Search Results (13)

Dynamic post-buckling behavior of microscale cylindrical shells reinforced with functionally graded carbon nanotubes (FG-CNTs) and conveying microfluid is discussed for the first time. The microshell is embedded in a Kerr foundation and subjected to an axial compressive load and a two-dimensional magnetic field effect. CNTs dispersion across the shell thickness follows a power law, with five distribution types developed. The modified couple stress theory is applied to incorporate the small-size effect using a single material parameter. Furthermore, the Knudsen number is used to address the small-size effect on the microfluid. The external force between the magnetic fluid and microshell is modeled by applying the Navier–Stokes equation depending on the fluid velocity. Nonlinear motion equations of the present model are derived using Hamilton’s principle, containing the Lorentz magnetic force. According to the Galerkin method, the equations of motion are transformed into an algebraic system to be solved, determining the post-buckling paths. Numerical results indicate that the presence of the magnetic field, CNT reinforcement, and fluid flow improves the load-bearing performance of the cylindrical microshells. Also, many new parametric effects on the post-buckling curves of the FG-CNT microshells have been discovered, including the shell geometry, magnetic field direction, length scale parameter, Knudsen number, and CNT distribution types. Full article

Vibration mixing, characterized by the high-frequency vibrations of the mixing shaft, can enhance the mechanical properties of ultra-high-performance concrete (UHPC). However, the effects of vibration mixing on carbon nanotube (CNT)-reinforced UHPC have not been previously reported. To investigate the impact of vibration mixing on the properties of CNT-reinforced UHPC, a comparative study was conducted using different vibration mixing durations and twin-shaft mixing. The results indicate that for CNT-reinforced UHPC, vibration mixing achieves better flowability, higher wet apparent density, and superior mechanical properties in shorter mixing times compared to twin-shaft mixing, making it a more favorable method. Considering vibration mixing times ranging from 3 to 7 min, the optimal time was found to be 3 min, during which the axial compressive strength increased by 3.3%, the elastic limit tensile strength and tensile strength improved by 14.6% and 15.8%, respectively, and the initial cracking strength and flexural strength increased by 12.6% and 13.4%, respectively, compared to values after 10 min of twin-shaft mixing. Full article

Carbon nanotube (CNT) fibers are renowned for their exceptional axial tensile strength and modulus. However, in yarn form, they frequently encounter transverse loading in practical applications, which exposes their suboptimal mechanical attributes rooted in inadequate inter-tube interactions and yarn surface defects. Efforts to mitigate micro-slippage among CNTs have encompassed gap-filling methodologies with varied materials, yet the outcomes have fallen short of expectations. This work aimed to enhance the mechanical properties of CNT yarns via infiltration with polyacrylonitrile (PAN) under supercritical carbon dioxide (sc-CO₂) conditions. PAN was strategically chosen for its capability to undergo pre-oxidation and subsequent carbonization, leading to robust graphitic reinforcement. Leveraging sc-CO₂’s swelling and high permeability properties, the infiltration process effectively plugged interstitial spaces, elevating the yarn’s tensile strength to 277.50 MPa and Young’s modulus to 5094.05 MPa. Additional enhancements were realized after pre-oxidation, conferring a dense, reinforced shell structure that augmented tensile strength by 96.93% and Young’s modulus by 298.80%. Scanning electron microscopy (SEM) analyses revealed a homogeneous PAN distribution within the yarn matrix, corroborated by X-ray photoelectron spectroscopy (XPS) evidence of C-N bonding, indicative of a successfully interlaced network. Consequently, this investigation introduces a novel strategy to tackle micro-slippage in CNT yarns, thereby achieving substantial improvements in their mechanical resilience. Full article

The incorporation of carbon nanotubes (CNTs) can enhance the mechanical properties of concrete. The stress–strain curves of CNT-reinforced concrete under uniaxial compression are investigated through an experimental program with different CNT and steel fiber proportions considered. The test results demonstrate that CNTs can increase both peak stress and peak strain, and steel fibers can further enhance the effect of CNTs. Additionally, steel fibers can effectively enhance both the strength and ductility. Theoretical models for the peak strain, initial elastic modulus, toughness index and relative absorbed energy are established. A theoretical model for the uniaxial compressive constitutive relationship of CNT-reinforced concrete considering CNT and steel fiber content is developed. Finite element (FE) modelling is developed to simulate the axial compression behavior of CNT-reinforced concrete. Full article

