Search Results (2,908)

This research aimed to evaluate the effects of formulation and process conditions on the physical and structural properties of starch–brewers’ spent grain films. Three factors were considered: BSG amounts (0, 1, 3, 5%), a possible ultrasonication pre-treatment, and different microwave gelatinization treatments (450 W for 80 and 90 s; 900 W for 45 and 50 s). An increase in BSG is responsible for increases in moisture (10.72 → 23.40%), water absorption (67.65 → 95.73%), density (0.90 → 1.27 g/cm³), browning index (5.86 → 85.88), UV blocking capacity (82.42% → 99.96% for UV_A; 61.28% → 99.86% for UV_B), and degradability in the first 7 days (58.72 → 66.57%), but dramatically decreases the Young’s modulus and tensile strength (fallen to 2.90 N/mm² and 0.21 N/mm², at 5% BSG). Sonication contributes to increased browning index (36.17 → 37.24), UV blocking capacity, solubility (49.35 → 51.49%) and Young’s modulus (4.40 → 4.77 N/mm²). The most severe microwave treatment (900 W, 50 s) minimizes moisture (15.83%) and water absorption (80.89%) and maximizes density (1.21 g/cm³), browning index (37.52), and Young’s modulus (5.37 N/mm²). SEM micrographs allow us to observe that the film surface appears rough, and the structure becomes increasingly porous as BSG % increases. The regression analysis indicates that the quadratic model effectively describes the relationships between the three factors and each of the most important properties of the films; it is suitable for predicting film behavior and optimizing their characteristics depending on the desired use. Full article

The widespread presence of stable and hazardous organic contaminants, such as synthetic dyes, in industrial effluents necessitates the development of resilient treatment strategies capable of achieving efficient degradation and decolorization of dye pollutants. Conventional treatment processes often fail to remove such recalcitrant compounds, prompting growing interest in integrated advanced systems. Photocatalytic membranes represent a promising solution due to the synergistic combination of physical separation and catalytic degradation. In this study, zinc oxide (ZnO) thin films were deposited by spin coating onto smectite–zeolite ceramic membranes (MS10/Z90), applying one (M1), two (M2), and three (M3) successive coating layers to control catalyst thickness. SEM analysis confirmed that increasing the number of layers resulted in a thicker and more homogeneous ZnO coating, while XRD revealed enhanced crystallinity and larger crystallite size. Water permeability decreased progressively from 623 L·h⁻¹·m⁻²·bar⁻¹ for the uncoated membrane to 506, 439, and 350 L·h⁻¹·m⁻²·bar⁻¹ for M1, M2, and M3, respectively. Photocatalytic performance was evaluated using Rhodamine B (RhB) (10 mg·L⁻¹) under UV irradiation (365 nm, 18 W) for 180 min, achieving degradation efficiencies of 83.0%, 94.6%, and 99.1% for M1, M2, and M3, respectively. The degradation kinetics followed a pseudo-first-order model, with rate constants increasing with catalyst layer thickness. Free radical scavenging assays confirmed that hydroxyl radicals (•OH) were the primary reactive species responsible for RhB degradation. These findings highlight the critical influence of ZnO layer thickness and mass transfer on photocatalytic performance, demonstrating the potential of ZnO-coated ceramic membranes for efficient pollutant degradation and in situ photocatalytic regeneration. Permeability measurements after photocatalytic treatment confirmed effective flux recovery, supporting the operational durability of the developed membranes. Full article

