Search Results (22)

This work presents the fabrication and characterization of biohybrid optoelectronic devices based on the integration of bacteriorhodopsin (bR) and PEDOT:PSS on interdigitated electrodes (IDEs). A three-phase methodology was developed to systematically optimize the active layer. First, the effect of an electric field applied during PEDOT:PSS drying was investigated, identifying a drying voltage of 1.2 V as the optimum among the tested conditions, achieving a maximum responsivity of $(35.65\pm 1.36)$ mA/W, a minimum noise equivalent power of $(5.99\pm 0.13)\times {10}^{-10}$ W·H${\mathrm{z}}^{-1/2}$, and a maximum specific detectivity of $(3.55\pm 0.07)\times {10}^8$ cm H${\mathrm{z}}^{1/2}$${\mathrm{W}}^{-1}$. Second, the compatibility of a physiological buffer for bR stabilization was assessed, demonstrating that a 60% PEDOT:PSS/40% buffer composition preserved and further improved the optoelectronic performance of the polymer matrix. Finally, bacteriorhodopsin was incorporated into the optimized PEDOT:PSS/buffer formulation, yielding the hybrid bR_1.2V_60% device, which exhibited an on/off ratio of 2.45 at 0 V and a maximum responsivity of $(5.63\pm 0.76)$ mA/W under reverse bias. Morphological analysis suggested improved film homogeneity, together with a continuous polymer matrix containing dispersed crystalline buffer-salt inclusions. Dynamic measurements showed a stable and reversible short-term photoresponse over successive illumination cycles ($\Delta I_{\mathrm{ON}}=18.54\pm 0.17$$\mathsf{\mu }$A) with full baseline recovery. These results demonstrate a scalable strategy for the development of biohybrid photodetectors with potential for low-power and sustainable optoelectronic applications. Full article

The photoreceptor bacteriorhodopsin (HsBR) from Halobacterium salinarum is a model system for studying ultrafast photoinduced reactions in proteins. Recent time-resolved serial femtosecond crystallography (TR-SFX) experiments require high pump energies, raising concerns about nonlinear excitation and multi-photon effects. Here, we systematically investigate the influence of excitation energy, pulse duration and the sign of the chirp on the initial HsBR photo-reaction using femtosecond Vis-pump IR-probe spectroscopy in the retinal C=C stretching region. An acousto-optic programmable dispersive filter enabled independent control of pulse energy and chirp. Within the tested range, the retinal dynamics were independent of pulse duration and chirp, indicating that fluence alone does not fully describe excitation conditions. Increasing excitation energy leads to nonlinear saturation of the retinal signals and the appearance of an additional band near 1550 ${\mathrm{cm}}^{-1}$. However, this band rises linearly with the excitation energy. Hence, the additional band is not directly caused by non-resonant multi-photon absorption. Spectral decomposition reveals two components: a low-energy contribution consistent with the known retinal isomerization dynamics and a high-energy contribution attributed to a small population of photo-damaged HsBR likely formed via a resonant two-photon process. These findings clarify the role of excitation conditions in ultrafast HsBR spectroscopy and suggest that spectral changes at high pump energies mainly arise from damaged species upon resonant two-photon excitation. Full article

