Search Results (18)

The evolution of neutron scattering from reactor-based steady-state sources to high-power pulsed spallation sources has necessitated a paradigm shift in neutron optics. While pulsed sources offer high peak brilliance and energy-resolved measurements via the time-of-flight (TOF) technique, the intrinsic divergence and broad wavelength bandwidth of the incident beam pose significant challenges for focusing, particularly in the realm of very small-angle neutron scattering (VSANS, Q < 0.001 Å⁻¹). This review presents a comprehensive analysis of diverse focusing techniques, including converging multi-slit apertures, electrical and superconducting magnetic sextupole lenses, grazing-incidence focusing mirrors, compound refractive lenses with oscillation apertures, and a special multi-beam VSANS configuration. Special attention is given to the transition from permanent magnet systems to nested rotating sextupole permanent magnets (Nest-Rot-SPM) and modulated superconducting sextupoles (SSM), detailing the physical and engineering challenges involved. Furthermore, grazing-incidence reflective optics, notably toroidal Wolter mirrors, are discussed as an achromatic alternative. The integration of these technologies into world-leading pulsed neutron sources is reviewed to project the future landscape of extended Q-range coverage for SANS instruments. Full article

High-throughput and compact volume phase holographic (VPH) grating transmission spectrometers are widely employed in scientific research, agriculture, and industrial applications. Conventional transmission spectrometers generally adopt a fixed configuration and therefore have limitations in simultaneously achieving high spectral resolution and broad wavelength coverage. To address the limited tunability of transmission spectrometers, this work presents the theoretical analysis and experimental validation of a transmission spectrometer incorporating a novel catadioptric grating assembly, which consists of a transmitting VPH and a planar reflector. A catadioptric system is a combination of reflective (catoptric) and refractive (dioptric) elements. In the proposed configuration, a VPH grating and a plane mirror arranged at a fixed 90° angle form the catadioptric dispersion module. Synchronous rotation of this assembly enables wavelength scanning. The structure ensures that the diffracted ray along the optical axis of the imaging lens maintains the Bragg condition across the scanning range, thereby preserving maximum diffraction efficiency. The optical configuration and structural parameters of the spectrometer were theoretically derived, and a prototype spectrometer with an f-number of 1.8 employing a 2400 g/mm grating was constructed. Measurements demonstrate that, when the rotation angle is tuned from 30.5° to 50.5°, the accessible spectral range covers from 410 nm to 650 nm. Spectral response measurements using a tungsten–halogen light source confirm that the spectrometer maintains an acceptable diffraction efficiency across the entire tuning range. The measured spectral resolution is 0.1 nm at 626 nm with a 2400 g/mm grating and 0.18 nm with a 1500 g/mm grating. The spectrometer was further applied to fiber-enhanced gas Raman spectroscopy, where it successfully resolved the closely spaced Raman peaks of CH₄ and C₂H₆ that are difficult to distinguish using conventional compact spectrometers. These results demonstrate that the proposed tunable catadioptric spectrometer simultaneously provides excellent wavelength tunability and high spectral resolution. Full article

This paper presents a compact wide bandwidth, wide beamwidth circularly polarized (CP) antenna for satellite communication (SatCom) mobile terminals. The radiator is based on a cavity-backed crossed dipole, while a commercial quadrature power-divider/phase-shifter IC replaces conventional quarter-wavelength phase-delay lines to suppress dispersion-induced phase errors and maintain stable CP performance over a broad frequency range. To broaden the beam, a tightly coupled arc-shaped parasitic strip encircles the tapered semicircular arms, and the cavity cross-section is reduced to enhance lateral radiation. In addition, the cavity sidewalls are electrically connected to the parasitic element to increase the effective electrical length, downshift the operating frequency, and enable miniaturization. A prototype was fabricated and measured. The measured impedance bandwidth (IMBW, |S11| < −10 dB) is 1.76–3.08 GHz, fully covered by the AR < 3 dB bandwidth. The peak gain remains above 2 dBic over 1.7–3.1 GHz, while the half-power beamwidth (HPBW) stays around 114–142° and the 3 dB axial-ratio beamwidth (ARBW, AR < 3 dB) is around 114–144° across the entire operating band. These results indicate that the proposed antenna is a promising candidate for integrated multi-band SatCom terminals requiring wide bandwidth operation and wide-angle coverage. Full article