Photoaging is an extrinsic skin aging process caused by chronic ultraviolet (UV) radiation. A core pathological feature of photoaging is excessive oxidative stress, which can further induce ferroptosis. The HSP70 family plays a critical role in this stress response by protecting the key antioxidant enzyme GPX4. In this study, we established UV-induced photoaging models in cultured cells and 3D skin organoids. UPLC-MS/MS analysis of Chenpi transdermal permeate (prepared by in vitro transdermal penetration of Chenpi extract through mouse skin) identified hesperidin as the primary bioactive compound of Chenpi (dried peel of the plant Citrus reticulata Blanco after the aging process). The efficacy of hesperidin was validated in human keratinocytes (HaCaTs), fibroblasts (HSFs), and skin organoids. Mechanistically, transcriptomic and metabolomics analysis indicated that ferroptosis is a key pathway through which hesperidin ameliorates photoaging. Limited proteolysis mass spectrometry (LiP-MS), transcriptomics, and molecular dynamics simulation results demonstrated that hesperidin directly binds to the molecular chaperone HSPA1L. By upregulating HSPA1L expression, hesperidin enhanced the stability of GPX4 and suppressed UV-triggered ferroptosis. Our findings identify the HSPA1L/GPX4 axis as a critical redox regulatory pathway targeted by hesperidin, providing a mechanistic foundation for anti-photoaging therapies. Full article

Peptide deformylase (PDF) belongs to a conserved enzyme family critical for N-terminal methionine excision (NME), an essential protein maturation process in prokaryotes and eukaryotic organelles (chloroplasts, mitochondria). To explore the potential functions of OsPDFs in Oryza sativa, this study employed bioinformatics approaches and experimental validation to systematically identify and analyze the OsPDF gene family. Three OsPDF genes (OsPDF1A, OsPDF1B, OsPDF1B2) were identified in rice. These genes are exclusively distributed on chromosome 1. The biophysical properties of these proteins showed that OsPDF1A and OsPDF1B are alkaline proteins, while OsPDF1B2 is acidic, and all are hydrophilic with moderate thermostability potential. Synteny analysis revealed closer evolutionary relationships between Oryza sativa and the monocot Triticum aestivum than with dicots, reflecting conserved PDF function in gramineous plants. Analysis of cis-acting elements in the 2000 bp upstream region of OsPDF gene promoters revealed numerous elements associated with abiotic stress response and hormone regulation. Furthermore, quantitative real-time PCR (qRT-PCR) data supported these findings, indicating that OsPDF1A and OsPDF1B were upregulated under low-temperature stress, and all three OsPDF genes were transcriptionally activated by heat, salt and UV-B stresses, indicating their active involvement in rice growth, development, and abiotic stress tolerance. In summary, OsPDFs exhibit significant functions in rice’s stress adaptation, growth, and development. This study not only enhances our understanding of the OsPDF gene family’s genomic, evolutionary, and functional characteristics, but also provides new perspectives and foundational data for further exploring their regulatory mechanisms in protein maturation and abiotic stress responses, as well as their potential applications in rice stress tolerance breeding. Full article

We report the fabrication and electrochemical characterization of TiO₂-based impedimetric sensors for the analysis of artificial sweat compositions. Two-electrode topologies were patterned on indium tin oxide (ITO) substrates: an interdigitated electrode (IDE) configuration and a Hilbert fractal electrode (HFE) geometry. TiO₂ thin films with thickness up to 350 nm were deposited by dip-coating and evaluated as photoactive sensing layers. The impedimetric response of the sensors was investigated by electrochemical impedance spectroscopy in artificial sweat with composition varied in terms of ionic content (0–100 mM Na⁺) and organic content (2.5–30 mM lactic acid and 5–50 mM urea). Regardless of TiO₂ thickness, the high-frequency response is predominantly governed by electrode topology, with the HFE design exhibiting up to 2.5-fold higher modulation compared to the IDE configuration. Under UV illumination, a low-frequency, photo-assisted response emerges, influenced by the TiO₂ layer thickness and primarily sensitive to the organic components of the solution, particularly lactic acid. These results suggest that frequency-resolved impedance measurements in TiO₂|ITO structures may enable partial differentiation between ionic conductivity and organic contributions in sweat, providing a promising basis for multi-parameter sweat analysis. Full article

