Search Results (52)

Here, we propose an analytical approach to simulating MammoWave, a novel apparatus for breast cancer detection using microwave imaging. The approach is built upon the theory of cylindrical waves emitted by line sources. The sample is modelled as a cylinder with an inclusion. Our results indicate that when compared with phantom measurements, our approach gives an average relative error (between the image generated through measurement with phantoms and the image generated through the analytical simulation approach) of less than 6% when considering the full frequency band of 1–9 GHz. The procedure permits the simulation of the MammoWave imaging system loaded with multilayered eccentric cylinders; thus, it can be used to obtain an insight into MammoWave’s detection capability, without having to perform either time-consuming full-wave simulations or phantom measurements. Full article

Background: Peptide amphiphile micelles (PAMs) are a promising lipid-based nanotechnology currently in development for a variety of applications ranging from atherosclerosis to cancer therapy. Especially relevant for immune applications, PAMs improve trafficking through lymphatic vessels, enhance uptake by antigen-presenting cells, and inhibit the protease-mediated degradation of cargo. However, the creation of the peptide amphiphiles (PAs) necessary to induce micellization often requires modifying an immunotarget peptide with non-native moieties, which can induce the production of off-target antibodies. Methods: PAs containing different linkers between the antigen and non-native flanking regions were synthesized and physically characterized. BALB/c mice were then subcutaneously immunized on days 0 and 14 with these formulations and ELISAs were conducted on the sera collected from vaccinated mice on day 35 to evaluate antibody responses. Results: We determined that Palm₂K-M2_2–16-(KE)₄ PAMs elicited off-target antibody responses and sought to avoid these unintended responses by adding linkers in between the M2_2–16 antigen and the non-native flanking regions (i.e., Palm₂K- and -(KE)₄) of the PA. Most significantly, the addition of diproline linkers on either side of the M2_2–16 antigen conferred a loss of β-sheet structure, whereas changing the method of lipid attachment from Palm₂K- to Pam₂CS-induced the formation of primarily spherical micelles compared to a mixture of spherical and short cylindrical micelles. Despite these morphological changes, all linker-containing PAMs still induced the production of off-target antibodies. Excitingly, however, the formulation containing a Pam₂CS moiety (intended to mimic the adjuvanticity of the TLR2 agonist adjuvant Pam₂CSK₄) elicited high on-target antibody titers similar to those induced by PAMs co-delivered with Pam₂CSK₄. Conclusions: While the linkers tested did not completely eliminate the production of off-target antibodies elicited by the PAMs, the inclusion of a Pam₂CS moiety both increased the amount of on-target antibodies and improved the ratio of on-target to off-target antibodies in response to the M2_2–16 vaccine. Full article

This study proposes a novel approach to improving the crashworthiness of lithium-ion cylindrical cell packs by strategically placing spacers between the cells. The spacers transform the initial line contacts into broader surface contacts, enhancing the overall stiffness of the pack and reducing radial deformation during compression. The concept was evaluated using finite element analysis (FEA), leveraging established material models to efficiently assess the concept’s potential prior to physical testing. To validate the robustness of the homogenized cell material and its application in a full pack, a compression experiment was performed on a pack of nine cells. The experimental results aligned closely with the simulation data, underlining the reliability of the material model and simulation methodology. Across all configurations and load cases—quasi-static compression using a plate or cylinder, and dynamic impact tests simulating crash indentation with a ball—the inclusion of spacers resulted in significant reductions in cell deformation and pack intrusion. The study also examined three spacer materials: aluminum, printed PLA, and printed PLA conditioned at 60 °C. The results showed that stiffer spacers, such as those made of aluminum, were the most effective in improving crash performance. However, even the conditioned PLA spacer, despite its lower stiffness, delivered meaningful benefits by enhancing structural integrity and reducing deformation. This demonstrates the versatility of the spacer concept, which can accommodate a range of materials based on specific performance and manufacturing requirements. These findings establish a solid foundation for the practical implementation of spacers in electric vehicle battery packs. Future research should include experimental validation under real-world crash conditions and explore spacer design and material optimization to maximize crashworthiness without compromising energy density or thermal performance. Full article