This study elucidates the structural determinants and optogenetic potential of Archaerhodopsin HeAR, a proton pump from Halorubrum sp. Ejinoor isolated from Inner Mongolian salt lakes. Through heterologous expression in E. coli BL21 (DE3) and integrative biophysical analyses, we demonstrate that HeAR adopts a stable trimeric architecture (129 kDa) with detergent-binding characteristics mirroring bacteriorhodopsin (BR); however, it exhibits a 10 nm bathochromic spectral shift (λmax = 550 nm) and elevated proton affinity (Asp-95 pKa = 3.5 vs. BR Asp-85 pKa = 2.6), indicative of evolutionary optimization in its retinal-binding electrostatic microenvironment. Kinetic profiling reveals HeAR’s prolonged photocycle (100 ms vs. BR’s 11 ms), marked by rapid M-state decay (3.3 ms) and extended dark-adaptation half-life (160 min), a bistable behavior attributed to enhanced hydrogen bond persistence (80%) and reduced conformational entropy (RMSD = 2.0 Å). Functional assays confirm light-driven proton extrusion (0.1 ng H⁺/mg·s) with DCCD-amplified flux (0.3 ng H⁺/mg·s) and ATP synthesis (0.3 nmol/mg·s), underscoring its synergy with H⁺-ATPase. Phylogenetic and structural analyses reveal 95% homology with Halorubrum AR4 and conservation of 11 proton-wire residues, despite divergent Trp/Tyr/Ser networks that redefine chromophore stabilization. AlphaFold-predicted models (TM-score > 0.92) and molecular docking identify superior retinoid-binding affinity (ΔG = −12.27 kcal/mol), while spectral specificity (550–560 nm) and acid-stable photoresponse highlight its adaptability for low-irradiance neuromodulation. These findings position HeAR as a precision optogenetic tool, circumventing spectral overlap with excitatory opsins and enabling sustained hyperpolarization with minimized phototoxicity. By bridging microbial energetics and optobioengineering, this work expands the archaeal rhodopsin toolkit and provides a blueprint for designing wavelength-optimized photoregulatory systems. Full article

In cell culture research and biotechnology, precise pH monitoring is crucial for maintaining cellular health and ensuring reliable experimental outcomes. Traditional pH measurement methods, such as glass electrodes and chemical indicators, are often limited by issues such as fragility, calibration requirements, and potential cytotoxicity. This study presents a novel pH sensor based on bacteriorhodopsin (bR), a light-sensitive protein that undergoes conformational changes in response to pH fluctuations, generating a measurable photoelectric signal. The integrated bR-based electrochemical electrode in a flexible pH biosensor is demonstrated, with measurements spanning the physiological pH range of 6.0–8.5. The sensor shows a high correlation (R² = 0.977) between photo-generated current signals and pH, indicating robust performance for real-time, non-invasive pH monitoring. The biocompatibility and non-invasive nature of this sensor make it particularly suitable for continuous monitoring in cell culture environments. The sensor’s practical application is validated by its integration into cell well plates for tracking the pH changes during cell growth, providing valuable insights into metabolic processes and growth conditions. In the future, efforts will focus on enhancing sensor sensitivity, stability, and integration with multi-parameter monitoring systems for more comprehensive cell culture analysis. Full article

The operation of bacteriorhodopsin (BR) from the archaeon Halobacterium salinarum is based on the photochromic reaction of isomerization of the chromophore group (the retinal protonated Schiff base, RPSB) from the all-trans to the 13-cis form. The ultrafast dynamics of the reverse 13-cis → all-trans photoreaction was studied using femtosecond transient absorption spectroscopy in comparison with the forward photoreaction. The forward photoreaction was initiated by photoexcitation of BR by pulse I (540 nm). The reverse photoreaction was initiated by photoexcitation of the product K₅₉₀ at an early stage of its formation (5 ps) by pulse II (660 nm). The conversion of the excited K₅₉₀ to the ground state proceeds at times of 0.19, 1.1, and 16 ps with the relative contributions of ~20/60/20, respectively. All these decay channels lead to the formation of the initial state of BR as a product with a quantum yield of ~1. This state is preceded by vibrationally excited intermediates, the relaxation of which occurs in the 16 ps time range. Likely, the heterogeneity of the excited state of K₅₉₀ is determined by the heterogeneity of its chromophore center. The forward photoreaction includes two components—0.52 and 3.5 ps, with the relative contributions of 91/9, respectively. The reverse photoreaction initiated from K₅₉₀ proceeds more efficiently in the conical intersection (CI) region but on the whole at a lower rate compared to the forward photoreaction, due to significant heterogeneity of the potential energy surface. Full article