Streptococcus suis is a serious zoonotic pathogen responsible for rapid progression and deadly infections in both humans and pigs. With an increasing number of reported cases and considering the limitations of standard routine identification, a simple, rapid, and cost-effective approach is needed. In this study, a label-free colorimetric assay based on gold nanoparticles (AuNPs) was applied with a specific aptamer, R8-su12. This assay offered simplified detection through observable color change, enabling visual analysis by the naked eye or assessment via UV–Vis spectrophotometry. Under the optimal assay conditions, the detection procedure was carried out within 45 min. The reaction of the aptasensor and other bacterial species, including Staphylococcus aureus, S. pneumoniae, S. pyogenes, Pseudomonas aeruginosa, Escherichia coli, Enterococcus faecium, and E. faecalis, was not present, indicating the specificity of this assay. Moreover, the aptasensor exhibited high sensitivity with a limit of detection (LOD) at 1 CFU of S. suis and had broad reactivity with S. suis serotypes 1, 1/2, 9, and 14, as well as with S. suis isolated from clinical specimens. Thus, this aptasensor demonstrates proof-of-concept feasibility including clinical sample testing before practical implementation. It holds promise as a practical tool for the early screening and outbreak management of S. suis in a variety of settings, such as clinical laboratories, food safety, and the environment. Full article

Hydralazine is widely used to treat hypertension during pregnancy and has epigenetic effects in cancer therapy. Cryoplatable human hepatocytes showed concentration-dependent increase in DNA damage response (linear trend p = 0.0069) following 24 h hydralazine treatment. DNA repair-deficient UV5 Chinese hamster ovary (CHO) cell lines expressing human CYP1A2 and either NAT2*4 (reference allele) or NAT2*5 (variant allele) were treated with hydralazine for 24 h. CHO cells expressing NAT2*4 showed a higher acetylation rate than those with NAT2*5 (p < 0.001), whereas CHO cell viability did not differ significantly following hydralazine treatment (p > 0.05). Hydralazine caused a concentration-dependent increase in DNA damage response in the un-transfected UV5 CHO cell line, as well as in each of the UV5 CHO cell lines transfected with human CYP1A2 and/or NAT2 alleles. CHO cells with CYP1A2 only showed higher DNA damage response from hydralazine compared to cells with CYP1A2/NAT2*4 or CYP1A2/NAT2*5 (p < 0.05 and p < 0.0001, respectively), and higher in CYP1A2/NAT2*4 versus CYP1A2/NAT2*5 cells (p = 0.0011). Apurinic/apyrimidinic (AP) sites in CHO cells expressing only CYP1A2 were significantly higher than in the un-transfected UV5 CHO cell line (p < 0.01) and higher in CHO cells expressing CYP1A2/NAT2*4 compared to CYP1A2/NAT2*5, but the difference was not significant (p > 0.05). In contrast, ROS levels were reduced following hydralazine treatment in CHO cells with CYP1A2/NAT2*4 and CYP1A2/NAT2*5 (p < 0.001 and p < 0.05, respectively). The results of the current study document DNA damage responses associated with hydralazine in human hepatocytes and CHO cells. The DNA damage response was increased following N-hydroxylation by CYP1A2, which competes with N-acetylation by NAT2. Full article

This study investigated the biosynthesis of magnetite nanoparticles mediated by chia mucilage (CM-Fe₃O₄ NPs) and their application in the co-encapsulation of Lactobacillus rhamnosus GG (LGG) using spray drying. CM-Fe₃O₄ NPs were synthesized by combining CM extract with iron salts, in which hydroxyl and carbonyl groups of CM acted as natural ligands for Fe²⁺/Fe³⁺ ions. A response surface design was applied to optimize synthesis parameters, focusing on size distribution and zeta potential, and confirming the influence of pH on colloidal stability. Characterization by FE-SEM, DLS, XRD, UV-Vis, and FTIR revealed spherical particles with an inorganic core (50–300 nm) and a hydrated organic coating (600–900 nm), consistent with a spinel structure functionalized by CM. Spray-drying encapsulation tests showed that incorporating CM-Fe₃O₄ NPs did not compromise bacterial viability, maintaining optimal moisture content and survival. Growth curves and confocal microscopy corroborated the physiological compatibility of the nanoparticles, with no alterations in LGG morphology or growth dynamics. Under simulated gastrointestinal conditions, co-encapsulated microcapsules exhibited slightly improved survival in the gastric phase and significantly greater viability in the initial intestinal phase. These results suggest that CM-Fe₃O₄ NPs modulate matrix degradation and promote controlled release, ensuring therapeutic concentrations of LGG in the intestine. Overall, the CM-Fe₃O₄ nanocomposite system integrates the protective properties of biopolymers with the functional advantages of iron nanoparticles, offering dual functionality: probiotic stabilization and potential iron supplementation. This innovative, food-grade approach supports the development of next-generation functional foods with combined therapeutic and nutritional benefits. Full article