This study employs a microstructure-based finite element modeling approach to understand the mechanical behavior of asphalt mixtures across different length scales. Specifically, this work aims to develop a multi-scale modeling approach employing representative volume elements (RVEs) of optimal size; this is a key issue in asphalt modeling for high-fidelity fracture modeling of heterogeneous asphalt mixtures. To determine the optimal RVE size, a convergence analysis of homogenized elastic properties is conducted using two types of RVEs, one made with polydisperse spherical inclusions, and another made with polydisperse truncated cylindrical inclusions, each aligned with the American Association of State Highway and Transportation Official’s maximum density gradation curve for a 12.5 mm Nominal Maximum Aggregate Size (NMAS). The minimum RVE lengths for this NMAS were found to be in the range of 32–34 mm. After the optimal RVE size for each inclusion shape is obtained, computational models of heterogeneous Indirect Tensile Asphalt Cracking Test samples are then generated. These models include the components of viscoelastic mastic, linear elastic aggregates, and cohesive zone modeling to simulate the rate-dependent failure evolution from micro- to macro-cracking. Examination of load-displacement responses at multiple loading rates shows that both heterogeneous models replicate experimentally measured data satisfactorily. Through micro- and macro-level analyses, this study enhances our understanding of the composition-performance relationships in asphalt pavement materials. The procedure proposed in this study allows us to identify the optimal RVE sizes that preserve computational efficiency without significantly compromising their ability to capture the asphalt material behavior under specific operational conditions. Full article

Sweetpotato (Ipomoea batatas L.) is an essential food crop globally, especially for farmers facing resource limitations. Like other crops, sweetpotato cultivation faces significant production challenges due to viral infections. This study aimed to identify and characterize viruses affecting sweetpotato crops in Uganda, mostly those associated with sweetpotato virus disease (SPVD). Infected leaf samples were collected from farmers’ fields in multiple districts spanning three regions in Uganda. MiSeq, a next-generation sequencing platform, was used to generate reads from the viral nucleic acid. The results revealed nine viruses infecting sweetpotato crops in Uganda, with most plants infected by multiple viral species. Sweet potato pakakuy and sweet potato symptomless virus_1 are reported in Uganda for the first time. Phylogenetic analyses demonstrated that some viruses have evolved to form new phylogroups, likely due to high mutations and recombination, particularly in the coat protein, P1 protein, cylindrical inclusion, and helper component proteinase regions of the potyvirus. The sweet potato virus C carried more codons under positive diversifying selection than the closely related sweet potato feathery mottle virus, particularly in the P1 gene. This study provides valuable insights into the viral species infecting sweetpotato crops, infection severity, and the evolution of sweet potato viruses in Uganda. Full article

Structural health monitoring applications have gained significant attention in recent research, particularly in the study of the mechanical–electrical properties of materials such as cement-based composites. While most researchers have focused on the piezoresistive properties of cement-based composites under compressive stress, exploring the electrical impedance of such materials can provide valuable insights into the relationship between their mechanical and electrical characteristics. In this study, we investigated the connection between the mechanical properties and electrical impedance of cement-based composites modified with Au nanoparticles. Cylindrical samples with dimensions of 3 cm in diameter and 6 cm in length were prepared with a ratio of w/c = 0.47. The Au nanoparticles (Au NPs) were synthesized using pulsed laser ablation in liquids, and their size distribution was analyzed through dynamical light scattering. Mechanical properties were evaluated by analyzing the Young modulus derived from strain–stress curves obtained at various force rates. Electrical properties were measured by means of electrical impedance spectroscopy. The experimental results revealed a notable reduction of 91% in the mechanical properties of Au NPs-cement compounds, while their electrical properties demonstrated a significant improvement of 65%. Interestingly, the decrease in mechanical properties resulting from the inclusion of gold nanoparticles in cementitious materials was found to be comparable to that resulting from variations in the water/cement ratios or the hydration reaction. Full article

Plant viruses cause severe losses in agricultural production. Parasite-derived resistance (PDR) offers a promising avenue for developing disease-resistant varieties independent of resistance genes. However, for potyviruses with great agricultural importance, such as soybean mosaic virus (SMV), systematic research on viral genes that can be used for PDR has not been conducted. In this study, we transiently expressed the untranslated region (UTR) or each protein-coding cistron of SMV in Nicotiana benthamiana to evaluate their potential role in conferring PDR. A viral suppressor of RNA silencing (VSR) was also applied to investigate the possible mechanisms of the PDR. The results showed that the transient overexpression of UTR and each cistron of SMV could inhibit SMV infection. The expression of VSR in N. benthamiana leaves could compromise UTR and most of the SMV cistron-mediated inhibition of SMV infection, indicating the involvement of RNA silencing in PDR. In comparison, the expression of VSR could not compromise the PDR conferred by coat protein (CP), P3N-PIPO, cylindrical inclusion (CI), and NIa-Pro, suggesting that these viral cistrons may play roles in PDR at the protein level. These results reveal diverse mechanisms in PDR conferred by different viral cistrons and provide potential gene candidates that can be used for transgenic approaches against SMV. Full article

