Search Results (75)

Tyre wear particles (TWPs), generated from tyre-road abrasion, are a pervasive and under-regulated environmental pollutant, accounting for a significant share of global microplastic contamination. Recent estimates indicate that 1.3 million metric tons of TWPs are released annually in Europe, dispersing via atmospheric transport, stormwater runoff, and sedimentation to contaminate air, water, and soil. TWPs are composed of synthetic rubber polymers, reinforcing fillers, and chemical additives, including heavy metals such as zinc (Zn) and copper (Cu) and organic compounds like polycyclic aromatic hydrocarbons (PAHs) and N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD). These constituents confer persistence and bioaccumulative potential. While TWP toxicity in aquatic systems is well-documented, its ecological impacts on terrestrial environments, particularly in agricultural soils, remain less understood despite global soil loading rates exceeding 6.1 million metric tons annually. This review synthesizes global research on TWP sources, environmental fate, and ecotoxicological effects, with a focus on soil–plant systems. TWPs have been shown to alter key soil properties, including a 25% reduction in porosity and a 20–35% decrease in organic matter decomposition, disrupt microbial communities (with a 40–60% reduction in nitrogen-fixing bacteria), and induce phytotoxicity through both physical blockage of roots and Zn-induced oxidative stress. Human exposure occurs through inhalation (estimated at 3200 particles per day in urban areas), ingestion, and dermal contact, with epidemiological evidence linking TWPs to increased risks of respiratory, cardiovascular, and developmental disorders. Emerging remediation strategies are critically evaluated across three tiers: (1) source reduction using advanced tyre materials (up to 40% wear reduction in laboratory tests); (2) environmental interception through bioengineered filtration systems (60–80% capture efficiency in pilot trials); and (3) contaminant degradation via novel bioremediation techniques (up to 85% removal in recent studies). Key research gaps remain, including the need for long-term field studies, standardized mitigation protocols, and integrated risk assessments. This review emphasizes the importance of interdisciplinary collaboration in addressing TWP pollution and offers guidance on sustainable solutions to protect ecosystems and public health through science-driven policy recommendations. Full article

Microplastics (MPs), defined as synthetic polymer particles less than 5 mm in diameter, are widely acknowledged as ubiquitous contaminants in aquatic ecosystems, including freshwater, marine, and polar environments. Global concern with MPs has significantly increased; nevertheless, much of the current knowledge remains fragmented and, at times, limited to specific regions or ecological compartments. This study emphasizes the necessity of a thorough synthesis by critically analyzing global microplastics’ dispersion patterns, ecological consequences, and associated human health concerns. A systematic approach was employed, integrating specific search terms and establishing inclusion and exclusion criteria across various scientific databases to obtain a representative collection of literature. The study covers important topics such as the classification of MPs, their distribution, environmental impacts, and interactions with other pollutants, including heavy metals, pharmaceuticals and endocrine-disrupting chemicals. Particular emphasis is placed on comparing ecosystem-specific vulnerabilities, such as those found in tropical wetlands, marine gyres, and polar systems. The review examines potential human exposure pathways, via contaminated seafood, water, and air, while also compiling new information about cellular and physiological damage, including oxidative stress, inflammation, hormone disruption, and possible genetic effects. This investigation highlights the value of collaborative monitoring, the adoption of biodegradable alternatives, policy development, and interdisciplinary research by integrating knowledge from ecology and public health. The primary objective is to advance ecosystem-specific mitigation techniques and promote evidence-based policy development in addressing this intricate environmental issue. Full article

High-temperature and high-pollution mobile sources are frequently encountered in industrial environments. Fixed-position exhaust outlets often fail to promptly remove heat and contaminants when these sources are in motion, leading to local accumulation and reduced indoor air quality. This study proposes a novel mobile exhaust system capable of tracking and dynamically aligning with moving emission sources to improve heat removal and cooling efficiency. Three configurations were evaluated: (1) a fixed exhaust outlet, (2) an exhaust vent moving synchronously with the heat source, and (3) a buoyancy-driven tracking exhaust outlet. Small-scale experiments and CFD simulations using dynamic mesh techniques were conducted. The results showed that the synchronous system reduced ambient temperature by an average of 0.25 to 2.3 °C compared to the fixed outlet, while the buoyancy-tracking system achieved an additional 0.15 to 2.5 °C reduction. The study also introduces a correlation between thermal plume inclination and the Archimedes number, providing a predictive basis for exhaust positioning. Given the similar dispersion patterns of heat and airborne pollutants, the proposed system holds promise for both thermal management and contaminant control in dynamic industrial environments. Furthermore, the system may offer critical advantages in emergency ventilation scenarios involving intense heat or hazardous pollutant outbreaks. Full article