In this work, we report the fabrication of SnO₂-based composite nanostructures in view of their application as a sensor element toward N₂O gas exposure. The samples were produced by laser ablation of a composite SnO₂-TiO₂ target performed in air at atmospheric pressure (in open air). We examined how the structure, morphology, composition, and physical properties of the samples change with the TiO₂ content being introduced into the SnO₂ target. The laser ablation of SnO₂-based targets in open air produced samples with a structure in which SnO₂ and SnO crystal phases co-existed, as the crystal phases were distinguished in separate nanoparticles. The nanoparticles formed a complex porous structure with oxygen-related defects. We investigated the gas-sensing properties of composite SnO₂-based sensor elements working under UV irradiation. The highest response to N₂O exposure and the fastest response/recovery times were demonstrated by the sensor element produced by the laser ablation of a composite target prepared by 10 wt% TiO₂ in SnO₂. Additionally, we found that a small amount (below 0.1 wt%) of noble metal (Pt) added to the sensor element substantially improved the gas sensor performance without inducing significant structural and/or morphological changes. Further, we explored how simultaneous irradiation of the sensor surface with UV and visible light changes the sensor properties. The best sensor performance toward N₂O exposure was achieved by irradiating the Pt-doped SnO₂-TiO₂ sensor surface simultaneously with UV and red lights. Full article

Hydroxycinnamoyl-CoA shikimate/quinate hydroxycinnamoyl transferase, a key acyltransferase in the phenylpropanoid pathway and a canonical member of the BAHD acyltransferase family (BAHD), catalyzes the formation of pivotal intermediates in the biosynthesis of secondary metabolites such as lignin, chlorogenic acid, and flavonoids. These compounds serve indispensable protective functions in terrestrial plants, underpinning their adaptive responses to abiotic stresses such as drought, ultraviolet (UV) radiation, and oxidative damage. Although the role of HCT/HQT in the core phenylpropanoid pathway has been extensively characterized, its precise functional contributions to the flavonoid biosynthetic branch—particularly with respect to substrate selectivity, kinetic regulation, and metabolic channeling—remain incompletely understood. This review systematically analyzes the structural features, spatial conformation, catalytic mechanism, and substrate promiscuity of HCT/HQT to clarify its molecular determinants of activity and specificity. Furthermore, it highlights regulatory factors influencing HCT/HQT gene expression, such as transcription factors (MYB, bHLH, WRKY), phytohormones (GA₃, Eth, MeJA, 6-BA, MT), and abiotic/biotic stressors (temperature, blue light, nitric oxide, nano-selenium). Collectively, these insights illuminate how plants dynamically fine-tune phenylpropanoid metabolism in coordination with developmental programs and environmental challenges. This work provides a foundation for further research on HCT/HQT and supports efforts to develop improved crop varieties through targeted regulation of this central metabolic node. Full article