The emerging concept of hybrid nanofluids has grabbed the attention of researchers and scientists due to improved thermal performance because of their remarkable thermal conductivities. These fluids have enormous applications in engineering and industrial sectors. Therefore, the present research study examines thermal and mass transportation in hybrid nanofluid past an inclined linearly stretching sheet using the Maxwell fluid model. In the current problem, the hybrid nanofluid is engineered by suspending a mixture of aluminum oxide $A{l}_2{O}_3$ and copper $Cu$ nanoparticles in ethylene glycol. The fluid flow is generated due to the linear stretching of the sheet and the sheet is kept inclined at the angle $\zeta =\pi /6$ embedded in porous medium. The current proposed model also includes the Lorentz force, solar radiation, heat generation, linear chemical reactions, and permeability of the plate effects. Here, in the current simulation, the cylindrical shape of the nanoparticles is considered, as this shape has proven to be excellent for the thermal performance of the nanomaterials. The governing equations transformed into ordinary differential equations are solved using MATLAB bvp4c solver. The velocity field declines with increasing magnetic field parameter, Maxwell fluid parameter, volume fractions of nanoparticles, and porosity parameter but increases with growing suction parameter. The temperature drops with increasing magnetic field force and suction parameter values but increases with increasing radiation parameter and volume fraction values. The concentration profile increases with increasing magnetic field parameters, porosity parameters, and volume fractions but reduces with increasing chemical reaction parameters and suction parameters. It has been noted that the purpose of the inclusion of thermal radiation is to augment the temperature that is serving the purpose in the current work. The addition of Lorentz force slows down the speed of the fluid and raises the boundary layer thickness, which is visible in the current study. It has been concluded that, when heat generation parameters increase, the temperature field increases correspondingly for both nanofluids and hybrid nanofluids. The increase in the volume fraction of the nanoparticles is used to enhance the thermal performance of the hybrid nanofluid, which is evident in the current results. The current results are validated by comparing them with published ones. Full article

A Surface-Riding Wave Energy Converter (SR-WEC) featuring a sliding magnet inside a pitching cylindrical hull is investigated as an easily deployable small power device to support small-scale marine operations. This study extends the earlier development of the system by authors to enhance power performance through the application of end spring and latching control. The inclusion of springs at the tube’s end enhances the magnet release and travel speeds as well as the average power output compared to systems without them. Further improvement of power output can also be achieved by employing optimal latching control. We introduced constant-angle and variable-angle unlatching strategies to determine optimal parameters in combination with passive and reactive power take-off (PTO) controls to assess their effectiveness. The optimized latching control and end spring can increase 60–80% more power output compared with the case without them under certain PTO damping. Additionally, we discussed the effects of limiting peak powers and associated energy leaks with latching. Full article

In this paper, we report for the first time on the theoretical and experimental investigation of Fe_77.5Si_7.5B₁₅ amorphous glass-coated nanowires by analyzing samples with the same diameters in both cases. The hysteresis curves, the dependence of the switching field values on nanowire dimensions, and the effect of the magnetoelastic anisotropy on the magnetization processes were analyzed and interpreted to explain the magnetization reversal in highly magnetostrictive amorphous nanowires prepared in cylindrical shape by rapid quenching from the melt. All the measured samples were found to be magnetically bistable, being characterized by rectangular hysteresis loops. The most important feature of the study is the inclusion of the magnetoelastic anisotropy term that originates in the specific production process of these amorphous nanowires. The results show that the switching field decreases when the nanowire diameter increases and this effect is due to the reduction in anisotropy and in the intrinsic mechanical stresses. Moreover, the obtained results reveal the importance of factors such as geometry and magnetoelastic anisotropy for the experimental design of cylindrical amorphous nanowires for multiple applications in miniaturized devices, like micro and nanosensors. Full article

Ladle metallurgy serves as a crucial component of the steelmaking industry, where it plays a pivotal role in manipulating the molten steel to exercise precise control over its composition and properties. Turbulence in ladle metallurgy influences various important aspects of the steelmaking process, including mixing and distribution of additives, alongside the transport and removal of inclusions within the ladle. Consequently, gaining a clear understanding of the stirred flow field holds the potential of optimizing ladle design, improving control strategies, and enhancing the overall efficiency and steel quality. In this project, an advanced Particle-Tracking-Velocimetry system known as “Shake-the-Box” is implemented on a cylindrical water ladle model while compressed air injections through two circular plugs positioned at the bottom of the model are employed to actively stir the flow. To mitigate the particle images distortion caused by the cylindrical plexi-glass walls, the method of refractive matching is utilized with an outer polygon tank filled with a sodium iodide solution. The volumetric flow measurement is achieved on a 6 × 6 × 2 cm domain between the two plugs inside the cylindrical container while the flow rate of gas injection is set from 0.1 to 0.4 L per minute. The volumetric flow field result suggests double gas injection at low flow rate (0.1 L per minute) produce the least disturbed flow while highly disturbed and turbulent flow can be created at higher flow rate of gas injection. Full article

