Search Results (10)

To address the current demands for antenna miniaturization, ultra-bandwidth, and circular polarization in advanced medical devices, a novel ISM band implantable antenna for blood glucose monitoring has been developed. This antenna achieves miniaturization by incorporating slots in the radiation patch and adding symmetric short-circuit probes, resulting in a compact size of only 0.054λ₀ × 0.054λ₀ × 0.005λ₀ (λ₀ is the wavelength in free space in respect of the lowest working frequency). By combining two resonance points and utilizing a differential feed structure, the antenna achieves ultra-broadband and circular polarization. Simulations indicate a |S₁₁| bandwidth of 1.1 GHz (1.65–2.75 GHz) and an effective axial ratio (based on 3 dB axis ratio) bandwidth of 590 MHz (1.89–2.48 GHz), able to cover both the ISM frequency band (2.45 GHz) and the mid-field frequency band (1.9 GHz). The antenna exhibits CP gains of −20.04 dBi at a frequency of 2.45 GHz, while it shows gains of −24.64 dBi at 1.9 GHz. Furthermore, a superstrate layer on the antenna’s radiating surface enhances its biocompatibility and minimizes its impact on the human body. Simulation and experimental results indicate that the antenna can establish a stable wireless communication link for implantable continuous blood glucose monitoring systems. Full article

Flowers are plant structures characteristic of the phylum Angiosperms composed of organs thought to have emerged from homologous structures to leaves in order to specialize in a distinctive function: reproduction. Symmetric shapes, colours, and scents all play important functional roles in flower biology. The evolution of flower symmetry and the morphology of individual flower parts (sepals, petals, stamens, and carpels) has significantly contributed to the diversity of reproductive strategies across flowering plant species. This diversity facilitates attractiveness for pollination, protection of gametes, efficient fertilization, and seed production. Symmetry, the establishment of body axes, and fate determination are tightly linked. The complex genetic networks underlying the establishment of organ, tissue, and cellular identity, as well as the growth regulators acting across the body axes, are steadily being elucidated in the field. In this review, we summarise the wealth of research already at our fingertips to begin weaving together how separate processes involved in specifying organ identity within the flower may interact, providing a functional perspective on how identity determination and axial regulation may be coordinated to inform symmetrical floral organ structures. Full article

Sounding rockets constitute a class of rocket with a generally simple layout, being composed of a cylindrical center-body, a nosecone, a number of fins placed symmetrically around the longitudinal axis (usually three or four), and possibly a boat-tail. This type of flying craft is typically not actively controlled; instead, a passive stabilization effect is obtained through suitable positioning and sizing of the fins. Therefore, in the context of dynamic performance analysis, the margin of static stability is an index of primary interest. However, the classical approach to static stability analysis, which consists in splitting computations in two decoupled domains, namely, around the pitch and yaw axis, provides a very limited insight to the missile performance for this type of vehicle due to the violation of the classical assumptions of planar symmetry and symmetric flight conditions commonly adopted for winged aircraft. To tackle this issue, this paper introduces a method for analyzing static stability through a novel index, capable of more generally assessing the level of static stability for sounding rockets, exploiting the same information on aerodynamic coefficients typically required for more usual (i.e., decoupled) static stability analyses, and suggests a way to assess the validity and shortcoming of the method in each case at hand. Full article

The theory of open quantum systems is applied to study galvano-, thermo-magnetic, and magnetization phenomena in axial symmetric two-dimensional systems. Charge carriers are considered as quantum particles interacting with the environment through a one-body (mean-field) mechanism. The dynamics of charge carriers is affected by the average collision time that takes effectively into account two-body effects. The functional dependencies of the average collision time on the external uniform magnetic field, concentration and temperature are phenomenologically treated. Analytical expressions are obtained for the tensors of electric and thermal conductivity and/or resistivity. The developed theory is applied to describe the Shubnikov-de Haas oscillations and quantum Hall effect in graphene and GaAs/Al${}_x$Ga${}_{1-x}$As heterostructure. The dependencies of magnetization and thermal conductivity on the magnetic field are also predicted. Full article

