Search Results (17)

The production of bionanocomposite films based on carboxymethyl derivatives of starch and cellulose with sodium montmorillonite (MMT-Na) as a filler was described. The developed films with high absorbency can be used in the preparation of adhesive dressings for wounds oozing as a result of abrasions or tattoos. Carboxymethyl cellulose (CMC), carboxymethyl starch (CMS), and potato starch were used as the raw materials for film manufacturing. Citric acid was used as a crosslinking agent and glycerol as a plasticizer. The following parameters were evaluated for the obtained films: solubility in water, swelling behavior, moisture absorption, and mechanical durability (tensile strength, elongation at break, and Young’s modulus). This study revealed that filler concentration has a significant influence on the stability, durability, and moisture absorption parameters of films. The best nanocomposite with a high absorption capacity was a two-component film CMS/CMC containing 5 pph of sodium montmorillonite and can be used as a base material for wound dressing, among other applications. Full article

The textile industry is under increasing pressure to adopt sustainable practices due to the significant environmental impacts associated with fiber production, including high energy consumption, water usage, and substantial greenhouse gas emissions. The recycling of textile waste, particularly cotton, is a promising solution that has the potential to reduce landfill waste and decrease the demand for virgin fibers. However, mechanically recycled cotton fibers frequently demonstrate diminished mechanical properties compared to virgin fibers, which limits their potential for high-quality textile applications. This study explores the use of cross-linking agents (citric acid (CA) and sodium hypophosphite (SHP)), polymers (polyethylene glycol (PEG), chitosan (CH), carboxymethyl cellulose (CMC) and starch (ST)), and silicas (anionic (SA) and cationic (SC)) to enhance the mechanical properties of recycled cotton fibers. The treatments were then subjected to a hierarchical ranking, with the effectiveness of each treatment determined by its impact on enhancing fiber tenacity. The findings of this research indicate that the most effective treatment was starck (ST_50), which resulted in an enhancement of tenacity from 14.63 cN/tex to 15.34 cN/tex (+4.9%), closely followed by CA-SHP_110/110, which also reached 15.34 cN/tex (+4.6%). Other notable improvements were observed with CMC_50 (15.23 cN/tex), PEG_50 (14.91 cN/tex), and CA_50 (14.89 cN/tex), all in comparison to the control. In terms of yarn quality, the CA-SHP_110/110 treatment yielded the most substantial reductions in yarn irregularities, including thin places, thick places, and neps with decreases of 36%, 10%, and 7%, respectively. Furthermore, CA_50 exhibited moderate enhancements in yarn regularity, thin places (−12%), thick places (−6.1%), and neps (−8.9%). The results of this study demonstrate that combining CA with SHP, particularly when preceded by the heating of the solution before the addition of the fibers, results in a substantial enhancement of the structural integrity, strength, and overall quality of recycled cotton fibers. This approach offers a viable pathway for the improvement of the performance of recycled cotton, thereby facilitating its wider utilization in high-quality textile products. Full article

This study investigated the conversion of cellulose from rice husk (RH) and straw (RS), two types of agricultural waste, into Carboxymethyl cellulose (CMC). Cellulose was extracted using KOH and NaOH, hydrolyzed, and bleached to increase purity and fineness. The cellulose synthesis yielded a higher net CMC content for RH-CMC (84.8%) than for RS-CMC (57.7%). Due to smaller particle sizes, RH-CMC exhibited lower NaCl content (0.77%) and higher purity. FT-IR analysis confirmed similar functional groups to commercial CMC, while XRD analysis presented a more amorphous structure and a higher degree of carboxymethylation. A biodegradable film preparation of starch-based CMC using citric acid as a crosslinking agent shows food packaging properties. The biodegradable film demonstrated good swelling, water solubility, and moisture content, with desirable mechanical properties, maximum load (6.54 N), tensile strength (670.52 kN/m²), elongation at break (13.3%), and elastic modulus (2679 kN/m²), indicating durability and flexibility. The RH-CMC film showed better chemical and mechanical properties and complete biodegradability in soil within ten days. Applying the biodegradable film for tomato preservation showed that wrapping with the film reduced weight loss more efficiently than dip coating. The additional highlight of the work was a consumer survey in Thailand that revealed low awareness but significant interest in switching to alternative uses, indicating commercial potential for eco-friendly packaging choices and market opportunities for sustainable materials. Full article