We have previously demonstrated the potential of gelatin films as a memory device, offering a novel approach for writing, reading, and erasing through the manipulation of gelatin structure and bound water content. Here, we discovered that incorporating a bacteriorhodopsin (BR)–lipid membrane into the gelatin devices can further increase the electron conductivity of the polypeptide-bound water network and the ON/OFF ratio of the device by two folds. Our photocurrent measurements show that the BR incorporated in the membrane sandwiched in a gelatin device can generate a net proton flow from the counter side to the deposited side of the membrane. This leads to the establishment of non-electroneutrality on the gelatin films adjacent to the BR-incorporated membrane. Our Raman spectroscopy results show that BR proton pumping in the ON state gelatin device increases the bound water presence and promotes polypeptide unwinding compared to devices without BR. These findings suggest that the non-electroneutrality induced by BR proton pumping can increase the extent of polypeptide unwinding within the gelatin matrix, consequently trapping more bound water within the gelatin-bound water network. The resulting rise in hydrogen bonds could expand electron transfer routes, thereby enhancing the electron conductivity of the memory device in the ON state. Full article

Single-molecule force spectroscopy methods, such as AFM and magnetic tweezers, have proved extremely beneficial in elucidating folding pathways for soluble and membrane proteins. To identify factors that determine the force rupture levels in force-induced membrane protein unfolding, we applied our near-atomic-level Upside molecular dynamics package to study the vertical and lateral pulling of bacteriorhodopsin (bR) and GlpG, respectively. With our algorithm, we were able to selectively alter the magnitudes of individual interaction terms and identify that, for vertical pulling, hydrogen bond strength had the strongest effect, whereas other non-bonded protein and membrane–protein interactions had only moderate influences, except for the extraction of the last helix where the membrane–protein interactions had a stronger influence. The up–down topology of the transmembrane helices caused helices to be pulled out as pairs. The rate-limiting rupture event often was the loss of H-bonds and the ejection of the first helix, which then propagated tension to the second helix, which rapidly exited the bilayer. The pulling of the charged linkers across the membrane had minimal influence, as did changing the bilayer thickness. For the lateral pulling of GlpG, the rate-limiting rupture corresponded to the separation of the helices within the membrane, with the H-bonds generally being broken only afterward. Beyond providing a detailed picture of the rupture events, our study emphasizes that the pulling mode greatly affects the factors that determine the forces needed to unfold a membrane protein. Full article

The use of photosensitive proteins has become a competitive solar energy solution, owing to its pollution-free nature, high conversion efficiency, and good biocompatibility. Bacteriorhodopsin (bR) is an important light-sensitive protein that is widely used in the fabrication of photoelectronic devices. However, research on the optimization and comparison of the immobilization techniques is lacking. In this study, in order to obtain bR films with a high energy conversion efficiency, three immobilization techniques, namely dropcasting, electrophoretic sedimentation, and Langmuir–Blodgett deposition, were used to fabricate films, and their topographical and photoelectrical characteristics were compared. All three immobilization techniques can transfer bR molecules to substrates, forming functional photosensitive bR films. The absorption of the bR films at 568 nm reached the highest value of 0.3 under the EPS technique. The peak photocurrent for the EPS technique reached 5.03 nA. In addition, the EPS technique has the highest efficiency factor of 13.46, indicating that it can generate the highest value of photocurrent under the same light conditions, owing to the improved orientation, and no significant decrease in the peak photocurrent was observed after three weeks, which indicates the stability of the photoelectric response. These results indicate that the EPS technique has a great potential for the photoelectrical device fabrication and solar-energy conversion. Full article

S-TGA-1 and PGP-Me are native archaeal lipids associated with the bacteriorhodopsin (bR) trimer and contribute to protein stabilization and native dynamics for proton transfer. However, little is known about the underlying molecular mechanism of how these lipids regulate bR trimerization and efficient photocycling. Here, we explored the specific binding of S-TGA-1 and PGP-Me with the bR trimer and elucidated how specific interactions modulate the bR trimeric structure and proton release and uptake using long-term atomistic molecular dynamic simulations. Our results showed that S-TGA-1 and PGP-Me are essential for stabilizing the bR trimer and maintaining the coherent conformational dynamics necessary for proton transfer. The specific binding of S-TGA-1 with W80 and K129 regulates proton release on the extracellular surface by forming a “Glu-shared” model. The interaction of PGP-Me with K40 ensures proton uptake by accommodating the conformation of the helices to recruit enough water molecules on the cytoplasmic side. The present study results could fill in the theoretical gaps of studies on the functional role of archaeal lipids and could provide a reference for other membrane proteins containing similar archaeal lipids. Full article