The environment inside subway carriages is relatively enclosed, putting passengers at risk of respiratory infections during viral pandemics such as COVID-19 and SARS. This paper uses the Euler–Lagrange method to simulate the distribution of droplet nuclei produced by coughing under six different operating conditions in a subway carriage. The study investigates the impact of different air supply characteristics and ventilation methods, including mixed ventilation (MV), floor-supply, and ceiling-return ventilation (SFRC), on the distribution of droplets. These results indicate that under MV mode, the dispersion range of droplets during a patient’s cough is the largest, with an average droplet suspension rate (SR) of up to 77% at the initial moment. The SFRC system markedly diminishes droplet dispersion, decreasing the SR by 35%. Upon increasing the air supply velocity to 0.8 m/s, the SR diminishes to 6%, the probability of particles attaining a 2 m social distance (PRP) declines by roughly 70%, and the weighted average contamination range (CR) of coughing particles reaching a safe social distance reduces by 33.5%. These results may act as a guide for the subsequent design and optimization of airflow patterns in carriages to reduce the risk of cross-infection. Full article

Air pollution presents a serious hazard to human health and the environment for the global rise in industrialization and urbanization. While fine-grained monitoring is crucial for understanding the formation and control of air pollution and their effects on human health, existing macro-regional level or ground-level methods make air pollution inference in the same spatial scale and fail to address the spatiotemporal correlations between cross-grained air pollution distribution. In this paper, we propose a 3D spatiotemporal attention super-resolution model (AirSTFM) for fine-grained air pollution inference at a large-scale region level. Firstly, we design a 3D-patch-wise self-attention convolutional module to extract the spatiotemporal features of air pollution, which aggregates both spatial and temporal information of coarse-grained air pollution and employs a sliding window to add spatial local features. Then, we propose a bidirectional optical flow feed-forward layer to extract the short-term air pollution diffusion characteristics, which can learn the temporal correlation contaminant diffusion between closeness time intervals. Finally, we construct a spatiotemporal super-resolution upsampling pretext task to model the higher-level dispersion features mapping between the coarse-grained and fined-grained air pollution distribution. The proposed method is tested on the PM_2.5 pollution datatset of the Yangtze River Delta region. Our model outperforms the second best model in RMSE, MAE, and MAPE by 2.6%, 3.05%, and 6.36% in the 100% division, and our model also outperforms the second best model in RMSE, MAE, and MAPE by 3.86%, 3.76%, and 12.18% in the 40% division, which demonstrates the applicability of our model for different data sizes. Furthermore, the comprehensive experiment results show that our proposed AirSTFM outperforms the state-of-the-art models. Full article

The paper analyzes the processes of emission and dispersion of particulate contaminants from a large point source emitter: a hard coal-fired power plant. Reference is made to the European Green Deal and its main objective of reducing anthropogenic particulate and greenhouse gas emissions. CHPP, Krakow Combined Heat and Power Plant, Poland, as described in the article, has a strong impact on the mechanisms that shape the microclimatic factors of the Krakow agglomeration. This combined heat and power plant provides heat and electricity for the city, while simultaneously emitting significant amounts of suspended particulate matter into the atmosphere. Due to the adverse impact of non-conventional energy sources on the natural environment and the increasing effects of climate warming, radical changes need to be implemented. The HYSPLIT (Hybrid Single-Particles Lagrangian Integrated Trajectories) model was used to track the movement of contaminated air masses. A 5-day episode of increased hourly concentrations of PM2.5 particulate matter contamination was selected to analyze the backward trajectories of air mass displacement. From 15 August 2022 to 19 August 2022, high 24-h particulate matter concentrations were recorded, measuring around 20 µg/m³. The HYSPLIT model, a unique tool in the precise identification of point sources of pollution and their impact on the air quality of the region, was used to analyze the influx of polluted air masses. A 5-day episode of increased hourly concentrations of PM2.5 pollutants was selected for the study, with values of approximately 20 µg/m³. It was found that low-pressure systems over the North Atlantic brought wet and variable weather conditions, while high-pressure systems in southern and eastern Europe, including Poland, provided stable and dry weather conditions. The simulation results were verified by analyzing synoptic maps of the study area. The image of the displacement of contaminated air masses obtained from the HYSPLIT model was found to be consistent with the synoptic maps, confirming the accuracy of the applied model. This means that the HYSPLIT model can be used to create maps of contaminant dispersion directions. Consequently, it was confirmed that modeling using the HYSPLIT model is an effective method for predicting the displacement directions of particulate contamination originating from coal combustion in a combined heat and power plant. Identifying circulation patterns and front zones during episodes of increased contaminant concentrations is strategic for effective weather monitoring, air quality management, and alerting the public to episodes of increased health risk in a large agglomeration. Full article

