Search Results (85)

Lamb waves offer a series of desirable features for Structural Health Monitoring (SHM) applications, such as the ability to detect small defects, allowing to detect damage at early stages of its evolution. On the downside, their propagation through media with multiple geometrical features results in complicated patterns, which complicate the task of damage detection, thus hindering the realization of their full potential. This is exacerbated by the fact that numerical models for Lamb waves, which could aid in both the prediction and interpretation of such patterns, are computationally expensive. The present paper provides a flexible surrogate to rapidly evaluate the sensor response in scenarios where Lamb waves propagate in plates that include multiple features or defects. To this end, an offline–online ray tracing approach is combined with Frequency Response Functions (FRFs) and transmissibility functions. Each ray is thereby represented either by a parametrized FRFs, if the origin of the ray lies in the actuator, or by a parametrized transmissibility function, if the origin of the ray lies in a feature. By exploiting the mechanical properties of propagating waves, it is possible to minimize the number of training simulations needed for the surrogate, thus avoiding the repeated evaluation of large models. The efficiency of the surrogate is demonstrated numerically, through an example, including different types of features, in particular through holes and notches, which result in both reflection and conversion of incident waves. For most sensor locations, the surrogate achieves an error between 1% and 4%, while providing a computational speedup of three to four orders of magnitude. Full article

Arthropod-borne viruses (arboviruses) represent a growing concern for global public and veterinary health, with cases reported across all continents. This review presents a broad overview of the geographic distribution of arboviruses transmitted by insect vectors, emphasizing the importance of early viral detection as a cornerstone of surveillance and outbreak preparedness. Special attention is given to the phenomenon of zoonotic spillover, where viruses maintained in natural transmission cycles often involving wildlife reservoirs and arthropod vectors cross into human populations, triggering emergent or re-emergent outbreaks. This article discusses key arboviral families of medical and veterinary significance, including Togaviridae, Flaviviridae, Nairoviridae, Phenuiviridae, Peribunyaviridae, and Orthomyxoviridae, highlighting their molecular and structural characteristics. These features are essential for guiding the development and implementation of specific and sensitive detection strategies. In addition, this work provides a comparative analysis of diverse laboratory methodologies for viral detection in vectors. From serological assays and viral isolation to advanced molecular tools and next-generation sequencing, we explore their principles, practical applications, and context-dependent advantages and limitations. By compiling this information, we aim to support researchers and public health professionals in selecting the most appropriate tools for vector surveillance, ultimately contributing to improved response strategies in the face of arboviral threats. Full article

Black soybeans have numerous health benefits owing to their high polyphenolic content, antioxidant activity, and antitumor effects. We previously reported that the Korean black soybean cultivar ‘Soman’ possesses higher anthocyanin and isoflavone contents and superior antioxidant potential than other Korean black soybean cultivars and landraces (Seoritae) do. Here, we investigated and compared the antitumor effects of Soman and Seoritae and aimed to elucidate the possible mechanisms of action. Soman inhibited cancer cell proliferation and was more potent than Seoritae. Mechanistically, Soman inhibited the phosphorylation of the signal transducer and activator of transcription (STAT1, 3, and 5) in a reactive oxygen species (ROS)-independent manner, subsequently decreasing glycolytic enzyme expression and the activities of pyruvate kinase and lactate dehydrogenase. Thus, Soman suppressed glucose uptake, lactate production, and ATP production in cancer cells. Additionally, it inhibited tumor growth in a B16F10 murine melanoma syngeneic model, accompanied by reduced STAT1 phosphorylation and decreased proliferation in Soman-treated mice, more potently than observed in Seoritae-treated mice. These findings showed that Soman exerted superior antitumor activities by suppressing STAT-mediated aerobic glycolysis and proliferation. Overall, our findings demonstrate the potent, tumor-suppressive role of Soman in human cancer and uncover a novel molecular mechanism for its therapeutic effects in cancer treatment. Full article

