Search Results (94)

Background/Objectives: This study aims to uncover the variables related to the success of the intervention. Methods: A retrospective study was conducted on patients who underwent joint replacement surgery utilizing a customized alloplastic system between 2018 and 2023, comprising subjects with complete records for both the planning and follow-up phases. The Student’s t-test was applied with a significance threshold of p < 0.05. Results: Forty-eight subjects were admitted for initial analysis, and 31 subjects were evaluated with a minimum follow-up of 1 year and a maximum of 7 years, with a mean age of 36.37 ± 15.53. The TMJ diagnosis was mainly with degenerative TMJ disease, followed by ankylosis and craniofacial syndromes, and an average of 2.1 ± 1.2 previous surgeries were noted. Degenerative joint disease correlated with increased pain (p < 0.0001) and a higher prevalence of prior joint surgery (p < 0.0001). Thirty-one subjects were followed up with 47 prostheses installed; 74.4% underwent complementary surgery with other facial osteotomies. Significant improvements (p < 0.0001) were observed when comparing pain levels pre- and postoperatively, with a decrease from 5.5 (±2.3) to 2.2 (±0.4). Concerning the interincisal opening, there was a significant increase (p < 0001) from 25.85 (±10.2) mm to 35.93 (±4.2) mm in mouth opening. TMJ replacement treatment is efficient and effective, demonstrating stability in follow-up assessments for up to 7 years. Conclusions: The indications for replacement are diverse and may benefit patients who have not yet progressed to end-stage TMJ disease. Full article

Background/Objectives: Temporomandibular joint (TMJ) ankylosis, characterized by osseous–fibrous fusion, severely impairs mandibular function. While alloplastic total joint replacement (TJR) is the gold standard, long-term outcomes remain understudied. The aim of this study is to evaluate the long-term esthetic and functional outcomes of prosthetic replacement and to retrospectively analyze our 20-year experience. Methods: A retrospective observational study (2003–2024) was conducted at a tertiary referral center in Turin and enrolled patients who underwent alloplastic total joint replacement for TMJ ankylosis. Data collected included demographic variables, etiology, characteristics of the ankylosis, prosthesis type (stock/custom), surgical details, and outcomes (maximal interincisal opening [MIO], pain, quality of life, diet consistency, Helkimo index, complications). Results: Among 28 patients (61% female, mean age 51.8 years), etiologies included post-traumatic (39%), osteoarthritis (32%), congenital (25%) and neoplastic (4%) causes. Custom prostheses were used in 57% of cases. Median follow-up was 11.5 years. Significant improvements were observed in MIO (p = 0.001), pain level (p = 0.001), quality of life (p = 0.001), diet score (p = 0.002), and Helkimo index (p = 0.001). Complications included facial nerve dysfunction (32.1%), salivary leakage (14.3%), and one recurrence (2.2%). Conclusions: Alloplstic TJR provides durable functional and esthetic restoration for TMJ ankylosis, with custom prostheses excelling in complex anatomies. Long-term stability (>10 years) supports its role as a definitive solution. Full article

Background/Objectives: Avulsion is a major cause of tooth loss, and its treatment involves replantation. This study analyzed the repair process of incisive teeth subjected to delayed replantation after topical treatment with ampicillin and tetracycline. Methods: Forty male rats were equally divided into four groups: immediate replantation (IM), ampicillin (AM), tetracycline (TR), and dry medium (SE). In the IM group, replantation was performed 5 min after experimental avulsion, whereas in the SE group, the teeth were kept in a dry medium for 60 min. In the AM and TR groups, the teeth were stored in whole bovine milk for 60 min, and then immersed in their respective ampicillin and tetracycline solutions for 5 min. Euthanasia was performed 60 days after the experimental surgery. Histological slides were stained with Hematoxylin and Eosin for quantitative and qualitative analyses. Results: No statistically significant differences were observed among the IM, AM, and TR groups regarding the total resorption area, reattached periodontal ligament fibers, and ankylosis. However, when compared to the SE group, these groups exhibited a smaller total resorption area (IM: p = 0.005; AM: p = 0.0007; TR: p = 0.03), a larger area of periodontal ligament fibers reattachment (IM: p = 0.0002; AM: p = 0.0002; TR: p = 0.02), and a lower presence of ankylosis (IM: p = 0.005; AM: p = 0.0002; TR: p = 0.03). The AM group exhibited the smallest inflammatory resorption. Conclusions: It is concluded that, in an aseptic environment, the use of topical antibiotics such as ampicillin and tetracycline in the treatment of the root surface during replantation of teeth stored in milk is beneficial to the periodontal repair process and root resorption. Notably, ampicillin demonstrated superior efficacy in mitigating inflammatory root resorption and better periodontal ligament reattachment. Full article