Ultraviolet (UV) irradiation induces complex skin damage, including hyperpigmentation, oxidative stress, and alterations in proteins related to keratinocyte differentiation and epidermal barrier-associated status. This study investigated the multifunctional protective effects of Padina arborescens ethanolic extract (PAEE) against skin damage in melanocytes, keratinocytes, and zebrafish. In alpha-melanocyte-stimulating hormone (α-MSH)-stimulated B16F10 cells, PAEE effectively suppressed the protein kinase A (PKA)/cyclic adenosine monophosphate (cAMP) response element-binding protein (CREB) signaling pathway, which was associated with reduced expression of microphthalmia-associated transcription factor (MITF) and tyrosinase, leading to decreased melanin synthesis. PAEE also exhibited photoprotective properties by reducing reactive oxygen species (ROS), inhibiting interleukin-1 beta (IL-1β), and attenuating matrix metalloproteinase-1 (MMP-1) upregulation associated with UVB (ultraviolet B)-induced photodamage in HaCaT keratinocytes. Notably, PAEE restored the UVB-reduced expression of filaggrin and involucrin, representative markers of keratinocyte differentiation and epidermal barrier-associated status, in HaCaT keratinocytes. In zebrafish embryos, PAEE suppressed α-MSH-induced melanin accumulation and UVB-induced ROS generation at non-toxic concentrations. Taken together, these results suggest that PAEE exerts anti-melanogenic and photoprotective effects in cellular and zebrasfish models and may serve as a promising marine-derived ingredient for cosmeceutical applications targeting UVB-related skin damage. Full article

As one of the core technologies in modern national defense and security fields, infrared stealth technology aims to realize the controllable regulation of the radiation characteristics of targets in the infrared band. This paper focuses on a novel electrochromic device with a structure of WO₃/nickel mesh/Al³⁺-Zn²⁺gel electrolyte/zinc foil. The structural composition and working mechanism are systematically analyzed, and the infrared stealth regulation performance is emphatically studied. The WO₃ thin film and device structure were characterized by scanning electron microscopy (SEM). The infrared emissivity modulation and optical response properties of the device were measured using an infrared thermal imager and a UV-Vis-NIR spectrophotometer. The prepared WO₃ film exhibits a dense spherical morphology, indicating excellent uniformity and compactness. After 1000 cycles, the areal capacitance of the device remains 83.7% of its initial value, demonstrating good cycling stability. Under the voltage regulation of −0.1 V to 1.1 V, the emissivity ε of the device at the typical mid-wave infrared wavelength of 4.0 μm decreases from 0.89 (−0.1 V) to 0.67 (1.1 V), with an absolute modulation amplitude Δε of 0.22. At the typical long-wave infrared wavelength of 8.7 μm, ε decreases from 0.96 (−0.1 V) to 0.69 (1.1 V), with an absolute modulation amplitude Δε of 0.29. The electrochromic switching times for coloring and bleaching are 10.1 s and 2.44 s, respectively. According to infrared thermal imaging tests, in the temperature range of 30–40 °C, the surface temperature difference ΔT between the colored state and bleached state increases from 4.3 °C to 4.6 °C. The maximum regulation amplitude reaches 4.6 °C at 40 °C. The device achieves efficient regulation of infrared emissivity through the electrochromic effect, providing a new device design strategy for infrared stealth technology. Full article

Magneto-fluorescent carbon quantum dots (CQDs) promise compact, dual-readout nanomaterials; however, achieving pronounced photoluminescence alongside magnetic functionality in a simple, scalable formulation remains difficult, especially for emerging doped CQDs. Here, we report Fe-doped carbon quantum dots (Fe-CQDs) as an emerging quantum-dot platform that integrates fluorescence with magnetic-resonance (MR) relaxometry within a single ultrasmall, carbonaceous nanostructure. To enable this, Fe-CQDs are prepared through a straightforward two-step, low-temperature route that uses a magnetic deep eutectic solvent precursor followed by mild carbonization in air at atmospheric pressure. Under UV excitation, the Fe-CQDs display bright blue emission centered at 439 nm, and their optical behavior is characterized by UV-Vis absorption, photoluminescence spectroscopy, and fluorescence microscopy. Meanwhile, dynamic light scattering indicates a narrowly distributed nanoscale hydrodynamic diameter, and X-ray diffraction together with FT-IR supports a carbonaceous framework enriched with oxygenated surface functionalities, consistent with aqueous dispersibility and environmentally responsive photophysics in water, while XPS supports Fe incorporation in an Fe(III)-dominated chemical environment. Importantly, Fe incorporation enables intrinsic MR relaxometric readout, establishing an intrinsic fluorescence/MR dual modality. As a proof-of-concept, Fe-CQDs were tested with a representative per- and polyfluoroalkyl substance (PFAS), showing parallel fluorescence and MR response trends at ppm levels in natural water matrices from Millerton Lake with Stern–Volmer analysis and a NaCl-based ionic strength control. Overall, these results position Fe-CQDs as a versatile magneto-fluorescent nanomaterial for dual-readout screening workflows and motivate future surface engineering and dopant tuning to improve selectivity and expand toward multi-modal readouts. Full article