Repressor element-1 silencing transcription factor or neuron-restrictive silencer factor (REST/NRSF) is an extensively studied neuronal gene regulator both in neuronal cells and non-neuronal cells. Even though the role of REST in host cellular gene regulation is well established, its role in the establishment of viral infections and its capability to stabilize and destabilize such viral infections are scarcely studied. Co-repressor and DNA modifiers are involved in REST-mediated repressive action of its target genes. The role of REST and co-repressors together or individually in the regulation of viral as well as host genes has been unraveled in a few viruses such as HIV and influenza as well as two of the herpesvirus family members, namely herpes simplex virus type 1 (HSV-1) and Kaposi’s sarcoma-associated herpesvirus (KSHV). Here, we summarize all such virus studies involved with REST to gain a better insight into REST biology in virus infections. We also focus on unraveling the possible RE-1 binding sites in the Epstein–Barr virus (EBV) genome, a well-known human oncogenic herpesvirus that is associated with infectious mononucleosis and neoplasms such as B-cell lymphomas, nasopharyngeal carcinoma, gastric carcinoma, etc. An in silico-based approach was employed towards the prediction of such possible RE-1 binding elements in the EBV genome. This review advances the present knowledge of REST in virus infection which will aid in future efforts towards a better understanding of how REST acts in herpesviruses and other viruses for their infections and pathogenesis. Full article

Di-isopropyl methyl phosphonate (DIMP) has no major commercial uses but is a by-product or a precursor in the synthesis of the nerve agent sarin (GB). Also, DIMP is utilized as a simulant compound for the chemical warfare agents sarin and soman in order to test and calibrate sensitive IMS instrumentation that warns against the deadly chemical weapons. DIMP was measured from 2 ppb_v (15 μg m⁻³) to 500 ppb_v in the air using a pocket-held ToF ion mobility spectrometer, model LCD-3.2E, with a non-radioactive ionization source and ammonia doping in positive ion mode. Excellent sensitivity (LoD of 0.24 ppb_v and LoQ of 0.80 ppb_v) was noticed; the linear response was up to 10 ppb_v, while saturation occurred at >500 ppb_v. DIMP identification by IMS relies on the formation of two distinct peaks: the monomer M·NH₄⁺, with a reduced ion mobility K₀ = 1.41 cm² V⁻¹ s⁻¹, and the dimer M₂·NH₄⁺, with K₀ = 1.04 cm² V⁻¹ s⁻¹ (where M is the DIMP molecule); positive reactant ions (Pos RIP) have K₀ = 2.31 cm² V⁻¹ s⁻¹. Quantification of DIMP at trace levels was also achieved by GC-MS over the concentration range of 1.5 to 150 μg mL⁻¹; using a capillary column (30 m × 0.25 mm × 0.25 μm) with a TG-5 SilMS stationary phase and temperature programming from 60 to 110 °C, DIMP retention time (RT) was ca. 8.5 min. The lowest amount of DIMP measured by GC-MS was 1.5 ng, with an LoD of 0.21 μg mL⁻¹ and an LoQ of 0.62 μg mL⁻¹ DIMP. Our results demonstrate that these methods provide robust tools for both on-site and off-site detection and quantification of DIMP at trace levels, a finding which has significant implications for forensic investigations of chemical agent use and for environmental monitoring of contamination by organophosphorus compounds. Full article

Stingless bees are vital pollinators in tropical and neotropical regions, emphasizing the need to conserve these species. However, resource scarcity, particularly pollen, during certain periods negatively impacts bee health and pollination efficiency. To address this, we developed a fermented protein feed using microorganisms from pollen of Melipona quadrifasciata, a species commonly found in the Brazilian Atlantic Forest. The fermented feed consisted of a protein bran mixture, sugar syrup, and an inoculant derived from species’ fermented pollen. To assess the feed quality, nutritional evaluation and metabolomic analyses were conducted (UHPLC/DAD-HRMS/MS and GC-MS). The metabolomic analysis identified 85 compounds in positive and 102 in negative ionization modes. Shared metabolites, such as isoquercetin and palatinose, highlighted similarities between the feed and natural fermented pollen. Laboratory tests with caged bees showed comparable consumption between the feed and fermented pollen with no statistical difference (mean: 0.067 g vs. 0.060 g; p = 0.53). The feed exhibited a favorable pH transition (5.30 pre-fermentation to 4.41 after the fermentation process) and remained stable for six months at ±2 °C. These findings demonstrate a biotechnological advance in stingless bee nutrition, offering a viable solution during resource scarcity and promoting the health of M. quadrifasciata. Full article