Background: Autogenous tooth transplantation is a valuable option for dental rehabilitation, particularly in young patients. Template-guided approaches, using 3D-printed replicas of donor teeth, have recently emerged as a method to increase precision and reduce extraoral time—two critical factors in maintaining periodontal ligament (PDL) vitality, which is essential to improve long-term outcomes. Methods: This report presents the case of a 12-year-old patient who underwent autotransplantation of tooth 18 to the site of tooth 75, which exhibited ankylosis. Patients exhibiting unfavorable root anatomy and morphology, systemic conditions, or completed root development were not considered for this technique. A patient-specific donor tooth replica was digitally designed and 3D-printed via CAD/CAM manufacturing to preoperatively shape the recipient site. The transplanted tooth 18 was then inserted with an extraoral time of less than one minute and subsequently stabilized using a flexible titanium trauma splint (TTS). Results: Longitudinal clinical and radiographic follow-up over 12 months confirmed favorable healing without signs of complications. Conclusions: This case illustrates the practical advantages of a fully digital, template-guided workflow in managing anatomically complex cases. Full article

Background/Objectives: Orthodontic camouflage is a treatment strategy designed to address mild to moderate skeletal discrepancies through dental compensation when growth modification or orthognathic surgery (OGS) is unsuitable or declined by the patient. This report highlights the treatment of a child with a skeletal Class II pattern, Class II division 1 malocclusion, a 10.8 mm overjet, traumatic overbite, and unilateral temporomandibular joint (TMJ) ankylosis on the left side. Methods: The treatment plan focused on correcting the proclination of the maxillary incisors and improving the facial profile. A non-extraction camouflage approach using pre-adjusted edgewise appliances was implemented following a gap arthroplasty procedure on the left TMJ. Results: The patient achieved a satisfactory treatment outcome, with an ideal static and functional occlusion and significant improvement in facial esthetics. The approach effectively managed the severe mandibular retrognathia and TMJ ankylosis without OGS, thereby minimizing the risk of progressive condylar resorption. Conclusions: This case underscores the importance of personalized treatment plans tailored to each patient’s dental, skeletal, and individual needs. It demonstrates that non-surgical camouflage treatments can be a viable alternative for addressing severe mandibular retrognathia with TMJ ankylosis, achieving favorable esthetic and functional outcomes. Full article

Background: Trismus, or restricted mouth opening, can present significant challenges in oral and maxillofacial surgery and trigger substantial functional and psychosocial disabilities. Intra-articular causes, such as temporomandibular joint ankylosis and arthritis, are thoroughly described; however, extra-articular pathologies like neoplastic, traumatic, infectious, and fibrotic conditions of adjacent soft and hard tissues are less frequently reported and present distinct diagnostic complexities and therapeutic hurdles. This retrospective study aims to investigate the difficulties encountered in diagnosis and surgical interventions associated with rare extra-articular causes of trismus. Material and Methods: This article describes five rare causes of extra-articular trismus. The cases range from benign pathologies like coronoid hyperplasia and osteomas to more complex diagnoses of myositis ossificans, external auditory canal abscess, and chronic osteomyelitis. A thorough diagnostic workup was performed for each patient, and specific surgical interventions were administered based on their pathology. Results: All five patients showed significant improvements in mouth opening after surgery. Diagnostic accuracy was ensured with advanced imaging modalities and innovative surgical techniques, and adequate postoperative care translated the favorable outcome. Conclusions: Although based on individual case descriptions, this study emphasizes the potential importance of early diagnosis, a multidisciplinary approach, and individualized treatment planning in managing rare extra-articular causes of trismus. These cases suggest a basis for a more organized system for the timely identification and treatment of such conditions. Additional research is needed to improve diagnostic accuracy, optimize surgical management, and develop evidence-based aftercare treatment to improve patient care and quality of life. Full article