Subjects with bicuspid aortic valves (BAV) are at risk of developing valve dysfunction and need regular clinical imaging surveillance. Management of BAV involves manual and time-consuming segmentation of the aorta for assessing left ventricular function, jet velocity, gradient, shear stress, and valve area with aortic valve stenosis. This paper aims to employ machine learning-based (ML) segmentation as a potential for improved BAV assessment and reducing manual bias. The focus is on quantifying the relationship between valve morphology and vortical structures, and analyzing how valve morphology influences the aorta’s susceptibility to shear stress that may lead to valve incompetence. The ML-based segmentation that is employed is trained on whole-body Computed Tomography (CT). Magnetic Resonance Imaging (MRI) is acquired from six subjects, three with tricuspid aortic valves (TAV) and three functionally BAV, with right–left leaflet fusion. These are used for segmentation of the cardiovascular system and delineation of four-dimensional phase-contrast magnetic resonance imaging (4D-PCMRI) for quantification of vortical structures and wall shear stress. The ML-based segmentation model exhibits a high Dice score (0.86) for the heart organ, indicating a robust segmentation. However, the Dice score for the thoracic aorta is comparatively poor (0.72). It is found that wall shear stress is predominantly symmetric in TAVs. BAVs exhibit highly asymmetric wall shear stress, with the region opposite the fused coronary leaflets experiencing elevated tangential wall shear stress. This is due to the higher tangential velocity explained by helical flow, proximally of the sinutubal junction of the ascending aorta. ML-based segmentation not only reduces the runtime of assessing the hemodynamic effectiveness, but also identifies the significance of the tangential wall shear stress in addition to the axial wall shear stress that may lead to the progression of valve incompetence in BAVs, which could guide potential adjustments in surgical interventions. Full article

To study the shear deformation and failure characteristics of a wellbore and the interaction mechanism with its surrounding rocks induced by a layer slip during natural gas hydrates (NGHs) extraction, this paper conducted a numerical simulation study of wellbore shear induced by a layer slip using ABAQUS software and carried out a laboratory experiment of wellbore shear to verify the accuracy of the numerical model. The results show that the shear force–displacement curves obtained from the laboratory experiments and numerical simulations are consistent with five stages, including the compaction stage, linear stage, plastic stage, strain-softening stage and residual stage. The wellbore shows a “Z”-shaped deformation characteristic after its shear breakage. The shear force of the wellbore is maximum at the shear surface, and it is distributed in an approximate “M” shape along the shear surface. The axial force of the wellbore is small and uniformly distributed in the initial stage of the shear. The wellbore bending moment is minimum at the shear surface, with a value of 0, and it is distributed in a skew–symmetric wave shape along the shear surface. During the shearing, the evolution of the wellbore axial force and shear force can be classified into the distribution pattern along the radial direction on the shear surface and the pattern along the axial direction. The combination of the wellbore axial force and shear force causes the tensile–shear compound failure of the wellbore. During shearing, the wellbore and rock body gradually enter the plastic state with the increase in the shear displacement. When the entire cross-section of the wellbore is in the plastic state, a “necking” phenomenon of the wellbore begins to appear. During the shearing, the frictional dissipation energy and plastic dissipation energy increase constantly. In addition, the elastic strain energy increases to a peak and then decreases to a certain value, which remains unchanged along with the work conducted by the shear force. Full article

