Search Results (107)

MnO₂ nanostructures were successfully synthesized via the reduction of KMnO₄ solutions using the gliding arc plasma (Plasma Glidarc) approach. Here, we highlight the effect of different plasmagenic gases, such as moist air (atmospheric air), dry air, nitrogen (N₂) or oxygen (O₂). The obtained materials were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and scanning electron microscopy (SEM). The crystalline structures of obtained MnO₂ polymorphs are mainly γ-MnO₂ and α-MnO₂, regardless of the feeding gas. The main reactive species, in addition to nitrogenous species like NO· radical generated with moist air, dry air or N₂ gas, other oxygenated species such as H₂O₂ (E°(O₂/H₂O₂) = 0.69 V) are produced with O₂ able to reduce KMnO₄ solution (E°(KMnO₄/MnO₂) = 1.70 V). Helium gas did not allow for the plasma reduction of the KMnO₄ solution, even after 60 min of exposure. Furthermore, gas humidification did not significantly affect the precipitation time or the properties of plasma-synthesized MnO₂. Atmospheric humidified air appears to be the best plasmagenic gas, as it allows for a shorter synthesis time and leads to a large specific surface area. All plasma-synthesized MnO₂ showed good activity during the catalytic oxidation of benzene. The use of different MnO₂ polymorphs (α-, δ- and γ-MnO₂) showed that, in addition to the specific surface area, the crystalline structure significantly affects the catalytic oxidation of benzene. K⁺ species inserted within the MnO₂ structure allow for their stability during the catalytic process. This work highlights the possibility to use different plasmagenic gases to prepare MnO₂ nanostructures through plasma glidarc for the catalytic oxidation of benzene. Full article

The line ratios in X-ray emission resulting from charge exchange between highly charged ions (HCIs) and neutral atoms are not only crucial for accurately modeling astrophysical X-ray emissions but also offer a unique perspective on the charge exchange processes happening during collisions. The K X-ray spectra following charge exchange between Mg¹¹⁺ and He are presented for a collision velocity of 1489 km/s (11.5 keV/amu). The spectra were measured by two Silicon Drift Detectors capable of resolving the Mg¹⁰⁺ Kα, Kβ, Kγ, and Kδ+ lines. The line intensity ratios of Kβ, Kγ, and Kδ+ relative to the Kα line, as well as the hardness ratio, were obtained. The experimental results were compared with the theoretical results from a cascade model that utilizes the state cross-sections produced by multichannel Landau–Zener (MCLZ) calculation. It was discovered that the K X-ray spectrum features can be reproduced well by MCLZ theory when the contributions of both single electron capture (SEC) and autoionizing double capture (ADC) processes are included. This finding implies that the ADC feeding mechanism is significant and should be taken into account for the X-ray emission during charge exchange between highly charged ions and multielectron atoms. Full article

As the development of nuclear fusion depends on plasma-facing materials, new methods for improving the radiation resistance of tungsten are being created and tested. This paper presents the results of studying the structure, surface morphology, phase composition, and residual internal stresses in tungsten alloys modified by plasma flows and irradiated with helium ions with an energy of 40 keV and doses of (1–3) × 10¹⁷ cm⁻². It is shown that the effect of compression plasma flows on tungsten leads to the modification of its grain structure in the near-surface layer, forming dispersed cells of 220–320 nm in size due to high-speed crystallization. The results of measuring the lattice parameters and internal stresses in irradiated tungsten alloys showed that the near-surface layer accumulates radiation defects, creating internal stresses, the relaxation of which leads to local destruction of the surface. Preliminary plasma treatment creates an increased density of intergranular boundaries, which serve as sinks for radiation defects and increase the radiation resistance of tungsten alloys. Full article

Photon (X-ray) radiotherapy is the most common treatment used in cancer therapy. However, the exposure of normal tissues and organs at risk to ionising radiation often results in a significant incidence of low-grade adverse side effects, whilst high-grade toxicities also occur at concerningly high rates. As an alternative, boron neutron capture therapy (BNCT) aims to create densely ionising helium and lithium ions directly within cancer cells, thus sparing the surrounding normal cells and tissues but also leading to significantly more effective tumour control than X-rays. Although very promising for patients with recurring and highly invasive tumours, BNCT does not currently have widespread use worldwide, in part due to limited and reliable neutron sources for clinical use. Another limitation is devising strategies leading to the selective and optimal accumulation of boron within the cancer cells. Boronophenylalanine (BPA) is currently the major compound used in BNCT which takes advantage of the amino acid transporter LAT1 that is overexpressed in a number of human cancers. Additionally, there is a lack of in-depth knowledge regarding the impact of BNCT on cellular DNA, and the molecular mechanisms that are responsive to the treatment, which are important in developing optimal therapeutic strategies using BNCT, are unclear. In this review, we highlight the current knowledge of the radiobiology of BNCT acquired from in vitro and in vivo studies, particularly in the context of DNA damage and repair, but also present evidence of established and new boron-containing compounds aimed at enhancing the specificity and effectiveness of the treatment. Full article