The mathematical modeling of the stability problem of nanocomposite cylindrical shells is one of the applications of partial differential equations (PDEs). In this study, the stability behavior of inhomogeneous nanocomposite cylindrical shells (INH-NCCSs), under combined axial compression and hydrostatic pressure in the thermal environment, is investigated by means of the first-order shear deformation theory (FSDT). The nanocomposite material is modeled as homogeneous and heterogeneous and is based on a carbon nanotube (CNT)-reinforced polymer with the linear variation of the mechanical properties throughout the thickness. In the heterogeneous case, the mechanical properties are modeled as the linear function of the thickness coordinate. The basic equations are derived as partial differential equations and solved in a closed form, using the Galerkin procedure, to determine the critical combined loads for the selected structure in thermal environments. To test the reliability of the proposed formulation, comparisons with the results obtained by finite element and numerical methods in the literature are accompanied by a systematic study aimed at testing the sensitivity of the design response to the loading parameters, CNT models, and thermal environment. Full article

Composite materials are gaining increasing attention from researchers worldwide due to their ability to offer tailored properties for various technical challenges. One of these promising fields is metal matrix composites, including carbon-reinforced metals and alloys. These materials allow for the reduction of density while simultaneously enhancing their functional properties. This study is focused on the Pt-CNT composite, its mechanical characteristics, and structural features under uniaxial deformation depending on temperature and mass fractions of carbon nanotube (CNT). The mechanical behavior of platinum reinforced with carbon nanotubes of diameters varying in the interval 6.62–16.55 Å under uniaxial tension and compression deformation has been studied by the molecular dynamics method. Simulations for tensile and compression deformations have been done for all specimens at different temperatures (viz. 300 K, 500 K, 700 K, 900 K, 1100 K, and 1500 K). The calculated mechanical characteristics allow us to conclude that, compared to pure platinum, the Young’s modulus increased by about 60%. The results indicate that yield and tensile strength values decreases with increase in temperature for all simulation blocks. This increase was due to the inherent high axial rigidity of CNTs. In this work, these characteristics are calculated for the first time for Pt-CNT. It can be concluded that CNTs can be an effective reinforcing material for composites based on a metal matrix under tensile strain. Full article

Three multifunctional smart composites for next-generation applications have been studied differently through versatile nanoindentation investigation techniques. They are used in order to determine peculiarities and specific properties for the different composites and to study the charge/matrix, charge/surface, or smart functions interactions. At first, a mapping indentation test was used to check the distribution of hardness and modulus across a large region to examine any non-uniformity due to structural anomalies or changes in properties for a carbon nanotubes (CNTs)-reinforced polypropylene (PP V-2) nanocomposite. This smart composite is suitable to be used in axial impeller fans and the results can be used to improve the process of the composite produced by injection moulding. Secondly, the interfacial properties of the carbon fibre (CF) and the resin were evaluated by a push-out method utilizing the smaller indentation tip to target the individual CF and apply load to measure its displacement under loads. This is useful to evaluate the effectiveness of the surface modification on the CFs, such as sizing. Finally, nanoindentation at different temperatures was used for the probing of the in situ response of smart shape memory polymer composite (SMPC) usable in grabbing devices for aerospace applications. Furthermore, the triggering temperature of the shape memory polymer response can be determined by observing the change of indentations after the heating and cooling cycles. Full article

This work deals with the wave propagation analysis in functionally graded carbon nanotubes (CNTs)-reinforced composite beams lying on an elastic medium. Despite the large amount of experimental and theoretical studies in the literature on the mechanical behavior of composite structures strengthened with CNTs, limited attention has been paid to the effect of an axial graduation of the reinforcing phase on the mechanical response of CNTs-reinforced composite beams. In this paper, CNT fibers are graded across the beam length, according to a power-law function, which expresses a general variation from a linear to parabolic pattern. An Euler-Bernoulli beam theory is considered herein to model the CNTs-reinforced composite structure resting on a Winkler–Pasternak foundation, whose governing equations are derived from the Hamiltonian principle. The theoretical solution of the problem checks for the sensitivity of the mechanical response to different parameters, i.e., the wave number, power index, Winkler and Pasternak coefficients, that could serve for further computational/experimental studies on the same problem, even from a design standpoint. Full article

The present paper investigates the axial and shear buckling analysis of a carbon nanotube (CNT)-reinforced multiscale functionally graded material (FGM) plate. Modified third-order deformation theory (MTSDT) with transverse displacement variation is used. CNT materials are assumed to be uniformly distributed, and ceramic fibers are graded according to a power-law distribution of the volume fraction of the constituents. The effective material properties are obtained using the Halpin–Tsai equation and Voigt rule of the mixture approach. A MATLAB code is developed using nine noded iso-parametric elements containing 13 nodal unknowns at each node. The shear correction factor is eliminated in the present model, and top and bottom transverse shear stresses are imposed null to derive higher-order unknowns. Comparisons of the present results with those available in the literature confirm the accuracy of the existing model. The effects of material components, plate sizes, loading types, and boundary conditions on the critical buckling load are investigated. For the first time, the critical buckling loads of CNT-reinforced multiscale FGM rectangular plates with diverse boundary conditions are given, and they can be used as future references. Full article