We reported a molecular dynamics (MD) simulation study of an advancing pure Al(100)/melt interface that encounters a foreign immiscible liquid Pb cylindrical nano-inclusion. When the advancing interface approaches the inclusion, the interface may engulf, push to an extent and then engulf or push the nano-inclusion away from the solidifying phase depending on the velocity of the interface. Here, we investigated cylindrical liquid Pb nano-inclusion pushing or engulfment by a growing crystal Al that strongly depends on the velocity of the crystal/melt interface, and a critical velocity ($v_c$) is deduced. If the velocity of the interface is less than $v_c$, then the inclusion is pushed and engulfed otherwise. The relationship between $v_c$ and the radius of the nano-inclusion is expressed using a power function that agrees well with the previous studies. For velocity above the $v_c$, the crystal/melt interface plays a vital role; it hinders the matrix atoms from setting below the cylindrical nano-inclusion due to insufficient mass transfer below the inclusion, resulting in the engulfment. Full article

Biocomposite development, as a sustainable alternative to fossil-derived materials with diverse industrial applications, requires expediting the design process and reducing production costs. Simulation methods offer a solution to these challenges. The main aspects to consider in simulating composite materials successfully include accurately representing microstructure geometry, carefully selecting mesh elements, establishing appropriate boundary conditions representing system forces, utilizing an efficient numerical method to accelerate simulations, and incorporating statistical tools like experimental designs and re-regression models. This study proposes a comprehensive methodology encompassing these aspects. We present the simulation using a numerical homogenization technique based on FEM to analyze the mechanical behavior of a composite material of a polyhydroxybutyrate (PHB) biodegradable matrix reinforced with cylindrical inclusions of flax and kenab. Here, the representative volume element (RVE) considered the geometry, and the numerical homogenization method (NHM) calculated the macro-mechanical behavior of composites. The results were validated using the asymptotic homogenization method (AHM) and experimental data, with error estimations of 0.0019% and 7%, respectively. This model is valuable for predicting longitudinal and transverse elastic moduli, shear modulus, and Poisson’s coefficient, emphasizing its significance in composite materials research. Full article

By experimental methods, 26 specimens were designed to conduct elastic and elastic–plastic buckling tests on cylindrical shells containing cracks. This study discusses the influence of factors such as the length–diameter ratio, the diameter–thickness ratio, the crack length, the inclination of the crack, etc., on the buckling load. Additionally, finite element models were established to compare with experimental results. For the PMMA cylindrical shell, the results showed that as the length–diameter ratio of the cylindrical shell increased, the buckling load first decreased and then increased. For the 6063 aluminum alloy cylindrical shell, with increasing length–diameter ratio, diameter–thickness ratio, and crack length of the cylindrical shell, the buckling load decreased accordingly. However, concerning the crack inclination, as the crack inclination increased, the buckling load increased accordingly. This indicates that the larger the crack inclination, the higher the load capacity of the cylindrical shell containing cracks. Through finite element simulations of cylindrical shells with cracks, it was found that through compressive mechanical properties, both elastic and elastic–plastic buckling loads yielded results that are closer to the experimental results. Additionally, the inclusion of contact effects in numerical simulations further improved the agreement with the experimental results, and the variation trend of the buckling load in the finite element simulation was consistent with the experimental results. The research findings provide valuable references for the assessment of load capacity in structures containing cracks. Full article

The works available in the literature presenting the influence of impurities on the properties (mainly fatigue strength) of material give an answer with a high degree of probability for hard steels and large precipitations (usually above 10 µm). The impact of non-metallic impurities on the durability of high-ductility steels causes much greater problems and is much more difficult to explain. The results of the existing studies rarely take into account the diameter of the impurities in relation to the distance between the impurities. This paper presents the results of tests carried out on a low-carbon steel heated in a 100-tonne oxygen converter and deoxidized under vacuum. The fatigue strength test was carried out on cylindrical samples using rotational bending for different tempering temperatures of the steel. The quotient of the average size of the inclusions and the average distance between the inclusions were analyzed. Based on the obtained results, it was found that steel annealed in the converter and vacuum degassed has a content of both phosphorus and sulfur below 0.02% and a total volume of impurities of 0.086%. The main fraction of impurities are oxide inclusions with a diameter below 2 µm. An increase in fatigue strength was found along with an increase in the number of impurities, mainly of small diameters. Full article