Search Results (6)

Electromagnetic compatibility (EMC) diagnostics for high-density through-silicon via (TSV)-based chips face significant challenges due to complex three-dimensional electromagnetic coupling and inefficient source reconstruction workflows. This paper proposes a universal contribution-driven dipole preprocessing technique tailored for dipole array-based source reconstruction methods, addressing the critical efficiency-accuracy trade-off inherent in traditional approaches. The core innovation is an influence factor-based evaluation-elimination mechanism that extracts effective dipole components aligned with the structural characteristics of TSV-based chips and multilayer printed circuit boards, while eliminating redundant dipoles independently of the downstream source reconstruction algorithm. Validation on a multilayer PCB (1 GHz) and a TSV-based chip (4 GHz) demonstrates that the technique maintains high reconstruction accuracy, with error increase limited to ≤0.2% for the simulated PCB and ≤0.05% for the physically measured TSV-based chip. Computational time is reduced by 28–61% for the PCB and 20–28% for the TSV chip compared to traditional source reconstruction without preprocessing. For TSV-based chips exhibiting complex electromagnetic behavior, the technique delivers consistent performance across different dipole configurations, providing a fast, robust, and universal EMC diagnostic tool for high-density electronic devices. Full article

Drug-resistant epilepsy (DRE) is often treated with surgery or neuromodulation. Specifically, responsive neurostimulation (RNS) is a widely used therapy that is programmed to detect abnormal brain activity and intervene with tailored stimulation. Despite the success of RNS, some patients require further interventions. However, having an RNS device in situ is a hindrance to the performance of neuroimaging techniques. Magnetoencephalography (MEG), a non-invasive neurophysiologic and functional imaging technique, aids epilepsy assessment and surgery planning. MEG performed post-RNS is complicated by signal distortions. This study proposes an independent component analysis (ICA)-based approach to enhance MEG signal quality, facilitating improved assessment for epilepsy patients with implanted RNS devices. Three epilepsy patients, two with RNS implants and one without, underwent MEG scans. Preprocessing included temporal signal space separation (tSSS) and an automated ICA-based approach with MNE-Python. Power spectral density (PSD) and signal-to-noise ratio (SNR) were analyzed, and MEG dipole analysis was conducted using single equivalent current dipole (SECD) modeling. The ICA-based noise removal preprocessing method substantially improved the signal-to-noise ratio (SNR) for MEG data from epilepsy patients with implanted RNS devices. Qualitative assessment confirmed enhanced signal readability and improved MEG dipole analysis. ICA-based processing markedly enhanced MEG data quality in RNS patients, emphasizing its clinical relevance. Full article

The problem of precisely estimating the position and orientation of multiple dipoles using synthetic EEG signals is considered in this paper. After determining a proper forward model, a nonlinear constrained optimization problem with regularization is solved, and the results are compared with a widely used research code, namely EEGLAB. A thorough sensitivity analysis of the estimation algorithm to the parameters (such as the number of samples and sensors) in the assumed signal measurement model is conducted. To confirm the efficacy of the proposed source identification algorithm on any category of data sets, three different kinds of data-synthetic model data, visually evoked clinical EEG data, and seizure clinical EEG data are used. Furthermore, the algorithm is tested on both the spherical head model and the realistic head model based on the MNI coordinates. The numerical results and comparisons with the EEGLAB show very good agreement, with little pre-processing required for the acquired data. Full article

The polarimetric synthetic aperture radar (PolSAR) provides us with a two-by-two scattering matrix data set. The ensemble averaged coherency matrix in an imaging window derived using a scattering matrix has all non-zero elements in its three-by-three matrix. It is a full 3 × 3 matrix that bears nine real-valued and independent polarimetric parameters inside. In the proposed decomposition method, G5U, we preprocess observed coherency matrix [T] by using two consecutive unitary transformations to become an ideal form for five-component decomposition. The transformation reduces nine parameters to seven, which is the best fit for five-component scattering model expansion. We can retrieve five powers corresponding to surface scattering, double bounce scattering, volume scattering, oriented dipole scattering, and compound dipole scattering, directly. These powers can be calculated easily and used to display superb polarimetric RBG images as never before, and are further applicable for polarimetric calibration, classification, validation, etc. Full article

Height measurement of meter wave radar is a difficult and important problem. This paper studies the height measurement of meter wave polarimetric (MWP)-MIMO array radar under complex terrain. The traditional electrically short dipole has low radiation efficiency, and the collocated dipole vector antenna has strong mutual coupling. This paper proposes to use electrically long dipoles and separated vector antennae to solve the problems of low radiation efficiency and strong mutual coupling. In addition, different from the traditional flat terrain, the research of this paper is based on the conditions of complex undulating terrain. First, the height measurement signal model of the MWP-MIMO radar with separated electrically long dipole under the complex terrain is derived. Then, a preprocessing method of block orthogonal matching pursuit is proposed to obtain the coarse estimation of the target’s elevation. Then, under the guidance of the coarse estimation, the generalized MUSIC algorithm is used to obtain the high-precision elevation estimation of the target, and then the height measurement of the target is obtained according to the geometric relationship. Finally, the effectiveness of the proposed algorithm is proved by computer simulations. Full article

Motion artifacts hinder source-level analysis of mobile electroencephalography (EEG) data using independent component analysis (ICA). iCanClean is a novel cleaning algorithm that uses reference noise recordings to remove noisy EEG subspaces, but it has not been formally tested in a parameter sweep. The goal of this study was to test iCanClean’s ability to improve the ICA decomposition of EEG data corrupted by walking motion artifacts. Our primary objective was to determine optimal settings and performance in a parameter sweep (varying the window length and r² cleaning aggressiveness). High-density EEG was recorded with 120 + 120 (dual-layer) EEG electrodes in young adults, high-functioning older adults, and low-functioning older adults. EEG data were decomposed by ICA after basic preprocessing and iCanClean. Components well-localized as dipoles (residual variance < 15%) and with high brain probability (ICLabel > 50%) were marked as ‘good’. We determined iCanClean’s optimal window length and cleaning aggressiveness to be 4-s and r² = 0.65 for our data. At these settings, iCanClean improved the average number of good components from 8.4 to 13.2 (+57%). Good performance could be maintained with reduced sets of noise channels (12.7, 12.2, and 12.0 good components for 64, 32, and 16 noise channels, respectively). Overall, iCanClean shows promise as an effective method to clean mobile EEG data. Full article