In this work, a set of analytical techniques, including scanning electron microscopy (SEM), Raman scattering spectroscopy, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray microanalysis (EDX) and cyclic voltammetry (CV), were used to study the impact of high-energy He⁺ ion irradiation on the structural and electrochemical characteristics of sulfur-containing multi-walled carbon nanotubes (S-MWCNTs) placed on a titanium substrate. The results indicate that the ion beam treatment of the S-MWCNT system led to an increase in the level of imperfections on the surface structures of the nanotubes due to the formation of point defects on their outer walls and the appearance of oxygen-containing functional groups, including SO_x groups, near these defects. At the same time, a significant increase in the sulfur concentration (by 6.4 times) was observed on the surface of the S-MWCNTs compared to the surface of unirradiated nanotubes. This was due to the redeposition of sulfur atoms near the point defects under the action of the ion beam, followed by the subsequent formation of direct S–C chemical bonds. Electrochemical studies demonstrated that the irradiated S-MWCNTs/Ti system exhibit enhanced catalytic activity, with improved oxygen reduction reaction (ORR) performance and a substantial increase in anodic current during the oxidation reaction of hydrogen peroxide under alkaline conditions, highlighting their potential for advanced electrocatalytic applications. Full article

External pressure is often applied during sintering to obtain materials with improved properties. For complex concentrated alloys (CCAs), this processing step is commonly performed in vacuum. However, this can promote the evaporation of elements and increase the oxide content, thereby degrading the properties of the alloy. In this study, we compared the microstructures and properties of AlCrCuFeMnNi CCA samples obtained by hot uniaxial pressing sintering (HPS) and pressureless sintering (PLS) using a helium atmosphere purified by an oxygen getter system. The powders were prepared from mixtures of CrFeMn, AlNi and Cu and sintered by HPS at 900 °C for 1 h with an applied pressure of 30 MPa and by PLS at 1050 °C for 1 h. The samples were characterised using X-ray diffraction, scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, electron backscattering diffraction, density measurements and hardness tests. It was found that the oxygen getter system promoted oxygen partial pressure values at sintering temperatures similar to those of a mixture of 90% helium and 10% hydrogen. The HPS allowed us to obtain almost fully dense samples with a smaller average grain size and finer distribution of aluminium oxides than PLS. These differences increased the hardness of the samples sintered under pressure. Full article

This study explores the fabrication of tannic acid-crosslinked gelatin nanofibers via electrospinning, followed by helium and nitrogen plasma treatment to enhance their biofunctionality, which was assessed using fibroblast cells. The nanofibers were characterized using scanning electron microscopy, atomic force microscopy, attenuated total reflection Fourier transform infrared spectroscopy, X-ray diffraction, and water contact angle measurements before and after treatment. Helium and nitrogen gas plasma were employed to modify the nanofiber surfaces. Results indicated that helium and nitrogen plasma treatment significantly increased the hydrophilicity and biofunctionality of the nanofibers by 5.1° ± 0.6 and 15.6° ± 2.2, respectively, making them more suitable for human skin fibroblast applications. To investigate the impact of plasma treatment on gelatin, we employed a computational model using density functional theory with the B3LYP/6-31+G(d) method. This model represented gelatin as an amino acid chain composed of glycine, hydroxyproline, and proline, interacting with plasma particles. Vibrational analysis of these systems was used to interpret the vibrational spectra of untreated and plasma-treated gelatin. To further correlate with experimental findings, molecular dynamics simulations were performed on a system of three interacting gelatin chains. These simulations explored changes in amino acid bonding. The computational results align with experimental observations. Comprehensive analyses confirmed that these treatments improved hydrophilicity and biofunctionality, supporting the use of plasma-treated gelatin nanofibers in skin tissue engineering applications. Gelatin’s natural biopolymer properties and the versatility of plasma surface modification techniques underscore its potential in regenerating cartilage, skin, circulatory tissues, and hamstrings. Full article

