Search Results (382)

Melamine sponges have demonstrated significant application potential in the field of adsorption materials due to their unique three-dimensional porous network structure, excellent chemical/mechanical stability, and abundant amino active sites on the surface. However, the development of modified melamine sponges with efficient Congo red dye removal capabilities remains a substantial challenge. In this study, a stable linear polymer network structure was constructed on the surface of melamine sponges via an in situ polymerization strategy based on the Schiff base reaction mechanism. Characterization analyses reveal that the modified sponge not only retained the original porous skeleton structure but also significantly enhanced the density of surface active sites. Experimental data demonstrate that the modified sponge exhibited excellent adsorption performance for Congo red dye, with the adsorption process conforming to the pseudo-second-order kinetic model and achieving a practical maximum adsorption capacity of 380.4 mg/g. Notably, the material also displayed favorable cyclic stability. This study provides an efficient adsorbent for Congo red dye-contaminated wastewater treatment through the development of a novel surface-functionalized sponge material while also offering new solutions for advancing the practical applications of melamine-based porous materials and environmental remediation technologies. Full article

Nocardia spp. are opportunistic pathogens of humans, domestic animals, and wildlife that can cause high levels of morbidity and mortality. Here, we present a unique case of nocardial airsacculitis in a free-ranging mallard (Anas platyrhynchos) from Arizona, USA, and compare it to the hosts, geographic distribution, diagnostic methodology, and infection site of known nocardiosis cases in birds. A gross necropsy, histopathology, and bacterial culture were performed. There were no gross findings associated with the nocardiosis. Histopathology showed multiple granulomas expanding the air sac with intralesional filamentous bacteria that were Grocott’s methenamine silver-positive, Fite–Faraco and Ziehl–Neelsen acid-fast, positive with the Periodic acid–Schiff reaction, and variably Gram-positive. The organism was isolated in culture and identified as Nocardia cyriacigeorgica based on the sequencing of a 463 bp portion of the 16S rRNA gene. While reports of nocardiosis in the class Aves are rare and some are possibly misdiagnosed due to limited diagnostics, cases are reported globally, sometimes resulting in epizootics. More information is needed to understand whether immunosuppression plays a role in disease development in birds. Known to be an emerging pathogen in humans, N. cyriacigeorgica can be considered as a differential diagnosis for pulmonary and potentially cutaneous or disseminated infections in birds. Full article

Chiral covalent organic frameworks (COFs) hold great promise in heterogeneous asymmetric catalysis due to their designable structures and well-defined chiral microenvironments. However, precise control over the pore size of chiral COFs to optimize asymmetric catalytic performance remains challenging. Herein, we designed a proline-derived dihydrazide chiral monomer (L-DBP-Boc), which was subjected to Schiff-base reactions with two aromatic aldehydes of different lengths, 1,3,5-triformyl phloroglucinol (BTA) and 4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (TZ), to construct two hydrazone-linked chiral COFs with distinct pore sizes (L-DBP-BTA COF and L-DBP-TZ COF). Interestingly, the Boc protecting groups were removed in situ during COF synthesis. We systematically investigated the catalytic performance of these two chiral COFs in asymmetric aldol reactions and found that their pore sizes significantly influenced both catalytic activity and enantioselectivity. The large-pore L-DBP-TZ COF (pore size: 3.5 nm) exhibited superior catalytic performance under aqueous conditions at room temperature, achieving a yield of 98% and an enantiomeric excess (ee) value of 78%. In contrast, the small-pore L-DBP-BTA COF (pore size: 2.0 nm) showed poor catalytic performance. Compared to L-DBP-BTA COF, L-DBP-TZ COF demonstrated a 1.69-fold increase in yield and a 1.56-fold enhancement in enantioselectivity, possibly attributed to the facilitated diffusion and transport of substrates and products within the larger pore, thus improving the accessibility of active sites. This study presents a facile synthesis of pyrrolidine-functionalized chiral COFs and establishes the possible structure–activity relationship in their asymmetric catalysis, offering new insights for the design of efficient chiral COF catalysts. Full article