Metallic biomaterials are prevalent in medical applications. In the treatment of mandibular fractures, the use of metallic biomaterials makes it possible to recover the ability to bite and partially recover speech through preventing ankylosis of the temporomandibular joints, the formation of pseudoarthritic joints, and the consolidation of reduced bones. This article presents the concept of a triaxial plate for osteosynthesis of basal fractures of the mandibular condyle, which are very common fractures in humans. Approximately half of patients with such fractures have wide (squat) condylar processes, which allows for the use of as many as three straight plates. However, installing three plates is quite troublesome, and the use of a single and transversely reinforced plate would facilitate treatment. This study proposes a plate with three reinforcements running along three divergent axes. The plate is fixed to the bone fragments with 11 screws. This concept for the treatment of basal fractures allows patients to quickly recover their primary system functions due to rigid fixation through the use of short (4 mm) screws, as there is no trauma to the medial pterygoid muscle and the mandible canal contents and no intermaxillary immobilization. Full article

Objective: The aim of this study was to assess and compare the diagnostic accuracy of two MRI techniques for identifying structural bone lesions (fatty lesions [BMFs], subchondral erosions [BMEs], sclerosis [BMS], and ankylosis [A]) in the dorso-lumbar joints. This assessment specifically focused on the application of MRI Dixon sequence fat–water separation techniques (T2w Dixon FSTs) when acquiring T1-weighted (T1w) images as the reference standard, among patients diagnosed with axial spondyloarthritis (SpA). Methods: Conducted at a single center, this study involved the recruitment of patients who underwent both spinal and sacroiliac (SI) joint MRI between 2019 and 2022, with follow-up continuing until 2023. In 2023, three independent readers reassessed the initial MRI datasets to evaluate specific radiological features of SpA. They recorded confidence estimates regarding the use of T2w Dixon FSTs when acquiring T1w images. The centralized MRI interpretations were then compared to established rheumatologic diagnoses. Results: A total of 73 patients (42 men and 31 women) were included in the study. The mean sensitivity, specificity, and accuracy of T2w Dixon FSTs (fat-only images) were at least 75%, 100%, and 96%, respectively, based on the 2023 assessment for all considered items. The diagnostic performance of T2w Dixon FSTs was comparable to that of T1w images. Conclusions: The diagnostic performance of T2w Dixon FSTs (fat-only images) matched that of T1w images not only in assessing structural and fatty lesions, but also in the evaluation of subchondral erosions, sclerosis, and ankylosis in the dorso-lumbar joints of patients with a rheumatologic diagnosis of SpA. These findings suggest the potential avoidance of T1-weighted images when employing multi-parameter, multi-sequence imaging, such as the Dixon sequence. Full article

Temporomandibular joint (TMJ) ankylosis compromises essential functions such as chewing, phonation, and breathing. Surgical treatment aims to restore mandibular mobility and prevent the recurrence of joint fusion. This article describes a technical variation based on Puricelli biconvex arthroplasty, using surgical cement, screw fixation, and 3D-printed cutting guides based on virtual planning, allowing for greater precision in joint reconstruction. In this work, we present the step-by-step process used in the customization of cutting guides, virtual planning, and the production of the interposition material with PMMA associated with fixation with titanium screws as a hybrid method for the treatment of recurrent TMJ ankylosis. This reported technique is demonstrated to be reproducible, low-cost, and effective. Full article