The first experimental results obtained by the ion beam-induced luminescence technique from the ceramic bodies of ancient tiles are reported in this work. The photon emission from the ceramic bodies is related to the starting minerals and the manufacturing conditions, particularly the firing temperature and cooling processes. Moreover, the results indicate that this non-destructive technique, performed under a helium-rich atmosphere instead of an in-vacuum setup and with acquisition times of only a few seconds, presents a promising alternative to traditional, often destructive, compositional characterisation methods. Additionally, by adding other ion beam-based techniques such as PIXE (Particle-Induced X-ray Emission) and PIGE (Particle-Induced Gamma-ray Emission), compositional information from light elements such as Na can also be inferred, helping to also identify the raw materials used. Full article

Nanostructured ferritic alloys (NFAs), such as oxide-dispersion strengthened (ODS) alloys, play a vital role in advanced fission and fusion reactors, offering superior properties when incorporating nanoparticles under irradiation. Despite their importance, the high cost of mass-producing NFAs through mechanical milling presents a challenge. This study delves into the microstructure-mechanical property correlations of three NFAs produced using a novel, cost-effective approach combining severe plastic deformation (SPD) with the continuous thermomechanical processing (CTMP) method. Analysis using scanning electron microscopy (SEM)-electron backscatter diffraction (EBSD) revealed nano-grain structures and phases, while scanning transmission electron microscopy (STEM)-energy dispersive X-ray spectroscopy (EDS) quantified the size and density of Ti-N, Y-O, and Cr-O fine particles. Atom probe tomography (APT) further confirmed the absence of finer Y-O particles and characterized the chemical composition of the particles, suggesting possible nitride dispersion strengthening. Correlation of microstructure and mechanical testing results revealed that CTMP alloys, despite having lower nanoparticle densities, exhibit strength and ductility comparable to mechanically milled ODS alloys, likely due to their fine grain structure. However, higher nanoparticle densities may be necessary to prevent cavity swelling under high-temperature irradiation and helium gas production. Further enhancements in uniform nanoparticle distribution and increased sink strength are recommended to mitigate cavity swelling, advancing their suitability for nuclear applications. Full article

The paper presents the results of studying the structure and phase state of tungsten and tungsten-copper alloy after pulsed action of compression plasma flows and irradiation with helium ions. The compression plasma flows were used to modify the surface layer of tungsten, as well as to create an alloy based on tungsten and copper. Using scanning electron microscopy and X-ray structural analysis, the formation of radiation defects on the tungsten surface was detected in the form of local areas of exfoliation and destruction, which begin to form at helium ion irradiation doses of 2 × 10¹⁷ cm⁻². It is shown that preliminary plasma treatment of the surface in the melting mode leads to the complete disappearance of surface radiation defects up to a dose of 2 × 10¹⁷ cm⁻², which may be associated with the formation of a fine-crystalline grain structure, the intergranular boundaries of which serve as effective sinks for primary radiation defects. Full article

High-entropy alloys (HEA) are promising structural materials that will successfully resist high-temperature irradiation with helium ions and radiation-induced swelling in new generations of nuclear reactors. In this paper, changes in the elemental and phase composition, surface morphology, and structure of CoCrFeNi and CoCrFeMnNi HEAs irradiated with He²⁺ ions at a temperature of 700 °C were studied. Structural studies were mainly conducted using the X-ray diffraction method. The formation of a porous surface structure with many microchannels (open blisters) was observed. The average diameter of the blisters in CoCrFeMnNi is around 1.3 times smaller than in CoCrFeNi. It was shown that HEAs’ elemental and phase compositions are stable under high-temperature irradiation. It was revealed that, in the region of the peak of implanted helium, high-temperature irradiation leads to the growth of tensile macrostresses in CoCrFeNi by 3.6 times and the formation of compressive macrostresses (−143 MPa) in CoCrFeMnNi; microstresses in the HEAs increase by 2.4 times; and the dislocation density value increases by 4.3 and 7.5 times for CoCrFeNi and CoCrFeMnNi, respectively. The formation of compressive macrostresses and a higher value of dislocation density indicate that the CoCrFeMnNi HEA tends to have greater radiation resistance compared to CoCrFeNi. Full article