Directional Antenna Modulation (DAM) utilizing 2D conformal phased arrays has been demonstrated to enable secure Multi-directional Independent Transmission (MIT) over a broad angular range. This paper proposes an unbalanced DAM technique that dynamically allocates power according to transmission distance, thereby significantly enhancing transmission efficiency in practical scenarios where receivers are located at varying distances. In particular, a high-efficiency Differential Evolution (DE) optimization algorithm integrated with an “alien species invasion” mechanism is developed to accelerate convergence and optimize the phase delays of each array element. Bit Error Rate (BER) analysis for MIT reveals superior directional security compared to traditional methods, with conformal arrays providing wider angular coverage and spherical sparse arrays overcoming the half-wavelength spacing limitation. The simulation results validate that the proposed system achieves simultaneous secure transmissions in multiple directions while maintaining a BER below −40 dB. Full article

This paper investigates the symmetrical layout effect in ultrasonic cleaning via acoustic solid coupling simulation, with emphasis on how the symmetrical arrangement of transducers influences sound pressure distribution. Two specific transducer layout methods are examined: uniform arrangement at the bottom and symmetrical arrangement along the sides. The findings indicate that when the tank length is an integer multiple of one-quarter of the acoustic wavelength, the symmetrical side arrangement markedly enhances the sound pressure level within the tank and optimizes the propagation and reflection of acoustic waves. In megasonic cleaning, focusing is achieved through a 7 × 7 transducer array by precisely controlling the phase, and the symmetrical arrangement ensures uniform sound pressure distribution. By integrating 1 MHz megasonic sources from both focused and unfocused configurations, the overall sound pressure distribution and peak sound pressure at the focal point are calculated using multi-physics field coupling simulations. A comparative analysis of the sound fields generated by focused and unfocused sources reveals that the focused source can produce significantly higher sound pressure in specific regions. Leveraging the enhanced cleaning capability of the focused acoustic wave in targeted areas while maintaining broad coverage with the unfocused acoustic wave significantly improves the overall cleaning efficiency. Ultrasonic cleaning finds extensive applications in industries such as electronic component manufacturing, medical device sterilization, and automotive parts cleaning. Its efficiency and environmental friendliness make it highly significant for both daily life and industrial production. Full article

Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr₃) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr₃/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr₃ solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution’s stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr₃ on GaAs. Compared to the pristine MAPbBr₃, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr₃ polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10⁻⁸ A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 10¹⁰ and 1 × 10¹¹ Jones at −1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors. Full article

Silver (Ag) thin films have garnered significant attention due to their unique optical properties. This paper systematically investigates the optical characteristics of Ag films prepared using the electron beam evaporation method. The investigation was conducted using spectroscopic ellipsometry and covers a broad wavelength range of 1679 nm to 36 µm (0.738–0.034 eV), spanning from near-infrared to far-infrared regions. Optical and dispersion models were developed to analyze the impacts of Ag nanostructures on the complex refractive indices, dielectric functions, and reflectance. The results indicate that Ag particles and coalescence films exhibit non-metallic and low absorption properties, while Ag percolation and continuous films present a typical Drude model. The reflectance of Ag films increases as the film coverage ratio increases, and it can reach close to 100% in continuous film. Additionally, a non-destructive, non-contact, and vacuum-free means of confirming the percolation threshold of Ag films was proposed based on the slope of the imaginary part curve. This work is useful to guide simulations and provide a basis for the applications of Ag films in different fields. Full article

Diamond and gold mining has been practiced by artisanal miners in the Central African Republic (CAR) for decades. The recent introduction of riverine dredges indicates a transition from artisanal/manual digging and sorting techniques to small-scale mining methods. This study implements a remote sensing analysis of Synthetic Aperture Radar (SAR) data to map gold and diamond dredges operating on the Kadéï (Sangha) river in the CAR. Riverine vessels are identified in Sentinel-1 SAR data between 2015 and 2019, and their activity levels are mapped over time. The number of active dredges identified on the river increased over the five years studied, with the largest increase occurring between 2016 and 2017. Detailing a method for mapping and monitoring riverine diamond and gold dredge mining is an important step in keeping up with evolving technologies and new areas of mineral exploitation and in helping address concerns over resource governance in remote and conflict-prone terrain. The use of SAR technology, with its weather-independence, broad coverage, and available wavelength combinations, allows for higher temporal resolution and improved vessel detection in the monitoring of small-scale mining (SSM) dredges. Full article