Acid mine drainage (AMD), which is primarily caused by the exposure of sulfidic minerals to oxygen and water during mining operations, remains a significant contributor to environmental pollution. Numerous technologies have been developed to prevent/control and treat AMD, including the isolation of waste from the atmosphere and treatment systems for AMD-impacted water. Many field studies on mine site reclamation have involved an individual AMD source and/or technology, with a limited number of studies looking at reclamation programs integrating multiple approaches to manage AMD stemming from both surface and underground sources. The former Franklin mine site in Nova Scotia, Canada, was impacted by the deposition of waste rock across the site and the discharge of mine water from underground workings, with the adjacent Sullivan’s Pond serving as the main environmental receptor. Site reclamation was completed in 2010 and involved the following: (1) excavation of the dispersed waste rock (117,000 m²) and backfilling with clean soil; (2) consolidation of the excavated waste rock into a covered, compact waste rock pile (WRP) (25,000 m²); and (3) construction of a passive treatment system for the discharging underground mine water. An extensive field sampling program was conducted between 2011 and 2018 to monitor a range of meteorological, cover material, waste rock, groundwater, and surface water quality parameters. The results confirm that the multi-layer, geomembrane-lined WRP cover system is an extremely effective barrier to air and water influx, thereby minimizing the rate of AMD generation and seepage into groundwater and eliminating all contaminated surface water runoff. A small AMD groundwater plume emanates from the base of the WRP, with 50% captured by the underground mine workings over the long term and 50% slowly migrating towards Sullivan’s Pond. Excavation of the former waste disposal area eliminated the AMD source from the previously dispersed waste, with only clean surface water runoff and a diminishing legacy groundwater plume remaining. Finally, the passive treatment system, which contains a series of treatment technologies such as a limestone leach bed and settling pond, successfully treats all mine water loading (~50 kg/day) discharging from the underground workings and surface runoff. Its additional treatment capacity (up to ~150 kg/day) ensures it will be able to manage any potential drop in treatment efficiency and/or increased AMD loading from long-term WRP seepage. This comprehensive study of mine site reclamation and AMD management at an abandoned mining site can be of great reference value for environmental management and policymakers in the mining sector. Full article

There are three components to every environmental protection system: monitoring, estimation, and control. One of the main toxic gases with considerable effects on human health is NO₂, which is released into the atmosphere by industrial activities and the transportation network. In the present research, a NO₂ sensor is designed based on Fe₃O₄ piperidine-4-sulfonic acid grafted onto a reduced graphene oxide Fe₃O₄@rGO-N-(piperidine-4-SO₃H) nanocomposite, due to the highly efficient detection of pollution in the air. In the first phase of the present study, the nanocomposite synthesis is performed in four steps. Afterward, the novel fabricated nanosensor is characterized through energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Raman, surface area analysis, and field emission scanning electron microscopy (FE-SEM). To determine the optimal condition for sensor performance, graphene-based nanosensors are prepared with various weight percentages (wt%) of rGO-N-(piperidine-4-SO₃H) (1 wt%, 5 wt%, 10 wt%, and 15 wt%). During the experimental process, the performance of the sensors, in terms of the sensitivity and response time, is investigated at different NO₂ concentrations, between 2.5 and 50 ppm. The outputs of this study demonstrate that the synthesized nanosensor has the best efficiency at more than a 5 ppm contamination concentration and with at least 15 wt% of rGO-N-(piperidine-4-SO₃H). Full article

This study presents a modern mobile laboratory to monitor outdoor air quality in Bucharest, Romania, with a focus on pollutants associated with transportation. Particulate matter (PM₂.₅, PM₁₀), carbon monoxide (CO), ozone (O₃), sulfur dioxide (SO₂), nitrogen oxides (NO, NO₂), and BTEX compounds (benzene, toluene, ethylbenzene, and xylenes) were among the significant pollutants that were examined in the lab. Meteorological variables such wind direction and speed, temperature, humidity, and solar radiation were also routinely observed in order to assess their influence on pollution levels. The study looked at two locations—a bustling city road in Bucharest and a remote community 40 kmawayin Snagov—under a range of weather conditions, including sunny, rainy, warm, and chilly days. The findings showed that the primary source of pollution in the urban area, which had significantly higher pollution levels than the rural site, was transportation. Particularly in the city, alarming concentrations of harmful particulate matter and carcinogens like benzene were found, underscoring the need for continuous air quality monitoring. The weather has a major impact on the dispersal of contaminants. Because of washout effects, rainy days decreased airborne pollutants, but sunny days showed higher pollution deposition. This study highlights the importance of outdoor air quality monitoring, particularly in urban environments, where traffic and weather have a significant impact on pollution levels. These findings provide crucial data that policymakers can utilize to implement targeted pollution control measures that protect human health. Full article