Growing concerns over the environmental impact of plastic packaging have driven interest in sustainable alternatives, particularly biopolymer-based films. This study developed ternary-blended polysaccharide gel films composed of carboxymethyl starch (CMS), chitosan (CS), and pectin (PT), with dialdehyde carboxymethyl cellulose (DCMC) as a crosslinker, and investigated the effects of honey bee brood protein (BBP) (0–0.4% w/v) on their mechanical, barrier, and thermal properties. A completely randomized design (CRD) was employed to evaluate the impact of BBP concentration on film characteristics. Results demonstrated that adding 0.4% BBP enhanced water vapor barrier properties and thermal stability while reducing hydrophilicity. The optimal formulation was observed at 0.1% BBP, providing the highest tensile strength (7.73 MPa), elongation at break (32.23%), and water-absorption capacity (369.01%). The improvements in thermal stability and hydrophilicity were attributed to BBP’s hydrophobic amino acids, which interacted with DCMC to form a denser polymer network, enhancing structural integrity and moisture resistance. Additionally, BBP incorporation contributed to the biodegradability of polysaccharide gel films, improving their environmental sustainability compared to conventional biopolymers. The findings suggest that BBP can serve as a functional additive in polysaccharide-based films, balancing performance and eco-friendliness for applications in biodegradable food and medical packaging. Full article

The high amount of starch in fruits is responsible for its post-processing cloudiness. In the current study, α-amylase from porcine pancreases was immobilized onto carboxymethyl cellulose/polyacrylamide (CMC/PAM) hydrogel. This in-house-built CMC/PAM-Amy hydrogel offers a more efficient and sustainable solution for apple juice clarification. To acquire the best immobilization efficiency, the concentration of glutaraldehyde crosslinker was optimized. Biocatalytic characterization studies were brought into consideration for free and immobilized α-amylase. The synthesized native and immobilized CMC/PAM-Amy hydrogels were also characterized using SEM, FTIR and XRD. Under ideal circumstances, the activity of CMC/PAM-Amy was up to 604 μmolmin⁻¹, and its immobilization efficiency was 96.29 ± 1.15%. A kinetic parameters study resulted in a conspicuously lowered Km value for immobilized amylase, signifying its higher affinity for its substrate. CMC/PAM-Amy showed a half-life (t_1/2) 3.5 times higher than free-Amy at 50, 55 and 60 °C. The higher values of the inactivation rate constant (k_d), free energy of inactivation (ΔG*), enthalpy of inactivation (ΔH*) and change in entropy (ΔS*) of CMC/PAM-Amy manifested the enhanced thermal stability of amylase after immobilization. A reusability study revealed that immobilized amylase retained roughly 70% of its initial catalytic activity after six successive repetitions of the process. CMC/PAM-Amy displayed improved recycling ability operational stability and biocatalytic activity, rendering it an auspicious tool in decreasing the starch content of crude apple juice to about 61% of its total starch content before treatment. Moreover, the values of Brix, viscosity, acidity and turbidity were also decreased in CMC/PAM-Amyclarified apple juice. Therefore, immobilized amylases with other industrial enzymes could be an efficient tool for potential industrial application. Full article

In this paper, amino-carboxymethyl chitosan (ACC) was prepared through amino carboxymethylation, which introduces -COOH and -NH₂ groups to the chitosan (CS) chains. Meanwhile, dialdehyde starch (DAS) was produced by oxidizing corn starch using sodium periodate. To attain the optimal loading and long-time release of ε-polylysine (ε-PL), the ACC/DAS hydrogels were synthesized through the Schiff base reaction between the amino group on ACC and the aldehyde group in DAS. The molecular structure, microcosmic properties, loading capacity, and bacteriostatic properties of the four types of hydrogels containing different mass concentrations of ACC were investigated. The results showed that the dynamic imine bond C=N existed in the ACC/DAS hydrogels, which proved that the hydrogels were formed by the cross-linking of the Schiff base reaction. With the increasing mass concentration of the ACC, the cross-sectional morphology of the hydrogel became smoother, the thermal stability increased, and the swelling behavior was gradually enhanced. The tight network structure improved the ε-PL loading efficiency, with the highest value of 99.2%. Moreover, the loading of ε-PL gave the hydrogel good antibacterial properties. These results indicate that ACC/DAS hydrogel is potential in food preservation. Full article