Guided waves (GW) allow fast inspection of a large area and hence have received great interest from the structural health monitoring (SHM) community. Fiber Bragg grating (FBG) sensors offer several advantages but their use has been limited for the GW sensing due to its limited sensitivity. FBG sensors in the edge-filtering configuration have overcome this issue with sensitivity and there is a renewed interest in their use. Unfortunately, the FBG sensors and the equipment needed for interrogation is quite expensive, and hence their number is restricted. In the previous work by the authors, the number and location of the actuators was optimized for developing a SHM system with a single sensor and multiple actuators. But through the use of the phenomenon of acoustic coupling, multiple locations on the structure may be interrogated with a single FBG sensor. As a result, a sensor network with multiple sensing locations and a few actuators is feasible and cost effective. This paper develops a two-step methodology for the optimization of an actuator–sensor network harnessing the acoustic coupling ability of FBG sensors. In the first stage, the actuator–sensor network is optimized based on the application demands (coverage with at least three actuator–sensor pairs) and the cost of the instrumentation. In the second stage, an acoustic coupler network is designed to ensure high-fidelity measurements with minimal interference from other bond locations (overlap of measurements) as well as interference from features in the acoustically coupled circuit (fiber end, coupler, etc.). The non-sorting genetic algorithm (NSGA-II) is implemented for finding the optimal solution for both problems. The analytical implementation of the cost function is validated experimentally. The results show that the optimization does indeed have the potential to improve the quality of SHM while reducing the instrumentation costs significantly. Full article

Driving stress is a multifaceted phenomenon, and the experience of driving invokes stress. Driving causes the activation of stress-response mechanisms, leading to short-term and long-term stress responses resulting in physiological and behavioral changes. The aim of this study was to evaluate driving stress-initiated effects on orofacial functions and health behaviors in the Riyadh population. A cross-sectional survey was conducted in Riyadh using a pre-validated set of questionnaires for habitual information, a driving stress assessment using a driving-behavior inventory, and an assessment of parafunctional habits and effects on orofacial functions. The results indicate that nearly 50% of the sample spends more than two hours commuting, and more than 50% of the sample has inadequate sleep and insufficient exercise. Oral parafunctional habits like nail biting (p = 0.039) and lip or object biting (p = 0.029) had a significant correlation with aggressive driving behaviors, whereas the grinding of teeth (p = 0.011), the clenching of jaws (p = 0.048), lip or object biting (p = 0.018), and pain in mastication (p = 0.036) had a positive correlation with driving dislikes. Driving stress can be detrimental to one’s health and not only impacts health behaviors but also induces oral parafunctional habits and adversely affects orofacial regions and functions. Acute driving stress responses may be transient. However, prolonged driving stress can be maladaptive and can increase the risk of chronic diseases including chronic temporomandibular joint disorders and parafunctional habit-related changes in the oral cavity. Full article

The anatomical position of the nasopalatine canal in the anterior maxilla makes it one of the most important vital structures in the region. Surgical and implant procedures in this area require local anesthesia to be administered. It is, therefore, important to morphologically assess the length and shape of the nasopalatine canal for performing surgical procedures with more accuracy in this area. Cone-Beam Computed tomography scans were scrutinized using inclusion criteria of age 18 years and above, absence of any pathological lesions/fracture/surgery in the nasopalatine area, absence of orthodontic treatment or maxillary jaw correction surgeries, and exclusion criteria including CBCT scans with artifacts or error s in the area of interest, anterior implants, absence of bone diseases, trauma, surgeries, and impactions in the area of interest. A total of 360 scans were analyzed for the length and shape of the nasopalatine canals. The results of the study showed that the mean nasopalatine canal length was 12.51 mm. The hourglass shape of the canal was most common and had the highest representation in both genders, with male 80.62% and female 87.01%. A statistically significant difference (p < 0.001) was noted in nasopalatine canal length between males and females. The study provides insight into the significant association of gender with the canal’s shape and length of the canal. The length of the canal does not influence with age. These parameters are helpful for surgical planning and interventions in the anterior maxillary region. Full article