A method for full Stokes polarization imaging based on broadband liquid crystal polarization grating (LCPG) is presented. Firstly, the properties of the LCPG-based polarization detection module, which consists of a phase retarder and a broadband polarization grating in series, were investigated by means of Stokes calculus. The relationship between the polarization state of the incidence and the efficiencies of the diffractions was derived. Then, the azimuth parameters of the polarization detection module were optimized by using an equally weighted variance (EWV) evaluation criterion. Finally, the detection of the linearly and arbitrarily polarized laser beam and a linearly polarized broadband object were experimentally verified. The proposed method provides the design of polarization imaging systems based on LCPGs and has the advantages of compact structure, and broad wavelength coverage, therefore offering potential applications for image polarization information acquisition. Full article

Due to the important application in the study of vibrational circular dichroism and helical dichroism of chiral molecules, the tunable vortex beam at mid-infrared region has attracted increasing attention. Based on orbital angular momentum (OAM) conservation in nonlinear interactions, the vortex pumped singly resonant optical parametric oscillator (SRO) is recognized as a versatile source of coherent vortex radiation providing high power and broad wavelength coverage from a single device. However, the low parametric gain and high oscillation threshold under continuous wave (cw) pumping has so far been the most challenging factor in generating cw tunable vortex beams. To predict the output characteristic of vortex pumped SRO, a theoretical model describing the vortex pumped SRO is needed. In this study, the theoretical model describing the vortex pumped SRO is set up under collimated Gaussian beam approximation. Output characteristics of different SROs are simulated numerically. By proper selection of pump scheme (such as double-pass pumping scheme), the vortex pumped mid-infrared SRO can oscillate at a relatively low pump power. By controlling the gain (mode overlap ratio between the pump and resonant wave in the nonlinear crystal) and loss (employing a spot-defect mirror with different defect size as the output coupler) of the resonant signal mode in the SRO, the OAM of the pump beam can be directionally transferred to a specific down converted beam. The transfer mechanism of the OAM among the pump light and the down-converted beams and factors affecting the transfer are studied. Our study provides the guidelines for the design and optimization of vortex pumped SRO under cw operation. Full article

We propose new a Si-based waveguided Superlattice-on-Insulator (SLOI) platforms for high-performance electro-optical (EO) 2 × 2 and N × M switching and 1 × 1 modulation, including broad spectrum and resonant. We present a theoretical investigation based on the tight-binding Hamiltonian of the Pockels EO effect in the lattice-matched undoped ${\left(\mathrm{GaP}\right)}_N/{\left({\mathrm{Si}}_2\right)}_M$, ${\left(\mathrm{AlP}\right)}_N/{\left({\mathrm{Si}}_2\right)}_M$, ${\left(\mathrm{ZnS}\right)}_N/{\left({\mathrm{Si}}_2\right)}_M$, ${\left(\mathrm{AlN}\right)}_N/{\left(3\mathrm{C}-\mathrm{SiC}\right)}_M$, ${\left(\mathrm{GaAs}\right)}_N/{\left({\mathrm{Ge}}_2\right)}_M$, ${\left(\mathrm{ZnSe}\right)}_N/{\left(\mathrm{GaAs}\right)}_M$, and ${\left(\mathrm{ZnSe}\right)}_N/{\left({\mathrm{Ge}}_2\right)}_M$ wafer-scale short-period superlattices that are etched into waveguided networks of small-footprint Mach-Zehnder interferometers and micro-ring resonators to yield opto-electronic chips. The spectra of the Pockels r₃₃ coefficient have been simulated as a function of the number of the atomic monolayers for “non-relaxed” heterointerfaces. The large obtained r₃₃ values enable the SLOI circuit platforms to offer a very favorable combination of monolithic construction, cost-effective manufacturability, high modulation/switching speed, high information bandwidth, tiny footprint, low energy per bit, low switching voltage, near-IR-and-telecom wavelength coverage, and push-pull operation. By optimizing waveguide, clad, and electrode dimensions, we obtained very desirable values of the V_πL performance metric, in the range of 0.062 to 0.275 V·cm, portending a bright future for a variety of applications, such as sensor networks or Internet of Things (IoT). Full article