Polyimine-based composites have emerged as a promising class of dynamic covalent thermosets, combining high mechanical strength, thermal stability, self-healing, recyclability, and reprocessability. This review systematically summarizes recent advances in polyimine synthesis, highlighting dynamic covalent chemistry (DCC) strategies such as imine exchange and reversible Schiff base reactions. Structural customization can be achieved by incorporating reinforcing phases such as carbon nanotubes, graphene, and bio-based fibers. Advanced fabrication methods—including solution casting, hot pressing, and interfacial polymerization—enable precise integration of these components while preserving structural integrity and adaptability. Mechanical performance analysis emphasizes the interplay between dynamic bonds, interfacial engineering, and multiscale design strategies. Polyimine composites exhibit outstanding performance characteristics, including a self-healing efficiency exceeding 90%, a tensile strength reaching 96.2 MPa, and remarkable chemical recyclability. Emerging engineering applications encompass sustainable green materials, flexible electronics, energy storage devices, and flame-retardant systems. Key challenges include balancing multifunctionality, enhancing large-scale processability, and developing low-energy recycling strategies. Future efforts should focus on interfacial optimization and network adaptivity to accelerate the industrial translation of polyimine composites, advancing next-generation sustainable materials. Full article

High and large-spectrum antibacterial features and ROS scavenging properties are the most important requirements for efficient wound-dressing materials. A composite hydrogel was synthesized herein by a one-pot procedure embedding silver nanoparticles (AgNPs) covered with oxidized gum arabic (OGA) within gelatin (Gel) hydrogel. Small (2–20 nm), round-shaped AgNPs (ζ = −22 mV) were first obtained by green synthesis using OGA as a reducing and capping agent. Composite hydrogels, containing 0.6 and 1.3 wt.% Ag, were obtained by the covalent cross-linking (Schiff base reaction) of amine groups in gelatin with the dialdehyde groups located on the shell of the AgNPs. Thus, the uniform distribution of the AgNPs in the network contributed to the increased physicochemical and hydrolytic stability of the hydrogels. Moreover, the high swelling degree together with the good mechanical properties make them appropriate candidates for wound-healing materials. The hydrogels exhibited 80% scavenging activity of ABTS^●+ free radicals after 6 h of incubation and were effective against E. coli and S. aureus, achieving a 4% survival of bacteria within 3 h (E. coli) and 24 h (S. aureus). These results clearly indicate that the proposed hydrogels have potential in wound-dressing applications. Full article

Implant-associated infections (IAIs) are major complications in dental and orthopedic implants, potentially compromising osseointegration and eventually causing implant loosening or removal. Thus, early prevention of bacterial adhesion and biofilm formation is critical for successful long-term osseointegration. Polyetheretherketone (PEEK) exhibits excellent physicochemical properties and an elastic modulus similar to bone tissue, making it a promising material for dental and orthopedic implants. However, its inherent lack of antibacterial properties limits its ability to prevent IAIs. Herein, an antibacterial coating with controlled drug release and excellent biocompatibility is designed by immobilizing minocycline (Mino)-doped carboxymethyl chitosan (CMCS) onto the PEEK surface via a polydopamine (PDA)-mediated Michael addition and Schiff base reaction. The coating is characterized by SEM, XPS, water contact angle measurements, and in vitro Mino release assays. Antibacterial activity is evaluated using the zone of inhibition (ZOI), turbidity, and colony counting assays, while biocompatibility is assessed through a SEM analysis of cell morphology and CCK-8 assay. The results show that the Mino-modified coating is successfully fabricated on the PEEK surface, achieving sustained Mino release for up to 14 days. Among the three Mino concentrations, the PEEK-0.5Mino group demonstrates the best balance of antibacterial activity and biocompatibility, highlighting its potential for preventing IAIs in orthopedic and dental applications. Full article