Microorganisms (MOs) are prominent in ecological functioning and balance. The rhizosphere is considered one of the most diverse ecosystems on Earth and serves as a breeding spot for many MOs. Rhizosphere microbial diversity changes according to plant species, genotype, and the nature of the soil. The current study reports the possible use of bacteria isolated from the rhizosphere of Azadirachta indica for synthesizing silver nanoparticles (AgNPs). The physicochemical characterization and antibacterial activity of these green synthesized AgNPs are also reported. The gene (16S rRNA) sequence of bacteria isolated from the rhizosphere showed a maximum similarity of 99.25% with Bacillus subtilis. After incubation, the colorless reaction mixture transformed to brown, which indicates the formation of AgNPs, and UV-vis spectral analysis also confirmed the biosynthesis of AgNPs. Compared to lower temperatures, the efficiency of AgNP synthesis was high at the higher temperature. The scanning electron microscope image demonstrated spherical-shaped AgNPs with sizes ranging from 18 to 21 nm. Energy-dispersive X-ray analysis established the elemental analysis of synthesized AgNPs. The synthesized AgNPs showed strong bactericidal properties against pathogenic bacteria Klebsiella pneumonia, Pseudomonas aeruginosa, Escherichia coli, and methicillin-resistant Staphylococcus aureus. Full article

MXenes are two-dimensional transition metal carbides, nitrides, and carbonitrides that have become important materials in nanotechnology because of their remarkable mechanical, electrical, and thermal characteristics. This review emphasizes how crucial MXene conjugates are for several biomedical applications, especially in the field of cancer. These two-dimensional (2D) nanoconjugates with photothermal, chemotherapeutic, and photodynamic activities have demonstrated promise for highly effective and noninvasive anticancer therapy. MXene conjugates, with their distinctive optical capabilities, have been employed for bioimaging and biosensing, and their excellent light-to-heat conversion efficiency makes them perfect biocompatible and notably proficient nanoscale agents for photothermal applications. The synthesis and characterization of MXenes provide a framework for an in-depth understanding of various fabrication techniques and their importance in the customized formation of MXene conjugates. The following sections explore MXene-based conjugates for nanotheranostics and demonstrate their enormous potential for biomedical applications. Nanoconjugates, such as polymers, metals, graphene, hydrogels, biomimetics, quantum dots, and radio conjugates, exhibit unique properties that can be used for various therapeutic and diagnostic applications in the field of cancer nanotheranostics. An additional layer of understanding into the safety concerns of MXene nanoconjugates is provided by detailing their toxicity viewpoints. Furthermore, the review concludes by addressing the opportunities and challenges in the clinical translation of MXene-based nanoconjugates, emphasizing their potential in real-world medical practices. Full article

The development of electronic systems and wireless communication has led to a proportional increase in data traffic over time. One potential solution for alleviating data congestion is to augment the bandwidth capacity. This study presents a novel asymmetric circular slotted semi-circle-shaped monopole antenna design using a defective ground structure. The extended ultrawide bandwidth is achieved by implementing a design where the semi-circle radiator is etched in a specific asymmetric circular slot. This involves etching a circle with a radius of 1.25 mm at the center of the radiator, as well as a succession of circles with a radius of 0.75 mm along the edges of the radiator. In addition, the ground plane is situated at a lower elevation and features a U-shaped truncation that has been etched onto its surface. The expansion of the impedance bandwidth can be accomplished by making adjustments to the radiator and ground plane. The UWB antenna under consideration possesses a geometric configuration of 21.6 × 20.8 × 1.6 mm³ and the antenna is fabricated using an FR-4 glass epoxy substrate. The UWB antenna operates throughout the frequency range of 2.2–16.5 GHz, exhibiting a gain of at least 3.45 dBi across the entire impedance bandwidth and the maximum peak gain of 9.57 dBi achieved at the mid-resonance frequency of 10.5 GHz. The investigation of the antenna’s physical properties is conducted utilizing characteristic mode analysis. The investigation also includes an analysis of the time-domain characteristics, revealing that the group delay was found to be less than 1 ns across the operational frequency range. The predicted and measured findings demonstrate consistency and confirm that the suggested antenna is suitable for electronic systems and wireless applications. Full article