Microwave-based reactions have gained traction in recent years due to their ability to enhance reaction rates and yield while reducing energy consumption. Also, according to the conception of ‘waste to materials’, various waste feeds are intensively sought to be tested. The experimental setup of this study involved varying pH levels, oxidation agents, and precipitation agents to optimize the synthesis process of iron red based on waste iron sulfate. The selection of oxidation and precipitation agents was found to significantly influence the pigment synthesis process. Various oxidizing agents, including hydrogen peroxide and atmospheric air, were evaluated for their effectiveness in promoting the oxidation of ferrous ions to ferric ions, essential for pigment formation. Additionally, different precipitation agents such as sodium hydroxide and ammonia solution were assessed for their ability to precipitate iron hydroxides and facilitate pigment particle formation. The characterization of synthesized pigments revealed promising results in terms of quality and color properties. Helium Ion Microscopy (HIM) analysis confirmed the formation of well-defined pigment particles with controlled morphology. X-ray diffraction (XRD) studies provided insights into the crystalline structure of the pigments, indicating the presence of characteristic iron oxide phases. By improving this technology, waste iron sulfate can be efficiently transformed into valuable iron pigments, offering a sustainable solution for waste management while meeting the growing demand for high-quality pigments. Full article

In this work, the tensile deformation mechanisms of the Fe₅₅Co_17.5Cr_12.5Ni₁₀Mo_5−xC_x-based medium-entropy alloy at room temperature (R.T.), 77 K, and 4.2 K are studied. The formation of micro-defects and martensitic transformation to delay the cryogenic fracture are observed. The results show that FeCoCrNiMo_5−xC_x-based alloys exhibit outstanding mechanical properties under cryogenic conditions. Under an R.T. condition, the primary contributing mechanism of strain hardening is twinning-induced plasticity (TWIP), whereas at 77 K and 4.2 K, the activation of martensitic transformation-induced plasticity (TRIP) becomes the main strengthening mechanism during cryogenic tensile deformation. Additionally, the carbide precipitation along with increased dislocation density can significantly improve yield and tensile strength. Furthermore, the marked reduction in stacking fault energy (SFE) at cryogenic temperatures can promote mechanisms such as twinning and martensitic transformations, which are pivotal for enhancing ductility under extreme conditions. The Mo₄C₁ alloy obtains the optimal strength–ductility combination at cryogenic-to-room temperatures. The tensile strength and elongation of the Mo4C1 alloy are 776 MPa and 50.5% at R.T., 1418 MPa and 71.2% in liquid nitrogen 77 K, 1670 MPa and 80.0% in liquid helium 4.2 K, respectively. Full article

This study reports on the magnetic hardening phenomenon of heavily helium ion-irradiated iron–chromium alloys. The alloys are important structural materials in next-generation nuclear reactors. In some cases, problems may arise when the magnetic properties of the materials change due to neutron irradiation. Therefore, it is necessary to understand the effects of irradiation on magnetism. Helium irradiation was conducted as a simulated irradiation, and the effect of cavity formation on magnetic properties was thoroughly investigated. High-quality single-crystal Fe-x%Cr (x = 0, 10, 20) films, with a thickness of 180–200 nm, were fabricated through ultra-high vacuum evaporation. Subsequently, irradiation of 19 dpa with 30 keV He⁺ ions was conducted at room temperature. X-ray diffraction measurements and electron microscopy observations confirmed significant lattice expansion and the formation of high-density cavities after irradiation. The magnetization curve of pure iron remained unchanged, while magnetic hardening was noticed in iron–chromium alloys. This phenomenon is believed to be due to the combined effect of cavity formation and changes in the atomic arrangement of chromium. Full article

A complex study of the adhesion of multi-walled carbon nanotubes to a titanium surface, depending on the modes of irradiation with He⁺ ions of the “MWCNT/Ti” system, was conducted using atomic force microscopy and X-ray photoelectron spectroscopy. A quantitative assessment of the adhesion force at the interface, performed using atomic force microscopy, demonstrated its significant increase as a result of treatment of the “MWCNT/Ti” system with a beam of helium ions. The nature of the chemical bonding between multi-walled carbon nanotubes and the surface of the titanium substrate, which causes this increase in the adhesion of nanotubes to titanium as a result of ion irradiation, was investigated by X-ray photoelectron spectroscopy. It was established that this bonding is the result of the formation of chemical C–O–Ti bonds between titanium and carbon atoms with the participation of oxygen atoms of oxygen-containing functional groups, which are localized on defects in the nanotube walls formed during ion irradiation. It is significant that there are no signs of direct bonding between titanium and carbon atoms. Full article