Because of the dilemma that the current industrial Cu enhancement methods lead to a significant decline in conductivity and ductility, Cu matrix composites reinforced by oriented multi-walled carbon nanotubes (MWCNTs) were prepared through sintering, hot extrusion, and cold drawing. Before sintering, Ni, Cu, and Ni&Cu coatings were electroless plated on MWCNTs as the intermediate transition layer, and then they were mixed with Cu powder through a nitrogen bubbling assisted ultrasonic process. By analyzing the composition, microstructure, and formation mechanism of the interface between MWCNTs and the matrix, the influence and mechanism of the interface on the mechanical properties, conductivity, and ductility of the composites were explored. The results indicated that MWCNTs maintained a highly dispersed and highly consistent orientation in the Cu matrix. The coating on Ni@CNT was the densest, continuous, and complete. The Ni@CNTs/Cu composite had the greatest effect, while the Cu composite reinforced by MWCNT without coating had the smallest reduction in elongation and conductivity. The comprehensive performance of the Cu@CNTs/Cu composite was the most balanced, with an ultimate tensile strength that reached 373 MPa, while the ductility and conductivity were not excessively reduced. The axial electrical and thermal conductivity were 79.9 IACS % (International Annealed Copper Standard) and 376 W/mK, respectively. Full article

Composite materials are frequently used in the construction of rail, tunnels, and pipelines as well as in the construction of aircraft, ships, and chemical pipelines. When such structural elements are formed from new-generation composites, such as CNT-reinforced composites, and their interaction with the ground, there is a need to renew the dynamic response calculations under moving pressures and to create new mathematical solution methods during their design. The aim of this study was to analyze the influences of elastic foundations (EFs) and material gradient on the dynamic response of infinitely long carbon nanotube (CNT)-based polymer pipes under combined static and moving pressures. The CNT-based polymer pipes resting on the EFs were exposed to the axial and moving pressures. The uniform and heterogeneous reinforcement distributions of CNTs, which varied linearly throughout the thickness of polymer pipes, were considered. After setting the problem, the fundamental equations derived to find new analytical expressions for dynamic coefficients and critical velocity, which are dynamic characteristics of cylindrical pipes reinforced by the uniform and linear distributions of CNTs, were solved in the framework of the vibration theory. Finally, numerical computations were performed to examine the effects of EFs on the critical parameters depending on the characteristics of the pipes, the speed of moving pressures, the shape of the distribution of CNTs, and the change in volume fractions. Full article

By using the advantages of carbon nanotubes (CNTs), such as their excellent mechanical properties and low density, CNT-reinforced metal matrix composites (MMCs) are expected to overcome the limitations of conventional metal materials, i.e., their high density and low ductility. To understand the behavior of composite materials, it is necessary to observe the behavior at the molecular level and to understand the effect of various factors, such as the radius and content of CNTs. Therefore, in this study, the effect of the CNT radius and content on the mechanical properties of CNT-Al composites was observed using a series of molecular dynamics simulations, particularly focusing on MMCs with a high CNT content and large CNT diameter. The mechanical properties, such as the strength and stiffness, were increased with an increasing CNT radius. As the CNT content increased, the strength and stiffness increased; however, the fracture strain was not affected. The behavior of double-walled carbon nanotubes (DWNTs) and single-walled carbon nanotubes (SWNTs) was compared through the decomposition of the stress–strain curve and observations of the atomic stress field. The fracture strain increased significantly for SWNT-Al as the tensile force was applied in the axial direction of the armchair CNTs. In the case of DWNTs, an early failure was initiated at the inner CNTs. In addition, the change in the elastic modulus according to the CNT content was predicted using the modified rule of mixture. This study is expected to be useful for the design and development of high-performance MMCs reinforced by CNTs. Full article

The buckling behavior of functionally graded carbon nanotube reinforced composite conical shells (FG-CNTRC-CSs) is here investigated by means of the first order shear deformation theory (FSDT), under a combined axial/lateral or axial/hydrostatic loading condition. Two types of CNTRC-CSs are considered herein, namely, a uniform distribution or a functionally graded (FG) distribution of reinforcement, with a linear variation of the mechanical properties throughout the thickness. The basic equations of the problem are here derived and solved in a closed form, using the Galerkin procedure, to determine the critical combined loading for the selected structure. First, we check for the reliability of the proposed formulation and the accuracy of results with respect to the available literature. It follows a systematic investigation aimed at checking the sensitivity of the structural response to the geometry, the proportional loading parameter, the type of distribution, and volume fraction of CNTs. Full article