In nature, solar energy is captured by different types of light harvesting protein–pigment complexes. Two of these photoactivatable proteins are bacteriorhodopsin (bR), which utilizes a retinal moiety to function as a proton pump, and photosystem I (PSI), which uses a chlorophyll antenna to catalyze unidirectional electron transfer. Both PSI and bR are well characterized biochemically and have been integrated into solar photovoltaic (PV) devices built from sustainable materials. Both PSI and bR are some of the best performing photosensitizers in the bio-sensitized PV field, yet relatively little attention has been devoted to the development of more sustainable, biocompatible alternative counter electrodes and electrolytes for bio-sensitized solar cells. Careful selection of the electrolyte and counter electrode components is critical to designing bio-sensitized solar cells with more sustainable materials and improved device performance. This work explores the use of poly (3,4-ethylenedioxythiophene) (PEDOT) modified with multi-walled carbon nanotubes (PEDOT/CNT) as counter electrodes and aqueous-soluble bipyridine cobalt^II/III complexes as direct redox mediators for both PSI and bR devices. We report a unique counter electrode and redox mediator system that can perform remarkably well for both bio-photosensitizers that have independently evolved over millions of years. The compatibility of disparate proteins with common mediators and counter electrodes may further the improvement of bio-sensitized PV design in a way that is more universally biocompatible for device outputs and longevity. Full article

Bacteriorhodopsin (BR) functions as a light-driven proton pump that transitions between different states during the photocycle, such as all-trans (AT; BR568) and 13-cis, 15-syn (CS; BR548) state and K, L, M₁, M₂, N, and O intermediates. In this study, we used in situ photoirradiation ¹³C solid-state NMR to observe a variety of photo-intermediates and photoreaction pathways in [20-¹³C]retinal-WT-BR and its mutant [20-¹³C, 14-¹³C]retinal-D96N-BR. In WT-BR, the CS state converted to the CS* intermediate under photoirradiation with green light at −20 °C and consequently converted to the AT state in the dark. The AT state converted to the N intermediate under irradiation with green light. In D96N-BR, the CS state was converted to the CS* intermediate at −30 °C and consequently converted to the AT state. Simultaneously, the AT state converted to the M and L intermediates under green light illumination at −30 °C and subsequently converted to the AT state in the dark. The M intermediate was directly excited to the AT state by UV light illumination. We demonstrated that short-lived photo-intermediates could be observed in a stationary state using in situ photoirradiation solid-state NMR spectroscopy for WT-BR and D96N-BR, enabling insight into the light-driven proton pump activity of BR. Full article

Bioelectronics, an emerging discipline formed by the biology and electronic information disciplines, has maintained a state of rapid development since its birth. Amongst the various functional bioelectronics materials, bacteriorhodopsin (bR), with its directional proton pump function and favorable structural stability properties, has drawn wide attention. The main contents of the paper are as follows: Inspired by the capacitive properties of natural protoplast cell membranes, a new bio-capacitor based on bR and artificial nanochannels was constructed. As a point of innovation, microfluidic chips were integrated into our device as an ion transport channel, which made the bio-capacitor more stable. Meanwhile, a single nanopore structure was integrated to improve the accuracy of the device structure. Experiments observed that the size of the nanopore affected the ion transmission rate. Consequently, by making the single nanopore’s size change, the photocurrent duration time (PDT) of bR was effectively regulated. By using this specific phenomenon, the original transient photocurrent was successfully transformed into a square-like wave. Full article