Antibiotic abuse in the conventional treatment of microbial infections, such as inflammatory bowel disease, induces cumulative toxicity and antimicrobial resistance which requires the development of new antibiotics or novel strategies for infection control. Crosslinker-free polysaccharide-lysozyme microspheres were constructed via an electrostatic layer-by-layer self-assembly technique by adjusting the assembly behaviors of carboxymethyl starch (CMS) on lysozyme and subsequently outer cationic chitosan (CS) deposition. The relative enzymatic activity and in vitro release profile of lysozyme under simulated gastric and intestinal fluids were investigated. The highest loading efficiency of the optimized CS/CMS-lysozyme micro-gels reached 84.9% by tailoring CMS/CS content. The mild particle preparation procedure retained relative activity of 107.4% compared with free lysozyme, and successfully enhanced the antibacterial activity against E. coli due to the superposition effect of CS and lysozyme. Additionally, the particle system showed no toxicity to human cells. In vitro digestibility testified that almost 70% was recorded in the simulated intestinal fluid within 6 h. Results demonstrated that the cross-linker-free CS/CMS-lysozyme microspheres could be a promising antibacterial additive for enteric infection treatment due to its highest effective dose (573.08 μg/mL) and fast release at the intestinal tract. Full article

In this work, rutin (RT)–loaded zein–carboxymethyl starch (CMS) nanoparticles were successfully prepared by the antisolvent precipitation method. The effect of CMS on composite nanoparticles at different concentrations was studied. When the ratio of zein–RT–CMS was 10:1:30, the encapsulation efficiency (EE) was the highest, reaching 73.5%. At this ratio, the size of the composite nanoparticles was 196.47 nm, and the PDI was 0.13, showing excellent dispersibility. The results of fluorescence spectroscopy, FTIR, XRD, and CD showed that electrostatic interaction, hydrogen bonding, and hydrophobic interaction were the main driving forces for the formation of nanoparticles. It can be seen from the FE–SEM images that the zein–RT–CMS nanoparticles were spherical. With the increase in the CMS concentration, the particles gradually embedded in the cross–linked network of CMS (10:1:50). After RT was loaded on zein–CMS nanoparticles, the thermal stability and pH stability of RT were improved. The results showed that zein–CMS was an excellent encapsulation material for bioactive substances. Full article

Crosslinked carboxymethyl rice starch (CLCMRS), prepared via dual modifications of native rice starch (NRS) with chloroacetic acid and sodium trimetaphosphate, was employed to facilitate the disintegration of hydroxypropylmethylcellulose (HPMC) orodispersible films (ODFs), with or without the addition of glycerol. Fabricated by using the solvent casting method, the composite films, with the HPMC--LCMRS ratios of 9:1, 7:1, 5:1 and 4:1, were then subjected to physicochemical and mechanical evaluations, including weight, thickness, moisture content and moisture absorption, swelling index, transparency, folding endurance, scanning electron microscopy, Fourier transform infrared spectroscopy, tensile strength, elongation at break, and Young’s modulus, as well as the determination of disintegration time by using the Petri dish method (PDM) and slide frame and bead method (SFM). The results showed that HPMC-CLCMRS composite films exhibited good film integrity, uniformity, and transparency with up to 20% CLCMRS incorporation (4:1 ratio). Non-plasticized composite films showed no significant changes in the average weight, thickness, density, folding endurance (96–122), tensile strength (2.01–2.13 MPa) and Young’s modulus (10.28–11.59 MPa) compared to HPMC film (135, 2.24 MPa, 10.67 MPa, respectively). On the other hand, the moisture content and moisture absorption were slightly higher, whereas the elongation at break (EAB; 4.31–5.09%) and the transparency (4.73–6.18) were slightly lowered from that of the HPMC film (6.03% and 7.03%, respectively). With the addition of glycerol as a plasticizer, the average weight and film thickness increased, and the density decreased. The folding endurance was improved (to >300), while the transparency remained in the acceptable range. Although the tensile strength of most composite films decreased (0.66–1.75 MPa), they all exhibited improved flexibility (EAB 7.27–11.07%) while retaining structural integrity. The disintegration times of most composite films (PDM 109–331, SFM 70–214 s) were lower than those of HPMC film (PDM 345, SFM 229 s). In conclusion, the incorporation of CLCMRS significantly improved the disintegration time of the composite films whereas it did not affect or only slightly affected the physicochemical and mechanical characteristics of the films. The 5:1 and 4:1 HPMC:CLCMRS composite films, in particular, showed promising potential application as a film base for the manufacturing of orodispersible film dosage forms. Full article