Background/Objectives: A sustainable inflammatory response is a significant obstacle for diabetic wound care. In this study, the pH-sensitive multifunctional hydrogel ODex/BSA-Zn was fabricated via a Schiff base and coordination force for the first time. Methods: The hydrogel consisted of oxidized dextran (ODex), bovine serum albumin (BSA), and zinc ions (Zn²⁺) in the absence of an additional crosslinking agent. Results: The hydrogel showed excellent mechanical stability, fast self-healing ability, and significant anti-inflammatory effects, as demonstrated by the formation of dynamic covalent bonds between the aldehyde group (-CHO) of ODex and the amino group (-NH₂) of BSA via the Schiff base reaction, as well as the metal-ion coordination reaction of Zn²⁺ with the imidazole ring of BSA. In a diabetic mouse full-thickness cutaneous defect wound model, the ODex/BSA-Zn hydrogel could effectively inhibit the inflammatory response and increase collagen deposition, thereby accelerating the transition of macrophage M1 to M2 and promoting wound closure. This study offers a promising therapeutic approach for managing long-term diabetic ulcers. Full article

Four silane-containing Schiff base oligomers (o-SBNs and o-SBBs) were synthesized by high-temperature polycondensation reactions using silicon-based dialdehydes with naphthalene and 1,1’-binaphthalene diamine derivates. The samples showed a moderate solubility in common organic solvents, where the incorporation of TPS cores into o-SBN2 allows the formation of highly soluble material in non-polar solvents with higher molecular weights (11.58 kDa) and polydispersity. All oligo-SBs displayed high thermal resistance (above 450 °C), showing enhanced thermal stability for TPS-containing oligomers, with the degradation temperature exceeding 530 °C (o-SBB2) and high T_g values due to the higher aromatic content granted by TPS and 1,1’-binaphthalene moieties. Optical results of the oligo-SBs showed broad absorption and emission behavior in the visible spectrum, ranging from deep blue (o-SBN1 and o-SBB1) to blue (o-SBN2 and o-SBB2). The structure promotes a clear bathochromic shift for TPS-based oligomers, attributed to an extended π-conjugation across the backbone. In addition, the π-π overlap effect highlights larger Stokes shifts for the DMS core oligomers o-SN2 (133 nm) and o-SBB1 (195 nm). The oligo-SBs were found to be wide-bandgap materials, with E_g^opt values in the range of 2.60 eV to 3.67 eV. The higher molecular weight of o-SBN2, which provided an extended π-conjugation, allows the lowest value of E_g^opt (2.60 eV) to be achieved. In addition, DFT, TDDFT and EDDM calculations were performed on trimeric oligo-SBs, revealing that HOMOs are localized in the amine-terminal fraction, while LUMOs are localized over the terminal aldehyde groups. These findings highlight the used DMS and TPS cores in Schiff base materials, providing valuable insights into fine-tuning physicochemical properties through the use of suitable building blocks and their potential as optoelectronic materials. Full article

Two iron(III) spin crossover complexes [Fe(⁵Cl-L)(NCS)] (1) and [Fe(⁵Cl-L)(NCSe)] (2) were synthesized with the pentadentate Schiff base ligand ⁵Cl-L and thiocyanato and selenocyanato as coligands. ⁵Cl-L, as an asymmetric {N₃O₂} donor Schiff base, was synthesized by a condensation reaction of 5-chlorosalicyladehyde using the asymmetric N-(2-aminoethyl)-1,3-propanediamine. The complexes exhibited a spin crossover at 280 (1) and 293 K (2), respectively, and were subjected to electron spin resonance (ESR) and Mössbauer spectroscopy at 77, 295 and 325 K. Ab initio CASSCF calculations followed by the NEVPT2 method were applied for predicting the g-tensor components as well as Mössbauer parameters. Full article