Aromatic residues are highly conserved in microbial photoreceptors and play crucial roles in the dynamic regulation of receptor functions. However, little is known about the dynamic mechanism of the functional role of those highly conserved aromatic residues during the receptor photocycle. Tyrosine 185 (Y185) is a highly conserved aromatic residue within the retinal binding pocket of bacteriorhodopsin (bR). In this study, we explored the molecular mechanism of the dynamic coupling of Y185 with the bR photocycle by automated fragmentation quantum mechanics/molecular mechanics (AF-QM/MM) calculations and molecular dynamic (MD) simulations based on chemical shifts obtained by 2D solid-state NMR correlation experiments. We observed that Y185 plays a significant role in regulating the retinal cis–trans thermal equilibrium, stabilizing the pentagonal H-bond network, participating in the orientation switch of Schiff Base (SB) nitrogen, and opening the F42 gate by interacting with the retinal and several key residues along the proton translocation channel. Our findings provide a detailed molecular mechanism of the dynamic couplings of Y185 and the bR photocycle from a structural perspective. The method used in this paper may be applied to the study of other microbial photoreceptors. Full article

Bacteriorhodopsin (bR) is a photoactive protein that has gained increasing importance as a tool for optical memory storage due to its remarkable photochemical and thermal stability. The two stable photostates (bR and Q) obtained during the bR photocycle are appropriate to designate the binary bit 0 and 1, respectively. Such devices, however, have limited success due to a low quantum yield of the Q state. Many studies have used genetic and chemical modification as optimization strategies to increase the yield of the Q state. Nonetheless, this compromises the overall photochemical stability of bR. This paper introduces a unique way of stabilizing the conformations of bacteriorhodopsin and, thereby, the bR and Q photostates through adsorption onto graphene. All-atom molecular dynamics (MD) simulations with NAMD and CHARMM force fields have been used here to understand the interactive events at the interface of the retinal chromophore within bR and a single-layer graphene sheet. Based on the stable RMSD (~4.5 Å), secondary structure, interactive van der Waals energies (~3000 kcal/mol) and electrostatic energies (~2000 kcal/mol), it is found that the adsorption of bR onto graphene can stabilize its photochemical behavior. Furthermore, the optimal adsorption distance for bR is found to be ~4.25 Å from the surface of graphene, which is regulated by a number of interfacial water molecules and their hydrogen bonds. The conformations of the key amino acids around the retinal chromophore that are responsible for the proton transport are also found to be dependent on the adsorption of bR onto graphene. The quantity and lifetime of the salt bridges also indicate that more salt bridges were formed in the absence of graphene, whereas more were broken in the presence of it due to conformational changes. Finally, the analysis on the retinal dihedrals (C11 = C12-C13 = C14, C12-C13 = C14-C15, C13 = C14-C15 = NZ and C14-C15 = NZ-CE) show that bacteriorhodopsin in the presence of graphene exhibits increased stability and larger dihedral energy values. Full article

The light-driven proton pump bacteriorhodopsin (BR) from the extreme halophilic archaeon Halobacterium salinarum is a retinal-binding protein, which forms highly ordered and thermally stable 2D crystals in native membranes (termed purple membranes). BR and purple membranes (PMs) have been and are still being intensively studied by numerous researchers from different scientific disciplines. Furthermore, PMs are being successfully used in new, emerging technologies such as bioelectronics and bionanotechnology. Most published studies used the wild-type form of BR, because of the intrinsic difficulty to produce genetically modified versions in purple membranes homologously. However, modification and engineering is crucial for studies in basic research and, in particular, to tailor BR for specific applications in applied sciences. We present an extensive and detailed protocol ranging from the genetic modification and cultivation of H. salinarum to the isolation, and biochemical, biophysical and functional characterization of BR and purple membranes. Pitfalls and problems of the homologous expression of BR versions in H. salinarum are discussed and possible solutions presented. The protocol is intended to facilitate the access to genetically modified BR versions for researchers of different scientific disciplines, thus increasing the application of this versatile biomaterial. Full article