Background/Objectives: Arthroscopy and arthrocentesis are routinely performed for temporomandibular joint (TMJ) disorders, but high-quality evidence regarding their efficacy relative to each other is scarce. The current study, as part of an ongoing randomized controlled trial, aimed to compare office-based arthroscopic lysis and lavage with arthrocentesis for TMJ pain and dysfunction. Methods: Adults (≥18 years old) referred to a tertiary care hospital with TMJ arthralgia were included. The exclusion criteria comprised systemic rheumatic disease, connective tissue disease, bony ankylosis, congenital or acquired dentofacial deformities, a history of significant jaw trauma, or systemic illnesses. The primary outcome was joint pain during mandibular movement/function (visual analog scale (VAS); 0–100 mm). The secondary outcomes included pain at rest (VAS), maximum mouth opening (mm), maximum mouth opening without increased pain (mm), protrusive and lateral movements (mm), joint noises (absent/present), and mandibular function (mandibular function impairment questionnaire score). The outcomes were registered at baseline and 3-, 6-, and 12-month follow-ups. Linear mixed models and mixed-effects logistic regressions were utilized to evaluate the effects of interventions on the repeated outcome measurements. Results: Twenty subjects were randomly allocated to office-based arthroscopic lysis and lavage (n = 10) or arthrocentesis (n = 10). Multivariable mixed-effects models showed significantly higher pain scores during mandibular movement/function in the arthrocentesis group compared with arthroscopy (22.42 mm (95% CI: 5.28 to 39.57); p = 0.011). The secondary outcomes were not significantly different between the interventions. Conclusions: The preliminary results show the superiority of office-based arthroscopy over arthrocentesis in reducing pain during mandibular movement/function over a follow-up period of 1 year while showing no differences between interventions regarding other study outcomes. Full article

Introduction: Tooth autotransplantation is a well-established dental surgical procedure. However, third molar autotransplantation to bony free flaps is rarely performed. We present a case of two impacted wisdom teeth that were transplanted to a DCIA free flap using 3D printing technologies. Case report: A 10-year-old girl was diagnosed with ossifying fibroma. She underwent a segmental mandibular resection with nerve preservation and reconstruction using a DCIA free flap. Six years later, due to edentulism, wisdom tooth autotransplantation was performed with digital planning, thermoplastic vacuum-formed guides, and 3D-printed replicas. Postoperatively, splint fixation was required for 12 weeks due to mobility, and a minor wound complication resolved spontaneously. At the one-year follow-up, the transplanted teeth integrated successfully without resorption or ankylosis. Orthodontic treatment was initiated to optimize alignment. Conclusions: This case of an impacted third molar autotransplantation to a DCIA free flap in an adolescent patient after a non-malignant mandibular tumor resection and reconstruction demonstrates promising results. The application of 3D printing technology significantly enhances the feasibility of dental transplantation in challenging cases, particularly for suboptimal donor teeth such as impacted wisdom teeth, by enabling precise surgical planning and optimized recipient site preparation while also reducing damage to the grafted teeth during transplantation. Further research is needed to assess the role of tooth autotransplantation in bony free flaps. Full article

Background/Objectives: Dentoalveolar ankylosis in adolescents involves a series of difficulties related to bone growth and development, especially in a vertical manner. A systematic review of studies on ankylosis in young permanent teeth treated by decoronation which considered the preservation/vertical growth of the alveolar bone as their main objective was carried out. Methods: The PRISMA 2020 guidelines were followed. Our research question was formulated using the PICO structure. Clinical cases or a series of cases of ankylosis in which a tooth had been treated with decoronation, with a minimum follow-up of one year, were included. The search was carried out in five databases. The selection of search terms was based on previous works within this framework and their most cited descriptors. The article selection and data extraction were carried out by two investigators. The JBI critical checklist of clinical cases was used for quality assessment. Results: Twelve articles were selected with a total of 23 cases that met the inclusion criteria. The mean age at the time of trauma was 9 years and the mean age at decoronation was 12.5 years. The traumatic event was avulsion in 10 out of the 14 cases. The upper right central incisor represented 62.5% of the sample compared to 25% for the contralateral tooth. The follow-up period ranged from 1 to 10 years. Vertical bone augmentation was found in all cases except in three cases where it remained stable. Conclusions: Based on the results of the present review, it can be concluded that decoronation is an effective technique for maintaining/stimulating vertical bone growth in young ankylosed permanent teeth and that complete root resorption is an important factor associated with vertical bone growth. Full article

