Search Results (6)

Insights from Indigenous and Western ways of knowing can improve how we understand, manage, and restore complex freshwater social–ecological systems. While many frameworks exist, specific methods to guide researchers and practitioners in bringing Indigenous and Western knowledge systems together in a ‘good way’ are harder to find. A scoping review of academic and grey literature yielded 138 sources, from which data were extracted using two novel frameworks. The EAUX (Equity, Access, Usability, and eXchange) framework, with a water-themed acronym, summarizes important principles when braiding knowledge systems. These principles demonstrate the importance of recognizing Indigenous collaborators as equal partners, honouring data sovereignty, centring Indigenous benefits, and prioritizing relationships. The A-to-A (Axiology and Ontology, Epistemology and Methodology, Data Gathering, Analysis and Synthesis, and Application) framework organizes methods for braiding knowledge systems at different stages of a project. Methods are also presented using themes: open your mind to different values and worldviews; prioritize relationships with collaborators (human and other-than-human); recognize that different ways of regarding the natural world are valid; and remember that each Indigenous partner is unique. Appropriate principles and practices are context-dependent, so collaborators must listen carefully and with an open mind to identify braiding methods that are best for the project. Full article

Protein self-assembly into fibrils and oligomers plays a key role in the etiology of degenerative diseases. Several pathways for this self-assembly process have been described and shown to result in different types and ratios of final assemblies, therewith defining the effective physiological response. Known factors that influence assembly pathways are chemical conditions and the presence or lack of agitation. However, in natural and industrial systems, proteins are exposed to a sequence of different and often complex mass transfers. In this paper, we compare the effect of two fundamentally different mass transfer processes on the fibrilization process. Aggregation-prone solutions of hen egg white lysozyme were subjected to predominantly non-advective mass transfer by employing centrifugation and to advective mass transport represented by orbital shaking. In both cases, fibrilization was triggered, while in quiescent only oligomers were formed. The fibrils obtained by shaking compared to fibrils obtained through centrifugation were shorter, thicker, and more rigid. They had rod-like protofibrils as building blocks and a significantly higher β-sheet content was observed. In contrast, fibrils from centrifugation were more flexible and braided. They consisted of intertwined filaments and had low β-sheet content at the expense of random coil. To the best of our knowledge, this is the first evidence of a fibrilization pathway selectivity, with the fibrilization route determined by the mass transfer and mixing configuration (shaking versus centrifugation). This selectivity can be potentially employed for directed protein fibrilization. Full article

With global warming, permafrost is undergoing degradation, which may cause thawing subsidence, collapse, and emission of greenhouse gases preserved in previously frozen permafrost, change the local hydrology and ecology system, and threaten infrastructure and indigenous communities. The Qinghai-Tibet Plateau (QTP) is the world’s largest permafrost region in the middle and low latitudes. Permafrost status monitoring in the QTP is of great significance to global change and local economic development. In this study, we used 66 scenes of ALOS data (2007–2009), 73 scenes of ALOS-2 data (2015–2020) and 284 scenes of Sentinel-1 data (2017–2021) to evaluate the spatial and temporal permafrost deformation over the 83,000 km² in the northern QTP, passing through the Tuotuohe, Beiluhe, Wudaoliang and Xidatan regions. We use the SBAS-InSAR method and present a coherence weighted least squares estimator without any hypothetical model to calculate long-term deformation velocity (LTDV) and maximum seasonal deformation (MSD) without any prior knowledge. Analysis of the ALOS results shows that the LTDV ranged from −20 to +20 mm/year during 2007–2009. For the ALOS-2 and Sentinel-1 results, the LTDV ranged from −30 to 30 mm/year during 2015–2021. Further study shows that the expansion areas of permafrost subsidence are concentrated on braided stream plains and thermokarst lakes. In these areas, due to glacial erosion, surface runoff and river alluvium, the contents of water and ground ice are sufficient, which could accelerate permafrost subsidence. In addition, by analyzing LTDV and MSD for the different periods, we found that the L-band ALOS-2 is more sensitive to the thermal collapse of permafrost than the C-band sensor and the detected collapse areas (LTDV < −10 mm/year) are consistent with the GF-1/2 thermal collapse dataset. This research indicates that the InSAR technique could be crucial for monitoring the evolution of permafrost and freeze-thaw disasters. Full article