Due to their antibacterial and antifungal properties, parabens are commonly used as biocides and preservatives in food, cosmetics, and pharmaceuticals. Parabens have been reported to exist in various water matrices at low concentrations, which renders the need for sample preparation before their quantification using analytical techniques. Thus, sample preparation methods such as solid-phase extraction (SPE), rotating-disk sorptive extraction (RDSE), and vortex-assisted dispersive liquid–liquid extraction (VA-DLLE) that are commonly used for parabens extraction and preconcentration have been discussed. As a result of sample preparation methods, analytical techniques now detect parabens at trace levels ranging from µg/L to ng/L. These compounds have been detected in water, air, soil, and human tissues. While the full impact of parabens on human health and ecosystems is still being debated in the scientific community, it is widely recognized that parabens can act as endocrine disruptors. Furthermore, some studies have suggested that parabens may have carcinogenic effects. The presence of parabens in the environment is primarily due to wastewater discharges, which result in widespread contamination and their concentrations increased during the COVID-19 pandemic waves. Neglecting the presence of parabens in water exposes humans to these compounds through contaminated food and drinking water. Although there are reviews that focus on the occurrence, fate, and behavior of parabens in the environment, they frequently overlook critical aspects such as removal methods, policy development, and regulatory frameworks. Addressing this gap, the effective treatment of parabens in water relies on combined approaches that address both cost and operational challenges. Membrane filtration methods, such as nanofiltration (NF) and reverse osmosis (RO), demonstrate high efficacy but are hindered by maintenance and energy costs due to extensive fouling. Innovations in anti-fouling and energy efficiency, coupled with pre-treatment methods like adsorption, help mitigate these costs and enhance scalability. Furthermore, combining adsorption with advanced oxidation processes (AOPs) or biological treatments significantly improves economic and energy efficiency. Integrating systems like O₃/UV with activated carbon, along with byproduct recovery strategies, further advances circular economy goals by minimizing waste and resource use. This review provides a thorough overview of paraben monitoring in wastewater, current treatment techniques, and the regulatory policies that govern their presence. Furthermore, it provides perspectives that are critical for future scientific investigations and shaping policies aimed at mitigating the risks of parabens in drinking water. Full article

Infections pose a risk for patients undergoing hematopoietic stem cell (HSC) transplants due to their immunosuppression, making them susceptible to opportunistic infections. Therefore, understanding the composition of the aerobiome in this area is vital. The aim of this study was to characterize the aerobiome in an HSC transplant area, evaluating the impact of infrastructure and health personnel operations on air contamination. The environmental parameters and aerobiome of the HSC transplant area at Hospital Juárez de México were quantified over one year. Finally, a double-entry Vester matrix was constructed to classify problems according to their degree of causality. The abundance and taxonomic diversity of the aerobiome were dependent on seasonality, environmental factors, and high-efficiency filtration. Gram-positive bacteria predominated, followed by fungi and Gram-negative bacteria. ANOVA revealed significant differences in the bacterial aerobiome but not in the fungal aerobiome among the transplant rooms. Clinically, fungi such as Aspergillus fumigatus, Alternaria spp., Cladosporium spp., and Penicillium spp. were identified. ESKAPE bacteria typing revealed clonal dispersion. Finally, the Vester matrix highlighted critical problems associated with contamination due to the absence of HEPA filtration and non-adherence in patient management practices. HEPA filtration and positive pressure are essential to improve the air quality and reduce the microbiological load. However, the control areas will depend on patient management and routine activities, such as entry protocols in controlled areas. Full article