Background: In tissue engineering, developing injectable hydrogels with tailored mechanical and bioactive properties remains a challenge. This study introduces an injectable hydrogel composite for soft tissue regeneration, composed of oxidized alginate (OA) and N-succinyl chitosan (NSC) cross-linked via Schiff base reaction, reinforced with graphene oxide (GOx) and cyclic arginylglycylaspartic acid (c-RGD). The objective was to create a multifunctional platform combining injectability, bioactivity, and structural stability. Methods: The OA/NSC/GOx-cRGD hydrogel was synthesized through Schiff base cross-linking (aldehyde-amine reaction). Characterization included FTIR (C=N bond at 1650 cm⁻¹), Raman spectroscopy (D/G bands at 1338/1567 cm⁻¹), SEM (porous microstructure), and rheological analysis (shear-thinning behavior). In vitro assays assessed fibroblast viability (MTT) and macrophage TNF-α secretion (ELISA), while ex-vivo injectability and retention were evaluated using chicken cardiac tissue. Results: The hydrogel exhibited shear-thinning behavior (viscosity: 10 to <1 Pa·s) and elastic-dominated mechanics (G′ > G″), ensuring injectability. SEM revealed an interconnected porous structure mimicking native extracellular matrix. Fibroblast viability remained ≥95%, and TNF-α secretion in macrophages decreased by 80% (30 vs. 150 pg/μL in controls), demonstrating biocompatibility and anti-inflammatory effects. The hydrogel adhered stably to cardiac tissue without leakage. Conclusions: The OA/NSC/GOx-cRGD composite integrates injectability, bioactivity, and structural stability, offering a promising scaffold for tissue regeneration. Its modular design allows further functionalization with peptides or growth factors. Future work will focus on translational applications, including scalability and optimization for dynamic biological environments. Full article

The separation of high-viscosity oil–water emulsions remains a global challenge due to ultra-stable interfaces and severe membrane fouling. In this paper, SiO₂ micro–nanoparticles coated with polyethyleneimine (PEI) were initially loaded onto a stainless steel substrate. This dual-functional design simultaneously modifies surface roughness and wettability. Furthermore, a covalent crosslinking network was created through the Schiff base reaction between PEI and glutaraldehyde (GA) to enhance the stability of the membrane. The membrane exhibits extreme wettability, superhydrophilicity (WCA = 0°), and underwater superoleophobicity (UWOCA = 156.9°), enabling a gravity-driven separation of pump oil emulsions with 99.9% efficiency and a flux of 1006 L·m⁻²·h⁻¹. Moreover, molecular dynamics (MD) simulations demonstrate that the SiO₂-PEI-GA-modified membrane promotes the formation of a stable hydration layer, reduces the oil–layer interaction energy by 85.54%, and exhibits superior underwater oleophobicity compared to the unmodified SSM. Efficiency is maintained at 99.8% after 10 cycles. This study provides a scalable strategy that combines covalent crosslinking with hydrophilic particle modification, effectively addressing the trade-off between separation performance and membrane longevity in the treatment of viscous emulsions. Full article

This study describes the synthesis of O-alkylated benzaldehydes 1–8, Schiff bases 9–28, and benzoxazole derivatives 29–48 using microwave, ultrasound, and mechanochemical reactions, as well as reactions in deep eutectic solvents in excellent yields, and their antiproliferative and antibacterial activities. The in vitro evaluation of antiproliferative activity for the newly synthesised benzoxazole derivatives 29–48 against a diverse panel of human cancer cell lines, such as LN-229, Capan-1, HCT-116, NCI-H460, DND-41, HL-60, K-562, and Z-138 demonstrated that the majority of these benzoxazole derivatives displayed promising anticancer activity, particularly against non-small cell lung cancer (NSCLC) cells (NCI-H460). Notably, several derivatives showed enhanced activity compared to the included reference drug, etoposide. Considering the influence of substituents at position 5 of the benzoxazole ring and positions 3 and 4 of the phenyl ring on the antiproliferative activity, it is evident that derivatives 41–48 bearing a methoxy group at position 3 generally exhibit higher activity compared to compounds 29–40, which lack substitution at position 3. Furthermore, derivatives substituted at position 4 with a morpholine substituent, as well as those with an N,N-diethyl group, exhibited higher activity compared to other evaluated benzoxazole derivatives. The in vitro antibacterial evaluation against Gram-positive and Gram-negative bacteria revealed that benzoxazole derivative 47 exhibited notable activity, against the Gram-negative bacterium Pseudomonas aeruginosa (MIC = 0.25 μg/mL) and the Gram-positive bacterium Enterococcus faecalis (MIC = 0.5 μg/mL). The results point out that this class of benzoxazoles can be efficiently synthesized using eco-friendly methods and represent promising candidates for further design and optimization aimed at developing potent antiproliferative agents. Full article