The active-channel planform adjustments that have occurred along the Centa, lower Arroscia and lower Neva rivers since 1930, along with the riverbed channelization processes and the land-use and land-cover changes in disconnected riverine areas, were investigated through a multitemporal analysis based on remote sensing and geographical information systems (GIS). These watercourses flow through the largest Ligurian alluvial-coastal plain in a completely anthropogenic landscape. This research is based on the integrated use of consolidated and innovative metrics for riverbed planform analysis. Specific indices were introduced to assess active-channel lateral migration in relation to the active-channel area abandonment and formation processes. The Arroscia and Neva riverbeds experienced narrowing, progressive stabilization, and braiding phenomena disappearance from 1930 to the early 1970s, and then slight narrowing up to the late 1980s. Subsequently, generalized stability was observed. Conversely, the Centa was not affected by relevant planform changes. Recently, all rivers underwent a slight to very slight width increase triggered by the November 2016 high-magnitude flood. The active-channel adjustments outlined in this paper reflect the relevant role in conditioning the river morphology and dynamics played by channelization works built from the 1920s to the early 1970s. They (i) narrowed, straightened, and stabilized the riverbed and (ii) reduced the floodable surface over the valley-floor. Thus, large disconnected riverine areas were occupied by human activities and infrastructures, resulting in a progressive increase in vulnerable elements exposed to hydrogeomorphic hazards. The outlined morphological dynamics (i) display significant differences in terms of chronology, type, and magnitude of active-channel planform adjustments with respect to the medium- and short-term morphological evolution of most Italian rivers and (ii) reflect the widespread urbanization of Ligurian major valley floors that occurred over the 20th century. The outcomes from this study represent an essential knowledge base from a river management perspective; the novel metrics enlarge the spectrum of available GIS tools for active-channel planform analysis. Full article

In industry, manufacturing has a huge imprint on structural design; which particularly holds for composites. This is caused by complex interaction of geometry, process parameters and material quantities e.g., fiber orientation. This interaction yields a wide variety of feasible designs, which severely differ in costs and structural performance, measured in mass, stiffness and strength. In order to cope most effectively with this complexity, this paper discusses a weak artificial intelligence, emulating human expertise on composite manufacturing. This approach is extended such that the used knowledge-based system is capable of providing a reason for having determined a certain level of manufacturing effort. Moreover, this extension also provides advice pointing into the direction of optimal improvement. These novelties may be used during designing, optimization and post-processing. These three cases are herein discussed by applying it onto an automotive structure. Full article

The self-assembly of alkaline earth carbonates in the presence of silica at high pH leads to a unique class of composite materials displaying a broad variety of self-assembled superstructures with complex morphologies. A detailed understanding of the formation process of these purely inorganic architectures is crucial for their implications in the context of primitive life detection as well as for their use in the synthesis of advanced biomimetic materials. Recently, great efforts have been made to gain insight into the molecular mechanisms driving self-assembly in these systems, resulting in a consistent model for morphogenesis at ambient conditions. In the present work, we build on this knowledge and investigate the influence of temperature, supersaturation, and an added multivalent cation as parameters by which the shape of the forming superstructures can be controlled. In particular, we focus on trumpet- and coral-like structures which quantitatively replace the well-characterised sheets and worm-like braids at elevated temperature and in the presence of additional ions, respectively. The observed morphological changes are discussed in light of the recently proposed formation mechanism with the aim to ultimately understand and control the major physicochemical factors governing the self-assembly process. Full article