Heterogeneous photocatalysis is one of the most versatile and widely studied photochemical approaches for the degradation of recalcitrant pollutants. Owing to its favorable physicochemical properties, titanium dioxide (TiO₂) remains one of the most investigated semiconductor photocatalysts. However, its wide band-gap energy (3.2 eV) restricts its photoactivity to the UV region, which represents only a small fraction of the solar spectrum. A major challenge in this field is therefore the development of TiO₂-based materials capable of operating efficiently under visible light irradiation, enabling the use of solar energy as a sustainable primary source. Several strategies have been explored to extend the optical response of TiO₂, among which elemental doping remains one of the most effective and commonly applied. In this work, we conducted systematic comparative analysis to evaluate the photocatalytic performance of TiO₂ modified through different doping approaches. Sixty-one scientific reports published between 2015 and 2025 were analyzed, comparing three categories of dopants: (i) metal dopants, (ii) non-metal dopants, and (iii) co-doping systems. In the first section, we discuss fundamental concepts of photocatalysis and recent advances in doping strategies and surface modifications aimed at enhancing the photocatalytic performance of TiO₂. In the second section, we present a comparative analysis based on 61 scientific reports focusing on TiO₂ doping and co-doping processes. Finally, this study summarizes the different categories of doped TiO₂ photocatalysts by comparing the photocatalytic performance employing an alternative performance metric. Full article

Background/Objectives: Atopic dermatitis (AD) is associated with gut dysbiosis linked to early-life antibiotic use and Staphylococcus aureus colonization. Gum Arabic (GA), a prebiotic, may modulate this dysbiosis and influence AD-related microbial balance. This study evaluated whether GA could support AD-associated probiotics-Lactobacillus casei, Bifidobacterium bifidum, and Bifidobacterium infantis-under amoxicillin- or azithromycin-containing conditions, examined the response of S. aureus under the same screening conditions, and developed GA-phospholipid-based semisolid carriers for topical application. Methods: Probiotic strains were cultured with 1–5% GA in the presence and absence of antibiotics, and viable cell counts were assessed. Sixteen topical formulations containing propylene glycol or isopropyl myristate in a hydrogenated phosphatidylcholine base were prepared and screened for rheological properties and galactose release using in vitro release testing (IVRT) and HPLC-UV. Results: GA at 1–2% concentrations promoted probiotic growth in antibiotic-free conditions. GA preserved B. infantis viability under azithromycin exposure in this in vitro screening model. For S. aureus, numerical CFU differences were observed between antibiotic-only and GA-containing conditions; however, the present screening design was not intended to determine antibiotic interaction outcomes. Formulations F14 (2% GA + 7% IPM) and F15 (3% GA + 7% IPM) exhibited optimal spreadability. IVRT showed that 6 h cumulative galactose release varied by formulation (F6 > F10 > F14 > F15). Conclusions: GA demonstrated dose-dependent prebiotic activity and preserved B. infantis viability under azithromycin exposure in this in vitro screening model. For S. aureus, the observed CFU differences between antibiotic-only and GA-containing conditions should be considered exploratory only and do not allow for conclusions regarding interference with antibiotic efficacy. Optimized GA-HPC systems with suitable rheological and release characteristics represent promising candidates for further preclinical investigation. Full article