Each of the giant planets, Jupiter, Saturn, Uranus, and Neptune, has been observed by at least one robotic spacecraft mission. However, these missions are infrequent; Uranus and Neptune have only had a single flyby by Voyager 2. The Hubble Space Telescope, particularly the Wide Field Camera 3 (WFC3) and Advanced Camera for Surveys (ACS) instruments, and large ground-based telescopes with adaptive optics systems have enabled high-spatial-resolution imaging at a higher cadence, and over a longer time, than can be achieved with targeted missions to these worlds. These facilities offer a powerful combination of high spatial resolution, often <0.05”, and broad wavelength coverage, from the ultraviolet through the near infrared, resulting in compelling studies of the clouds, winds, and atmospheric vertical structure. This coverage allows comparisons of atmospheric properties between the planets, as well as in different regions across each planet. Temporal variations in winds, cloud structure, and color over timescales of days to years have been measured for all four planets. With several decades of data already obtained, we can now begin to investigate seasonal influences on dynamics and aerosol properties, despite orbital periods ranging from 12 to 165 years. Future facilities will enable even greater spatial resolution and, combined with our existing long record of data, will continue to advance our understanding of atmospheric evolution on the giant planets. Full article

Organic light-emitting diodes (OLEDs) used as phototherapy light sources require sufficient spectral distribution in the effective wavelength ranges and low operating voltages. Herein, a double emitting layer structure consisting of a red-emitting Ir(piq)₂acac and a deep-red Ir(fliq)₂acac was designed to generate a broad electroluminescence spectrum. An efficient TCTA:CN-T2T exciplex system was used as the host of the emitting layer, facilitating effective energy transfer from the exciplex host to the red and deep-red phosphors. The materials used in the exciplex host were also used as the carrier transport layers to eliminate the energy barriers and thus increase the current density. The hole injection layer structures were varied to examine the hole injection capabilities and the carrier balance. The resulting optimized phosphorescent OLEDs with a broad spectral profile exhibit a 90% coverage ratio in the target ranges from 630 to 690 nm, together with a high peak efficiency of 19.1% (10.2 cd/A and 13.8 lm/W). The proposed device only needs 5.2 V to achieve a power density of 5 mW/cm², implying that the device could be driven via two series-connected button cell batteries. These results illustrate the feasibility of our design concepts and demonstrate the realization of a portable and lightweight OLED phototherapy light source. Full article

The Advanced Hyperspectral Imager (AHSI), carried by the Gaofen-5 (GF-5) satellite, is the first hyperspectral sensor that simultaneously offers broad coverage and a broad spectrum. Meanwhile, deep-learning-based approaches are emerging to manage the growing volume of data produced by satellites. However, the application potential of GF-5 AHSI imagery in lithological mapping using deep-learning-based methods is currently unknown. This paper assessed GF-5 AHSI imagery for lithological mapping in comparison with Shortwave Infrared Airborne Spectrographic Imager (SASI) data. A multi-scale 3D deep convolutional neural network (M3D-DCNN), a hybrid spectral CNN (HybridSN), and a spectral–spatial unified network (SSUN) were selected to verify the applicability and stability of deep-learning-based methods through comparison with support vector machine (SVM) based on six datasets constructed by GF-5 AHSI, Sentinel-2A, and SASI imagery. The results show that all methods produce classification results with accuracy greater than 90% on all datasets, and M3D-DCNN is both more accurate and more stable. It can produce especially encouraging results by just using the short-wave infrared wavelength subset (SWIR bands) of GF-5 AHSI data. Accordingly, GF-5 AHSI imagery could provide impressive results and its SWIR bands have a high signal-to-noise ratio (SNR), which meets the requirements of large-scale and large-area lithological mapping. And M3D-DCNN method is recommended for use in lithological mapping based on GF-5 AHSI hyperspectral data. Full article

Conventional mechanical Fourier Transform Spectrometers (FTS) can simultaneously measure absorption and dispersion spectra of gas-phase samples. However, they usually need very long measurement times to achieve time-resolved spectra with a good spectral and temporal resolution. Here, we present a mid-infrared dual-comb-based FTS in an asymmetric configuration, providing broadband absorption and dispersion spectra with a spectral resolution of 5 GHz (0.18 nm at a wavelength of 3333 nm), a temporal resolution of 20 μs, a total wavelength coverage over 300 cm⁻¹ and a total measurement time of ~70 s. We used the dual-comb spectrometer to monitor the reaction dynamics of methane and ethane in an electrical plasma discharge. We observed ethane/methane formation as a recombination reaction of hydrocarbon radicals in the discharge in various static and dynamic conditions. The results demonstrate a new analytical approach for measuring fast molecular absorption and dispersion changes and monitoring the fast dynamics of chemical reactions over a broad wavelength range, which can be interesting for chemical kinetic research, particularly for the combustion and plasma analysis community. Full article