Due to the growing demand for sustainable hygiene products (that will exhibit biodegradability and compostability properties), the challenge of developing a superabsorbent polymer that absorbs significant amounts of liquid has been raised so that it can be used in the hygiene sector in the future. The work covers the study of the swelling and dehydration kinetics of hydrogels formed by grafting polymerization of carboxymethyl starch (CMS) and chitosan (Ch). Vanillin (Van) was used as the crosslinking agent. The swelling and dehydration kinetics of the polymers were measured in various solutes including deionized water buffers with pH from 1 to 12 and in aqueous solutions of sodium chloride at 298 and 311 K. The surface morphology and texture properties of the analyzed hydrogels were observed by scanning electron microscopy (SEM). The influence of this structure on swelling and dehydration is discussed. Fourier transform infrared (FTIR) analyses confirmed the interaction between the carboxymethyl starch carbonyl groups and the chitosan amino groups in the resulting hydrogels. Additionally, spectroscopic analyses confirmed the formation of acetal crosslink bridges including vanillin molecules. The chemical dynamics studies revealed that new hydrogel dehydration kinetics strongly depend on the vanillin content. The main significance of the study concerns the positive results of the survey for the new superabsorbent polymer material, coupling high fluid absorbance with biodegradability. The studies on biodegradability indicated that resulting materials show good environmental degradability characteristics and can be considered true biodegradable superabsorbent polymers. Full article

Starch extracted from KJ CMU-107 rice, with amylose content of 13.4%, was modified to yield pre-gelatinized starch (PGS), carboxymethyl starch (CMS), crosslinked carboxymethyl starch (CLCMS), crosslinked starch (CLS), and hydroxypropyl starch (HPS). Their physicochemical properties were assessed in comparison with the native starch (NS), and their functional properties were then evaluated for potential use as pharmaceutical excipients. Scanning electron microscopic (SEM) images and X-ray diffraction (XRD) patterns showed that granules of all but one of the modified starches retained the native character and crystalline arrangement. The exception, PGS, exhibited extensive granular rupture, which correlated with the loss of crystallinity suggested by the amorphous halo in XRD. Energy-dispersive X-ray (EDX) data confirmed the modification by the presence of related elements. Carboxymethylation increased solubility in unheated water, while crosslinking improved swelling. All modified starches displayed improved oil absorption capacity by 17–64%, while CMS and CLCMS also exhibited significant moisture sorption at above 75% RH PGS and HPS exhibited lower gelatinization temperature (Tg) and enthalpic change (ΔH), while CLS showed higher Tg and ΔH. CMS, CLCMS, and CLS showed adequate powder flow and compactibility, qualifying as potential tablet excipients. The 5% w/v solutions of CMS, CLMS, and HPS also formed intact films with suitable tensile strength. Overall, modified starches derived from KJ CMU-107 could potentially be developed into new pharmaceutical excipients. Full article