Knowledge of vertical motion patterns of the axial body segments is a prerequisite for the development of algorithms used in automated detection of lameness. To date, the focus has been on the trot. This study investigates the temporal synchronization between vertical motion of the axial body segments with limb kinematic events in walk and trot across three popular types of sport horses (19 Warmbloods, 23 Iberians, 26 Icelandics) that are known to have different stride kinematics, and it presents novel data describing vertical motion of the axial body segments in tölting and pacing Icelandic horses. Inertial measurement unit sensors recorded limb kinematics, vertical motion of the axial body at all symmetrical gaits that the horse could perform (walk, trot, tölt, pace). Limb kinematics, vertical range of motion and lowest/highest positions of the head, withers and pelvis were calculated. For all gaits except walk and pace, lowest/highest positions of the pelvis and withers were found to be closely related temporally to midstance and start of suspension of the hind/fore quarter, respectively. There were differences in pelvic/withers range of motion between all breeds where the Icelandic horses showed the smallest motion, which may explain why lameness evaluation in this breed is challenging. Full article

The paper presents two methods to improve the efficiency of supersonic flow simulation using arbitrarily shaped unstructured grids. The first method promotes increasing the numerical solution convergence rate and is based on the geometric multigrid method for initialization of the flow field. The method is used to obtain the initial field of distributed physical quantity values, which maximally corresponds to the converged solution. For this purpose, the problem simulation is performed on a series of coarse grids beginning from the coarsest one in this series. Upon completion of simulations, the solution obtained is interpolated to a finer grid and used for initialization of simulations on this grid. The second method allows increasing the numerical solution accuracy and is based on statically adapting the computational grid to the flow specifics. The static adaptation algorithm provides automatic refinement of the computational grid in the region of specific features of flow, such as shock waves typical for supersonic flows. This algorithm provides a better description of the shock-wave front owing to the local grid refinement, with the local refinement region being automatically selected. Results of using these methods are demonstrated for the two supersonic aerodynamics problems: the simulation of the bow shock strength at a given distance under axially symmetric body Seeb-ALR and a mock-up aircraft Lockheed Martin 1021. It is shown that in both cases, the numerical solution convergence rate is increased owing to the use of the geometric multigrid method for initialization and a higher quality and a higher accuracy of solution is gained owing to the local grid refinement (using static adaptation means) near the shock-wave front. Full article

The underground silo was constructed as a facility for the disposal of low- and intermediate-level radioactive waste. It is divided into three parts: the upper-dome core, the lower-dome core, and the cylindrical-space core. Numerical parametric studies on the stress distribution occurring in the surrounding rocks around the underground silo are presented in this paper. It is assumed that the soil layer was distributed to a depth of −4.3 m from the ground level, the weathered rocks were distributed to a depth of −9.5 m from the bottom of the soil layer, and the rocks were distributed in the lower part of the weathered rocks. A 2D axial symmetric finite element model was considered for the numerical analysis of the underground silo. A 3D finite element model was used to verify the reliability of the 2D axial symmetric model. Finite element analysis was carried out under various ratios of in situ horizontal stress to vertical stress (Ko). The numerical results obtained through these analyses include detailed stress states in the p–q and octahedral planes at key locations of finite element models around an underground silo. Contours of safety factor distributions are also presented to evaluate the overall structural safety of the surrounding rock mass, which is the main supporting body of the underground silo. Full article

Turning maneuvers by aquatic animals are essential for fundamental life functions such as finding food or mates while avoiding predation. However, turning requires resolution of a fundamental dilemma based in rotational mechanics: the force powering a turn (torque) is favored by an expanded body configuration that maximizes lever arm length, yet minimizing the resistance to a turn (the moment of inertia) is favored by a contracted body configuration. How do animals balance these opposing demands? Here, we directly measure instantaneous forces along the bodies of two animal models—the radially symmetric Aurelia aurita jellyfish, and the bilaterally symmetric Danio rerio zebrafish—to evaluate their turning dynamics. Both began turns with a small, rapid shift in body kinematics that preceded major axial rotation. Although small in absolute magnitude, the high fluid accelerations achieved by these initial motions generated powerful pressure gradients that maximized torque at the start of a turn. This pattern allows these animals to initially maximize torque production before major body curvature changes. Both animals then subsequently minimized the moment of inertia, and hence resistance to axial rotation, by body bending. This sequential solution provides insight into the advantages of re-arranging mass by bending during routine swimming turns. Full article