Microplastics (MPs) are omnipresent particles that receive special attention because of their persistent nature and their potential impact on human disease and on the environment. Most MPs are generated by the degradation of larger plastic items such as clothing, car tires, and discarded plastic materials. In indoor environments, where human beings spend most of their time, aerial MP levels are higher, and the majority are fibers produced from textiles. Airborne MPs indoors are a greater potential danger to humans than MPs ingested in food and drink. Fragments small enough to remain substantially suspended in the air column, the small airborne microparticles that are measured as PM₁₀ and PM_2.5, become available for assimilation by human beings through respiration, potentially producing various health problems. Larger MPs act by ingestion and skin contact. MPs can carry microorganisms and micropollutants adsorbed to their surfaces, facilitating their uptake and survival within the human body. Indoor airborne MPs thus represent emerging pollutants of fast-growing concern that are especially important as potential invaders of the human respiratory system, reaching the alveoli of the lungs and finally entering the circulatory system and other tissues. Since this direct human exposure to MP contamination via indoor air is so important, we discuss in this article the ways in which MP concentration and dispersal in indoor air can be affected by air turbulence that is induced by anthropogenic objects such as air conditioners, filters, and purifiers. Much evidence is equivocal and further research is necessary. Full article

Evaluating aviation emissions and examining the dispersion properties of contaminants are crucial for understanding atmospheric pollution. To assess the pollutant emissions and dispersion of aircraft during the landing and takeoff (LTO) cycle, and address air pollution surrounding the airport resulting from flight operations, this study evaluated emissions throughout the LTO phase based on Quick Access Recorder (QAR) data in conjunction with the first-order approximation method. An improved Gaussian diffusion model for mobile point sources was employed to examine the diffusion characteristics of contaminants. Additionally, CFD calculation outcomes for various exhaust velocities and wind speeds were utilized to validate the trustworthiness of the improved Gaussian model. The discussion also encompasses the influence of diffusion time, wind direction, wind speed, temperature gradient, and particle deposition on the concentration distribution of contaminants. The findings indicated that the Gaussian diffusion model aligned with the results of the CFD calculations. The diffusion distribution of contaminants around airports varies over time and is significantly influenced by atmospheric environmental factors, including wind direction, wind speed, and atmospheric stability. Specifically, a change in wind direction from 0° to 45° caused a shift of approximately 1000 m in the contaminant’s center. An increase in wind speed from 3 m/s to 5 m/s led to a decrease in concentration by about 15%. Furthermore, a transition in atmospheric stability from category ‘a’ (very unstable) to ‘f’ (very stable) resulted in a two-order-of-magnitude increase in contaminant concentrations. Full article

This paper presents a sustainable recycling process for the separation and recovery of tempered glass from end-of-life photovoltaic (PV) modules. As glass accounts for 75% of the weight of a panel, its recovery is an important step in the recycling process. Current methods, such as mechanical, chemical and thermal processes, often lead to contamination of the glass and pose significant environmental risks. In response to these challenges, a thermal–mechanical delamination approach is proposed in this study. The method utilizes controlled heat application (hot air gun) to weaken the adhesive bond between the glass and encapsulant, allowing for separation with a thin stainless steel wire. Various analytical methods, including X-ray diffraction analysis (XRD), X-ray fluorescence (XRF) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), were used to verify the effectiveness of the proposed method. The results show that the proposed method is effective. In less than a minute, the glass layer was separated and recovered with a success rate of over 99%, with no degradation of the material or release of gasses. The significance of this process lies in its ability to recover high-purity glass while minimizing the impact on the environment. This opens up the possibility of reusing the recovered tempered glass in new PV panels or other applications, reducing the need for virgin materials and lowering the overall environmental footprint of the solar energy industry. Full article

This study investigated the distribution of heavy metals in agricultural soils in the vicinity of three large mining landfills of the Kizhnica mine in the Republic of Kosovo. The mining sector is one of the most important sectors of Kosovo’s economic development, and the Kizhnica mine is one of the most important ore producers in Kosovo. Besides the positive aspects, the development of production also has some negative side effects, such as the generation of industrial waste and the possible contamination of surrounding areas, including agricultural land. Therefore, ten sampling sites were selected in the vicinity of the Kizhnica mine. These sites were characterized and assessed as the most important due to the anthropogenic impact of mineral processing and open-tailing waste deposits in Kizhnica. The concentration of Pb, Zn, Cu, As, Cd, Ni, Mn and Sb in the selected samples was determined using inductively coupled plasma–optical emission spectrometry. The data obtained were used to create geochemical maps and calculate the contamination factor, pollution load index and geoaccumulation index. Cluster analysis, Pearson correlation coefficient and air spatial distribution patterns using the air dispersion model were used to evaluate within the area. The results showed that heavy metal levels are influenced by the anthropogenic nature of pollution, confirming a current ecological threat from mining activities in the region. In order to improve waste management, reduce the hazardous impacts of mining and contribute to the sustainable development of the region, the potential reuse of the deposited waste material in the construction industry is proposed. Full article