Dried urine spot (DUS) is a micro-sample collection technique, known for its advantages in handling, storage and shipping. It also uses only a small volume of urine, an essential consideration in working with small animals, or in acute medical situations. Alkyl-phosphonic acids are the direct and indicative metabolites of organophosphorus chemical warfare agents (OP-CWAs) and are present in blood and urine shortly after exposure. They are therefore crucially important for monitoring casualties in war and terror scenarios. We report here a new approach for the determination of the metabolites of five CWAs in urine using DUS. The method is based on a simple and rapid sample preparation, using only 50 µL of urine, spotted and dried on DBS paper, extracted using 300 µL methanol/water and analyzed via targeted LC-MS/MS. The detection limits for the five CWAs, sarin (GB), soman (GD), cyclosarin (GF), VX and RVX in human urine were from 0.5 to 5 ng/mL. Recoveries of (40–80%) were obtained in the range of 10–300 ng/mL, with a linear response (R² > 0.964, R > 0.982). The method is highly stable, even with DUS samples stored up to 5 months at room temperature before analysis. It was implemented in a sarin in vivo exposure experiment on mice, applied for the time course determination of isopropyl methylphosphonic acid (IMPA, sarin hydrolysis product) in mice urine. IMPA was detectable even with samples drawn 60 h after the mice’s (IN) exposure to 1 LD₅₀ sarin. This method was also evaluated in a non-targeted screening for multiple potential CWA analogs (LC-Orbitrap HRMS analysis followed by automatic peak detection and library searches). The method developed here is applicable for rapid CWA casualty monitoring. Full article

Dyes have played a pivotal role in the advancement of modern dye-sensitized solar cells (DSCs), as they not only facilitate light harvesting, but also serve as blocking layers to impede recombination. In this study, we conducted a systematic investigation to elucidate the influence of dye coverage on the photovoltaic parameters of copper-electrolyte-based DSCs by precisely controlling the dye coverage on the TiO₂ substrate using D35 organic dye solutions with varying concentrations. The dye loading increased proportionally with the increase in dye concentrations until it reached saturation at a concentration of 0.2 mM. However, an optimal dye concentration of 0.1 mM was determined in terms of achieving the highest photovoltaic performance, under both outdoor and indoor light conditions. Notably, a maximum power conversion efficiency (PCE) of 6.50 ± 0.25% under outdoor illumination (100 mW/cm²) and 10.48 ± 0.30% under indoor light (1000 lux, WW CFL) was attained using a 0.1 mM D35 dye concentration. Additionally, the dark current and ideality factor (m) were found to be minimized at the 0.1 mM dye concentration. Furthermore, the ideality factor (m) exhibited disparities between indoor and outdoor light conditions. The lifetime obtained from electrochemical impedance spectroscopy (EIS) measurements correlated well with the ideality factor (m) and dark current. Notably, electron injection, dye regeneration, charge collection, and ion diffusion were observed to be independent of the dye coverage. Full article

Chemical agents pose a significant threat to social security, highlighting the crucial role of representative chemical agents adsorption in ensuring the safety our environment. This study explored the application of Magnetic Graphene Oxide Nanoplatelet Composites (MGONCs) in adsorbing the representative chemical agents such as Lewisite (L), O-ethyl S-2-diisopropylaminoethyl methylphosphonothiolate (VX), Sarin (GB), and Soman (GD). MGONCs were synthesized through a physical blending method, with the combination of graphene oxide (GO) and Fe₃O₄ nanoparticles at a mass ratio of 1:1. Optimization of the adsorption process involved investigating the effects of contact time, temperature, and adsorbent dosage. Remarkably, the adsorption rate of L and VX exceeded 99% when the dosage of MGONCs was 2.5 mg, with a contact time of 30 s at room temperature. Furthermore, GB and GD achieved maximum adsorption rates after a contact time of 20 min, with the dosages of MGONCs at 10 mg and 20 mg, respectively. Characterization of the magnetic composite was accomplished through XRD, TEM, VSM, FTIR, TGA, and BET analyses. Kinetical analysis revealed that the adsorption mechanism of GB and GD on MGONCs followed pseudo-second-order (PSO) kinetics, exhibiting a high regression coefficient. The calculated ${\mathrm{q}}_{\mathrm{e}}$ values were 0.103125 mg/g and 0.081349 mg/g, respectively. This research demonstrated the feasibility of utilizing MGONCs as highly efficient adsorbents for representative chemical agents, particularly in on-site sampling scenarios. Full article