Background: Patients with a triad of severe temporomandibular joint (TMJ) pathologies, obstructive sleep apnea (OSA), and dentofacial deformities often experience significant functional and aesthetic impairments. A combination of total TMJ reconstruction and maxillomandibular advancement (MMA) has emerged as a promising treatment option, which can address the complexity of these conditions simultaneously. Methods: This paper presents a practical protocol for TMJ reconstruction using patient-specific alloplastic total joint prosthesis in conjunction with additional splintless osteotomies. This approach integrates the recent advancements in virtual surgical planning (VSP), custom TMJ prostheses, and three-dimensional (3D) custom osteotomy guide and implant manufacturing, allowing for precise anatomical correction and enhanced treatment outcomes. Three patients were treated with the present protocol. Postoperative assessments mainly included maximum inter-incisal opening, apnea–hypopnea index (AHI), and patient satisfaction with facial aesthetics. Results: All surgeries were performed without complications. The follow-up period ranged from 7 to 12 months. For the two patients with TMJ ankylosis, the postoperative maximum inter-incisal opening (MIO) increased from 3–5 to 35 mm and from 12 to 32 mm, respectively. Additionally, all three cases demonstrated that the protocol could significantly decrease AHI (with improvements of 57.5, 49, and 66.4 events/h, respectively) and achieve satisfactory aesthetics. Conclusions: These findings suggest that this protocol is a viable option for addressing complex cases involving severe TMJ pathologies, OSA, and dentofacial deformities. Future studies with larger cohorts and long-term follow-up are needed to further validate these findings. Full article

Introduction and Clinical Significance: Tooth ankylosis is a serious complication that can occur because of the replantation of an avulsed tooth. However, few reports have investigated the follow-up of replanted or ankylosed primary incisors because the replantation of primary teeth is not recommended in the guidelines of the International Association of Dental Traumatology. Case Presentation: A boy aged 4 years and 8 months was referred to hospital for further evaluation of the maxillary right primary central incisor. It had been avulsed and replanted 2 years earlier. The tooth was positioned higher than the central incisor on the left side, and a metallic percussion sound was noted, leading to a diagnosis of tooth ankylosis. Long-term follow-up revealed the progression of ankylosis, and the tooth was finally extracted. At the age of 7 years and 6 months, permanent tooth eruption was detected, and no pathological finding was observed. Conclusions: In this case, root resorption of the replanted primary incisor was observed with age, but tooth ankylosis progressed, and natural exfoliation was difficult. The authors extracted the primary incisor appropriately, which aided the eruption of a successor permanent tooth. This report suggests the importance of patients visiting the dentist regularly after trauma to primary teeth and appropriate treatment by dentists to erupt the permanent teeth. Full article

Background: This is a retrospective study. The aim of this study is to report the results of bipolar minimally invasive fusionless surgery for scoliosis in Rett syndrome with a minimum follow-up of 2 years. Conservative treatment is often not effective in Rett syndrome scoliosis. Posterior spinal fusion (PSF) has a high rate of complications; early surgery using traditional growing rods (TGRs) controls the deformity while preserving spinal and thoracic growth before arthrodesis. The need for surgical rod lengthening still has a high rate of complications and costs. Methods: We recorded the clinical and radiological outcomes of 22 consecutive patients with Rett scoliosis who underwent bipolar fusionless surgery with a mean follow-up of 56 months (24–99). We performed a bilateral construct with rods (with or without a self-sliding device) anchored proximally with four hook claws distally to the pelvis by ilio-sacral (IS) screws through a minimally invasive approach. Results: The Cobb angle was reduced from 74.4° initially to 28.9° postoperatively and to 25.7° at the last follow-up, which corresponds to a 65% correction of the initial deformity. The gain was maintained at the last follow-up. None of the patients required spinal fusion at skeletal maturity (55% of our patients reached skeletal maturity). There was a gain in body weight (27.97 kg at preoperative time and 33.04 kg at postoperative time). The surgical complication rate was 32%. Conclusions: We recorded the stable correction of deformities and weight gain over time using the bipolar minimally invasive fusionless technique with a reduced rate of complication compared to arthrodesis. The arthrodesis was not necessary at skeletal maturity, thanks to the delayed natural ankylosis of a fixed spine. Full article