Chitosan (CS), a versatile biopolymer obtained through the deacetylation of chitin, has gained significant interest in biomedical and pharmaceutical applications due to its biocompatibility, biodegradability, and unique gel-forming capabilities. This review comprehensively analyzes CS-based gel development, covering its extraction from various natural sources, gelation mechanisms, and biomedical applications. Different extraction methods, including chemical, biological, and green techniques, are discussed regarding efficiency and sustainability. The review explores the physicochemical properties of CS that influence its gelation behavior, highlighting various gelation mechanisms such as physical, ionic, and chemical cross-linking. Recent advances in gel formation, including Schiff base reactions, Diels–Alder click chemistry, and thermosensitive gelation, have expanded the applicability of CS hydrogels. Furthermore, CS-based gels have demonstrated potential in wound healing, tissue engineering, drug delivery, and antimicrobial applications, offering controlled drug release, enhanced biocompatibility, and tunable mechanical properties. The incorporation of nanomaterials, bioactive molecules, and functional cross-linkers has further improved hydrogel performance. The current review underscores the growing significance of CS-based gels as innovative biomaterials in regenerative medicine and pharmaceutical sciences. Full article

Wound healing is a complex biological process involving inflammation, proliferation, and remodeling phases. Effective healing is essential for maintaining skin integrity, driving the need for advanced materials like hydrogels, known for their high water retention and tunable mechanical properties. In this study, we synthesized a biocompatible composite hydrogel composed of γ-polyglutamic acid (γ-PGA) and ε-polylysine (ε-PL) through a Schiff base reaction, forming a stable crosslinked network. Its physicochemical properties, including rheological behavior and swelling capacity, were systematically evaluated. Biocompatibility was assessed via in vitro hemolysis and cytotoxicity assays, and in vivo testing was performed using a full-thickness skin defect model in Sprague Dawley (SD) rats to evaluate wound-healing efficacy. The PGA-PL hydrogel demonstrated excellent physicochemical properties, with a maximum swelling ratio of 65.6%, and biocompatibility as evidenced by low hemolysis rates (<5%) and high cell viability (>80%). It promoted wound healing by inhibiting the inflammatory response, reducing levels of the inflammatory cytokine IL-6, enhancing angiogenesis, and accelerating collagen deposition. The hydrogel showed complete biodegradation within 21 days in vivo without inducing a significant inflammatory response and significantly accelerated wound healing, achieving an 86% healing rate within 7 days compared to 67% in the control group. The PGA-PL composite hydrogel exhibits excellent mechanical strength and biocompatibility, and its effective wound-healing capabilities lay the groundwork for future development and optimization in various tissue engineering applications. Full article

A pseudo-multicomponent one-pot protocol for the synthesis of 1,3-disubstituted imidazolidin-2-one is described, employing trans-(R,R)-diaminocyclohexane for the in situ formation of the Schiff base, followed by reduction to produce the respective diamine and cyclization with carbonyldiimidazole (CDI). This approach utilizes statistical analysis to optimize the reaction conditions, allowing a pseudo-multicomponent protocol to be proposed. The developed method demonstrates sustainability, efficiency, and potential applications in green chemistry, achieving yields ranging from 55% to 81%. This represents a significant advance in synthesizing heterocyclic compounds with biological and pharmacological applications. Full article