, by performing standardized washing (ISO 6330-2012) and user tests. The results demonstrated that the developed 3D-formed textile-based electrodes and stretchable interconnect system are durable and effective for wearable applications, maintaining performance under extensive washing. Full article

The production of consumer electronics using electrically conductive materials is a dynamically developing sector of the economy. E-textiles (electronic textiles) are also used in radio frequency identification technology, mainly in the production of tag antennas. For economic reasons, it is important that the finished product is universal, although frequencies in radio systems have different values in different regions of the world. Therefore, the antenna bandwidth must be sufficiently wide so that the read range of the tag is maximally large for all frequencies of the specified band. The bandwidth of an antenna depends on its type and geometric dimensions, but this parameter can also be influenced by the way a given type of antenna is made. The authors prepared samples of embroidered RFID tag antennas for the UHF band using various types of embroidery. Then, its impedance and the read range of the tag were examined in order to determine the exact influence of the type of embroidery on the parameter of interest (antenna bandwidth). The results obtained during the research indicate the influence of different embroidery styles is present; however, that influence is not significant. Full article

People with chronic illnesses rely on continuous monitoring systems to monitor their vital signs. Despite the advantages of these systems, patients experience discomfort from bulky wearable devices and the inconveniences associated with fully implantable continuous monitoring systems. A potential solution to these limitations is a wearable E-textile antenna. In this study, we conduct market research and introduce an antenna design made of conductive fabric on cotton substrate. Market research is performed to evaluate multiple conductive fabrics to select the best material for this application. The antenna design operates in the 2.4 GHz and 5.8 GHz ISM frequency band and is evaluated by simulation and in vitro testing with tissue-mimicking gels at various bend angles ranging between 0 and 45 degrees. Full article

In pursuit of overcoming Fenton oxidation limitations in wastewater treatment, an introduction of a heterogeneous photocatalyst was developed. In this regard, the current work introduces ZnO nanocrystals that were successfully prepared via a thermal decomposition technique and then capped with oleic acid (OA). The synthesized ZnO-OA and the pristine ZnO were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). Then, the study introduces the application of such materials in advanced oxidation processes, i.e., a Fenton reaction to treat dye-containing wastewater. Synthetic wastewater that was prepared using Reactive Blue 4 (RB4) was used as a simulated textile wastewater effluent. Fenton’s oxidation was applied, and the system parameters were assessed using the modified Fenton’s system. The synthesized samples of ZnO were characterized by a recognized wurtzite hexagonal structure. The surface modification of ZnO with oleic acid (OA) resulted in an increase in crystallite size, lattice parameters, and cell volume. These modifications were linked to the efficient capping of ZnO nanoparticles by OA, which further improved the dispersion of the nanoparticles, as demonstrated through SEM imaging. The optimum conditions of ZnO- and ZnO-OA-synthesized modified Fenton composites showed 400 mg/L and 40 mg/L for H₂O₂ and the catalyst, respectively, at pH 3.0, and within 90 min under UV irradiation the maximal dye oxidation reached 93%. The catalytic performance at its optimal circumstances was in accordance with a pseudo-second-order kinetics model for both ZnO-OA- and the pristine ZnO-based Fenton’s systems. The thermodynamic parameters, including the enthalpy (ΔH′), the entropy (ΔS′), and Gibbs free energy (ΔG′) of activations, were also checked, and their values settled that both ZnO and ZnO-OA Fenton systems are non-spontaneous in nature. Furthermore, the reaction signified for processing at a low energy barrier condition (10.38 and 31.38 kJ/mol for ZnO-OA- and the pristine ZnO-based Fenton reactions, respectively). Full article

This paper introduces a novel approach to fabricating textile microwave transmission lines through knitting techniques. These textile-based transmission lines, capable of transmitting high-frequency signals between wearable transceivers and antennas, offer significant potential for the development of advanced wearable electronics. By leveraging a single technological process, our proposed method enables the creation of flexible and wearable devices. To demonstrate the feasibility of this approach, we present the design and numerical modeling of a microstrip line operating within the gigahertz frequency range. A prototype structure was fabricated and experimentally characterized, revealing moderate attenuation of less than 5 dB for frequencies below 2.5 GHz. However, a major challenge in the field of wearable electronics is the real-time applicability of such devices. Our work aims to address this challenge by providing a flexible and scalable solution for integrating wireless communication capabilities into wearable systems. Future research will focus on further optimizing the design and fabrication processes to enhance performance and minimize signal loss, ultimately enabling the realization of practical and user-friendly wearable devices. Full article