In this study, nanocomposite hydrogels composed of sodium carboxymethylated starch (CMS)-containing CuO nanoparticles (CMS@CuO) were synthesized and used as experimental wound healing materials. The hydrogels were fabricated by a solution-casting technique using citric acid as a crosslinking agent. They were characterized by Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and thermogravimetric analysis (TGA) to evaluate their physicochemical properties. In addition, swelling, antibacterial activities, antioxidant activities, cytotoxicity, and in vivo wound healing were investigated to evaluate the wound healing potential of the CMS@CuO nanocomposite hydrogels. Growth inhibition of the Gram-positive and Gram-negative pathogens, antioxidant activity, and swelling were observed in the CMS@CuO nanocomposite hydrogels containing 2 wt.% and 4 wt.% CuO nanoparticles. The hydrogel containing 2 wt.% CuO nanoparticles displayed low toxicity to human fibroblasts and exhibited good biocompatibility. Wounds created in rats and treated with the CMS@2%CuO nanocomposite hydrogel healed within 13 days, whereas wounds were still present when treated for the same time-period with CMS only. The impact of antibacterial and antioxidant activities on accelerating wound healing could be ascribed to the antibacterial and antioxidant activities of the nanocomposite hydrogel. Incorporation of CuO nanoparticles in the hydrogel improved its antibacterial properties, antioxidant activity, and degree of swelling. The present nanocomposite hydrogel has the potential to be used clinically as a novel wound healing material. Full article

In this paper, the authors discuss the results of research on the preparation and properties of superabsorbent hydrogels based on carboxymethylated high-amylose corn starches. They were obtained by graft copolymerisation (in an aqueous environment) of acrylic acid and its sodium salt onto modified starches (with various substitution degrees DS = 0.2 and 0.8), using potassium persulfate as an initiator and N,N’-methylenebisacrylamide (MBA) as a cross-linker. Modified starches, with various DS, were used to synthesise two series of hydrogels with varying molar ratios of cross-linkers to monomers. The swelling behaviour of hydrogels was studied and their properties were estimated using the kinetic equation. The occurrence of starch–polyacrylic acid covalent interactions was demonstrated by FTIR analysis. Nonlinear rheological methods have proved to be very effective in assessing the mechanical properties of hydrogels. LAOS (large -amplitude oscillatory shear) analysis allowed the determination of the durability of the gel structure as a function of the amount of absorbed water. Full article

In the present study, CMSS (carboxymethyl sago starch)-based hydrogel was synthesized by crosslinking with citric acid via esterification and then applied as a metal sorbent to overcome excessive heavy metal pollution. The CMSS/CA (carboxymethyl sago starch/citric acid) hydrogel was characterized by Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The absorption band at 1726 cm⁻¹ was observed in the FT-IR spectrum of CMSS/CA hydrogel and indicated ester bonds formed. Further findings show that the cross-linkages in the CMSS/CA hydrogel increased the thermal stability of CMSS and various sizes of pores were also shown in the SEM micrograph. Conversely, the removal of heavy metals was analyzed using Inductively Coupled Plasma-Optic Emission Spectra (ICP-OES). The effects of the pH of the metal solution, contact time, initial concentration of the metal ions and temperature on the sorption capacity were investigated. Under optimum condition, the sorption capacity of Pb²⁺, Cu²⁺, Ni²⁺ and Zn²⁺ onto CMSS/CA hydrogel were 64.48, 36.56, 16.21, 18.45 mg/g, respectively. The experiments demonstrated that CMSS/CA hydrogel has high selectivity towards Pb²⁺ in both non-competitive and competitive conditions. In conclusion, the CMSS/CA hydrogel as a natural based heavy metal sorption material exhibited a promising performance, especially in the sorption of Pb²⁺ for wastewater treatment. Full article

The carboxymethylated derivatives of starch (CMS) and cellulose (CMC) were used for film preparation. The infrared spectroscopy revealed that crosslinking via ester bridges with citric acid occurred between the two polysaccharide derivatives. The effect of polysaccharide derivatives ratio on physicochemical properties of prepared films was evaluated. Generally, the values of tested parameters (moisture absorption, surface roughness, and mechanical and thermal properties) were between the values noted for neat CMS or CMC-based films. However, the physicochemical properties of the system with equal CMS/CMC weight ratio diverged from this trend, i.e., the highest tensile strength, the highest Young’s modulus (ca. 3.4 MPa and ca. 4.9 MPa, respectively), with simultaneously the lowest moisture absorption (18.5% after 72 h) have been noted. Such systems could potentially find application in agriculture or pharmacy. Full article